Export limit exceeded: 396016 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 24353 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (24353 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-89773 | 1 Linux | 1 Linux Kernel | 2026-09-11 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Skip Update HDCP Config In Transition State Transition state does not have a valid dm_stream_ctx that should skip configuring HDCP routine. The routine is valid to go through only when a valid stream is created. | ||||
| CVE-2026-89772 | 1 Linux | 1 Linux Kernel | 2026-09-11 | 6.3 Medium |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: write-protect folios during data writeback commit 095be159f3eb ("btrfs: unify folio dirty flag clearing") replaced the folio_clear_dirty_for_io() call in extent_write_cache_pages() with a plain folio_test_dirty() check. Besides clearing the dirty flag, folio_clear_dirty_for_io() also calls folio_mkclean(), which write-protects the shared mmap PTEs mapping the folio. Note that we still do call folio_clear_dirty_for_io() later in submit_one_sector() when we clear dirty on the last sector of the folio (the only sector for non-subpage cases). But we lost this early call in extent_write_cache_pages(). Without the extra write-protection, a process with the file mmap-ed can modify a sector while it is being used by writeback in a way that expects a stable folio (checksumming, compressing, copying, etc...) without faulting, which manifests as a handful of concrete bugs. 1. For large folios or subpage sectorsize, it is possible to submit a bio which does not cover the whole folio. When this happens, we will have a bio in flight for a folio that we have *not* called folio_clear_dirty_for_io() on. If a task with an existing mmap-ed PTE writes (without faulting..) in this window, it can result in corruptions. If the write arrives while the checksumming or writing itself is underway, this can result in an invalid checksum and later corruption reports on read. If the write arrives after checksumming/writing is done but before the last sector dirty is cleared, then the write is present in page cache but doesn't affect the dirty tracking and will be lost when the folio is fully finished being submitted and the dirty bit is cleared. This results in losing the write even if fsync() is called. 2. For zoned submissions which are done in batch separate from the main extent_writepage() loop, we also risk csum violations for those submissions. Zoned writes are clamped to max_zone_append_size and are not aligned with folios, so a submission can span two folios. The first folio being processed in extent_write_cache_pages() will call extent_write_locked_range() which will submit the partial range of the next folio, while the rest of that folio could still be dirty. So clearing dirty on the submitted sectors doesn't call folio_clear_dirty_for_io() and we have the same issue. Since extent_write_cache_pages() skips these batch submitted folios (they are already marked for writeback from submission by the preceding folio), we must add the extra write protection in lock_delalloc_folios(). 3. For inline extents this will subtly risk losing writes that happen after/while we copy the inline extent but before we clear dirty on the folio. 4. For folios spanning EOF, mmap could tamper with the zeroed bytes past EOF and cause them to be persisted where future faults would improperly see them instead of zeros. 5. Finally, for compressed extents, we risk modifying the folios while we work on compressing them which will result in corrupted compressed data. Specifically, in run_delalloc_compressed() we queue up work to do compress_file_range() in BTRFS_COMPRESSION_CHUNK_SIZE (512K) chunks which will call btrfs_folio_clamp_clear_dirty() on the range. For non-subpage, this will always clear the whole folio, safely. For subpage, we risk a partial clear here as well. In particular, imagine a 2M folio broken up into 512K chunks of work which might start compression work on one chunk before all the chunks compress_file_range() workers have gotten far enough to finish clearing all the dirty bitmaps of the folio and getting to folio_clear_dirty_for_io(). Large folios on the edges of submission ranges are similarly at risk to be only partly cleared. This particular gap was introduced by a second patch in the same series: commit a4ef54dbb576 ("btrfs: make extent_range_clear_dirty_for_io() to handle sector size < page size cases") We cannot simply restore the call to folio_clear ---truncated--- | ||||
| CVE-2026-89768 | 1 Linux | 1 Linux Kernel | 2026-09-11 | 2.3 Low |
| In the Linux kernel, the following vulnerability has been resolved: fs: fix user path of nested backing files backing_file_open() derives the path to be stored in the new backing file from user_file->f_path. This is incorrect when user_file itself is a backing file, which is the case for nested stacking filesystems, e.g. overlayfs mounts where the lowerdir of one overlayfs is the merged directory of another. Since commit def3ae83da02 ("fs: store real path instead of fake path in backing file f_path") the f_path of a backing file holds the real path of the intermediate layer, not the path that the user opened. Commit 924577e4f6ca ("ovl: Fix nested backing file paths") fixed this for such configurations by passing file_user_path() from ovl_open_realfile(). However, commit 6af36aeb147a ("lsm: add backing_file LSM hooks") changed the first argument of backing_file_open() from the user path back to the user file and derived the path from user_file->f_path again, silently re-introducing the problem. As a result, files mapped through a nested overlayfs show the wrong path in /proc/<pid>/maps and in perf/ftrace mmap records. For example, with two nested overlayfs mounts: mkdir -p /ovl/{lower,upper,work,merged} /ovl/nested echo hello > /ovl/lower/foo mount -t overlay overlay \ -o lowerdir=/ovl/lower,upperdir=/ovl/upper,workdir=/ovl/work \ /ovl/merged # at least two lowerdirs are needed when upperdir is nonexistent mount -t overlay overlay \ -o lowerdir=/ovl/merged:/ovl/lower /ovl/nested mapping /ovl/nested/foo shows a disconnected path instead of the user path: # readlink /proc/self/fd/3 /ovl/nested/foo # grep foo /proc/self/maps 7f6e2c100000-7f6e2c101000 r--s 00000000 00:24 15813027 /foo The bogus path is derived from the f_path of the intermediate backing file, whose mount is a private clone that d_path() cannot resolve. Fix this by using file_user_path(), which returns the outermost user-visible path for backing files and falls back to &user_file->f_path for regular files. This restores the behavior of commit 924577e4f6ca ("ovl: Fix nested backing file paths") for overlayfs and also fixes the same problem for the other backing_file_open() callers, fuse passthrough and erofs ishare, when their user file is itself a backing file. backing_tmpfile_open() has the same pattern but is not affected: it is only called by ovl_create_tmpfile() for the upper layer, and another overlayfs is rejected as upperdir by the DCACHE_OP_REAL check in ovl_mount_dir_check(), so its user_file can never be a backing file. | ||||
| CVE-2026-89766 | 1 Linux | 1 Linux Kernel | 2026-09-11 | 2.5 Low |
| In the Linux kernel, the following vulnerability has been resolved: pidfd: hold exec_update_lock around namespace ioctl The PIDFD_GET_*_NAMESPACE ioctls in pidfd_ioctl() perform a filesystem credentials ptrace access check before handing out a namespace file descriptor. The accompanying comment states that the code "mirrors nsfs behavior", but, unlike the corresponding procfs paths, it does so without holding the target task's exec_update_lock. proc_ns_get_link() and proc_ns_readlink() both take exec_update_lock for reading around the ptrace check and the namespace lookup, so that the credentials used for the access decision match those of the task when its namespace is read. Without it, a caller can pass the check against the target's old credentials and then read the namespace after the target has execve()'d a setuid binary and committed new credentials -- accessing namespace information it should have been denied. Hold exec_update_lock for reading around the ptrace check and the namespace lookup so that pidfd truly mirrors nsfs behavior, as the comment already claims. open_namespace() itself runs outside the lock: once a namespace reference is obtained it carries its own refcount and is opened with the caller's own credentials, so a concurrent execve() on the target can no longer affect the outcome. | ||||
| CVE-2026-89757 | 1 Linux | 1 Linux Kernel | 2026-09-11 | 5.3 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mm/mglru: fix and remove redundant unevictable folio handling sort_folio() has a shortcut for moving folios that are no longer evictable but are still sitting on a generation list. However, this shortcut is buggy. It does not follow the PG_lru usage convention, and it has a more serious issue. Unevictable folios are not threaded on lists[LRU_UNEVICTABLE], so that folio->lru can be reused to hold folio->mlock_count (see the comment in lruvec_init()). Hence lruvec_add_folio() skips the list_add() for them, and every other place that turns a folio unevictable initialises mlock_count explicitly: lru_add() sets it to 0, __mlock_folio() and __mlock_new_folio() set it to !!folio_test_mlocked(folio). sort_folio() sets nothing, and the lru_gen_del_folio() right above it may have already poisoned folio->lru via list_del(), so mlock_count ends up aliasing LIST_POISON2, which reads as 0x122, i.e. 290. The result is user visible. On munlock, __munlock_folio() decrements that bogus count, finds it still non-zero and bails out before clearing PG_mlocked, so the folio remains unevictable and the Mlocked accounting stays inflated until the folio is freed. The shortcut also touches the LRU flags in the wrong order. It calls lru_gen_del_folio() while PG_lru is still set, so a concurrent folio_test_clear_lru() (e.g. compaction, folio_isolate_lru()) can succeed on a folio that has already been taken off the generation list, which may lead to unexpected behavior. So fix it by isolating them as common folios and letting the generic shrink path cull them. This matches the classical LRU behavior, and there should be no visible effect on the generic eviction or isolation behavior. There is no performance concern either, such a folio goes through this once, and then it is off the generation lists for good. | ||||
| CVE-2026-89737 | 1 Linux | 1 Linux Kernel | 2026-09-11 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: usb: typec: thunderbolt: Disable work before freeing tbt on remove tbt_altmode_remove() drops the plug and cable references without draining tbt->work. The work function dereferences those references, and can also requeue itself in its error path. The VDM callbacks can queue the same work item. Disable and drain tbt->work before dropping the references. This waits for an existing invocation and prevents subsequent schedule_work() calls from queueing it during teardown. This issue was found by an in-house static analysis tool and confirmed by manual code review. | ||||
| CVE-2026-89722 | 1 Linux | 1 Linux Kernel | 2026-09-11 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: PCI/sysfs: Fix out-of-bounds read in pci_write_legacy_io() pci_write_legacy_io() loads 4 bytes from the kernfs write buffer regardless of how many bytes userspace wrote: if (count != 1 && count != 2 && count != 4) return -EINVAL; return pci_legacy_write(bus, off, *(u32 *)buf, count); kernfs_fop_write_iter() allocates the buffer with kmalloc(len + 1), so a 1-byte write to the legacy_io sysfs file allocates 2 bytes and the unconditional u32 load reads up to 2 bytes past the end of the allocation, which KASAN reports as a slab-out-of-bounds read. Similarly, a 2-byte write overreads by 1 byte. Thus, read only the number of bytes requested using get_unaligned_le16() and get_unaligned_le32() for the 2 and 4 byte cases, interpreting the buffer as little-endian to match the byte ordering of PCI I/O port space. The PowerPC implementation previously compensated for the generic code's native-endian 32-bit load by shifting the value into place for the 1 and 2 byte cases. The shifts were only correct on big-endian kernels. On little-endian PowerPC (POWER8 and later), they extracted the wrong bytes, so a 1-byte write wrote an out-of-bounds byte instead of the requested value. On big-endian, the native load also caused out_le16() and out_le32() to reverse the user's bytes on the wire for 2 and 4 byte writes. The little-endian helpers resolve both issues, so the shifts are removed. No changes are needed for the Alpha platform. The legacy_io file is root-only and exists only on Alpha and PowerPC, the two architectures that define HAVE_PCI_LEGACY. | ||||
| CVE-2026-89721 | 1 Linux | 1 Linux Kernel | 2026-09-11 | 4.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: phy: rockchip-samsung-dcphy: fix out-of-range max_register The PHY register block is 64KB, so with a register stride of 4 the last accessible register sits at offset 0xfffc. max_register names 0x10000, one register past the end of the mapping: dumping the registers through the regmap debugfs interface reads beyond the ioremapped region and oopses on the unmapped page. The oops fires with the regmap lock held, so later PHY operations deadlock. | ||||
| CVE-2026-89714 | 1 Linux | 1 Linux Kernel | 2026-09-11 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: NFS: fix delegation_hash_table leak when nfs4_server_common_setup() fails nfs4_server_common_setup() allocates server->delegation_hash_table first, but server->destroy - the only path that frees the table via nfs4_destroy_server() - is not assigned until the very end of the function. If any intermediate step fails (the is_ds_only_client() check, nfs4_init_session(), nfs4_get_rootfh(), or nfs_probe_server()), the function returns with server->destroy still NULL, so the caller's nfs_free_server() skips the destroy callback and the hash table is leaked (4 KiB per attempt with the default delegation watermark). This is trivially reachable from userspace: every failed NFSv4 mount leaks one allocation. A client that persistently retries a mount that cannot succeed leaks kernel memory without bound. Observed in production where a Longhorn backup poller retried mount.nfs4 against an NFSv3-only server roughly 10 times per second, leaking ~3.4 GiB of unreclaimable slab (kmalloc-rnd-13-4k) per day; the node accumulated 12 GiB of leaked slab before the source was identified via the kmem:kmalloc tracepoint (call_site=nfs4_delegation_hash_alloc). Reproducer: # server exports NFSv3 only (or export path absent for v4) while :; do mount -t nfs4 <server>:/missing /mnt; done # watch SUnreclaim in /proc/meminfo grow 4 KiB per iteration Free the table on the error paths between the allocation and the assignment of server->destroy. | ||||
| CVE-2026-89701 | 1 Linux | 1 Linux Kernel | 2026-09-11 | 6.8 Medium |
| In the Linux kernel, the following vulnerability has been resolved: nfsd: validate nseconds in TIME_DELEG decode paths The xdrgen-based TIME_DELEG_ACCESS and TIME_DELEG_MODIFY decode arms store a raw uint32_t nseconds directly into tv_nsec without enforcing nseconds < NSEC_PER_SEC. The legacy nfsd4_decode_nfstime4 has this check but the TIME_DELEG paths do not. A malformed timespec can propagate through notify_change() to disk. Add range checks in both nfs4xdr.c (SETATTR path) and nfs4callback.c (CB_GETATTR path). | ||||
| CVE-2026-89683 | 1 Linux | 1 Linux Kernel | 2026-09-11 | 5.9 Medium |
| In the Linux kernel, the following vulnerability has been resolved: nfsd: fix dentry ref leak on V4ROOT export filehandle lookup nfsd_set_fh_dentry() leaks the dentry reference from exportfs_decode_fh_raw() when the NFS3_FHSIZE or NFS_FHSIZE switch cases detect NFSEXP_V4ROOT and goto out. The out: label calls exp_put() but never dput(dentry), and fhp->fh_dentry was never assigned so fh_put() cannot compensate. A crafted NFSv3 filehandle targeting a V4ROOT export's fsid triggers the leak on every request. | ||||
| CVE-2026-89661 | 1 Linux | 1 Linux Kernel | 2026-09-11 | 4.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: NFSD: Prevent post-shutdown use-after-free in unlock_filesystem Writing a filesystem path to /proc/fs/nfsd/unlock_filesystem runs nfsd4_cancel_copy_by_sb() before nfsd_mutex is held and before the handler confirms that nn->nfsd_serv is set. Once nfsd has shut down, nfs4_state_destroy_net() has freed nn->conf_id_hashtbl but left the pointer intact, so the cancel helper iterates freed slab memory as an array of struct list_head and then dereferences a bogus nfs4_client when it takes clp->async_lock. A local administrator holding CAP_SYS_ADMIN can reach this use-after-free by stopping the server and then writing to unlock_filesystem; KASAN reports a slab-use-after-free read in nfsd4_cancel_copy_by_sb(). nfsd4_revoke_states() walks the same state tables and for that reason already runs only under nfsd_mutex with nn->nfsd_serv confirmed present. Move the async COPY cancel into that protected section so every NFSv4 state-table walker on this path observes a running server. Async copies exist only while the server runs, so gating the cancel on nn->nfsd_serv loses nothing. | ||||
| CVE-2026-89645 | 1 Linux | 1 Linux Kernel | 2026-09-11 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: drop recovered reloc root refs on recovery failure During relocation recovery, each fs root gets a reference to its relocation root. If loading or adding a later root fails, or if the first transaction commit fails, btrfs_recover_relocation() jumps to out_unset before merge_reloc_roots() and clean_dirty_subvols(). put_reloc_control() drops the list-owned relocation root references, but it does not clear fs_root->reloc_root or drop the references owned by those pointers. Mount cleanup only drops them when BTRFS_FS_ERROR is set, so an error such as -ENOMEM while processing a later root can leave references behind. Keep temporary references to the fs roots associated during recovery. On failure, clear their reloc_root pointers and drop the corresponding references. Once the first transaction commit succeeds, drop only the temporary fs root references and let the normal merge and cleanup paths handle the relocation roots. Fault injection on a pending-relocation image confirmed the cleanup gap. With an injected first-commit failure, 25 fs roots had reloc_root set with fs_error=0. With this fix, the same failure path drops that count to 0 before mount fails. | ||||
| CVE-2026-89642 | 1 Linux | 1 Linux Kernel | 2026-09-11 | 6.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: cifs: call pagecache_isize_extended() in cifs_setsize() when extending cifs_setsize() calls truncate_pagecache() but skips pagecache_isize_extended() on extension. truncate_setsize() shows the correct pattern: i_size_write(inode, newsize); if (newsize > oldsize) pagecache_isize_extended(inode, oldsize, newsize); truncate_pagecache(inode, newsize); pagecache_isize_extended() zeroes the tail of the page straddling old EOF. Without it, dirty bytes in that region can be written back to the server, exposing stale data in the newly extended range. | ||||
| CVE-2026-89592 | 1 Linux | 1 Linux Kernel | 2026-09-11 | 6.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: accel/rocket: fix NULL dereference and integer overflow in rocket_job_push() rocket_job_push() allocates a temporary array to hold all input and output GEM object pointers: bos = kvmalloc_array(job->in_bo_count + job->out_bo_count, sizeof(void *), GFP_KERNEL); memcpy(bos, job->in_bos, job->in_bo_count * sizeof(void *)); memcpy(&bos[job->in_bo_count], job->out_bos, ...); Two bugs exist: 1. Missing NULL check: if kvmalloc_array() fails, bos is NULL and the subsequent memcpy() dereferences it, causing a kernel NULL pointer dereference. 2. Integer overflow: in_bo_count and out_bo_count are both u32, set directly from userspace-supplied in_bo_handle_count and out_bo_handle_count with no prior validation. Their sum is computed in u32 arithmetic and can wrap to a smaller value, causing the allocation count passed to kvmalloc_array() to be smaller than intended. Subsequent uses still operate on the original counts when copying and locking objects, which may lead to out-of-bounds accesses on the temporary array. Fix by using check_add_overflow() to detect count overflow before the allocation, and adding a NULL check on the allocation result. | ||||
| CVE-2026-89591 | 1 Linux | 1 Linux Kernel | 2026-09-11 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: accel/rocket: initialize job domain before cleanup paths rocket_ioctl_submit_job() releases rjob through rocket_job_put() on allocation error paths. rocket_job_cleanup() unconditionally calls rocket_iommu_domain_put(job->domain), but job->domain is assigned only after task copying and BO lookups. A failure before that assignment can therefore clean up a job with a NULL domain pointer. Take the per-file domain reference before the first error path can release rjob. Also clear rjob->tasks after freeing it in rocket_copy_tasks(), so the common cleanup path cannot free the task array again after a task-copy error. | ||||
| CVE-2026-89590 | 1 Linux | 1 Linux Kernel | 2026-09-11 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: accel/rocket: Fix error path handling in rocket_job_run() In rocket_job_run(), after taking an extra fence reference for job->done_fence via dma_fence_get(), the error paths have three bugs: - The dma_fence reference held by job->done_fence is never released, causing a reference leak. - pm_runtime_get_sync() increments the usage counter even on failure, but the error path does not decrement it, leaking the runtime PM reference and preventing the NPU from suspending. - A valid but unsignaled fence is returned to the DRM scheduler, which triggers WARN("Fence ... released with pending signals!") when the scheduler drops its reference. Fix by replacing pm_runtime_get_sync() with pm_runtime_resume_and_get() which auto-balances the usage counter on failure, releasing both fence references on error, and returning ERR_PTR(ret) instead of the unsignaled fence. [tomeu: Refactored error paths to use consolidated goto labels] | ||||
| CVE-2026-89578 | 1 Linux | 1 Linux Kernel | 2026-09-11 | 4.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: dm-io: clone the source bio instead of copying its biovec For DM_IO_BIO requests, do_region() built each destination bio by walking the source bio's biovec and re-adding the pages one at a time, tracking the remaining transfer in sectors. The vector lengths are byte granular and need not be sector aligned (e.g. a misaligned O_DIRECT buffer split across pages), so the sector-based accounting could lose a sub-sector fragment: to_sector() truncated the remainder and the outer loop spun forever submitting empty bios, hanging the I/O. There is no need to rebuild the biovec at all. The destination reads into (or writes from) exactly the same pages as the source bio, so the bio can simply clone the source's biovec with bio_alloc_clone() and remap it to the target device. The clone inherits the source's iterator and alignment, and the block layer splits it to the target's limits on submission, so the whole region maps to a single cloned bio with no manual page copying or sector accounting. This removes the per-page copy path (and its open-coded bvec dpages helpers) for bio-backed I/O and fixes the hang on misaligned direct I/O to a dm-mirror device. Page-list, vma and kmem sources keep the existing copy path. | ||||
| CVE-2026-89568 | 1 Linux | 1 Linux Kernel | 2026-09-11 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: kho: fix size calculation in kho_preserved_memory_reserve() kho_preserved_memory_reserve() calculates the size of a preservation by doing 1 << (order + PAGE_SHIFT). Since the '1' is a 32-bit integer, it can only be shifted by 31. That is, it will only work for preservations up to 2 GiB. Larger preservations will trigger undefined behaviour. While preservations larger than 2 GiB can't be obtained via folios currently, they can be obtained via kho_preserve_pages(). For example, memblock reserve_mem uses kho_preserve_pages(). Reservations larger than 2 GiB are valid and will trigger this bug if properly aligned. Fix it by using 1UL for shifting. | ||||
| CVE-2026-89567 | 1 Linux | 1 Linux Kernel | 2026-09-11 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: jbd2: bound shrinker scans by examined checkpoint buffers The jbd2 shrinker currently accounts only checkpoint buffers that it successfully releases against nr_to_scan. Busy buffers therefore do not consume the scan budget. If a checkpoint transaction contains mostly busy buffers, the shrinker can scan its entire checkpoint list while holding journal->j_list_lock. Large checkpoint lists can result in excessive lock hold times and leave other CPUs spinning on j_list_lock, causing soft lockups or RCU stalls. Pass nr_to_scan into journal_shrink_one_cp_list() and decrement it for every buffer examined, including busy buffers. Pass NULL from checkpoint cleanup paths so their existing full-list behavior is preserved. This restores the scan-budget semantics that existed before journal_shrink_one_cp_list() was changed to always scan a complete checkpoint list. | ||||