Export limit exceeded: 15493 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (15493 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-15579 | 1 Moxa | 1 Tn-4500b Series | 2026-09-18 | N/A |
| An out-of-bounds write vulnerability exists in some of the Ethernet switches because of improper validation of the username field length during Web login processing. This may allow a remote attacker to submit a specially crafted overly long input, triggering a buffer overflow that can cause the authentication process to crash and result in a Denial of Service (DoS) attack. | ||||
| CVE-2026-81627 | 1 Redhat | 4 Enterprise Linux, Enterprise Linux Nvidia, Openshift and 1 more | 2026-09-18 | 6.7 Medium |
| A flaw was found in QEMU. The VAPIC setup hypercall in hw/i386/vapic.c does not validate that the writable RAM alias remains within the option ROM window. A privileged guest user on a Q35/KVM machine can position this alias over locked SMRAM, bypassing chipset D_LCK protection and injecting code into System Management Mode memory. | ||||
| CVE-2026-89834 | 1 Linux | 1 Linux Kernel | 2026-09-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to migrate all curseg types during free_segment_range In free_segment_range(), the curseg evacuation loop only iterates up to NR_CURSEG_PERSIST_TYPE (0..5), missing non-persistent in-memory curseg types such as CURSEG_COLD_DATA_PINNED and CURSEG_ALL_DATA_ATGC. Even though these in-memory curseg types are not saved in the on-disk checkpoint header, they still occupy active physical segments at runtime. If an active in-memory curseg happens to be allocated within the segment range being truncated during filesystem shrink, failing to evacuate it will cause subsequent writes to the curseg attempting out-of-bounds I/O on the truncated storage range. Fix this by expanding the curseg evacuation loop upper bound to NR_CURSEG_TYPE to ensure all active curseg types are safely migrated out of the target range. | ||||
| CVE-2026-89873 | 1 Linux | 1 Linux Kernel | 2026-09-18 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: media: v4l2-ctrls: validate HEVC EXT SPS RPS counts The HEVC SPS control carries the short-term and long-term RPS counts that decoder drivers use to walk the matching EXT SPS dynamic arrays. Reject SPS values that exceed the HEVC limits of 64 short-term sets and 32 long-term references so drivers cannot later index beyond those controls. Also reject EXT SPS ST RPS entries whose negative or positive picture counts exceed the 16-entry arrays, or whose combined delta-POC count exceeds the HEVC DPB maximum. | ||||
| CVE-2026-19387 | 1 Redhat | 8 Enterprise Linux, Enterprise Linux Eus, Rhel Aus and 5 more | 2026-09-18 | 7.6 High |
| A heap out-of-bounds write vulnerability was found in the GStreamer gst-plugins-bad adpcmdec element when decoding IMA/DVI ADPCM audio. Insufficient validation of the per-block sample count for multi-channel streams allows a crafted WAV file to cause writes beyond the allocated output buffer. This can lead to application crash, denial of service, memory corruption, or potentially arbitrary code execution when untrusted media is processed. | ||||
| CVE-2026-89905 | 1 Linux | 1 Linux Kernel | 2026-09-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: LoongArch: BPF: Move arena register slot below TCC context Currently, the stack layout places the optional arena register slot above the tail call counter context. When arena_vm_start is dynamically enabled, it shifts the relative offset of the tcc_ptr slot within the stack frame, causing hardcoded tracking macros to mismatch and leading to memory misalignment or corruption potentially. To fix this, move the arena register save and restore sequences below the tail call counter context slots in both build_prologue() and the epilogue. Update __build_epilogue() to insert a proper offset decrement to safely skip the unneeded tcc_ptr reading block while accurately aligning with the relocated arena slot at the very bottom. With this patch, the tcc_ptr slot is always positioned at a fixed distance directly underneath the base callee-saved registers that is independent of whether the arena features are on. | ||||
| CVE-2026-89907 | 1 Linux | 1 Linux Kernel | 2026-09-18 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: LoongArch: KVM: Validate MSI data before routing it to EIOINTC pch_msi_set_irq() passes e->msi.data straight into eiointc_set_irq() as the irq number. The MSI data comes from userspace, that either via a KVM_IRQ_ROUTING_MSI entry set with KVM_SET_GSI_ROUTING (used by irqfd and KVM_IRQ_LINE) or directly via KVM_SIGNAL_MSI, and is never checked against EIOINTC_IRQS. eiointc_set_irq() uses the value with __set_bit()/__clear_bit() on the 256-bit isr bitmap, eiointc_update_irq() then indexes sw_coremap[] and the per-cpu coreisr/sw_coreisr bitmaps with it. Therefore a data value >= 256 reads and writes memory past the end of those arrays, i.e. any process holding a VM fd can corrupt kernel memory beyond the allocation of loongarch_eiointc. Reject MSI data that doesn't fit in the EIOINTC irq space. The DMSINTC path is unaffected as it decodes the vector from the address and masks it. | ||||
| CVE-2026-89920 | 1 Linux | 1 Linux Kernel | 2026-09-18 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: KVM: s390: Fix memory corruption by not reinjecting CK machine checks Channel-subsystem damage machine checks are for the host channel subsystem. The guest channel subsystem is emulated in the userspace VMM. There is no point in forwarding such machine checks into the guest. This also simplifies the machine check reinjection and avoids kfree of a stack variable as reported by sashiko. There might be still machine checks that have the ck bit set with another bit (like instruction damage), mask out the CK bit in s390_backup_mcck_info(), like the CP and ED bits already are. | ||||
| CVE-2026-90000 | 1 Linux | 1 Linux Kernel | 2026-09-18 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: HID: rmi: fix OOB access with undersized RMI reports The hid-rmi driver sizes its writeReport/readReport buffer purely from the report descriptor supplied by the device, with no minimum bound: data->input_report_size = hid_report_len(input_report); data->output_report_size = hid_report_len(output_report); alloc_size = data->output_report_size + data->input_report_size; data->writeReport = devm_kzalloc(&hdev->dev, alloc_size, GFP_KERNEL); data->readReport = data->writeReport + data->output_report_size; but then reads and writes fixed offsets into it. A device declaring a 1-byte output and a 1-byte input report makes hid_report_len() return 2 for each, so alloc_size is 4, while rmi_set_page() -- reached unconditionally at probe time through rmi_input_configured() -- stores writeReport[4] and rmi_hid_read_block() stores writeReport[0..5]. Since readReport lives at writeReport + output_report_size, those stores also corrupt the window the next reply is parsed out of. The read path is worse: the copy length comes from readReport[1], which the device fills in and can be up to 255, and the copy starts at &readReport[2] with no regard for input_report_size, so it runs past the end of the allocation into adjacent slab objects. This does not even need a lying device -- rmi_f01_probe() issues a fixed 21-byte register read, so any device declaring an input report smaller than 23 bytes reads out of bounds even when it answers truthfully. Those bytes become the register values the RMI core acts on: rmi_f01_probe() prints them to the kernel log as the product id and exports them through the mode 0444 sysfs attribute of the same name, and rmi_driver_set_irq_bits() sends them back to the device as the interrupt mask, so an undersized report descriptor leaks heap contents both to unprivileged userspace and to the device itself. The write path has no bound either: rmi_hid_write_block() copies an unbounded len to &writeReport[4], and the largest caller a device can drive at probe time is rmi_driver_set_irq_bits(), whose length is derived from the interrupt source counts the device declares in its Page Description Table. Finally, the read loop cannot terminate on a zero-length reply: such a reply copies nothing and advances neither bytes_read nor bytes_needed, and because a reply did arrive the one second wait_event_timeout() does not fire either, so a device answering 0 forever keeps the loop running inside the probe worker with page_mutex held. khungtaskd does not notice, because every reply wakes the task. Reject reports too small for what the driver builds -- 6 output bytes for the write reports and 3 input bytes for the read handshake -- at probe time, clamp the write and the read copy to the report sizes the device declared, and treat a zero-length reply as an error. A device refused this way is started as an ordinary HID device, like one that does not carry the RMI report ids at all. RMI_DEVICE must not be left set in device_flags on that path, because rmi_input_configured() would then run the RMI setup and reach rmi_set_page(), which writes the writeReport buffer the refusal just skipped allocating. The bit can arrive set: rmi_probe() copies id->driver_data into device_flags before the report checks, and a bind through the new_id sysfs attribute can supply driver_data with RMI_DEVICE (BIT(0)) set. Strip the bit where driver_data is copied, so RMI_DEVICE keeps meaning exactly "this probe validated the reports"; the three jumps to start that predate this patch are covered as well. The error path also clears RMI_READ_DATA_PENDING on its way out, because that flag is what the wait at the top of the loop tests: leaving it set would make every later wait_event_timeout() return immediately on the stale reply and kill the read path for the rest of the device's life. Clamping does not regress working hardware: the read loop already handles ---truncated--- | ||||
| CVE-2026-73639 | 2026-09-18 | N/A | ||
| Imager::File::PNG versions from 1.003 before 1.004 for Perl write past the end of the row buffer reading a PNG with a tRNS transparency chunk in read_direct8. With a tRNS chunk, read_direct8() adds an alpha channel to the image it creates but still sizes the row buffer from the original channel count. libpng expands the transparency into that extra channel, so png_read_row() fills one channel more than the buffer holds, at one byte per sample, and writes width bytes past the end of the allocation. Palette images go to read_paletted() and 16-bit images to read_direct16(), which sizes its buffer from png_get_rowbytes() and allocates enough for the expanded row. The same reader ships bundled in the Imager distribution. Reading an attacker-supplied PNG through Imager->read() corrupts the heap, which can crash the process. | ||||
| CVE-2026-93452 | 1 Xerial | 1 Snappy-java | 2026-09-17 | 7.5 High |
| snappy-java through 1.1.10.8 contains a buffer overflow vulnerability in Snappy.compress(ByteBuffer, ByteBuffer) that writes past the end of the destination buffer. Attackers can supply incompressible data that exceeds the destination buffer's remaining capacity, corrupting off-heap memory and causing JVM termination. | ||||
| CVE-2026-93451 | 1 Xerial | 1 Snappy-java | 2026-09-17 | 6.5 Medium |
| snappy-java through 1.1.10.8 contains a buffer overflow vulnerability in typed Snappy.uncompress*Array methods that allocate output arrays by dividing uncompressed length by element size but pass the undivided length to native code. Attackers controlling compressed input can cause misaligned length values to write past array bounds with attacker-controlled bytes, corrupting heap memory. | ||||
| CVE-2026-84611 | 1 Apple | 7 Ios And Ipados, Ipados, Iphone Os and 4 more | 2026-09-17 | 7.3 High |
| An out-of-bounds write issue was addressed with improved bounds checking. This issue is fixed in iOS 26.7 and iPadOS 26.7, iOS 27 and iPadOS 27, macOS Golden Gate 27, macOS Sequoia 15.8, macOS Tahoe 26.7, tvOS 27, visionOS 27, watchOS 27. Processing a maliciously crafted 3D model may lead to memory corruption. | ||||
| CVE-2026-43761 | 1 Apple | 1 Macos | 2026-09-17 | 6.5 Medium |
| An out-of-bounds write issue was addressed with improved bounds checking. This issue is fixed in macOS Sequoia 15.7.8, macOS Sonoma 14.8.8, macOS Tahoe 26.6. Mounting a malicious disk image may cause unexpected system termination. | ||||
| CVE-2026-84575 | 1 Apple | 7 Ios And Ipados, Ipados, Iphone Os and 4 more | 2026-09-17 | 7.8 High |
| An out-of-bounds write issue was addressed with improved bounds checking. This issue is fixed in iOS 27 and iPadOS 27, macOS Golden Gate 27, macOS Sequoia 15.8, macOS Tahoe 26.7, tvOS 27, visionOS 27, watchOS 27. Processing a maliciously crafted file may lead to unexpected app termination. | ||||
| CVE-2026-86876 | 1 Apple | 6 Ios And Ipados, Ipados, Iphone Os and 3 more | 2026-09-17 | 5.2 Medium |
| An out-of-bounds write issue was addressed with improved bounds checking. This issue is fixed in iOS 26.7 and iPadOS 26.7, iOS 27 and iPadOS 27, macOS Golden Gate 27, macOS Sequoia 15.8, macOS Tahoe 26.7, visionOS 27, watchOS 27. A sandboxed process may be able to circumvent sandbox restrictions. | ||||
| CVE-2026-24073 | 1 Qualcomm | 1 Snapdragon | 2026-09-17 | 7.8 High |
| Memory corruption when processing decode statistics due to insufficient validation of offset against structure size. | ||||
| CVE-2026-54634 | 2026-09-17 | 7.3 High | ||
| Hamlib is a ham radio control library for radios, rotators, and amplifiers. Prior to 4.7.2, the unauthenticated rigctld send_raw command on TCP port 4532 reaches rigctl_send_raw() in tests/rigctl_parse.c, which writes a NUL byte at buf[buf_len + 1] outside its 200-byte stack buffer, and rig_send_raw() in src/rig.c, which copies reply_len - 1 bytes instead of the actual nbytes received. A remote client can send the CR terminator with a short payload to trigger both flaws in one command under the default no-password configuration. The out-of-bounds write can crash the daemon or corrupt adjacent stack memory, while the oversized copy can return up to 198 bytes of uninitialized stack data to the client. This issue is fixed in version 4.7.2. | ||||
| CVE-2026-93015 | 1 Bluekitchen | 1 Btstack | 2026-09-17 | 6.3 Medium |
| BlueKitchen BTstack through 1.8.2 fails to validate the peer-reported endpoint count against table bounds in A2DP stream endpoint discovery. A bonded peer can send an AVDTP DISCOVER response with more endpoints than the fixed table holds, causing out-of-bounds writes that corrupt adjacent static objects and crash the process or sever event delivery. | ||||
| CVE-2026-86107 | 1 Arista | 2 Velocloud, Velocloud Gateway | 2026-09-17 | 5.9 Medium |
| The VeloCloud Edge and Gateway exhibit an out-of-bounds write vulnerability when processing tunneled IP fragments between authenticated overlay neighbors. This vulnerability impacts the VeloCloud VCMP tunnel protocol only. A successful exploit can cause the affected process to terminate and restart, leading to a temporary disruption of traffic. Hosts on the internet that are unauthenticated and unable to form an overlay peer relationship can not trigger the vulnerable logic. | ||||