Export limit exceeded: 395623 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 395623 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (395623 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-12954 | 2 Mapster, Wordpress | 2 Mapster Wp Maps, Wordpress | 2026-09-19 | 8.8 High |
| The Mapster WP Maps plugin for WordPress is vulnerable to Arbitrary User Meta Write in all versions up to, and including, 1.23.0 via the `my_profile_update()` function. This is due to the function performing no nonce verification, no capability check, and no allowlist validation on the meta key supplied via the `acf-photo-gallery-groups` POST parameter before passing both the meta key and its corresponding value directly to `update_user_meta()`. This makes it possible for authenticated attackers, with Subscriber-level access and above, to update arbitrary user meta values, though privilege escalation is not possible. | ||||
| CVE-2026-12739 | 2 Saadiqbal, Wordpress | 2 Wp Easy Pay – Payment And Donation Form Builder For Square, Wordpress | 2026-09-19 | 4.3 Medium |
| The WP Easy Pay – Payment and Donation form Builder for Square plugin for WordPress is vulnerable to authorization bypass in all versions up to, and including, 4.5.0. This is due to the plugin not properly verifying that a user is authorized to perform an action. This makes it possible for authenticated attackers, with subscriber-level access and above, to permanently delete arbitrary posts, pages, and custom post types (bypassing the trash via force deletion) or change any published post to draft status. | ||||
| CVE-2026-11727 | 1 Ibm | 1 Mq For Hpe Nonstop | 2026-09-19 | 8.1 High |
| IBM MQ for HPE NonStop 8.1.0 through 8.1.0.40 IBM MQ C client could allow a remote attacker to cause a denial of service or potentially execute arbitrary code due to improper validation of queue manager responses when requesting AMS policy data. | ||||
| CVE-2026-11726 | 1 Ibm | 1 Mq For Hpe Nonstop | 2026-09-19 | 8.1 High |
| IBM MQ for HPE NonStop 8.1.0 through 8.1.0.40 could allow an authenticated attacker to obtain sensitive information or cause a denial of service due to improper validation of message header offset values. | ||||
| CVE-2026-11722 | 1 Ibm | 1 Cics Tx Advanced | 2026-09-19 | 4.8 Medium |
| IBM WebSphere Application Server and WebSphere Application Server Liberty are affected by an HTTP request smuggling vulnerability. | ||||
| CVE-2026-11716 | 1 Ibm | 1 Mq For Hpe Nonstop | 2026-09-19 | 7.5 High |
| IBM MQ for HPE NonStop 8.1.0 through 8.1.0.40 could allow an authenticated attacker to cause a denial of service or potentially execute arbitrary code during queue manager startup due to improper validation of cluster migration data. | ||||
| CVE-2026-11711 | 1 Ibm | 1 Websphere Application Server | 2026-09-19 | 6.5 Medium |
| IBM WebSphere Application Server 9.0 and 8.5 is affected by a deserialization vulnerability in the Name Service component. | ||||
| CVE-2026-11710 | 1 Ibm | 1 Websphere Application Server | 2026-09-19 | 6.5 Medium |
| IBM WebSphere Application Server 8.5 is affected by an HTTP request smuggling vulnerability due to improper handling of Content-Length headers. | ||||
| CVE-2026-11548 | 1 Ibm | 1 Cics Tx Advanced | 2026-09-19 | 4.8 Medium |
| IBM WebSphere Application Server and WebSphere Application Server Liberty are affected by an HTTP request smuggling vulnerability. | ||||
| CVE-2026-11545 | 1 Ibm | 1 Websphere Application Server | 2026-09-19 | 3.7 Low |
| IBM WebSphere Application Server 8.5 and 9.0 could allow a remote attacker to obtain sensitive information from the administrative console due to missing authorization checks. | ||||
| CVE-2026-11540 | 1 Ibm | 1 Websphere Application Server | 2026-09-19 | 5.3 Medium |
| IBM WebSphere Application Server 9.0 and 8.5 could allow a remote attacker to obtain sensitive information about the file system through the FileTransfer servlet. | ||||
| CVE-2026-11539 | 1 Ibm | 1 Websphere Application Server | 2026-09-19 | 5.3 Medium |
| IBM WebSphere Application Server 9.0 and 8.5 is affected by an authentication bypass vulnerability in the SOAP/JMX connector. | ||||
| CVE-2026-11537 | 1 Ibm | 1 Websphere Application Server | 2026-09-19 | 4.3 Medium |
| IBM WebSphere Application Server 9.0, and 8.5 could allow a remote attacker to obtain sensitive information about the file system through the FileTransfer servlet. | ||||
| CVE-2025-36421 | 1 Ibm | 1 Controller | 2026-09-19 | 5.9 Medium |
| IBM Controller 11.0.0 through 11.0.1 FP7, and 11.1.0 through 11.1.3 FP1 transmits data in clear text that could allow an attacker to obtain sensitive information using man in the middle techniques. | ||||
| CVE-2025-1350 | 1 Ibm | 1 Controller | 2026-09-19 | 5.3 Medium |
| IBM Controller 11.0.0 through 11.0.1 FP7, and 11.1.0 through 11.1.3 FP1 could allow a remote attacker to obtain sensitive information when a detailed technical error message is returned in the browser. This information could be used in further attacks against the system. | ||||
| CVE-2024-56344 | 1 Ibm | 1 Cognos Analytics | 2026-09-19 | 5.9 Medium |
| IBM Cognos Analytics 12.0.4 through 12.0.4 FP2, and 12.1.0 through 12.1.3 FP1 could allow a remote attacker to obtain sensitive information, caused by the failure to properly enable HTTP Strict Transport Security. An attacker could exploit this vulnerability to obtain sensitive information using man in the middle techniques. | ||||
| CVE-2026-90242 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: iommu/vt-d: Fix iopf_refcount leak on RID domain replacement intel_iommu_attach_device() enables IOPF for the new domain but never disables it for the old one. device_block_translation(), called at the start of the function, tears down translation but does not touch any IOPF state; blocking_domain_attach_dev() has to call iopf_for_domain_remove() explicitly before invoking it for exactly this reason. identity_domain_attach_dev() has the same problem. Its comment claims that no PRI handling is needed because the device has been put in the blocking state, but the blocking state and the IOPF reference count are independent of each other. As a result, replacing a domain that has an iopf_handler with another domain at RID level leaks a reference in info->iopf_refcount. The count never drops back to zero, so iopf_queue_remove_device() is never called and iommu_disable_pci_pri() triggers its WARN_ON(info->iopf_refcount) when the device is released. The PASID paths already handle this correctly by way of iopf_for_domain_replace(); convert the two RID paths to do the same. Using the replace helper rather than a bare remove keeps the enable before the disable, so the reference count does not transiently reach zero and evict the device from the IOPF queue. | ||||
| CVE-2026-90244 | 1 Linux | 1 Linux Kernel | 2026-09-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: iommu/dma: Restore locking around msi_page_list Unlike a group's default domain, which is always freshly allocated and privately owned (iommu_group_alloc_default_domain()), VFIO type1's legacy container merges any newly attached group into an existing domain whenever their iommu_ops and cache-coherency enforcement match. iommu_dma_get_msi_page() only asserts the caller's own group mutex is held (iommu_group_mutex_assert()). On an IOMMU that publishes IOMMU_RESV_SW_MSI, e.g. ARM SMMU, a VM with two such devices assigned through the legacy container can have their guest drivers probe and allocate MSIs in parallel; each host-side VFIO_DEVICE_SET_IRQS lands on a different device fd and group mutex, but both devices' domains are the same merged domain, so both can enter iommu_dma_get_msi_page() concurrently and corrupt msi_page_list. commit 288683c92b1a ("iommu: Make iommu_dma_prepare_msi() into a generic operation") dropped the prior msi_prepare_lock on the reasoning that "each iommu_domain is unique to a group," which holds for default domains but not this VFIO type1 case. Restore the static lock, since it's only guarding a corner case and will likely never be contended. iommufd avoids the equivalent problem by having its own callers (iommufd_sw_map_msi()) take a ctx-wide sw_msi_lock before ever reaching the shared list. VFIO type1 can't mirror that since it dispatches to iommu_dma_sw_msi() which is outside VFIO's jurisdiction. | ||||
| CVE-2026-90245 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: fbdev: kyro: Validate overlay viewport coordinates The overlay viewport end coordinates are computed from the viewport origin and dimensions using 32-bit unsigned arithmetic. Large input values can cause these calculations to wrap around before the resulting coordinates are passed to SetOverlayViewPort(). SetOverlayViewPort() packs the viewport coordinates into 16-bit register fields. The X coordinates are additionally adjusted by +2 and +1 before being written. Validate the coordinate calculations for 32-bit wraparound and ensure that the adjusted coordinates fit within their 16-bit register fields before calling SetOverlayViewPort(). Found by Linux Verification Center (linuxtesting.org) with SVACE. | ||||
| CVE-2026-90248 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net/sched: cls_api: fix teardown of an adopted proto on insert-race loss In tc_new_tfilter() the create branch sets tp_created = 1 before calling tcf_chain_tp_insert_unique(). When the caller loses the race (another request inserted a proto at the same chain/prio first), insert_unique() destroys the caller's own tp_new and returns the winner's proto with an extra reference. tp_created was never cleared, so the loser's errout path treated the winner's live proto as its own and called tcf_chain_tp_delete_empty() on it, silently unlinking an active classifier that the winning request already advertised via RTM_NEWTFILTER. Track the outcome of the insert step in a single tri-state variable so each errout path reacts correctly: - TP_NOT_CREATED: no proto created; pursue the old path. - TP_CREATED: proto inserted successfully; same code path as before. - TP_NOT_OWNED: New - lost the insert race; tp is another request's proto (chain ref already released by tp_new's destroy) Both errout reactions are single expressions derived from the state. This fix is motivated by the Sashiko's automated review of Patch (net/sched: cls_api: Always acquire rtnl_lock when destroying locked classifiers) [1][2]. The review identified the silent-unlink behaviour of an adopted proto's teardown when a request loses the tcf_chain_tp_insert_unique() race. [1] https://sashiko.dev/#/patchset/20260801125632.360365-1-jhs%40mojatatu.com [2] https://netdev-ai.bots.linux.dev/sashiko/#/patchset/20260801125632.360365-1-jhs%40mojatatu.com | ||||