Export limit exceeded: 412821 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 412821 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (412821 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-31560 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: spi: spi-dw-dma: fix print error log when wait finish transaction If an error occurs, the device may not have a current message. In this case, the system will crash. In this case, it's better to use dev from the struct ctlr (struct spi_controller*). | ||||
| CVE-2026-31557 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: nvmet: move async event work off nvmet-wq For target nvmet_ctrl_free() flushes ctrl->async_event_work. If nvmet_ctrl_free() runs on nvmet-wq, the flush re-enters workqueue completion for the same worker:- A. Async event work queued on nvmet-wq (prior to disconnect): nvmet_execute_async_event() queue_work(nvmet_wq, &ctrl->async_event_work) nvmet_add_async_event() queue_work(nvmet_wq, &ctrl->async_event_work) B. Full pre-work chain (RDMA CM path): nvmet_rdma_cm_handler() nvmet_rdma_queue_disconnect() __nvmet_rdma_queue_disconnect() queue_work(nvmet_wq, &queue->release_work) process_one_work() lock((wq_completion)nvmet-wq) <--------- 1st nvmet_rdma_release_queue_work() C. Recursive path (same worker): nvmet_rdma_release_queue_work() nvmet_rdma_free_queue() nvmet_sq_destroy() nvmet_ctrl_put() nvmet_ctrl_free() flush_work(&ctrl->async_event_work) __flush_work() touch_wq_lockdep_map() lock((wq_completion)nvmet-wq) <--------- 2nd Lockdep splat: ============================================ WARNING: possible recursive locking detected 6.19.0-rc3nvme+ #14 Tainted: G N -------------------------------------------- kworker/u192:42/44933 is trying to acquire lock: ffff888118a00948 ((wq_completion)nvmet-wq){+.+.}-{0:0}, at: touch_wq_lockdep_map+0x26/0x90 but task is already holding lock: ffff888118a00948 ((wq_completion)nvmet-wq){+.+.}-{0:0}, at: process_one_work+0x53e/0x660 3 locks held by kworker/u192:42/44933: #0: ffff888118a00948 ((wq_completion)nvmet-wq){+.+.}-{0:0}, at: process_one_work+0x53e/0x660 #1: ffffc9000e6cbe28 ((work_completion)(&queue->release_work)){+.+.}-{0:0}, at: process_one_work+0x1c5/0x660 #2: ffffffff82d4db60 (rcu_read_lock){....}-{1:3}, at: __flush_work+0x62/0x530 Workqueue: nvmet-wq nvmet_rdma_release_queue_work [nvmet_rdma] Call Trace: __flush_work+0x268/0x530 nvmet_ctrl_free+0x140/0x310 [nvmet] nvmet_cq_put+0x74/0x90 [nvmet] nvmet_rdma_free_queue+0x23/0xe0 [nvmet_rdma] nvmet_rdma_release_queue_work+0x19/0x50 [nvmet_rdma] process_one_work+0x206/0x660 worker_thread+0x184/0x320 kthread+0x10c/0x240 ret_from_fork+0x319/0x390 Move async event work to a dedicated nvmet-aen-wq to avoid reentrant flush on nvmet-wq. | ||||
| CVE-2026-31531 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ipv4: nexthop: allocate skb dynamically in rtm_get_nexthop() When querying a nexthop object via RTM_GETNEXTHOP, the kernel currently allocates a fixed-size skb using NLMSG_GOODSIZE. While sufficient for single nexthops and small Equal-Cost Multi-Path groups, this fixed allocation fails for large nexthop groups like 512 nexthops. This results in the following warning splat: WARNING: net/ipv4/nexthop.c:3395 at rtm_get_nexthop+0x176/0x1c0, CPU#20: rep/4608 [...] RIP: 0010:rtm_get_nexthop (net/ipv4/nexthop.c:3395) [...] Call Trace: <TASK> rtnetlink_rcv_msg (net/core/rtnetlink.c:6989) netlink_rcv_skb (net/netlink/af_netlink.c:2550) netlink_unicast (net/netlink/af_netlink.c:1319 net/netlink/af_netlink.c:1344) netlink_sendmsg (net/netlink/af_netlink.c:1894) ____sys_sendmsg (net/socket.c:721 net/socket.c:736 net/socket.c:2585) ___sys_sendmsg (net/socket.c:2641) __sys_sendmsg (net/socket.c:2671) do_syscall_64 (arch/x86/entry/syscall_64.c:63 arch/x86/entry/syscall_64.c:94) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130) </TASK> Fix this by allocating the size dynamically using nh_nlmsg_size() and using nlmsg_new(), this is consistent with nexthop_notify() behavior. In addition, adjust nh_nlmsg_size_grp() so it calculates the size needed based on flags passed. While at it, also add the size of NHA_FDB for nexthop group size calculation as it was missing too. This cannot be reproduced via iproute2 as the group size is currently limited and the command fails as follows: addattr_l ERROR: message exceeded bound of 1048 | ||||
| CVE-2026-31530 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: cxl/port: Fix use after free of parent_port in cxl_detach_ep() cxl_detach_ep() is called during bottom-up removal when all CXL memory devices beneath a switch port have been removed. For each port in the hierarchy it locks both the port and its parent, removes the endpoint, and if the port is now empty, marks it dead and unregisters the port by calling delete_switch_port(). There are two places during this work where the parent_port may be used after freeing: First, a concurrent detach may have already processed a port by the time a second worker finds it via bus_find_device(). Without pinning parent_port, it may already be freed when we discover port->dead and attempt to unlock the parent_port. In a production kernel that's a silent memory corruption, with lock debug, it looks like this: []DEBUG_LOCKS_WARN_ON(__owner_task(owner) != get_current()) []WARNING: kernel/locking/mutex.c:949 at __mutex_unlock_slowpath+0x1ee/0x310 []Call Trace: []mutex_unlock+0xd/0x20 []cxl_detach_ep+0x180/0x400 [cxl_core] []devm_action_release+0x10/0x20 []devres_release_all+0xa8/0xe0 []device_unbind_cleanup+0xd/0xa0 []really_probe+0x1a6/0x3e0 Second, delete_switch_port() releases three devm actions registered against parent_port. The last of those is unregister_port() and it calls device_unregister() on the child port, which can cascade. If parent_port is now also empty the device core may unregister and free it too. So by the time delete_switch_port() returns, parent_port may be free, and the subsequent device_unlock(&parent_port->dev) operates on freed memory. The kernel log looks same as above, with a different offset in cxl_detach_ep(). Both of these issues stem from the absence of a lifetime guarantee between a child port and its parent port. Establish a lifetime rule for ports: child ports hold a reference to their parent device until release. Take the reference when the port is allocated and drop it when released. This ensures the parent is valid for the full lifetime of the child and eliminates the use after free window in cxl_detach_ep(). This is easily reproduced with a reload of cxl_acpi in QEMU with CXL devices present. | ||||
| CVE-2026-31526 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Fix exception exit lock checking for subprogs process_bpf_exit_full() passes check_lock = !curframe to check_resource_leak(), which is false in cases when bpf_throw() is called from a static subprog. This makes check_resource_leak() to skip validation of active_rcu_locks, active_preempt_locks, and active_irq_id on exception exits from subprogs. At runtime bpf_throw() unwinds the stack via ORC without releasing any user-acquired locks, which may cause various issues as the result. Fix by setting check_lock = true for exception exits regardless of curframe, since exceptions bypass all intermediate frame cleanup. Update the error message prefix to "bpf_throw" for exception exits to distinguish them from normal BPF_EXIT. Fix reject_subprog_with_rcu_read_lock test which was previously passing for the wrong reason. Test program returned directly from the subprog call without closing the RCU section, so the error was triggered by the unclosed RCU lock on normal exit, not by bpf_throw. Update __msg annotations for affected tests to match the new "bpf_throw" error prefix. The spin_lock case is not affected because they are already checked [1] at the call site in do_check_insn() before bpf_throw can run. [1] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/kernel/bpf/verifier.c?h=v7.0-rc4#n21098 | ||||
| CVE-2026-31506 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net: bcmasp: fix double free of WoL irq We do not need to free wol_irq since it was instantiated with devm_request_irq(). So devres will free for us. | ||||
| CVE-2026-31505 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: iavf: fix out-of-bounds writes in iavf_get_ethtool_stats() iavf incorrectly uses real_num_tx_queues for ETH_SS_STATS. Since the value could change in runtime, we should use num_tx_queues instead. Moreover iavf_get_ethtool_stats() uses num_active_queues while iavf_get_sset_count() and iavf_get_stat_strings() use real_num_tx_queues, which triggers out-of-bounds writes when we do "ethtool -L" and "ethtool -S" simultaneously [1]. For example when we change channels from 1 to 8, Thread 3 could be scheduled before Thread 2, and out-of-bounds writes could be triggered in Thread 3: Thread 1 (ethtool -L) Thread 2 (work) Thread 3 (ethtool -S) iavf_set_channels() ... iavf_alloc_queues() -> num_active_queues = 8 iavf_schedule_finish_config() iavf_get_sset_count() real_num_tx_queues: 1 -> buffer for 1 queue iavf_get_ethtool_stats() num_active_queues: 8 -> out-of-bounds! iavf_finish_config() -> real_num_tx_queues = 8 Use immutable num_tx_queues in all related functions to avoid the issue. [1] BUG: KASAN: vmalloc-out-of-bounds in iavf_add_one_ethtool_stat+0x200/0x270 Write of size 8 at addr ffffc900031c9080 by task ethtool/5800 CPU: 1 UID: 0 PID: 5800 Comm: ethtool Not tainted 6.19.0-enjuk-08403-g8137e3db7f1c #241 PREEMPT(full) Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x6f/0xb0 print_report+0x170/0x4f3 kasan_report+0xe1/0x180 iavf_add_one_ethtool_stat+0x200/0x270 iavf_get_ethtool_stats+0x14c/0x2e0 __dev_ethtool+0x3d0c/0x5830 dev_ethtool+0x12d/0x270 dev_ioctl+0x53c/0xe30 sock_do_ioctl+0x1a9/0x270 sock_ioctl+0x3d4/0x5e0 __x64_sys_ioctl+0x137/0x1c0 do_syscall_64+0xf3/0x690 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f7da0e6e36d ... </TASK> The buggy address belongs to a 1-page vmalloc region starting at 0xffffc900031c9000 allocated at __dev_ethtool+0x3cc9/0x5830 The buggy address belongs to the physical page: page: refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff88813a013de0 pfn:0x13a013 flags: 0x200000000000000(node=0|zone=2) raw: 0200000000000000 0000000000000000 dead000000000122 0000000000000000 raw: ffff88813a013de0 0000000000000000 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffffc900031c8f80: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 ffffc900031c9000: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 >ffffc900031c9080: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 ^ ffffc900031c9100: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 ffffc900031c9180: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 | ||||
| CVE-2026-31493 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/efa: Fix use of completion ctx after free On admin queue completion handling, if the admin command completed with error we print data from the completion context. The issue is that we already freed the completion context in polling/interrupts handler which means we print data from context in an unknown state (it might be already used again). Change the admin submission flow so alloc/dealloc of the context will be symmetric and dealloc will be called after any potential use of the context. | ||||
| CVE-2026-31487 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: spi: use generic driver_override infrastructure When a driver is probed through __driver_attach(), the bus' match() callback is called without the device lock held, thus accessing the driver_override field without a lock, which can cause a UAF. Fix this by using the driver-core driver_override infrastructure taking care of proper locking internally. Note that calling match() from __driver_attach() without the device lock held is intentional. [1] Also note that we do not enable the driver_override feature of struct bus_type, as SPI - in contrast to most other buses - passes "" to sysfs_emit() when the driver_override pointer is NULL. Thus, printing "\n" instead of "(null)\n". | ||||
| CVE-2026-31462 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: prevent immediate PASID reuse case PASID resue could cause interrupt issue when process immediately runs into hw state left by previous process exited with the same PASID, it's possible that page faults are still pending in the IH ring buffer when the process exits and frees up its PASID. To prevent the case, it uses idr cyclic allocator same as kernel pid's. (cherry picked from commit 8f1de51f49be692de137c8525106e0fce2d1912d) | ||||
| CVE-2026-31410 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: use volume UUID in FS_OBJECT_ID_INFORMATION Use sb->s_uuid for a proper volume identifier as the primary choice. For filesystems that do not provide a UUID, fall back to stfs.f_fsid obtained from vfs_statfs(). | ||||
| CVE-2026-23472 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: serial: core: fix infinite loop in handle_tx() for PORT_UNKNOWN uart_write_room() and uart_write() behave inconsistently when xmit_buf is NULL (which happens for PORT_UNKNOWN ports that were never properly initialized): - uart_write_room() returns kfifo_avail() which can be > 0 - uart_write() checks xmit_buf and returns 0 if NULL This inconsistency causes an infinite loop in drivers that rely on tty_write_room() to determine if they can write: while (tty_write_room(tty) > 0) { written = tty->ops->write(...); // written is always 0, loop never exits } For example, caif_serial's handle_tx() enters an infinite loop when used with PORT_UNKNOWN serial ports, causing system hangs. Fix by making uart_write_room() also check xmit_buf and return 0 if it's NULL, consistent with uart_write(). Reproducer: https://gist.github.com/mrpre/d9a694cc0e19828ee3bc3b37983fde13 | ||||
| CVE-2026-23459 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 8.2 High |
| In the Linux kernel, the following vulnerability has been resolved: ip_tunnel: adapt iptunnel_xmit_stats() to NETDEV_PCPU_STAT_DSTATS Blamed commits forgot that vxlan/geneve use udp_tunnel[6]_xmit_skb() which call iptunnel_xmit_stats(). iptunnel_xmit_stats() was assuming tunnels were only using NETDEV_PCPU_STAT_TSTATS. @syncp offset in pcpu_sw_netstats and pcpu_dstats is different. 32bit kernels would either have corruptions or freezes if the syncp sequence was overwritten. This patch also moves pcpu_stat_type closer to dev->{t,d}stats to avoid a potential cache line miss since iptunnel_xmit_stats() needs to read it. | ||||
| CVE-2026-23385 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: clone set on flush only Syzbot with fault injection triggered a failing memory allocation with GFP_KERNEL which results in a WARN splat: iter.err WARNING: net/netfilter/nf_tables_api.c:845 at nft_map_deactivate+0x34e/0x3c0 net/netfilter/nf_tables_api.c:845, CPU#0: syz.0.17/5992 Modules linked in: CPU: 0 UID: 0 PID: 5992 Comm: syz.0.17 Not tainted syzkaller #0 PREEMPT(full) Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 02/12/2026 RIP: 0010:nft_map_deactivate+0x34e/0x3c0 net/netfilter/nf_tables_api.c:845 Code: 8b 05 86 5a 4e 09 48 3b 84 24 a0 00 00 00 75 62 48 8d 65 d8 5b 41 5c 41 5d 41 5e 41 5f 5d c3 cc cc cc cc cc e8 63 6d fa f7 90 <0f> 0b 90 43 +80 7c 35 00 00 0f 85 23 fe ff ff e9 26 fe ff ff 89 d9 RSP: 0018:ffffc900045af780 EFLAGS: 00010293 RAX: ffffffff89ca45bd RBX: 00000000fffffff4 RCX: ffff888028111e40 RDX: 0000000000000000 RSI: 00000000fffffff4 RDI: 0000000000000000 RBP: ffffc900045af870 R08: 0000000000400dc0 R09: 00000000ffffffff R10: dffffc0000000000 R11: fffffbfff1d141db R12: ffffc900045af7e0 R13: 1ffff920008b5f24 R14: dffffc0000000000 R15: ffffc900045af920 FS: 000055557a6a5500(0000) GS:ffff888125496000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fb5ea271fc0 CR3: 000000003269e000 CR4: 00000000003526f0 Call Trace: <TASK> __nft_release_table+0xceb/0x11f0 net/netfilter/nf_tables_api.c:12115 nft_rcv_nl_event+0xc25/0xdb0 net/netfilter/nf_tables_api.c:12187 notifier_call_chain+0x19d/0x3a0 kernel/notifier.c:85 blocking_notifier_call_chain+0x6a/0x90 kernel/notifier.c:380 netlink_release+0x123b/0x1ad0 net/netlink/af_netlink.c:761 __sock_release net/socket.c:662 [inline] sock_close+0xc3/0x240 net/socket.c:1455 Restrict set clone to the flush set command in the preparation phase. Add NFT_ITER_UPDATE_CLONE and use it for this purpose, update the rbtree and pipapo backends to only clone the set when this iteration type is used. As for the existing NFT_ITER_UPDATE type, update the pipapo backend to use the existing set clone if available, otherwise use the existing set representation. After this update, there is no need to clone a set that is being deleted, this includes bound anonymous set. An alternative approach to NFT_ITER_UPDATE_CLONE is to add a .clone interface and call it from the flush set path. | ||||
| CVE-2026-23383 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf, arm64: Force 8-byte alignment for JIT buffer to prevent atomic tearing struct bpf_plt contains a u64 target field. Currently, the BPF JIT allocator requests an alignment of 4 bytes (sizeof(u32)) for the JIT buffer. Because the base address of the JIT buffer can be 4-byte aligned (e.g., ending in 0x4 or 0xc), the relative padding logic in build_plt() fails to ensure that target lands on an 8-byte boundary. This leads to two issues: 1. UBSAN reports misaligned-access warnings when dereferencing the structure. 2. More critically, target is updated concurrently via WRITE_ONCE() in bpf_arch_text_poke() while the JIT'd code executes ldr. On arm64, 64-bit loads/stores are only guaranteed to be single-copy atomic if they are 64-bit aligned. A misaligned target risks a torn read, causing the JIT to jump to a corrupted address. Fix this by increasing the allocation alignment requirement to 8 bytes (sizeof(u64)) in bpf_jit_binary_pack_alloc(). This anchors the base of the JIT buffer to an 8-byte boundary, allowing the relative padding math in build_plt() to correctly align the target field. | ||||
| CVE-2026-23377 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ice: change XDP RxQ frag_size from DMA write length to xdp.frame_sz The only user of frag_size field in XDP RxQ info is bpf_xdp_frags_increase_tail(). It clearly expects whole buff size instead of DMA write size. Different assumptions in ice driver configuration lead to negative tailroom. This allows to trigger kernel panic, when using XDP_ADJUST_TAIL_GROW_MULTI_BUFF xskxceiver test and changing packet size to 6912 and the requested offset to a huge value, e.g. XSK_UMEM__MAX_FRAME_SIZE * 100. Due to other quirks of the ZC configuration in ice, panic is not observed in ZC mode, but tailroom growing still fails when it should not. Use fill queue buffer truesize instead of DMA write size in XDP RxQ info. Fix ZC mode too by using the new helper. | ||||
| CVE-2026-23371 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: sched/deadline: Fix missing ENQUEUE_REPLENISH during PI de-boosting Running stress-ng --schedpolicy 0 on an RT kernel on a big machine might lead to the following WARNINGs (edited). sched: DL de-boosted task PID 22725: REPLENISH flag missing WARNING: CPU: 93 PID: 0 at kernel/sched/deadline.c:239 dequeue_task_dl+0x15c/0x1f8 ... (running_bw underflow) Call trace: dequeue_task_dl+0x15c/0x1f8 (P) dequeue_task+0x80/0x168 deactivate_task+0x24/0x50 push_dl_task+0x264/0x2e0 dl_task_timer+0x1b0/0x228 __hrtimer_run_queues+0x188/0x378 hrtimer_interrupt+0xfc/0x260 ... The problem is that when a SCHED_DEADLINE task (lock holder) is changed to a lower priority class via sched_setscheduler(), it may fail to properly inherit the parameters of potential DEADLINE donors if it didn't already inherit them in the past (shorter deadline than donor's at that time). This might lead to bandwidth accounting corruption, as enqueue_task_dl() won't recognize the lock holder as boosted. The scenario occurs when: 1. A DEADLINE task (donor) blocks on a PI mutex held by another DEADLINE task (holder), but the holder doesn't inherit parameters (e.g., it already has a shorter deadline) 2. sched_setscheduler() changes the holder from DEADLINE to a lower class while still holding the mutex 3. The holder should now inherit DEADLINE parameters from the donor and be enqueued with ENQUEUE_REPLENISH, but this doesn't happen Fix the issue by introducing __setscheduler_dl_pi(), which detects when a DEADLINE (proper or boosted) task gets setscheduled to a lower priority class. In case, the function makes the task inherit DEADLINE parameters of the donoer (pi_se) and sets ENQUEUE_REPLENISH flag to ensure proper bandwidth accounting during the next enqueue operation. | ||||
| CVE-2026-23361 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: PCI: dwc: ep: Flush MSI-X write before unmapping its ATU entry Endpoint drivers use dw_pcie_ep_raise_msix_irq() to raise an MSI-X interrupt to the host using a writel(), which generates a PCI posted write transaction. There's no completion for posted writes, so the writel() may return before the PCI write completes. dw_pcie_ep_raise_msix_irq() also unmaps the outbound ATU entry used for the PCI write, so the write races with the unmap. If the PCI write loses the race with the ATU unmap, the write may corrupt host memory or cause IOMMU errors, e.g., these when running fio with a larger queue depth against nvmet-pci-epf: arm-smmu-v3 fc900000.iommu: 0x0000010000000010 arm-smmu-v3 fc900000.iommu: 0x0000020000000000 arm-smmu-v3 fc900000.iommu: 0x000000090000f040 arm-smmu-v3 fc900000.iommu: 0x0000000000000000 arm-smmu-v3 fc900000.iommu: event: F_TRANSLATION client: 0000:01:00.0 sid: 0x100 ssid: 0x0 iova: 0x90000f040 ipa: 0x0 arm-smmu-v3 fc900000.iommu: unpriv data write s1 "Input address caused fault" stag: 0x0 Flush the write by performing a readl() of the same address to ensure that the write has reached the destination before the ATU entry is unmapped. The same problem was solved for dw_pcie_ep_raise_msi_irq() in commit 8719c64e76bf ("PCI: dwc: ep: Cache MSI outbound iATU mapping"), but there it was solved by dedicating an outbound iATU only for MSI. We can't do the same for MSI-X because each vector can have a different msg_addr and the msg_addr may be changed while the vector is masked. [bhelgaas: commit log] | ||||
| CVE-2026-23327 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: cxl/mbox: validate payload size before accessing contents in cxl_payload_from_user_allowed() cxl_payload_from_user_allowed() casts and dereferences the input payload without first verifying its size. When a raw mailbox command is sent with an undersized payload (ie: 1 byte for CXL_MBOX_OP_CLEAR_LOG, which expects a 16-byte UUID), uuid_equal() reads past the allocated buffer, triggering a KASAN splat: BUG: KASAN: slab-out-of-bounds in memcmp+0x176/0x1d0 lib/string.c:683 Read of size 8 at addr ffff88810130f5c0 by task syz.1.62/2258 CPU: 2 UID: 0 PID: 2258 Comm: syz.1.62 Not tainted 6.19.0-dirty #3 PREEMPT(voluntary) Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.17.0-0-gb52ca86e094d-prebuilt.qemu.org 04/01/2014 Call Trace: <TASK> __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0xab/0xe0 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:378 [inline] print_report+0xce/0x650 mm/kasan/report.c:482 kasan_report+0xce/0x100 mm/kasan/report.c:595 memcmp+0x176/0x1d0 lib/string.c:683 uuid_equal include/linux/uuid.h:73 [inline] cxl_payload_from_user_allowed drivers/cxl/core/mbox.c:345 [inline] cxl_mbox_cmd_ctor drivers/cxl/core/mbox.c:368 [inline] cxl_validate_cmd_from_user drivers/cxl/core/mbox.c:522 [inline] cxl_send_cmd+0x9c0/0xb50 drivers/cxl/core/mbox.c:643 __cxl_memdev_ioctl drivers/cxl/core/memdev.c:698 [inline] cxl_memdev_ioctl+0x14f/0x190 drivers/cxl/core/memdev.c:713 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:597 [inline] __se_sys_ioctl fs/ioctl.c:583 [inline] __x64_sys_ioctl+0x18e/0x210 fs/ioctl.c:583 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xa8/0x330 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7fdaf331ba79 Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 a8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fdaf1d77038 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 00007fdaf3585fa0 RCX: 00007fdaf331ba79 RDX: 00002000000001c0 RSI: 00000000c030ce02 RDI: 0000000000000003 RBP: 00007fdaf33749df R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 00007fdaf3586038 R14: 00007fdaf3585fa0 R15: 00007ffced2af768 </TASK> Add 'in_size' parameter to cxl_payload_from_user_allowed() and validate the payload is large enough. | ||||
| CVE-2026-23276 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: add xmit recursion limit to tunnel xmit functions Tunnel xmit functions (iptunnel_xmit, ip6tunnel_xmit) lack their own recursion limit. When a bond device in broadcast mode has GRE tap interfaces as slaves, and those GRE tunnels route back through the bond, multicast/broadcast traffic triggers infinite recursion between bond_xmit_broadcast() and ip_tunnel_xmit()/ip6_tnl_xmit(), causing kernel stack overflow. The existing XMIT_RECURSION_LIMIT (8) in the no-qdisc path is not sufficient because tunnel recursion involves route lookups and full IP output, consuming much more stack per level. Use a lower limit of 4 (IP_TUNNEL_RECURSION_LIMIT) to prevent overflow. Add recursion detection using dev_xmit_recursion helpers directly in iptunnel_xmit() and ip6tunnel_xmit() to cover all IPv4/IPv6 tunnel paths including UDP encapsulated tunnels (VXLAN, Geneve, etc.). Move dev_xmit_recursion helpers from net/core/dev.h to public header include/linux/netdevice.h so they can be used by tunnel code. BUG: KASAN: stack-out-of-bounds in blake2s.constprop.0+0xe7/0x160 Write of size 32 at addr ffff88810033fed0 by task kworker/0:1/11 Workqueue: mld mld_ifc_work Call Trace: <TASK> __build_flow_key.constprop.0 (net/ipv4/route.c:515) ip_rt_update_pmtu (net/ipv4/route.c:1073) iptunnel_xmit (net/ipv4/ip_tunnel_core.c:84) ip_tunnel_xmit (net/ipv4/ip_tunnel.c:847) gre_tap_xmit (net/ipv4/ip_gre.c:779) dev_hard_start_xmit (net/core/dev.c:3887) sch_direct_xmit (net/sched/sch_generic.c:347) __dev_queue_xmit (net/core/dev.c:4802) bond_dev_queue_xmit (drivers/net/bonding/bond_main.c:312) bond_xmit_broadcast (drivers/net/bonding/bond_main.c:5279) bond_start_xmit (drivers/net/bonding/bond_main.c:5530) dev_hard_start_xmit (net/core/dev.c:3887) __dev_queue_xmit (net/core/dev.c:4841) ip_finish_output2 (net/ipv4/ip_output.c:237) ip_output (net/ipv4/ip_output.c:438) iptunnel_xmit (net/ipv4/ip_tunnel_core.c:86) gre_tap_xmit (net/ipv4/ip_gre.c:779) dev_hard_start_xmit (net/core/dev.c:3887) sch_direct_xmit (net/sched/sch_generic.c:347) __dev_queue_xmit (net/core/dev.c:4802) bond_dev_queue_xmit (drivers/net/bonding/bond_main.c:312) bond_xmit_broadcast (drivers/net/bonding/bond_main.c:5279) bond_start_xmit (drivers/net/bonding/bond_main.c:5530) dev_hard_start_xmit (net/core/dev.c:3887) __dev_queue_xmit (net/core/dev.c:4841) ip_finish_output2 (net/ipv4/ip_output.c:237) ip_output (net/ipv4/ip_output.c:438) iptunnel_xmit (net/ipv4/ip_tunnel_core.c:86) ip_tunnel_xmit (net/ipv4/ip_tunnel.c:847) gre_tap_xmit (net/ipv4/ip_gre.c:779) dev_hard_start_xmit (net/core/dev.c:3887) sch_direct_xmit (net/sched/sch_generic.c:347) __dev_queue_xmit (net/core/dev.c:4802) bond_dev_queue_xmit (drivers/net/bonding/bond_main.c:312) bond_xmit_broadcast (drivers/net/bonding/bond_main.c:5279) bond_start_xmit (drivers/net/bonding/bond_main.c:5530) dev_hard_start_xmit (net/core/dev.c:3887) __dev_queue_xmit (net/core/dev.c:4841) mld_sendpack mld_ifc_work process_one_work worker_thread </TASK> | ||||