Export limit exceeded: 401118 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (401118 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-98150 | 1 Linux | 1 Linux Kernel | 2026-09-25 | 7 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Fix BPF_F_CPU validation for sparse CPU IDs BPF_F_CPU stores the target CPU ID in the upper 32 bits of the map operation flags. bpf_map_check_op_flags() currently compares that ID with num_possible_cpus(), which is the number of possible CPUs rather than a bound on CPU IDs. On an arm64 QEMU guest with a CPU device-tree hole, the possible CPU mask was 0,2-3. A userspace program using raw bpf() syscalls creates a BPF_MAP_TYPE_PERCPU_ARRAY and performs update and lookup operations for each CPU by setting BPF_F_CPU and the CPU ID in the flags. With the old check, CPU 1 is incorrectly accepted while valid CPU 3 is rejected with -ERANGE. The CPU 1 update then reaches the per-CPU map access path and triggers: Unable to handle kernel paging request at virtual address ... pc : __pi_memcpy_generic+0x5c/0x22c lr : bpf_percpu_array_update+0x2dc/0x2e8 Call trace: __pi_memcpy_generic bpf_map_update_value map_update_elem __sys_bpf Check the CPU ID against nr_cpu_ids and cpu_possible() instead. This rejects CPU IDs outside the valid range and CPUs absent from the possible mask, while allowing valid sparse CPU IDs. | ||||
| CVE-2026-2604 | 2 Gnome, Redhat | 2 Evolution-data-server, Enterprise Linux | 2026-09-25 | 5.6 Medium |
| A flaw was found in evolution-data-server. Inconsistent comparison logic in the addressbook file backend allows a Flatpak application with D-Bus access to craft a malicious URI containing directory traversal sequences. This URI is stored without proper validation during contact creation or modification. Later, during contact deletion, the URI is processed with a less strict check, leading to the deletion of arbitrary files on the host filesystem. This could potentially include critical Flatpak override files. | ||||
| CVE-2026-97538 | 1 Linux | 1 Linux Kernel | 2026-09-25 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: hwmon: (asus_rog_ryujin) Validate HID report lengths rog_ryujin_raw_event() parses response headers and payload fields without first checking that they are present in the received report. A short report can therefore make the driver consume uninitialized bytes from the HID transport buffer and expose them as sensor values through sysfs. Validate the response header and the fields used by each response type before parsing them. | ||||
| CVE-2026-97902 | 1 Linux | 1 Linux Kernel | 2026-09-25 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: fs: don't return -EINVAL for successful nested thaw Commit 7366f8b6fc6a ("fs: handle freezing from multiple devices") replaced the freeze_holders bitmask with per-holder counters to allow nested freezes. In the bitmask version, a thaw that released a shared hold while another holder remained returned 0. Since the rework, thaw_super_locked() drops the freeze reference via freeze_dec() but then returns -EINVAL when other freezers remain, misinforming the caller: the thaw did succeed, the superblock just stays frozen for the remaining holders. This breaks bdev-initiated freezing. When a filesystem is frozen with FIFREEZE and additionally frozen via bdev_freeze() -- which nests by design, see fs_bdev_freeze() -- the subsequent bdev_thaw() receives -EINVAL from the holder op although its freeze reference was dropped, and therefore keeps bd_fsfreeze_count elevated. Then device-mapper's unlock_fs() ignores bdev_thaw()'s return value, so nothing rebalances the count. After the user's FITHAW and umount, the block device can never be mounted again: dm-1: Can't mount, blockdev is frozen There is no way for userspace to drop the leaked count; only destroying the block device (or a reboot) recovers the device. Reproducer (any kernel since v6.8): dmsetup create dut --table "0 $(blockdev --getsz "$DEV") linear $DEV 0" mkfs.ext4 /dev/mapper/dut mount /dev/mapper/dut /mnt fsfreeze --freeze /mnt # freeze_ucount == 1 dmsetup suspend dut # bd_fsfreeze_count == 1, ucount == 2 dmsetup resume dut # ucount 2 -> 1, but thaw_super() # returns -EINVAL, so bdev_thaw() # keeps bd_fsfreeze_count at 1 fsfreeze --unfreeze /mnt # filesystem thaws fine umount /mnt mount /dev/mapper/dut /mnt # EBUSY, forever The same happens with fsfreeze held across an LVM snapshot of the origin volume. fs_bdev_thaw()'s documentation already describes the intended semantics: "If this function returns zero it doesn't mean that the filesystem is unfrozen as it may have been frozen multiple times". Restore them by returning 0 when a nested thaw drops its hold while other freezers remain. Thawing without holding a freeze still fails with -EINVAL as may_unfreeze() rejects that case before the reference count is touched. | ||||
| CVE-2026-97953 | 1 Linux | 1 Linux Kernel | 2026-09-25 | 7 High |
| In the Linux kernel, the following vulnerability has been resolved: net: stmmac: fix TX descriptor availability check for TSO traffic stmmac_tso_xmit() estimates the number of free TX descriptors required by a TSO skb as: (skb->len - proto_hdr_len) / TSO_MAX_BUFF_SIZE + 1 which assumes the payload is split into TSO_MAX_BUFF_SIZE chunks. This underestimates the descriptors actually consumed by stmmac_tso_allocator(), since each fragment is mapped individually and so it needs at least one descriptor regardless of its size. Moreover, one descriptor is used for the L2/L3/L4 headers and, when the MSS changes, one more is consumed for the MSS context descriptor. For a highly fragmented TSO skb the check can therefore pass even when the ring has too few free slots. stmmac_tso_allocator() then writes past the available descriptors, overwriting descriptors still owned by the DMA engine, corrupting the TX ring. Add stmmac_tso_get_num_desc() to compute the exact number of descriptors needed for the header, the linear payload and each fragment, plus the MSS context descriptor when required, and use it in the availability check. | ||||
| CVE-2026-97956 | 1 Linux | 1 Linux Kernel | 2026-09-25 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: net_failover: Fix the deadlock in net_failover_slave_name_change() This is a sibling fix of commit b84c5632c7b3 ("net: net_failover: Fix the deadlock in slave register"). There is netdev_lock_ops() in the upper callers, so using netif_open() instead of dev_open(). Call Trace: __schedule+0x2bb/0x650 schedule+0x27/0xb0 schedule_preempt_disabled+0x15/0x30 __mutex_lock.constprop.0+0x550/0xaf0 __mutex_lock_slowpath+0x13/0x20 mutex_lock+0x3b/0x50 dev_open+0x3b/0xe0 net_failover_slave_name_change+0x22/0x40 failover_event+0xd4/0x1e0 notifier_call_chain+0x62/0xf0 raw_notifier_call_chain+0x16/0x30 call_netdevice_notifiers_info+0x50/0x80 netif_change_name+0x200/0x330 do_setlink.isra.0+0xb12/0xdf0 ? security_capable+0x9a/0x1e0 ? ns_capable+0x31/0x60 rtnl_setlink+0x302/0x670 ? netlink_recvmsg+0x296/0x340 ? security_capable+0x9a/0x1e0 ? __pfx_rtnl_setlink+0x10/0x10 rtnetlink_rcv_msg+0x384/0x460 ? __pfx_rtnetlink_rcv_msg+0x10/0x10 netlink_rcv_skb+0x61/0x120 rtnetlink_rcv+0x15/0x30 netlink_unicast+0x28f/0x3c0 netlink_sendmsg+0x216/0x450 __sys_sendto+0x222/0x230 __x64_sys_sendto+0x24/0x40 x64_sys_call+0x1d5d/0x2390 do_syscall_64+0x105/0x5a0 ? do_syscall_64+0x140/0x5a0 ? exc_page_fault+0x94/0x1e0 entry_SYSCALL_64_after_hwframe+0x76/0x7e | ||||
| CVE-2026-97960 | 1 Linux | 1 Linux Kernel | 2026-09-25 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: perf/x86/intel: Prevent drain_pebs() reentry The PEBS buffer is shared by all events on a CPU, so drain_pebs() must not be reentered. If so, one instance may observe stale buffer state and potentially access out-of-bound memory. Most invocations happen in NMI context, which naturally prevents reentry. However, drain_pebs() is also reachable from process context via intel_pmu_drain_pebs_buffer(). In those paths, the PMU is often already disabled, but not guaranteed. For example, __intel_pmu_pebs_disable() only disables the target counter, so other active counters can still raise a PMI and interrupt an in-flight drain_pebs(). Here is an example, __perf_addr_filters_adjust() perf_event_stop() __perf_event_stop() x86_pmu_stop() (event->pmu->stop) intel_pmu_disable_event() intel_pmu_pebs_disable() __intel_pmu_pebs_disable() intel_pmu_drain_large_pebs() intel_pmu_drain_pebs_buffer() Introduce __intel_pmu_quiesce() and __intel_pmu_resume() helpers and use them in intel_pmu_drain_large_pebs() to disable the full PMU around the intel_pmu_drain_pebs_buffer() call, preventing reentry. Also add a warning in intel_pmu_drain_pebs_buffer() when the full PMU is not disabled. | ||||
| CVE-2026-97975 | 1 Linux | 1 Linux Kernel | 2026-09-25 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_sysfs: Fix NULL pointer dereference in device_del() A NULL pointer dereference in klist_put() occurs when a child device (such as a BNEP network device in bnep_session) is concurrently being unregistered while hci_conn_del_sysfs() reparents child devices. This is caused by a race condition between hci_conn_del_sysfs() and concurrent child device unregistration (e.g. bnep_session calling unregister_netdev()). During device unregistration, device_del() snapshots a non-NULL parent pointer. Concurrently, hci_conn_del_sysfs() finds the child device using device_find_any_child() and calls device_move() to reparent it to NULL, which removes the node from its parent's klist and clears knode_parent. Subsequently, device_del() calls klist_del(&dev->p->knode_parent) using the stale parent snapshot, causing klist_put() to dereference knode_klist(n)->put on an already removed node, resulting in a NULL pointer dereference. This race was introduced by commit 27aabf27fd01 ("Bluetooth: fix use-after-free in device_for_each_child()"), which replaced device_find_child(..., __match_tty) with device_find_any_child() in hci_conn_del_sysfs(). That change was intended to avoid a use-after-free where conn->dev outlived its parent hdev->dev when child devices held references to conn->dev, because conn->dev only held a reference to hdev->dev while registered in sysfs. Fix the issue properly by taking an explicit reference to the parent device with get_device(&hdev->dev) in hci_conn_init_sysfs() and dropping it with put_device(parent) in bt_link_release() when the conn device is freed. This ensures that hdev->dev remains valid for the entire lifecycle of conn->dev, resolving the underlying use-after-free. With the parent reference held properly, restore the __match_tty filter in hci_conn_del_sysfs() so that device_move() is only invoked on persistent RFCOMM TTY devices as originally intended, eliminating the race condition with unregistering network devices. | ||||
| CVE-2026-88264 | 2 Containers, Redhat | 5 Crun, Enterprise Linux, Hardened Images and 2 more | 2026-09-25 | 5.6 Medium |
| A flaw was found in crun. When the container configuration does not give /dev a dedicated mount, terminal setup can redirect /dev/console onto an attacker-controlled path, including via the read-only-rootfs bind-mount fallback. Affected versions are crun 1.29.1 and earlier. Default configurations that mount a fresh /dev are not exposed. No fixed release is available yet. | ||||
| CVE-2026-88839 | 2 Busybox, Redhat | 3 Busybox, Hardened Images, Hummingbird | 2026-09-25 | 6.7 Medium |
| BusyBox passwd/group tokenize() references a stale endpoint pointer after trimming, causing an out-of-bounds write of heap pointers. | ||||
| CVE-2026-88835 | 2 Busybox, Redhat | 3 Busybox, Hardened Images, Hummingbird | 2026-09-25 | 6.1 Medium |
| BusyBox dpkg read_package_field() steps past a NUL terminator on malformed .deb packages, causing an out-of-bounds heap read. | ||||
| CVE-2026-88837 | 2 Busybox, Redhat | 3 Busybox, Hardened Images, Hummingbird | 2026-09-25 | 6.5 Medium |
| BusyBox httpd treats yescrypt ($y$) password hashes as plaintext during Basic Authentication, inverting the authentication check. | ||||
| CVE-2026-88831 | 2 Busybox, Redhat | 3 Busybox, Hardened Images, Hummingbird | 2026-09-25 | 5.3 Medium |
| BusyBox httpd IP deny rules with invalid CIDR prefix lengths fail open, leaving a parsed IP with a zeroed mask so the rule matches no clients. | ||||
| CVE-2026-97589 | 1 Linux | 1 Linux Kernel | 2026-09-25 | 7 High |
| In the Linux kernel, the following vulnerability has been resolved: s390/crypto: Fix wrong return code to engine in asynch callbacks When crypto_finalize_hash_request() or crypto_finalize_skcipher_request() explicitly completes a request, the do_one_request callback must return 0 to indicate successful handling. Returning a negative error code causes the crypto engine to assume the driver failed to take ownership and triggers a second completion via crypto_request_complete(), resulting in a double completion. This pattern occurs in paes_s390.c 4 times and once in phmac_s390.c. Fixed in phmac_do_one_request() and all four paes do_one_request callbacks (ecb, cbc, ctr, xts) by returning 0 after explicit finalization instead of propagating the error code. | ||||
| CVE-2026-97915 | 1 Linux | 1 Linux Kernel | 2026-09-25 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: accel/ivpu: Limit firmware log name prints to field size The name in struct vpu_tracing_buffer_header is a fixed-size array populated by the NPU firmware. It is expected to be NUL-terminated, but nothing on the host side enforces this, so printing it with an unbounded string conversion would read past the field if the terminator is ever missing and expose adjacent bytes of the shared tracing BO through dmesg and the debugfs FW log output. Print at most as many characters as the name field holds, so the output never runs past it even if the string is not NUL-terminated. | ||||
| CVE-2026-88832 | 2 Busybox, Redhat | 3 Busybox, Hardened Images, Hummingbird | 2026-09-25 | 7.3 High |
| BusyBox romfs volume ID parsing uses unbounded strlen on attacker-controlled metadata, causing a heap buffer overflow when processing crafted filesystem images. | ||||
| CVE-2026-97916 | 1 Linux | 1 Linux Kernel | 2026-09-25 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: accel/ivpu: Validate firmware log buffer metadata The tracing log headers parsed by fw_log_print_buffer() reside in DMA-shared BOs that the NPU firmware can write to. fw_log_from_bo() validated log->header_size and log->size, but fw_log_print_buffer() re-read those same fields from shared memory afterwards, allowing a TOCTOU where firmware changes them between the check and the use, and making the host dereference out-of-bounds addresses while printing logs. Snapshot the validated values once with READ_ONCE() and pass them down explicitly in a new struct ivpu_fw_log_desc instead of re-reading them from the shared struct. | ||||
| CVE-2026-97942 | 1 Linux | 1 Linux Kernel | 2026-09-25 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: x86/alternatives: Exclude text poking against change_page_attr() From time to time, the following BUG can be observed in the x86 alternatives patching code [0]: > kernel BUG at arch/x86/kernel/alternative.c:2576! > Oops: invalid opcode: 0000 [#1] SMP NOPTI > CPU: 0 UID: 0 PID: 355 Comm: (udev-worker) Not tainted 7.1.3-1-default #1 PREEMPT(full) openSUSE Tumbleweed 8c1795b03ec64f997e57a8ad38b1161e3b98da64 > Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS unknown 02/02/2022 > RIP: 0010:__text_poke+0x2aa/0x450 > Call Trace: > <TASK> > smp_text_poke_batch_finish+0x2a7/0x320 > __static_call_transform+0xb7/0x220 > arch_static_call_transform+0x5b/0xb0 > __static_call_init+0xe9/0x270 > static_call_module_notify+0x11f/0x150 > notifier_call_chain+0x61/0xe0 > blocking_notifier_call_chain_robust+0x63/0xc0 > load_module+0x1c92/0x20c0 > init_module_from_file+0xd8/0x140 > idempotent_init_module+0x100/0x2f0 > __x64_sys_finit_module+0x71/0xe0 > do_syscall_64+0xe1/0x610 > entry_SYSCALL_64_after_hwframe+0x76/0x7e which matches the following BUG_ON() in alternative.c: /* * If something went wrong, crash and burn since recovery paths are not * implemented. */ BUG_ON(!pages[0] || (cross_page_boundary && !pages[1])); This can happen if vmalloc_to_page() fails, for any reason. Such can happen if text poking races with CPA, which can possibly result in the collapsing of page tables (or breaking of PMD hugepages). It is not a problem for most users of vmalloc_to_page() (they solely own the vmalloc'd range) but, when CONFIG_ARCH_HAS_EXECMEM_ROX=y, various modules own a single execmem vmalloc range, and can call set_memory_*() in parallel on it. This can happen to race against __text_poke and cause havoc in vmalloc_to_page(). Fix it by excluding against CPA using the init_mm mmap read lock. [ dhansen: Fix up SoB ordering. The actual code flow here was: Pedro=>Lorenzo=>Mike=>Me which is reflected in the SoB chain now. I *believe* Mike simply picked up Lorenzo's update to Pedro's post from the Link ] | ||||
| CVE-2026-97908 | 1 Linux | 1 Linux Kernel | 2026-09-25 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btqcomsmd: destroy RPMsg endpoints before freeing hci_dev The command and ACL RPMsg endpoints store struct btqcomsmd as their callback private data. The receive callbacks dereference btq->hdev without taking an hci_dev reference. The current teardown order frees the hci_dev before destroying the RPMsg endpoints in both the hci_register_dev() error path and the driver remove path. If WCNSS delivers data in that window, the endpoint callback can run with an already freed hci_dev and pass it to the Bluetooth core. For qcom_smd endpoints, rpmsg_destroy_ept() closes the channel and clears the callback under the channel recv_lock. The receive path holds the same lock while invoking the callback, so destroying the endpoints first both prevents new callbacks and serializes with any callback already running. Destroy the command and ACL endpoints before hci_free_dev(). Keep hci_unregister_dev() first during remove so the HCI core stops issuing operations before the transport endpoints are shut down. In the full registration-error cleanup path, return directly after freeing the hci_dev to avoid falling through to the partial-construction labels and destroying the endpoints twice. | ||||
| CVE-2026-97917 | 1 Linux | 1 Linux Kernel | 2026-09-25 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: accel/ivpu: Validate full buffer range in ivpu_to_cpu_addr Add a size parameter to ivpu_to_cpu_addr() and validate that the whole [vpu_addr, vpu_addr + size) range stays within the BO. | ||||