Export limit exceeded: 395622 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (395622 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-90276 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: md/md-llbitmap: stop daemon timer rearm on destroy llbitmap_destroy() deletes pending_timer before flushing md_llbitmap_io_wq. However, daemon_work can still be queued or running after the timer has been deleted, and the daemon path can arm pending_timer again when it finds dirty chunks that are not ready to flush yet. If that happens during teardown, pending_timer can remain armed after llbitmap is freed and later dereference freed memory. Add a BITMAP_SHUTDOWN bit to llbitmap->flags, set it before deleting the timer, and make the timer and daemon paths stop queueing or rearming work once teardown starts. Cancel daemon_work before flushing the shared workqueue so no already queued daemon instance can race with the free. Use timer_shutdown_sync() so a daemon instance that passed the shutdown check before teardown cannot rearm the timer afterward. BITMAP_SHUTDOWN is a runtime-only state. Mask it out when reading and updating the llbitmap superblock so the shutdown state is never loaded from disk or persisted to disk. | ||||
| CVE-2026-90329 | 1 Linux | 1 Linux Kernel | 2026-09-19 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: HID: synchronize input before cleaning up a failed probe hid_device_io_start() allows reports to run concurrently with probe. If the probe subsequently fails, __hid_device_probe() releases driver resources and clears hdev->driver without first excluding those report callbacks. For example, a report may enter hidraw_report_event() while the failure path frees the associated hidraw object, leading to a use-after-free when the report takes the object's list lock. Stop input before performing failed-probe cleanup. This reacquires driver_input_lock and waits for any report callback already in progress. | ||||
| CVE-2026-90335 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: tty: skip cdev_del() when no cdev is registered TTY device registration can fail before a cdev is allocated. Serial core keeps the port so setserial can still use it, and later removal passes the NULL cdev slot to cdev_del(), causing a NULL-pointer dereference. Only delete the cdev when the slot is not NULL. | ||||
| CVE-2026-90349 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7996: fix out-of-bounds link array access in mt7996_tx() When mac80211 leaves the link unspecified, mt7996_tx() substitutes the primary link id of the station or vif. That value is IEEE80211_LINK_UNSPECIFIED (0xf) until the first link has been added, and it is then used unchecked to index vif->link_conf[], mvif->mt76.link[] and sta->link[], all of which hold IEEE80211_MLD_MAX_NUM_LINKS (15) entries. Clamp the primary link id to the default link before using it, and use the clamped value for the link_sta fallback as well. | ||||
| CVE-2026-90360 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: regulator: core: use system_freezable_wq for init complete work schedule_delayed_work() uses system_wq, which is non-freezable, allowing regulator_init_complete_work to run concurrently with system suspend. This work fires ~30s after boot to disable unused regulators via I2C. When it races with PM suspend, the I2C adapter may already be suspended, triggering a -ESHUTDOWN warning in __i2c_transfer(): WARNING: ... at __i2c_transfer+0x36c/0x3c8 Call trace: __i2c_transfer i2c_transfer regmap_i2c_write _regmap_update_bits regulator_disable_regmap _regulator_do_disable regulator_late_cleanup regulator_init_complete_work_function process_one_work Switch to system_freezable_wq so the work is frozen before any device is suspended, eliminating the race. | ||||
| CVE-2026-90363 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/msm: don't tear down KMS twice when KMS init fails When priv->kms_init() (mdp4_kms_init() / mdp5_kms_init()) fails partway through, both display drivers already tear their KMS state down via mdp4_destroy() / mdp5_kms_destroy() before returning the error. The common error path in msm_drm_init() then runs msm_drm_uninit() -> msm_drm_kms_uninit(), which tries to destroy the very same KMS a second time, which causes a use-after-free crash. Bring MDP4/MDP5 in line with the DPU driver whose dpu_kms_init() doesn't perform error cleanup on the failure. Let the common path own the cleanup, instead of freeing the KMS from their error paths. The crash trace for the reference: __lock_acquire from lock_acquire (kernel/locking/lockdep.c:5906 kernel/locking/lockdep.c:5863) lock_acquire from touch_wq_lockdep_map (kernel/workqueue.c:4094 (discriminator 1)) touch_wq_lockdep_map from __flush_workqueue (kernel/workqueue.c:4136) __flush_workqueue from msm_drm_kms_uninit (drivers/gpu/drm/msm/msm_kms.c:243 (discriminator 33)) msm_drm_kms_uninit from msm_drm_uninit (drivers/gpu/drm/msm/msm_drv.c:93) msm_drm_uninit from msm_drm_init (drivers/gpu/drm/msm/msm_drv.c:184) msm_drm_init from try_to_bring_up_aggregate_device (drivers/base/component.c:249 drivers/base/component.c:227) try_to_bring_up_aggregate_device from __component_add (drivers/base/component.c:269 drivers/base/component.c:748) __component_add from dsi_host_attach (drivers/gpu/drm/msm/dsi/dsi_host.c:1739) dsi_host_attach from mipi_dsi_attach (drivers/gpu/drm/drm_mipi_dsi.c:383) mipi_dsi_attach from sharp_nt_panel_probe (drivers/gpu/drm/panel/panel-sharp-ls043t1le01.c:247) Patchwork: https://patchwork.freedesktop.org/patch/742068/ | ||||
| CVE-2026-90366 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7996: reserve space for the CSA-abort countdown TLV When a CSA countdown is active, mt7996_mcu_beacon_cntdwn() emits two bss_bcn_cntdwn_tlv entries (the CSA countdown and the CCA-abort BCC), but MT7996_BEACON_UPDATE_SIZE only reserved one. With MBSSID enabled and a near-maximum beacon template the extra 8 bytes could push the offload command past MT7996_MAX_BSS_OFFLOAD_SIZE and trigger skb_over_panic(). Reserve room for both countdown TLVs. | ||||
| CVE-2026-90368 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7915: unwind state on add_interface failure When mt76_wcid_alloc() fails, mt7915_add_interface() returned without clearing the vif_mask/omac_mask bits it had already set, without removing the firmware dev info added earlier, and without clearing a monitor_vif pointer to the vif mac80211 is about to free. mac80211 does not call remove_interface() for a failed add, so the indices and firmware dev entry leaked permanently and testmode could dereference the stale monitor_vif. Add a proper error unwind. | ||||
| CVE-2026-88097 | 1 Microsoft | 1 Edge Chromium | 2026-09-19 | 8.1 High |
| Use after free in Microsoft Edge (Chromium-based) allows an unauthorized attacker to elevate privileges locally. | ||||
| CVE-2026-92483 | 1 Linux | 2 Kernel, Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: liveupdate: Remember FLB retrieve() status LUO keeps track of successful retrieve attempts on an FLB. It does so to avoid multiple retrievals of the same FLB. Multiple retrievals cause problems because once the FLB is retrieved, the serialized data structures are likely freed and the FLB is likely in a very different state from what the code expects. All this works well when retrieve succeeds. When it fails, luo_flb_retrieve_one() returns the error immediately, without ever storing anywhere that a retrieve was attempted or what its error code was. If the user attempts to retrieve another file registered with the same FLB, LUO will attempt to call the FLB's retrieve() callback again. The retry is problematic for much of the same reasons listed above. The FLB is likely in a very different state than what the retrieve logic normally expects (e.g. some KHO pages may have already been restored and freed). There is no sane way of attempting the retrieve again. Remember the error retrieve returned and directly return it on a retry. This is done by changing the retrieved bool to a retrieve_status integer. A value of 0 means retrieve was never attempted, a positive value means it succeeded, and a negative value means it failed and the error code is the value. This is similar to commit f85b1c6af5bc ("liveupdate: luo_file: remember retrieve() status") which did the same for LUO files. | ||||
| CVE-2026-76756 | 1 Drupal | 1 Gammu Sms Daemon | 2026-09-19 | 5.9 Medium |
| Vulnerability in Drupal Gammu SMS Daemon. This issue affects Gammu SMS Daemon versions: *.*. | ||||
| CVE-2026-76755 | 1 Drupal | 1 Gammu Sms Daemon | 2026-09-19 | 5.9 Medium |
| Vulnerability in Drupal Gammu SMS Daemon. This issue affects Gammu SMS Daemon versions: *.*. | ||||
| CVE-2026-90281 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: phy: qcom: snps-femto-v2: Fix possible NULL-deref on early runtime suspend Runtime PM must be enabled before creating the PHY, since phy_create() only enables runtime PM on the PHY device if it is already enabled on this parent device. However, the runtime PM callbacks dereference the hsphy instance, which is not yet ready, leaving a window where a suspend callback may trigger a NULL pointer dereference. Take a runtime PM usage reference with pm_runtime_get_noresume() before enabling runtime PM and release it once the PHY has been created, so that no runtime suspend can run before the PHY is ready. This also prevents a short window where an unnecessary runtime suspend can occur. Use the devres-managed version to ensure PM runtime is symmetrically disabled during driver removal for proper cleanup. | ||||
| CVE-2026-90283 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: hugetlbfs: release subpool on fill_super failure hugetlbfs_fill_super() allocates a hugepage subpool when size or min_size mount options are specified. hugepage_new_subpool() may also reserve huge pages for min_size. If root dentry creation fails after the subpool is created, the failure path frees the subpool with kfree(). This bypasses hugepage_put_subpool() and can leave min_size reservations charged. Use hugepage_put_subpool() on the failure path, matching the normal put_super path. | ||||
| CVE-2026-90284 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: firmware_loader: do not queue completed sysfs fallback requests fw_load_sysfs_fallback() calls device_add() before adding the fw_priv to pending_fw_head. device_add() publishes the fallback loading interface, so a userspace helper which discovers the device by scanning sysfs can write 0 to the loading attribute and complete the request before it is queued as pending. In that interleaving firmware_loading_store() calls fw_state_done() while pending_list still points to itself, so it cannot remove an entry from pending_fw_head. The subsequent unconditional list_add() then queues an already-completed fw_priv. Once the request is released, pending_fw_head can retain a pointer to freed memory and the next fallback request can fault while validating the list. Only in-flight fallback requests need suspend or reboot abort handling. If the request is already DONE after device_add(), return success from the fallback path without sending another uevent, waiting again, or queueing it as pending. This preserves the invariant that pending_fw_head contains only active fallback requests. | ||||
| CVE-2026-90299 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Fix sleepable check for tracing/lsm prog When CONFIG_FUNCTION_ERROR_INJECTION is disabled, a sleepable tracing prog is allowed to attach to '__x64_'-alike prefix symbols. It is because the verifier does not verify whether the symbol is a kernel function or a bpf prog. That said, a sleepable tracing prog is allowed to attach to a bpf prog target whose name has '__x64_'-alike prefix. For example, a sleepable fentry prog attaches to a '__x64_sys_nop' XDP prog, and copies buffer from a user pointer with bpf_copy_from_user() helper. After attaching the XDP prog to lo interface, the kernel BUG could be triggered by 'ping -c 1 -W 1 127.0.0.1': [ 3.460756] BUG: sleeping function called from invalid context at kernel/bpf/trampoline.c:1324 Fix it by disallowing sleepable prog always when its target btf is not a kernel's btf. | ||||
| CVE-2026-90301 | 1 Linux | 1 Linux Kernel | 2026-09-19 | 8.1 High |
| In the Linux kernel, the following vulnerability has been resolved: ocfs2: o2hb: quiesce negotiate handlers and timeout work Heartbeat regions publish struct o2hb_region as the private data for the NEGO_TIMEOUT and NEGO_APPROVE o2net handlers as soon as make_item() creates the configfs region. The approve handler can call o2hb_arm_timeout(), so a peer can touch the region timeout work before dev_store() has finished building the heartbeat runtime, or after teardown has started to shut that runtime back down. The final configfs put also has to keep reg alive until the last in-flight o2net callback drops its handler reference. o2net_unregister_handler_list() blocks future handler lookups, but it does not wait for sc_rx_work that already passed o2net_handler_get(). That drain needs to cover local listener teardown as well, where the o2net ordered workqueue may already be inside destroy_workqueue(). Fix the lifetime rule in both directions. Initialize the region delayed works before publishing reg through the o2net handler table, keep new or stopping regions non-armable with hr_stopping, and quiesce both delayed works on failed-start and teardown paths even when no heartbeat thread is left to call o2hb_disarm_timeout(). Then unregister handlers before tearing down handler-visible region state and make the drain wait for the active or destroying o2net ordered workqueue before release frees reg. The buggy scenario involves two paths, with each column showing the order within that path: region lifecycle: late negotiate callback: 1. make_item() registers the 1. o2net_process_message() gets a region handlers before heartbeat handler for reg. dev_store() has built a 2. The callback runs after the lookup runnable heartbeat context. lock is dropped and dereferences reg. 2. A failed start or rmdir 3. An approve or timeout path tries to stops the heartbeat thread, queue reg's delayed work, or release quiesces existing work, and races the callback body after handler drops the final configfs ref. unregister. 3. region_release() must drain 4. The callback or delayed work can handler-visible o2net rx work outlive reg unless lifecycle code before freeing reg. keeps the region non-armable and drains the active-or-destroying o2net workqueue. Validation reproduced this kernel report: KASAN slab-use-after-free in __run_timers+0x22c/0x5b0 Write of size 8 Call trace: dump_stack_lvl+0x66/0xa0 print_report+0xce/0x630 __run_timers+0x22c/0x5b0 kasan_report+0xe0/0x110 _raw_spin_unlock_irqrestore+0x27/0x60 try_to_wake_up+0x191/0xf70 timer_expire_remote+0xae/0xf0 run_timer_softirq+0x19b/0x1a0 handle_softirqs+0x156/0x660 __irq_exit_rcu+0xc4/0x160 irq_exit_rcu+0xe/0x20 sysvec_apic_timer_interrupt+0x6c/0x80 asm_sysvec_apic_timer_interrupt+0x1a/0x20 Allocated by task stack: kasan_save_stack+0x33/0x60 kasan_save_track+0x14/0x30 __kasan_kmalloc+0xaa/0xb0 o2hb_heartbeat_group_make_item+0x3c/0x600 | ||||
| CVE-2026-90316 | 1 Linux | 1 Linux Kernel | 2026-09-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/omap: dsi: Do not copy isr table To be able to unregister stuff from isrs, the corresponding table was copied. Nobody seems to unregister stuff that way, so it does not help. But there are stack-allocated objects passed to these isrs giving chances of UAF of these objects if irqs are unregistered while they are handled, so better do not copy that table. | ||||
| CVE-2026-90319 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: rapidio: clear mport->net when rio_add_net() fails rio_alloc_net() stores the newly allocated rio_net in mport->net before rio_scan_alloc_net() registers the device. If rio_add_net() fails, rio_scan_alloc_net() drops the device reference with put_device(), which releases the rio_net through the device release callback. However, mport->net is left pointing at the freed object. A later mport unregister path can then dereference the dangling mport->net pointer and may try to free the same rio_net again. Clear mport->net in the rio_add_net() failure path, matching the cleanup done for the destID table allocation failure path. | ||||
| CVE-2026-90321 | 1 Linux | 1 Linux Kernel | 2026-09-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ocfs2: validate inline xattrs during inode block validation Patch series "ocfs2: validate xattr entry bounds", v7. This series validates OCFS2 xattr entry name/value bounds when xattr metadata is read and validated, before getxattr() or listxattr() can walk out-of-range entry arrays or offsets from corrupted metadata. This patch (of 2): ocfs2_validate_inode_block() verifies a dinode before OCFS2 users walk metadata from it, but inline xattr metadata is still checked only in operation-specific consumers. The existing ibody lookup helper validates inline header placement and entry count, but inode block validation does not reject entry name/value bounds. Add a flat xattr entry validator and call it from inode block validation for inline xattrs. Keep the operation paths on their existing header/count lookup checks; the full entry bounds check now runs when the inode block is validated at read time. Reject corrupted inline xattr metadata before ocfs2_xattr_ibody_get() or listxattr() can walk past the inline storage. Validation reproduced this kernel report: BUG: KASAN: use-after-free in ocfs2_xattr_find_entry+0x5a/0x170 Read of size 2 at addr ffff8881242a2000 by task python3/529 Call Trace: dump_stack_lvl+0x66/0xa0 print_report+0xce/0x630 kasan_report+0xe0/0x110 ocfs2_xattr_find_entry+0x5a/0x170 ocfs2_xattr_get_nolock+0x20a/0x820 ocfs2_xattr_get+0x10c/0x1e0 __vfs_getxattr+0xe2/0x130 vfs_getxattr+0x185/0x1b0 | ||||