Description
In the Linux kernel, the following vulnerability has been resolved:
ext4: use fsdata to track inline data write state and fix race
Instead of checking the live inode state (ext4_has_inline_data(inode)
and ext4_test_inode_state(inode, EXT4_STATE_MAY_INLINE_DATA)) in the
write_end handlers, use the fsdata parameter of the address space
operations to explicitly pass down the state in which write_begin
prepared the write.
A concurrent thread (such as ext4_page_mkwrite()) can convert the
inline data to an extent between write_begin and write_end. If this
happens, the write_end handlers would previously miss the inline
write_end path and fall through to extent-based write_end logic.
However, since block buffers were never allocated in write_begin,
this resulted in NULL pointer dereferences or data loss because
folio_buffers(folio) was NULL.
Define EXT4_WRITE_DATA_INLINE (4) as a bit flag (Bit 2), treating
fsdata as bitwise flags rather than mutually exclusive enums to keep
states of the write path independent. Communicate this state via
fsdata:
1) ext4_write_begin() and ext4_da_write_begin() set the
EXT4_WRITE_DATA_INLINE bit in *fsdata via bitwise OR when an inline
write is successfully prepared.
2) On entry, ext4_write_begin() clears the EXT4_WRITE_DATA_INLINE bit
to safely handle VFS retries (where generic_perform_write() bypasses
the fsdata initialization on its retry jump).
3) The write_end handlers perform a bitwise AND to check if the
EXT4_WRITE_DATA_INLINE bit is set and invoke the inline write_end
helper accordingly.
Furthermore, during a buffered write, ext4_write_inline_data_end()
acquires the xattr lock after preparing the write. If a concurrent
page fault (ext4_page_mkwrite()) converts the inline data to an extent
after the write_end handlers check the state but before
ext4_write_inline_data_end() acquires the xattr write lock, the
subsequent check will trigger a kernel panic via
BUG_ON(!ext4_has_inline_data(inode)).
To keep git history working and bisectability clean, replace the
BUG_ON check in ext4_write_inline_data_end() with a graceful error-
handling retry path in this same commit. If the inline data is cleared
after locking the xattr, we safely release all resources (releasing
iloc.bh, unlocking/putting the folio, stopping the active journal
transaction handle) and return 0 (VFS retry) to let the generic write
path retry the operation safely.
ext4: use fsdata to track inline data write state and fix race
Instead of checking the live inode state (ext4_has_inline_data(inode)
and ext4_test_inode_state(inode, EXT4_STATE_MAY_INLINE_DATA)) in the
write_end handlers, use the fsdata parameter of the address space
operations to explicitly pass down the state in which write_begin
prepared the write.
A concurrent thread (such as ext4_page_mkwrite()) can convert the
inline data to an extent between write_begin and write_end. If this
happens, the write_end handlers would previously miss the inline
write_end path and fall through to extent-based write_end logic.
However, since block buffers were never allocated in write_begin,
this resulted in NULL pointer dereferences or data loss because
folio_buffers(folio) was NULL.
Define EXT4_WRITE_DATA_INLINE (4) as a bit flag (Bit 2), treating
fsdata as bitwise flags rather than mutually exclusive enums to keep
states of the write path independent. Communicate this state via
fsdata:
1) ext4_write_begin() and ext4_da_write_begin() set the
EXT4_WRITE_DATA_INLINE bit in *fsdata via bitwise OR when an inline
write is successfully prepared.
2) On entry, ext4_write_begin() clears the EXT4_WRITE_DATA_INLINE bit
to safely handle VFS retries (where generic_perform_write() bypasses
the fsdata initialization on its retry jump).
3) The write_end handlers perform a bitwise AND to check if the
EXT4_WRITE_DATA_INLINE bit is set and invoke the inline write_end
helper accordingly.
Furthermore, during a buffered write, ext4_write_inline_data_end()
acquires the xattr lock after preparing the write. If a concurrent
page fault (ext4_page_mkwrite()) converts the inline data to an extent
after the write_end handlers check the state but before
ext4_write_inline_data_end() acquires the xattr write lock, the
subsequent check will trigger a kernel panic via
BUG_ON(!ext4_has_inline_data(inode)).
To keep git history working and bisectability clean, replace the
BUG_ON check in ext4_write_inline_data_end() with a graceful error-
handling retry path in this same commit. If the inline data is cleared
after locking the xattr, we safely release all resources (releasing
iloc.bh, unlocking/putting the folio, stopping the active journal
transaction handle) and return 0 (VFS retry) to let the generic write
path retry the operation safely.
Published:
2026-09-17
Score:
n/a
EPSS:
n/a
KEV:
No
Analysis
Analysis and contextual insights are available on OpenCVE Cloud.
Default status is the baseline for the product, each version can override it (e.g. patched versions marked unaffected).
| Vendor | Product | Default status | Versions | ||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Linux | Linux | unaffected |
|
||||||||||||||||||
| Linux | Linux | affected |
|
No data.
No data.
No data available yet.
Remediation
No vendor fix or workaround currently provided.
Additional remediation guidance may be available on OpenCVE Cloud.
Tracking
Sign in to view the affected projects.
Advisories
No advisories yet.
References
History
Thu, 17 Sep 2026 16:30:00 +0000
| Type | Values Removed | Values Added |
|---|---|---|
| Description | In the Linux kernel, the following vulnerability has been resolved: ext4: use fsdata to track inline data write state and fix race Instead of checking the live inode state (ext4_has_inline_data(inode) and ext4_test_inode_state(inode, EXT4_STATE_MAY_INLINE_DATA)) in the write_end handlers, use the fsdata parameter of the address space operations to explicitly pass down the state in which write_begin prepared the write. A concurrent thread (such as ext4_page_mkwrite()) can convert the inline data to an extent between write_begin and write_end. If this happens, the write_end handlers would previously miss the inline write_end path and fall through to extent-based write_end logic. However, since block buffers were never allocated in write_begin, this resulted in NULL pointer dereferences or data loss because folio_buffers(folio) was NULL. Define EXT4_WRITE_DATA_INLINE (4) as a bit flag (Bit 2), treating fsdata as bitwise flags rather than mutually exclusive enums to keep states of the write path independent. Communicate this state via fsdata: 1) ext4_write_begin() and ext4_da_write_begin() set the EXT4_WRITE_DATA_INLINE bit in *fsdata via bitwise OR when an inline write is successfully prepared. 2) On entry, ext4_write_begin() clears the EXT4_WRITE_DATA_INLINE bit to safely handle VFS retries (where generic_perform_write() bypasses the fsdata initialization on its retry jump). 3) The write_end handlers perform a bitwise AND to check if the EXT4_WRITE_DATA_INLINE bit is set and invoke the inline write_end helper accordingly. Furthermore, during a buffered write, ext4_write_inline_data_end() acquires the xattr lock after preparing the write. If a concurrent page fault (ext4_page_mkwrite()) converts the inline data to an extent after the write_end handlers check the state but before ext4_write_inline_data_end() acquires the xattr write lock, the subsequent check will trigger a kernel panic via BUG_ON(!ext4_has_inline_data(inode)). To keep git history working and bisectability clean, replace the BUG_ON check in ext4_write_inline_data_end() with a graceful error- handling retry path in this same commit. If the inline data is cleared after locking the xattr, we safely release all resources (releasing iloc.bh, unlocking/putting the folio, stopping the active journal transaction handle) and return 0 (VFS retry) to let the generic write path retry the operation safely. | |
| Title | ext4: use fsdata to track inline data write state and fix race | |
| First Time appeared |
Linux
Linux linux Kernel |
|
| CPEs | cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:* | |
| Vendors & Products |
Linux
Linux linux Kernel |
|
| References |
|
MITRE
Status: PUBLISHED
Assigner: Linux
Published:
Updated: 2026-09-17T16:10:14.073Z
Reserved: 2026-09-16T12:21:13.871Z
Link: CVE-2026-92500
Vulnrichment
No data.
NVD
Status : Received
Published: 2026-09-17T17:17:52.400
Modified: 2026-09-17T17:17:52.400
Link: CVE-2026-92500
Redhat
No data.
OpenCVE Enrichment
No data.
Weaknesses
No weakness.