Export limit exceeded: 17174 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (17174 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-34988 | 1 Bytecodealliance | 1 Wasmtime | 2026-04-15 | 6.3 Medium |
| Wasmtime is a runtime for WebAssembly. From 28.0.0 to before 36.0.7, 42.0.2, and 43.0.1, Wasmtime's implementation of its pooling allocator contains a bug where in certain configurations the contents of linear memory can be leaked from one instance to the next. The implementation of resetting the virtual memory permissions for linear memory used the wrong predicate to determine if resetting was necessary, where the compilation process used a different predicate. This divergence meant that the pooling allocator incorrectly deduced at runtime that resetting virtual memory permissions was not necessary while compile-time determine that virtual memory could be relied upon. The pooling allocator must be in use, Config::memory_guard_size configuration option must be 0, Config::memory_reservation configuration must be less than 4GiB, and pooling allocator must be configured with max_memory_size the same as the memory_reservation value in order to exploit this vulnerability. If all of these conditions are applicable then when a linear memory is reused the VM permissions of the previous iteration are not reset. This means that the compiled code, which is assuming out-of-bounds loads will segfault, will not actually segfault and can read the previous contents of linear memory if it was previously mapped. This represents a data leakage vulnerability between guest WebAssembly instances which breaks WebAssembly's semantics and additionally breaks the sandbox that Wasmtime provides. Wasmtime is not vulnerable to this issue with its default settings, nor with the default settings of the pooling allocator, but embeddings are still allowed to configure these values to cause this vulnerability. This vulnerability is fixed in 36.0.7, 42.0.2, and 43.0.1. | ||||
| CVE-2024-36319 | 1 Amd | 14 Instinct Mi300a, Instinct Mi300x, Instinct Mi308x and 11 more | 2026-04-15 | N/A |
| Debug code left active in AMD's Video Decoder Engine Firmware (VCN FW) could allow a attacker to submit a maliciously crafted command causing the VCN FW to perform read/writes HW registers, potentially impacting confidentiality, integrity and availabilability of the system. | ||||
| CVE-2025-31930 | 2026-04-15 | 8.8 High | ||
| A vulnerability has been identified in IEC 1Ph 7.4kW Child socket (8EM1310-2EH04-0GA0) (All versions < V2.135), IEC 1Ph 7.4kW Child socket/ shutter (8EM1310-2EN04-0GA0) (All versions < V2.135), IEC 1Ph 7.4kW Parent cable 7m (8EM1310-2EJ04-3GA1) (All versions < V2.135), IEC 1Ph 7.4kW Parent cable 7m incl. SIM (8EM1310-2EJ04-3GA2) (All versions < V2.135), IEC 1Ph 7.4kW Parent socket (8EM1310-2EH04-3GA1) (All versions < V2.135), IEC 1Ph 7.4kW Parent socket incl. SIM (8EM1310-2EH04-3GA2) (All versions < V2.135), IEC 1Ph 7.4kW Parent socket/ shutter (8EM1310-2EN04-3GA1) (All versions < V2.135), IEC 1Ph 7.4kW Parent socket/ shutter SIM (8EM1310-2EN04-3GA2) (All versions < V2.135), IEC 3Ph 22kW Child cable 7m (8EM1310-3EJ04-0GA0) (All versions < V2.135), IEC 3Ph 22kW Child socket (8EM1310-3EH04-0GA0) (All versions < V2.135), IEC 3Ph 22kW Child socket/ shutter (8EM1310-3EN04-0GA0) (All versions < V2.135), IEC 3Ph 22kW Parent cable 7m (8EM1310-3EJ04-3GA1) (All versions < V2.135), IEC 3Ph 22kW Parent cable 7m incl. SIM (8EM1310-3EJ04-3GA2) (All versions < V2.135), IEC 3Ph 22kW Parent socket (8EM1310-3EH04-3GA1) (All versions < V2.135), IEC 3Ph 22kW Parent socket incl. SIM (8EM1310-3EH04-3GA2) (All versions < V2.135), IEC 3Ph 22kW Parent socket/ shutter (8EM1310-3EN04-3GA1) (All versions < V2.135), IEC 3Ph 22kW Parent socket/ shutter SIM (8EM1310-3EN04-3GA2) (All versions < V2.135), IEC ERK 3Ph 22 kW Child cable 7m (8EM1310-3FJ04-0GA0) (All versions < V2.135), IEC ERK 3Ph 22 kW Child cable 7m (8EM1310-3FJ04-0GA1) (All versions < V2.135), IEC ERK 3Ph 22 kW Child cable 7m (8EM1310-3FJ04-0GA2) (All versions < V2.135), IEC ERK 3Ph 22 kW Child socket (8EM1310-3FH04-0GA0) (All versions < V2.135), IEC ERK 3Ph 22 kW Parent socket (8EM1310-3FH04-3GA1) (All versions < V2.135), IEC ERK 3Ph 22 kW Parent socket incl. SI (8EM1310-3FH04-3GA2) (All versions < V2.135), UL Commercial Cellular 48A NTEP (8EM1310-5HF14-1GA2) (All versions < V2.135), UL Commercial Child 40A w/ 15118 HW (8EM1310-4CF14-0GA0) (All versions < V2.135), UL Commercial Child 48A BA Compliant (8EM1315-5CG14-0GA0) (All versions < V2.135), UL Commercial Child 48A w/ 15118 HW (8EM1310-5CF14-0GA0) (All versions < V2.135), UL Commercial Parent 40A with Simcard (8EM1310-4CF14-1GA2) (All versions < V2.135), UL Commercial Parent 48A (USPS) (8EM1317-5CG14-1GA2) (All versions < V2.135), UL Commercial Parent 48A BA Compliant (8EM1315-5CG14-1GA2) (All versions < V2.135), UL Commercial Parent 48A with Simcard BA (8EM1310-5CF14-1GA2) (All versions < V2.135), UL Commercial Parent 48A, 15118, 25ft (8EM1310-5CG14-1GA1) (All versions < V2.135), UL Commercial Parent 48A, 15118, 25ft (8EM1314-5CG14-2FA2) (All versions < V2.135), UL Commercial Parent 48A, 15118, 25ft (8EM1315-5HG14-1GA2) (All versions < V2.135), UL Commercial Parent 48A,15118 25ft Sim (8EM1310-5CG14-1GA2) (All versions < V2.135), VersiCharge Blue™ 80A AC Cellular (8EM1315-7BG16-1FH2) (All versions < V2.135). Affected devices contain Modbus service enabled by default. This could allow an attacker connected to the same network to remotely control the EV charger. | ||||
| CVE-2025-3854 | 2026-04-15 | 8 High | ||
| A vulnerability, which was classified as critical, was found in H3C GR-3000AX up to V100R006. Affected is the function EnableIpv6/UpdateWanModeMulti/UpdateIpv6Params/EditWlanMacList/Edit_List_SSID of the file /goform/aspForm of the component HTTP POST Request Handler. The manipulation of the argument param leads to buffer overflow. The attack needs to be initiated within the local network. The exploit has been disclosed to the public and may be used. It is recommended to upgrade the affected component. Other functions might be affected as well. | ||||
| CVE-2025-59097 | 1 Dormakaba | 1 Access Manager | 2026-04-15 | N/A |
| The exos 9300 application can be used to configure Access Managers (e.g. 92xx, 9230 and 9290). The configuration is done in a graphical user interface on the dormakaba exos server. As soon as the save button is clicked in exos 9300, the whole configuration is sent to the selected Access Manager via SOAP. The SOAP request is sent without any prior authentication or authorization by default. Though authentication and authorization can be configured using IPsec for 92xx-K5 devices and mTLS for 92xx-K7 devices, it is not enabled by default and must therefore be activated with additional steps. This insecure default allows an attacker with network level access to completely control the whole environment. An attacker is for example easily able to conduct the following tasks without prior authentication: - Re-configure Access Managers (e.g. remove alarming system requirements) - Freely re-configure the inputs and outputs - Open all connected doors permanently - Open all doors for a defined time interval - Change the admin password - and many more Network level access can be gained due to an insufficient network segmentation as well as missing LAN firewalls. Devices with an insecure configuration have been identified to be directly exposed to the internet. | ||||
| CVE-2025-55286 | 2026-04-15 | N/A | ||
| z2d is a pure Zig 2D graphics library. z2d v0.7.0 released with a new multi-sample anti-aliasing (MSAA) method, which uses a new buffering mechanism for storing coverage data. This differs from the standard alpha mask surface used for the previous super-sample anti-aliasing (SSAA) method. Under certain circumstances where the path being drawn existed in whole or partly outside of the rendering surface, incorrect bounding could cause out-of-bounds access within the coverage buffer. This affects the higher-level drawing operations, such as Context.fill, Context.stroke, painter.fill, and painter.stroke, when either the .default or .multisample_4x anti-aliasing modes were used. .supersample_4x was not affected, nor was drawing without anti-aliasing. In non-safe optimization modes (consumers compiling with ReleaseFast or ReleaseSmall), this could potentially lead to invalid memory accesses or corruption. z2d v0.7.1 fixes this issue, and it's recommended to upgrade to v0.7.1, or, given the small period of time v0.7.0 has been released, use v0.7.1 immediately, skipping v0.7.0. | ||||
| CVE-2023-49141 | 1 Intel | 1 Processors Stream Cache Mechanism | 2026-04-15 | 7.8 High |
| Improper isolation in some Intel(R) Processors stream cache mechanism may allow an authenticated user to potentially enable escalation of privilege via local access. | ||||
| CVE-2025-3145 | 1 Mindspore | 1 Mindspore | 2026-04-15 | 3.3 Low |
| A vulnerability, which was classified as problematic, has been found in MindSpore 2.5.0. Affected by this issue is the function mindspore.numpy.fft.rfft2. The manipulation leads to memory corruption. The attack needs to be approached locally. The exploit has been disclosed to the public and may be used. | ||||
| CVE-2025-11010 | 1 Vstakhov | 1 Libucl | 2026-04-15 | 5.3 Medium |
| A vulnerability has been found in vstakhov libucl up to 0.9.2. Affected by this vulnerability is the function ucl_include_common of the file /src/ucl_util.c. Such manipulation leads to heap-based buffer overflow. Local access is required to approach this attack. The exploit has been disclosed to the public and may be used. | ||||
| CVE-2025-41234 | 1 Vmware | 1 Spring Framework | 2026-04-15 | 6.5 Medium |
| Description In Spring Framework, versions 6.0.x as of 6.0.5, versions 6.1.x and 6.2.x, an application is vulnerable to a reflected file download (RFD) attack when it sets a “Content-Disposition” header with a non-ASCII charset, where the filename attribute is derived from user-supplied input. Specifically, an application is vulnerable when all the following are true: * The header is prepared with org.springframework.http.ContentDisposition. * The filename is set via ContentDisposition.Builder#filename(String, Charset). * The value for the filename is derived from user-supplied input. * The application does not sanitize the user-supplied input. * The downloaded content of the response is injected with malicious commands by the attacker (see RFD paper reference for details). An application is not vulnerable if any of the following is true: * The application does not set a “Content-Disposition” response header. * The header is not prepared with org.springframework.http.ContentDisposition. * The filename is set via one of: * ContentDisposition.Builder#filename(String), or * ContentDisposition.Builder#filename(String, ASCII) * The filename is not derived from user-supplied input. * The filename is derived from user-supplied input but sanitized by the application. * The attacker cannot inject malicious content in the downloaded content of the response. Affected Spring Products and VersionsSpring Framework: * 6.2.0 - 6.2.7 * 6.1.0 - 6.1.20 * 6.0.5 - 6.0.28 * Older, unsupported versions are not affected MitigationUsers of affected versions should upgrade to the corresponding fixed version. Affected version(s)Fix versionAvailability6.2.x6.2.8OSS6.1.x6.1.21OSS6.0.x6.0.29 Commercial https://enterprise.spring.io/ No further mitigation steps are necessary. CWE-113 in `Content-Disposition` handling in VMware Spring Framework versions 6.0.5 to 6.2.7 allows remote attackers to launch Reflected File Download (RFD) attacks via unsanitized user input in `ContentDisposition.Builder#filename(String, Charset)` with non-ASCII charsets. | ||||
| CVE-2024-45687 | 2026-04-15 | N/A | ||
| Improper Neutralization of CRLF Sequences in HTTP Headers ('HTTP Request/Response Splitting') vulnerability in Payara Platform Payara Server (Grizzly, REST Management Interface modules), Payara Platform Payara Micro (Grizzly modules) allows Manipulating State, Identity Spoofing.This issue affects Payara Server: from 4.1.151 through 4.1.2.191.51, from 5.20.0 through 5.70.0, from 5.2020.2 through 5.2022.5, from 6.2022.1 through 6.2024.12, from 6.0.0 through 6.21.0; Payara Micro: from 4.1.152 through 4.1.2.191.51, from 5.20.0 through 5.70.0, from 5.2020.2 through 5.2022.5, from 6.2022.1 through 6.2024.12, from 6.0.0 through 6.21.0. | ||||
| CVE-2025-5640 | 2026-04-15 | 3.3 Low | ||
| A vulnerability was found in PX4-Autopilot 1.12.3. It has been classified as problematic. This affects the function MavlinkReceiver::handle_message_trajectory_representation_waypoints of the file mavlink_receiver.cpp of the component TRAJECTORY_REPRESENTATION_WAYPOINTS Message Handler. The manipulation leads to stack-based buffer overflow. Local access is required to approach this attack. The exploit has been disclosed to the public and may be used. | ||||
| CVE-2025-52264 | 1 Starcharge | 1 Artemis | 2026-04-15 | 8 High |
| StarCharge Artemis AC Charger 7-22 kW v1.0.4 was discovered to contain a stack overflow via the cgiMain function at download.cgi. | ||||
| CVE-2025-47153 | 1 Nodejs | 1 Nodejs | 2026-04-15 | 6.5 Medium |
| Certain build processes for libuv and Node.js for 32-bit systems, such as for the nodejs binary package through nodejs_20.19.0+dfsg-2_i386.deb for Debian GNU/Linux, have an inconsistent off_t size (e.g., building on i386 Debian always uses _FILE_OFFSET_BITS=64 for the libuv dynamic library, but uses the _FILE_OFFSET_BITS global system default of 32 for nodejs), leading to out-of-bounds access. NOTE: this is not a problem in the Node.js software itself. In particular, the Node.js website's download page does not offer prebuilt Node.js for Linux on i386. | ||||
| CVE-2025-5555 | 1 Dieboldnixdorf | 1 Wincor | 2026-04-15 | 7.8 High |
| A vulnerability has been found in Nixdorf Wincor PORT IO Driver up to 1.0.0.1. This affects the function sub_11100 in the library wnport.sys of the component IOCTL Handler. Such manipulation leads to stack-based buffer overflow. Local access is required to approach this attack. The exploit has been disclosed to the public and may be used. Upgrading to version 3.0.0.1 is able to mitigate this issue. Upgrading the affected component is recommended. The vendor was contacted beforehand and was able to provide a patch very early. | ||||
| CVE-2025-5408 | 2026-04-15 | 9.8 Critical | ||
| A vulnerability was found in WAVLINK QUANTUM D2G, QUANTUM D3G, WL-WN530G3A, WL-WN530HG3, WL-WN532A3 and WL-WN576K1 up to V1410_240222 and classified as critical. Affected by this issue is the function sys_login of the file /cgi-bin/login.cgi of the component HTTP POST Request Handler. The manipulation of the argument login_page leads to buffer overflow. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. | ||||
| CVE-2025-55903 | 2026-04-15 | 8.3 High | ||
| A HTML injection vulnerability exists in Perfex CRM v3.3.1. The application fails to sanitize user input in the "Bill To" address field within the estimate module. As a result, arbitrary HTML can be injected and rendered unescaped in client-facing documents. | ||||
| CVE-2023-28383 | 2026-04-15 | 6.1 Medium | ||
| Improper conditions check in some Intel(R) BIOS PPAM firmware may allow a privileged user to potentially enable escalation of privilege via local access. | ||||
| CVE-2025-34096 | 1 Efssoft | 1 Easy File Sharing Web Server | 2026-04-15 | N/A |
| A stack-based buffer overflow vulnerability exists in Easy File Sharing HTTP Server version 7.2. The flaw is triggered when a crafted POST request is sent to the /sendemail.ghp endpoint containing an overly long Email parameter. The application fails to properly validate the length of this field, resulting in a memory corruption condition. An unauthenticated remote attacker can exploit this to execute arbitrary code with the privileges of the server process. | ||||
| CVE-2025-62877 | 1 Suse | 1 Harvester | 2026-04-15 | 9.8 Critical |
| Projects using the SUSE Virtualization (Harvester) environment may expose the OS default ssh login password if they are using the 1.5.x or 1.6.x interactive installer to either create a new cluster or add new hosts to an existing cluster. The environment is not affected if the PXE boot mechanism is utilized along with the Harvester configuration setup. | ||||