Export limit exceeded: 400389 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (400389 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-97578 | 1 Linux | 1 Linux Kernel | 2026-09-25 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: media: verisilicon: rockchip: guard VPU981 AV1 divisor and tile buffer rockchip_vpu981_av1_dec_set_tile_info() divides context_update_tile_id by tile_info->tile_cols and writes one descriptor per tile into the tile_info DMA buffer, which holds AV1_MAX_TILES entries; tile_cols and tile_rows come from the bitstream. Guard the division against a zero tile_cols by initialising the context-update values to zero and computing them only when tile_cols is non-zero, and stop the descriptor writes once the tile_info buffer is full. The tile geometry written to the hardware registers is left unmodified; the per-dimension and total tile bounds are enforced by the control validation. | ||||
| CVE-2026-97579 | 1 Linux | 1 Linux Kernel | 2026-09-25 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: media: mediatek: vcodec: bound AV1 tile-start copy to the array capacity vdec_av1_slice_setup_tile() copies tile_cols + 1 / tile_rows + 1 entries into mi_col_starts[] / mi_row_starts[] from the bitstream tile_info. Bound the copy to the array capacity. | ||||
| CVE-2026-97975 | 1 Linux | 1 Linux Kernel | 2026-09-25 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_sysfs: Fix NULL pointer dereference in device_del() A NULL pointer dereference in klist_put() occurs when a child device (such as a BNEP network device in bnep_session) is concurrently being unregistered while hci_conn_del_sysfs() reparents child devices. This is caused by a race condition between hci_conn_del_sysfs() and concurrent child device unregistration (e.g. bnep_session calling unregister_netdev()). During device unregistration, device_del() snapshots a non-NULL parent pointer. Concurrently, hci_conn_del_sysfs() finds the child device using device_find_any_child() and calls device_move() to reparent it to NULL, which removes the node from its parent's klist and clears knode_parent. Subsequently, device_del() calls klist_del(&dev->p->knode_parent) using the stale parent snapshot, causing klist_put() to dereference knode_klist(n)->put on an already removed node, resulting in a NULL pointer dereference. This race was introduced by commit 27aabf27fd01 ("Bluetooth: fix use-after-free in device_for_each_child()"), which replaced device_find_child(..., __match_tty) with device_find_any_child() in hci_conn_del_sysfs(). That change was intended to avoid a use-after-free where conn->dev outlived its parent hdev->dev when child devices held references to conn->dev, because conn->dev only held a reference to hdev->dev while registered in sysfs. Fix the issue properly by taking an explicit reference to the parent device with get_device(&hdev->dev) in hci_conn_init_sysfs() and dropping it with put_device(parent) in bt_link_release() when the conn device is freed. This ensures that hdev->dev remains valid for the entire lifecycle of conn->dev, resolving the underlying use-after-free. With the parent reference held properly, restore the __match_tty filter in hci_conn_del_sysfs() so that device_move() is only invoked on persistent RFCOMM TTY devices as originally intended, eliminating the race condition with unregistering network devices. | ||||
| CVE-2026-88264 | 2 Containers, Redhat | 5 Crun, Enterprise Linux, Hardened Images and 2 more | 2026-09-25 | 5.6 Medium |
| A flaw was found in crun. When the container configuration does not give /dev a dedicated mount, terminal setup can redirect /dev/console onto an attacker-controlled path, including via the read-only-rootfs bind-mount fallback. Affected versions are crun 1.29.1 and earlier. Default configurations that mount a fresh /dev are not exposed. No fixed release is available yet. | ||||
| CVE-2026-88839 | 2 Busybox, Redhat | 3 Busybox, Hardened Images, Hummingbird | 2026-09-25 | 6.7 Medium |
| BusyBox passwd/group tokenize() references a stale endpoint pointer after trimming, causing an out-of-bounds write of heap pointers. | ||||
| CVE-2026-88835 | 2 Busybox, Redhat | 3 Busybox, Hardened Images, Hummingbird | 2026-09-25 | 6.1 Medium |
| BusyBox dpkg read_package_field() steps past a NUL terminator on malformed .deb packages, causing an out-of-bounds heap read. | ||||
| CVE-2026-88837 | 2 Busybox, Redhat | 3 Busybox, Hardened Images, Hummingbird | 2026-09-25 | 6.5 Medium |
| BusyBox httpd treats yescrypt ($y$) password hashes as plaintext during Basic Authentication, inverting the authentication check. | ||||
| CVE-2026-88831 | 2 Busybox, Redhat | 3 Busybox, Hardened Images, Hummingbird | 2026-09-25 | 5.3 Medium |
| BusyBox httpd IP deny rules with invalid CIDR prefix lengths fail open, leaving a parsed IP with a zeroed mask so the rule matches no clients. | ||||
| CVE-2026-97589 | 1 Linux | 1 Linux Kernel | 2026-09-25 | 7 High |
| In the Linux kernel, the following vulnerability has been resolved: s390/crypto: Fix wrong return code to engine in asynch callbacks When crypto_finalize_hash_request() or crypto_finalize_skcipher_request() explicitly completes a request, the do_one_request callback must return 0 to indicate successful handling. Returning a negative error code causes the crypto engine to assume the driver failed to take ownership and triggers a second completion via crypto_request_complete(), resulting in a double completion. This pattern occurs in paes_s390.c 4 times and once in phmac_s390.c. Fixed in phmac_do_one_request() and all four paes do_one_request callbacks (ecb, cbc, ctr, xts) by returning 0 after explicit finalization instead of propagating the error code. | ||||
| CVE-2026-97594 | 1 Linux | 1 Linux Kernel | 2026-09-25 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: landlock: Fix use-after-free of the source's parent directory current_check_refer_path() reads old_dentry->d_parent without holding a reference nor a lock on it, and then dereferences it in collect_domain_accesses() and in the audit record. A reference on a child does not pin its parent: __d_move() reassigns dentry->d_parent and drops the reference the child held on its former parent. hook_path_rename() is not affected because the rename path calls lock_rename() before the hook, so the source cannot be reparented under it. hook_path_link() has no such protection: filename_linkat() holds a reference on the source dentry but neither locks nor references its parent, so a concurrent rename(2) can reparent the source while security_path_link() runs, and the former parent can then be removed and freed while the hook walks it. A process can trigger this after entering a Landlock domain that handles at least one filesystem access right. The process can then race a linkat(2) loop against rename(2) and rmdir(2): BUG: KASAN: slab-use-after-free in collect_domain_accesses+0x278/0x290 Read of size 4 at addr ffff888160bd53f4 by task llrepro2/549 collect_domain_accesses+0x278/0x290 current_check_refer_path+0x952/0x1120 security_path_link+0x1be/0x320 filename_linkat+0x342/0x6d0 __x64_sys_linkat+0xfa/0x150 Freed by task 562: kmem_cache_free+0x139/0x4c0 i_callback+0x4b/0x80 rcu_core+0x7dc/0x10a0 Take a reference on the dentry selected as the source parent, using dget() for the common-mount-root case and dget_parent() otherwise. Release it after the hierarchy walk and synchronous audit logging. [mic: Clarify the caller, reachability, and reference handling] | ||||
| CVE-2026-97915 | 1 Linux | 1 Linux Kernel | 2026-09-25 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: accel/ivpu: Limit firmware log name prints to field size The name in struct vpu_tracing_buffer_header is a fixed-size array populated by the NPU firmware. It is expected to be NUL-terminated, but nothing on the host side enforces this, so printing it with an unbounded string conversion would read past the field if the terminator is ever missing and expose adjacent bytes of the shared tracing BO through dmesg and the debugfs FW log output. Print at most as many characters as the name field holds, so the output never runs past it even if the string is not NUL-terminated. | ||||
| CVE-2026-97939 | 1 Linux | 1 Linux Kernel | 2026-09-25 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ipmr: account multicast table and route memory A netadmin in a user+net namespace can create many IPv4 and IPv6 multicast routing tables with MRT_TABLE and MRT6_TABLE. Each unseen id allocates an mr_table via the shared mr_table_alloc(), links it into the per-net list, and leaves it until netns teardown. Those objects were not charged to memcg, so the host unreclaimable slab grows with the table count. Account mr_table allocations with GFP_KERNEL_ACCOUNT and mark the IPv4/IPv6 MFC caches SLAB_ACCOUNT. This matches the established handling of IP addresses, routes and alternate interface names. Unresolved MFC entries are still allocated from softIRQ with GFP_ATOMIC and are not charged. They expire after 10 seconds and are bounded by the socket receive queue; see commit 0079ad8e8dc3 ("ipmr: remove hard code cache_resolve_queue_len limit"). | ||||
| CVE-2026-88832 | 2 Busybox, Redhat | 3 Busybox, Hardened Images, Hummingbird | 2026-09-25 | 7.3 High |
| BusyBox romfs volume ID parsing uses unbounded strlen on attacker-controlled metadata, causing a heap buffer overflow when processing crafted filesystem images. | ||||
| CVE-2026-97916 | 1 Linux | 1 Linux Kernel | 2026-09-25 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: accel/ivpu: Validate firmware log buffer metadata The tracing log headers parsed by fw_log_print_buffer() reside in DMA-shared BOs that the NPU firmware can write to. fw_log_from_bo() validated log->header_size and log->size, but fw_log_print_buffer() re-read those same fields from shared memory afterwards, allowing a TOCTOU where firmware changes them between the check and the use, and making the host dereference out-of-bounds addresses while printing logs. Snapshot the validated values once with READ_ONCE() and pass them down explicitly in a new struct ivpu_fw_log_desc instead of re-reading them from the shared struct. | ||||
| CVE-2026-97921 | 1 Linux | 1 Linux Kernel | 2026-09-25 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: tracing: Free histogram the field rejected for a bad modifier Writing a hist trigger whose value or variable carries a modifier that is not allowed there leaks the fields that were built for it. __create_val_field() takes the field from parse_expr() and stores it in hist_data->fields[] only after the modifier checks have run: hist_field = parse_expr(hist_data, file, field_str, flags, var_name, &n_subexprs); ... if (hist_field->flags & HIST_FIELD_FL_VAR) { if (hist_field->flags & (...)) goto err; } else { if (hist_field->flags & (...)) goto err; } hist_data->fields[val_idx] = hist_field; Both checks jump past that store, and the err label returns without freeing anything. The error unwinds to create_hist_data(), which calls destroy_hist_data() -> destroy_hist_fields(), and that reaches a field only by walking fields[]. A field that never got there is unreachable. commit e0213434fe3e ("tracing: Do not let histogram values have some modifiers") set ret to -EINVAL and fell through to the store, which left the field owned by fields[] and freed along with the rest of hist_data. Splitting the check into a value case and a variable case replaced that fall-through with a goto that skips it. With CONFIG_DEBUG_KMEMLEAK, 200 writes of # echo 'hist:keys=prev_pid:vals=next_pid.log2' > \ events/sched/sched_switch/trigger each correctly rejected with -EINVAL, leave 332 unreferenced objects (63744 bytes) reported at create_hist_field(); 200 install and remove cycles of a valid trigger leave none. A '.log2' field is two allocations, since create_hist_field() puts the plain field in operands[0] of the log2 field, and both are reported. Use destroy_hist_field() rather than __destroy_hist_field() so that operands[0] is freed as well. It returns early for HIST_FIELD_FL_VAR_REF, which is what an operand owned by hist_data->var_refs[] needs; the rejected field itself is never a var ref, because a var ref never carries a modifier flag. | ||||
| CVE-2026-97922 | 1 Linux | 1 Linux Kernel | 2026-09-25 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: tracing: Free histogram var refs regardless of how often they are referenced Using the same variable three or more times in one hist trigger leaks the variable reference and its strings when the trigger is removed. commit 656fe2ba85e8 ("tracing: Use hist trigger's var_ref array to destroy var_refs") made a trigger's var_refs[] array the only owner of a var ref: destroy_hist_field() returns early for HIST_FIELD_FL_VAR_REF, so the field expressions never destroy one. One entry, freed once, no count needed. commit 8bcebc77e85f ("tracing: Fix histogram code when expression has same var as value") then made repeated references share one object and added a count of them. Only the increment side exists, since those expressions still return early and never drop a reference, so __destroy_hist_field() sees how many references were created rather than how many are left. It frees when the decremented count is 0 or 1, so two references work and three or more leak. Sharing kept one array entry per object, and create_var_ref() searches and appends within a single trigger, so nothing outside it holds the object. Removing a trigger whose variables are still referenced is already refused by check_var_refs() with -EBUSY. Drop the count and free unconditionally. | ||||
| CVE-2026-97601 | 1 Linux | 1 Linux Kernel | 2026-09-25 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ieee802154: 6lowpan: fix NULL dereference in lowpan_newlink TUNSETLINK allows a TUN device to change its link-layer type to ARPHRD_IEEE802154 without initializing ieee802154_ptr. lowpan_newlink() checks only the device type before dereferencing the pointer, so an RTM_NEWLINK request can trigger a NULL pointer dereference. Reject devices without ieee802154_ptr along with devices of the wrong type. | ||||
| CVE-2026-97609 | 1 Linux | 1 Linux Kernel | 2026-09-25 | 7 High |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: cttimeout: prevent UAF during module unload nf_ct_set_timeout() protects the timeout hook dereference and policy lookup with rcu_read_lock(). cttimeout_exit(), however, unregisters the per-net operations before it clears the hook. This allows the following interleaving: CPU 0 CPU 1 cttimeout_exit() nf_ct_set_timeout() unregister_pernet_subsys() rcu_read_lock() kfree(pernet) h = nf_ct_timeout_hook h->timeout_find_get() nfct_timeout_pernet() The hook still points to ctnl_timeout_find_get() when CPU 1 looks up the already freed per-net timeout list. KASAN reported: BUG: KASAN: slab-use-after-free in ctnl_timeout_find_get Read of size 8 by task poc/90 Call Trace: ctnl_timeout_find_get+0x271/0x2a0 [nfnetlink_cttimeout] nf_ct_set_timeout+0x7b/0x3c0 xt_ct_tg_check+0x724/0xb20 xt_check_target+0x234/0xa90 do_ipt_set_ctl+0x570/0x1270 Allocated by task 89: __kmalloc_noprof+0x16e/0x460 ops_init+0x6d/0x420 register_pernet_operations+0x2f6/0x670 Freed by task 91: kfree+0x131/0x390 ops_undo_list+0x3d4/0x730 unregister_pernet_operations+0x232/0x490 unregister_pernet_subsys+0x1c/0x30 cttimeout_exit+0x52/0x970 [nfnetlink_cttimeout] Clear the hook and wait for existing readers before unregistering the per-net operations. This blocks new policy lookups and ensures readers that observed the hook finish before the per-net storage is freed. | ||||
| CVE-2026-97942 | 1 Linux | 1 Linux Kernel | 2026-09-25 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: x86/alternatives: Exclude text poking against change_page_attr() From time to time, the following BUG can be observed in the x86 alternatives patching code [0]: > kernel BUG at arch/x86/kernel/alternative.c:2576! > Oops: invalid opcode: 0000 [#1] SMP NOPTI > CPU: 0 UID: 0 PID: 355 Comm: (udev-worker) Not tainted 7.1.3-1-default #1 PREEMPT(full) openSUSE Tumbleweed 8c1795b03ec64f997e57a8ad38b1161e3b98da64 > Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS unknown 02/02/2022 > RIP: 0010:__text_poke+0x2aa/0x450 > Call Trace: > <TASK> > smp_text_poke_batch_finish+0x2a7/0x320 > __static_call_transform+0xb7/0x220 > arch_static_call_transform+0x5b/0xb0 > __static_call_init+0xe9/0x270 > static_call_module_notify+0x11f/0x150 > notifier_call_chain+0x61/0xe0 > blocking_notifier_call_chain_robust+0x63/0xc0 > load_module+0x1c92/0x20c0 > init_module_from_file+0xd8/0x140 > idempotent_init_module+0x100/0x2f0 > __x64_sys_finit_module+0x71/0xe0 > do_syscall_64+0xe1/0x610 > entry_SYSCALL_64_after_hwframe+0x76/0x7e which matches the following BUG_ON() in alternative.c: /* * If something went wrong, crash and burn since recovery paths are not * implemented. */ BUG_ON(!pages[0] || (cross_page_boundary && !pages[1])); This can happen if vmalloc_to_page() fails, for any reason. Such can happen if text poking races with CPA, which can possibly result in the collapsing of page tables (or breaking of PMD hugepages). It is not a problem for most users of vmalloc_to_page() (they solely own the vmalloc'd range) but, when CONFIG_ARCH_HAS_EXECMEM_ROX=y, various modules own a single execmem vmalloc range, and can call set_memory_*() in parallel on it. This can happen to race against __text_poke and cause havoc in vmalloc_to_page(). Fix it by excluding against CPA using the init_mm mmap read lock. [ dhansen: Fix up SoB ordering. The actual code flow here was: Pedro=>Lorenzo=>Mike=>Me which is reflected in the SoB chain now. I *believe* Mike simply picked up Lorenzo's update to Pedro's post from the Link ] | ||||
| CVE-2026-97908 | 1 Linux | 1 Linux Kernel | 2026-09-25 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btqcomsmd: destroy RPMsg endpoints before freeing hci_dev The command and ACL RPMsg endpoints store struct btqcomsmd as their callback private data. The receive callbacks dereference btq->hdev without taking an hci_dev reference. The current teardown order frees the hci_dev before destroying the RPMsg endpoints in both the hci_register_dev() error path and the driver remove path. If WCNSS delivers data in that window, the endpoint callback can run with an already freed hci_dev and pass it to the Bluetooth core. For qcom_smd endpoints, rpmsg_destroy_ept() closes the channel and clears the callback under the channel recv_lock. The receive path holds the same lock while invoking the callback, so destroying the endpoints first both prevents new callbacks and serializes with any callback already running. Destroy the command and ACL endpoints before hci_free_dev(). Keep hci_unregister_dev() first during remove so the HCI core stops issuing operations before the transport endpoints are shut down. In the full registration-error cleanup path, return directly after freeing the hci_dev to avoid falling through to the partial-construction labels and destroying the endpoints twice. | ||||