| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| undici bundles a WebSocket client whose permessage-deflate size-limit cleanup removes all listeners from the internal zlib inflate stream, including its error listener, while that stream can still emit. When a remote peer sends a compressed payload that crosses the built-in 128 MiB decompressed-payload limit and then contains a malformed DEFLATE byte, the inflate stream emits a data error with no listener attached, which Node.js treats as a fatal unhandled error and terminates the entire process. Exploitation is remote and unauthenticated, requires no application mistake, and is asymmetric, since roughly 130 KB on the wire expands past the limit and crashes the process, and reconnecting can repeat the crash. This affects undici versions from 6.25.0 up to 6.28.1, from 7.28.0 up to 7.29.1, and from 8.1.0 up to 8.10.2. Users should upgrade to undici 6.28.1, 7.29.1, or 8.10.2. |
| undici 8.10.0 omits the destination origin from the cache and request-deduplication keys when the cache or deduplicate interceptor is composed directly onto a Client or Pool. Because the internal cache key falls back to an empty origin string, a cacheable or in-flight response from one upstream origin is returned for a request to a different, trusted origin whenever the method, path, and relevant headers match, which permits cross-origin information disclosure and persistent cache poisoning. The reporter demonstrated a full authentication bypass in which a JWT signed with an attacker-controlled key was accepted as belonging to a trusted issuer, and the trusted origin was never contacted. This is a regression introduced in 8.10.0 and affects undici versions from 8.10.0 up to 8.10.2. Applications using an Agent, which carries the origin in its dispatch options, are not affected. Users should upgrade to undici 8.10.2. |
| undici's retry handler can leave an already-exposed response body pending forever. When a server returns a successful response that declares a Content-Length, sends only part of the body, and closes the connection, the retry handler retries the request. If the retry returns a non-retryable status such as 400, the handler forwards that new response downstream and replaces its internal response stream, but the original response body that the application still holds is never ended or destroyed. As a result calls that read that body never settle, and the configured body timeout does not fire because its timer is tied to the connection parser rather than the orphaned body. An attacker-controlled server can trigger this with two short responses without keeping a connection open, and repeated requests accumulate pending promises and streams that can exhaust application concurrency or memory. This affects undici versions from 7.11.0 up to 7.29.1 and from 8.0.0 up to 8.10.2. Users should upgrade to undici 7.29.1 or 8.10.2. |
| undici's retry interceptor can append the body of a ranged retry response to bytes already delivered from an earlier partial response while still presenting the original response's status and headers. This happens when an upstream server delivers part of a body without a trustworthy resume checkpoint, for example a non-success response whose headers were already sent or a partial-content response with an unusable content range, then closes the connection and answers the resumed range request with more bytes. As a result the response body can be longer than the Content-Length that the application observes. An application that relays such a response to a downstream HTTP/1.1 peer without normalizing the framing can emit a body that exceeds the forwarded Content-Length, and the excess bytes can be interpreted as the start of a following response, which enables downstream response splitting or desynchronization. Exploitation requires an attacker-controlled upstream server and an application that forwards the response through a framing-sensitive path. This affects undici versions before 6.28.1, from 7.0.0 up to 7.29.1, and from 8.0.0 up to 8.10.2. Users should upgrade to undici 6.28.1, 7.29.1, or 8.10.2. |
| undici's WebSocket client crashes the whole Node.js process during the opening handshake when a server responds with a subprotocol that the client never requested. A default WebSocket connection sends no subprotocol, but if the server's 101 response includes a Sec-WebSocket-Protocol header, undici dereferences a null value while checking it against the requested list and throws an uncaught TypeError. Because that code runs inside a microtask with no surrounding error handling, the exception propagates and terminates the process under Node's default behavior, instead of gracefully failing the connection as required by the WebSocket protocol. Any application that opens a WebSocket to an attacker-controlled or compromised server, or over a plaintext connection subject to a machine-in-the-middle, can be crashed remotely without authentication in the default configuration. This affects undici versions from 6.7.0 up to 6.28.1, from 7.0.0 up to 7.29.1, and from 8.0.0 up to 8.10.2. Users should upgrade to undici 6.28.1, 7.29.1, or 8.10.2. |
| undici's cache interceptor does not handle the Set-Cookie response header anywhere in its cache path, so it neither refuses to store nor strips that header. In shared cache mode, which is the default, an otherwise cacheable response that carries a Set-Cookie header, for example one marked with a public and max-age directive, is stored and then re-served to a later caller that matches the same cache key. As a result one caller's cookie is disclosed to a different caller, and an untrusted server can inject cookies into cached responses served to all subsequent callers. This violates the requirement that a shared cache must not store cookies. This affects undici versions from 7.0.0 up to 7.29.1 and from 8.0.0 up to 8.10.2. Users should upgrade to undici 7.29.1 or 8.10.2. |
| undici's dump interceptor reads and discards a response body up to a configurable maximum size. When a response declares a Content-Length that exceeds the maximum, the interceptor aborts cleanly, but when a response has no Content-Length and is chunked, the interceptor instead signals completion early once the accumulated size reaches the maximum, without pausing or aborting the request. Because the underlying parser keeps delivering body bytes, a second completion signal fires and trips an internal assertion, which aborts the request and tears down the connection. The application is left observing a misleading successful status with an empty or truncated body while the connection has actually been disconnected. This affects undici versions from 7.1.0 up to 7.29.1 and from 8.0.0 up to 8.10.2. Users should upgrade to undici 7.29.1 or 8.10.2. |
| undici's BalancedPool constructor passes its entire options object through an internal deep-clone that serializes and reparses the value as JSON. Because JSON cannot represent functions, any function-valued TLS option, such as a caller-supplied checkServerIdentity callback or a custom connector inside the connect option, is silently discarded before it reaches the TLS layer. As a result a peer whose certificate the application's custom checkServerIdentity was written to reject, but which still passes Node's default hostname and chain checks, is accepted when reached through BalancedPool. The Client, Pool, and Agent dispatchers are not affected because they extract the connect and tls options before cloning. This affects undici versions from 7.24.1 up to 7.29.1 and from 8.0.0 up to 8.10.2, and only when the application supplies a function-valued connect or tls option to BalancedPool. Users should upgrade to undici 7.29.1 or 8.10.2. |
| undici's cache interceptor documents that only safe HTTP methods are cached, but its logic to skip caching is built by subtracting the configured methods from the set of safe methods, so an unsafe method such as POST, PUT, or DELETE is never placed in the skip list and instead falls through to the full cache-read path. The response-storage gate also lacked a method check, so a response to an unsafe request that is heuristically cacheable or carries an explicit Cache-Control directive is stored and later replayed from cache. Because response headers from a remote origin are untrusted, an origin can answer once with a cacheable status and then have the client's own subsequent state-changing requests to that path served from the stale cache entry without ever reaching the origin, an integrity failure that occurs under the interceptor's default configuration. This affects undici versions from 7.0.0 up to 7.29.1 and from 8.0.0 up to 8.10.2. Users should upgrade to undici 7.29.1 or 8.10.2. |
| undici's experimental WebSocketStream client crashes the whole Node.js process when a remote peer closes the TCP connection without a WebSocket close handshake. On an unclean close the internal socket-close handler calls abort on the writable stream unconditionally and discards the returned promise, but per the WHATWG Streams standard aborting a locked writable returns a promise that rejects with a TypeError. Because the application holds a writer on that writable, which is the only way to write, the rejection is never observed and Node's default unhandled-rejection behavior terminates the process. An untrusted server can therefore crash a client with a single abrupt disconnect, with no authentication and no application mistake. This affects undici versions from 7.0.0 up to 7.29.1 and from 8.0.0 up to 8.10.2. Users should upgrade to undici 7.29.1 or 8.10.2. |
| undici's decompress interceptor decompresses response bodies according to the untrusted Content-Encoding header. While the number of content-encoding layers is capped, the total decompressed output size is unbounded and there is no configuration option to limit it. A malicious or faulty upstream can therefore return a small compressed payload, a compression bomb, that expands to hundreds of megabytes or more in client memory, an asymmetric resource consumption that can exhaust memory and crash the process. This affects undici versions from 7.15.0 up to 7.29.1 and from 8.0.0 up to 8.10.2. Users should upgrade to undici 7.29.1 or 8.10.2. |
| Impact:
The undici WebSocket client enforces maxPayloadSize on the cumulative byte count of fragments in a message but does not enforce a limit on the number of fragments. A malicious WebSocket server can stream many small or empty continuation frames that each pass per-frame and cumulative-size validation, collectively causing unbounded memory growth in the client process. The result is memory exhaustion and a denial of service.
Affected applications are those using the undici WebSocket client (new WebSocket(...)) or the WebSocketStream API that can be induced to connect to an attacker-controlled or compromised WebSocket endpoint.
All releases starting at undici 6.17.0 are affected.
Patches: Upgrade to undici >= 6.26.0, >= 7.28.0, or >= 8.5.0. Workarounds:
No workaround is available. The fix must be applied through an upgrade. |
| Impact:
undici's ProxyAgent silently drops the requestTls option when configured with a SOCKS5 proxy URI (socks5:// or socks://). The target HTTPS connection through the SOCKS5 tunnel falls back to Node's default trust store, ignoring user-configured ca, cert, key, rejectUnauthorized, and servername settings.
Applications that pin to an internal or corporate CA via requestTls.ca will, when their proxy URI is SOCKS5, get the default Mozilla CA bundle as the trust anchor instead. Any cert signed by any publicly-trusted CA for the target hostname is accepted, breaking the intended pin and enabling MITM read and tamper of the HTTPS exchange.
Affected applications are those that use undici's ProxyAgent (or Socks5ProxyAgent directly) with SOCKS5 AND rely on requestTls for TLS scope restriction. The bug was introduced in undici 7.23.0 when SOCKS5 support was added.
Patches:
Upgrade to undici v7.28.0 or v8.5.0.
Workarounds:
No workaround is available within the SOCKS5 path. If a SOCKS5 proxy with TLS scope restriction is required and an upgrade is not yet possible, route the traffic through an HTTP-proxy ProxyAgent instead, where requestTls is honored correctly. |
| Impact:
When using Socks5ProxyAgent, undici reuses a single connection pool across different origins without verifying that the pool's origin matches the requested origin. All requests are dispatched through the pool connected to the first origin, regardless of the intended destination.
This causes cross-origin request routing: credentials and request data intended for origin B are sent to origin A, responses from the wrong origin are trusted, and HTTPS requests may be silently downgraded to HTTP.
Impacted users are applications that use Socks5ProxyAgent (directly or via setGlobalDispatcher) and make requests to more than one origin.
This was introduced in undici 7.23.0 via PR #4385 and affects all versions through 8.1.0.
Patches:
Upgrade to undici v7.26.0 or v8.2.0.
Workarounds:
Use a separate Socks5ProxyAgent instance per origin, or avoid using Socks5ProxyAgent with multiple origins. |
| A flaw in Node.js HTTP client can cause a request desynchronization for Node.js-based forwarding proxies that rebuild outbound headers from the visible `IncomingMessage` headers while piping the original body to a reused backend connection.
Node.js can omit headers beyond `maxHeadersCount` / `maxHeaderPairs` from `req.headers`, `req.rawHeaders`, and `req.headersDistinct`, while still using those omitted headers internally for HTTP message framing. In particular, `Content-Length` can be hidden from userland while the request body is still delivered.
This vulnerability affects all supported release lines: **Node.js 22**, **Node.js 24**, and **Node.js 26**. |
| A flaw in Node.js Permission Model enforcement can over-grant filesystem access across radix-tree prefix boundaries.
Under `--permission`, an attacker who is granted access to one path can abuse boundary handling to read from or write to paths outside the intended filesystem allowlist.
This vulnerability affects Node.js **main**, **22.x**, **24.x**, and **26.x**. |
| A flaw in Node.js HTTPS Agent connection reuse can cause PFX object-array key collisions, allowing mutual TLS (mTLS) client identities to be reused across requests configured with different client certificates.
This vulnerability affects Node.js **26.x**, **24.x**, and **22.x**. |
| A flaw in Node.js Permission Model enforcement allows `trace_events.createTracing().enable()` Writes Trace Logs Outside `--allow-fs-write`.
This can lead to confidentiality impact or bypass of the intended security boundary under affected configurations.
This vulnerability affects Node.js **22.x**, **24.x**, and **26.x**. |
| A flaw in Node.js Permission Model enforcement allows Bypass via `process.report.writeReport()` Path Misvalidation. This can lead to confidentiality impact or bypass of the intended security boundary under affected configurations. This vulnerability affects all supported release lines: **Node.js 22**, **Node.js 24**, and **Node.js 26**. |
| A flaw in Node.js HTTP/2 server API can cause servers to keep accepting data even after sending a `GOAWAY` frame. This vulnerability affects two supported release lines: **Node.js 22** and **Node.js 24**. |
