Export limit exceeded: 24353 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (24353 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-80947 | 1 Linux | 1 Linux Kernel | 2026-09-13 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: rtl8xxxu: fix use-after-free from rx_urb_wq on stop rtl8xxxu arms rx_urb_wq from the RX completion path: rtl8xxxu_rx_complete() hands the URB to rtl8xxxu_queue_rx_urb(), which queues it on rx_urb_pending_list and, once the list grows past RTL8XXXU_RX_URB_PENDING_WATER, schedules rx_urb_wq. The worker rtl8xxxu_rx_urb_work() drains rx_urb_pending_list, recovers priv through container_of, and resubmits each URB through rtl8xxxu_submit_rx_urb(), which anchors it on rx_anchor and dereferences priv->udev. rtl8xxxu_stop() cancels the sibling work items (c2hcmd_work, ra_watchdog, update_beacon_work) but never cancels rx_urb_wq, so a worker armed during the last burst of RX traffic can run rtl8xxxu_rx_urb_work() after rtl8xxxu_disconnect() has called ieee80211_free_hw(), which frees priv, producing a use-after-free. The window opens under active RX traffic (pending count above the watermark) followed by a disconnect. There are two teardown races to close: * rtl8xxxu_queue_rx_urb() decided whether to enqueue under rx_urb_lock but called schedule_work() after dropping the lock. A completion that observed shutdown == false and released the lock could then call schedule_work() after rtl8xxxu_stop() had set shutdown and cancel_work_sync() had already returned, arming the worker to run after the teardown. Move schedule_work() under the same !shutdown branch so the arming decision is atomic with the shutdown check. * rtl8xxxu_rx_urb_work() anchors every URB it drained back onto rx_anchor through rtl8xxxu_submit_rx_urb(). A worker still running when usb_kill_anchored_urbs(&priv->rx_anchor) returned would submit a URB that escaped the kill. In rtl8xxxu_stop(), call cancel_work_sync(&priv->rx_urb_wq) before the kill so the worker is drained first. After priv->shutdown is set under rx_urb_lock, completions can no longer queue rx_urb_wq. cancel_work_sync() then drains the last queued or running worker, and the following usb_kill_anchored_urbs() kills the URBs it may have submitted. rtl8xxxu_disconnect() is covered because ieee80211_unregister_hw() guarantees .stop() runs for a live interface before ieee80211_free_hw() frees priv. The probe error path needs no cancel: rx_urb_wq is INIT_WORK()'d there but cannot have been scheduled, since no URB is submitted before ieee80211_register_hw() succeeds. This bug was found by static analysis. | ||||
| CVE-2026-80943 | 1 Linux | 1 Linux Kernel | 2026-09-13 | 7.6 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: rtlwifi: rtl8192du: check QoS TID before indexing tids rtl92du_tx_fill_desc() uses ieee80211_get_tid() to read the QoS TID from the 802.11 header and then uses it as an index into sta_entry->tids[]. ieee80211_get_tid() returns the low 4-bit QoS TID value, so the result can be in the range 0..15. rtlwifi only allocates MAX_TID_COUNT entries for sta_entry->tids[], and MAX_TID_COUNT is 9. A QoS TID greater than 8 therefore indexes past the aggregation state array. Keep the default RTL_AGG_STOP state for out-of-range TIDs, matching rtl92cu_tx_fill_desc(). This issue was detected by our static analysis tool and confirmed by manual audit. UBSAN validation for the same bug pattern reports an array-index-out-of-bounds access with index 10 for type 'rtl_tid_data [9]'. | ||||
| CVE-2026-80937 | 1 Linux | 1 Linux Kernel | 2026-09-13 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7915: bound the device EEPROM address before the EFUSE copy mt7915_mcu_get_eeprom() copies a fixed EFUSE block into the driver's dev->mt76.eeprom.data buffer at the offset reported by the MCU response (res->addr, a device-controlled __le32) without checking it against the buffer size. A malicious or malfunctioning device can report an arbitrary address and drive a 16-byte out-of-bounds write past eeprom.data. Reject a response whose address would place the copy outside eeprom.data before deriving the destination pointer. Devices that echo the requested in-bounds offset are unaffected. | ||||
| CVE-2026-80936 | 1 Linux | 1 Linux Kernel | 2026-09-13 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7925: cancel mlo_pm_work on stop mt7925 queues mlo_pm_work with a 5 second delay during multi-link power-save setup and never cancels it on the stop path. If the device is torn down inside that window, the work outlives the teardown and its timer fires afterwards, trying to queue onto the workqueue that is already gone: workqueue: cannot queue mt7925_mlo_pm_work [mt7925_common] on wq phy0 WARNING: kernel/workqueue.c:2283 at __queue_work+0x59/0xa0, CPU#1: swapper/1/0 call_timer_fn+0x2a/0x140 __run_timers+0x203/0x330 run_timer_softirq+0x86/0xf0 mt7921 already has its own stop callback, so add one for mt7925 that cancels the work before calling mt792x_stop(). mt7925_ops backs both the PCIe and USB drivers, so this covers both. | ||||
| CVE-2026-80929 | 1 Linux | 1 Linux Kernel | 2026-09-13 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: sysctl: move the "cad_pid" entry from pid_table[] to kern_reboot_table[] cad_pid is global, and kill_cad_pid() is only used in the root namespace. However, due to pid_table_root_permissions(), a non-root user can unshare pid/user namespaces and modify it from the child namespace. This makes no sense and is simply wrong. Move it to kern_reboot_table[] where it logically belongs; this ensures that only GLOBAL_ROOT_UID can read/modify this sysctl. Note that this patch doesn't preserve "#ifdef CONFIG_PROC_SYSCTL" around the "cad_pid"; CONFIG_PROC_SYSCTL selects CONFIG_SYSCTL, so it is always set when kern_reboot_table[] is compiled. | ||||
| CVE-2026-89531 | 1 Linux | 1 Linux Kernel | 2026-09-12 | 5.9 Medium |
| In the Linux kernel, the following vulnerability has been resolved: svcrdma: Reject connection when transport allocation fails handle_connect_req() returns without action when svc_rdma_create_xprt() fails to allocate the new transport. The CM core returns 0 for CONNECT_REQUEST events, so it does not destroy the new rdma_cm_id. Each allocation failure under memory pressure leaks one rdma_cm_id, and a remote peer driving connection attempts can amplify this. Reject the connection by returning a non-zero status from the CM event handler, which tells the CM core to destroy the orphaned cm_id. | ||||
| CVE-2026-89629 | 1 Linux | 1 Linux Kernel | 2026-09-12 | 5.3 Medium |
| In the Linux kernel, the following vulnerability has been resolved: HID: corsair-void: Check size of status and firmware events before reading them Malformed status and firmware events could cause an out-of-bounds read since the size wasn't being checked. Check the size and warn on unexpected values to avoid this. | ||||
| CVE-2026-89740 | 1 Linux | 1 Linux Kernel | 2026-09-12 | 6.3 Medium |
| In the Linux kernel, the following vulnerability has been resolved: serial: imx: serialize imx_uart_ports[] lifetime imx_uart_probe() publishes its devm-allocated port in imx_uart_ports[] before uart_add_one_port() because console setup uses the table. The entry is not cleared when adding the port fails or after removal, leaving a dangling pointer. A sibling probe can register the shared console through that stale entry. This was reproduced under KASAN on QEMU mcimx6ul-evk by unbinding a sibling UART, unbinding the console UART and rebinding the sibling. Keep the entry valid through uart_remove_one_port(), then clear it. Protect port addition and removal together with their table updates so sibling operations cannot interleave. Reject an occupied slot rather than clobbering an active port during a duplicate-line probe. | ||||
| CVE-2026-89666 | 1 Linux | 1 Linux Kernel | 2026-09-12 | 6.8 Medium |
| In the Linux kernel, the following vulnerability has been resolved: nfsd: reject out-of-range nseconds in NFSv3 SETATTR and create ops A client can send an NFSv3 SETATTR, CREATE, MKDIR, SYMLINK or MKNOD carrying an atime or mtime whose nseconds field is out of range. The value is well-formed on the wire and decodes cleanly into a valid uint32, but it is not a valid timespec64: tv_nsec must be less than NSEC_PER_SEC. Nothing in the setattr path clamps it. notify_change() runs the time through timestamp_truncate(), which does not reduce tv_nsec below NSEC_PER_SEC when the filesystem supports nanosecond granularity (s_time_gran == 1), and the inode atime/mtime setters store it verbatim (only ctime is normalized, via inode_set_ctime_to_ts()). The un-normalized value then corrupts on-disk metadata: ext4's ext4_encode_extra_time() shifts tv_nsec left by EXT4_EPOCH_BITS, which overflows the 32-bit extra field and clobbers the seconds-epoch bits, so the stored seconds (and thus the year) are wrong on read-back. XFS with bigtime mis-stores the timestamp for the same reason. Validate the client-supplied atime/mtime in the proc handlers and return NFS3ERR_INVAL before anything is changed. RFC 1813 lists NFS3ERR_INVAL for SETATTR and describes it as the error for a value the server 'can not store ... in its own representation'; the client maps it to EINVAL. Checking in the proc handlers, rather than in nfsd_setattr(), keeps the rejection in front of object creation. The create operations create the object before nfsd_create_setattr() runs, so a late failure would leave the new object behind and turn a non-idempotent request into a namespace change that reports failure. The check is therefore done up front, for the create operations before the object is created. tv_nsec is a long, so the comparison casts it to unsigned long (the same width) rather than to u32, matching timespec64_valid(). A u32 cast would truncate on 64-bit; the unsigned long cast also rejects a value that became negative when an out-of-range u32 wire nseconds was assigned to a 32-bit long. Only client-supplied times are checked: SET_TO_SERVER_TIME requests carry no client value. The sattrguard3 ctime is deliberately left alone: an out-of-range guard simply never matches the object's ctime and yields NFS3ERR_NOT_SYNC via the existing guardtime comparison, which is the protocol-correct outcome rather than rejecting the request. | ||||
| CVE-2026-89745 | 1 Linux | 1 Linux Kernel | 2026-09-12 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: debugfs: Fix lockdown check for mmap_prepare Commit 651fdda8406d ("relay: update relay to use mmap_prepare") changed the `mmap` file operation to `mmap_prepare` for relayfs, but the lockdown check in debugfs was not updated accordingly. This prevents debugfs from being locked down when the kernel is in integrity mode if a file uses `mmap_prepare` but not `mmap`. Since the conversion to `mmap_prepare` across the kernel is not yet complete, update the lockdown check to look for both `mmap` and `mmap_prepare` to ensure comprehensive coverage. | ||||
| CVE-2026-89759 | 1 Linux | 1 Linux Kernel | 2026-09-12 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mm/kmemleak: avoid soft lockup when scanning task stacks Patch series "mm/kmemleak: avoid soft lockup when scanning task", v3. kmemleak_scan() scans every task stack under one rcu_read_lock() with no reschedule point, which can trip the soft lockup watchdog on hosts with very many threads. That prints the following message, depending on the workload+host configuration: watchdog: BUG: soft lockup - CPU#35 stuck for 22s! [kmemleak:537] scan_block kmemleak_scan kmemleak_scan_thread kthread Patch 1 walks the tasks with find_ge_pid() so the scan reschedules between tasks Patches 2-3 let the scan loops stop early once a scan is interrupted. This patch (of 3): kmemleak_scan() walks every thread and scans its kernel stack under a single rcu_read_lock() with no reschedule point. On a host with very many threads -- amplified by KASAN/lockdep in debug builds -- this loop can hog a CPU long enough to trip the soft lockup watchdog: watchdog: BUG: soft lockup - CPU#35 stuck for 22s! [kmemleak:537] scan_block kmemleak_scan kmemleak_scan_thread kthread A cond_resched() cannot be added directly: the loop runs inside an RCU read-side critical section. Walk the tasks one PID at a time with find_ge_pid(), taking the RCU read lock only to look up and pin each task. The stack is then scanned with no lock held, so cond_resched() runs between tasks and the scan stops early on scan_should_stop(). This follows the next_tgid()/task_seq_get_next() iteration pattern and keeps each RCU critical section short. | ||||
| CVE-2026-89514 | 1 Linux | 1 Linux Kernel | 2026-09-12 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: scsi: fnic: Use GFP_ATOMIC for VLAN alloc under spinlock fnic_fcoe_process_vlan_resp() allocates a VLAN descriptor with kzalloc_obj() (default GFP_KERNEL) while holding vlans_lock via spin_lock_irqsave(). GFP_KERNEL may sleep, which is not allowed in this atomic context and can trigger a sleeping-from-invalid-context warning or deadlock. Pass GFP_ATOMIC so the allocation is safe under the IRQ-safe spinlock. | ||||
| CVE-2026-89716 | 1 Linux | 1 Linux Kernel | 2026-09-12 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: zram: validate deflate params We must validate user-supplied deflate winbits before we pass it to zlib_deflate_workspacesize(), which triggers BUG_ON() if winbits value is outside of valid ranges. | ||||
| CVE-2026-89727 | 1 Linux | 1 Linux Kernel | 2026-09-12 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: GICv2: Don't WARN on out-of-range GICV_DIR INTID vgic_v2_deactivate() passes the INTID a guest wrote to GICV_DIR straight to vgic_get_vcpu_irq(), and treats a failed lookup as a "can't happen" condition with WARN_ON_ONCE(). The guest can make it happen at will, though: for any INTID outside of the implemented SGI, PPI and SPI ranges the lookup returns NULL, since GICv2 has no LPIs. A guest running with EOImode==1 writing such an INTID to GICV_DIR triggers the WARN, and panics hosts running with panic_on_warn. Drop the WARN and ignore failed lookups. | ||||
| CVE-2026-89556 | 1 Linux | 1 Linux Kernel | 2026-09-12 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: module: validate string table section types In elf_validity_cache_sechdrs, section sizes and offsets are validated, unless the section type is SHT_NULL or SHT_NOBITS. Later, elf_validity_cache_secstrings and elf_validity_cache_index_str access the section name table (.shstrtab) and symbol string table (.strtab) headers without first ensuring that their types are SHT_STRTAB. If a section type is SHT_NULL or SHT_NOBITS, sh_offset has not been validated and may reference out-of-bounds memory when dereferenced in elf_validity_cache_secstrings or elf_validity_cache_strtab. Validate that both string section headers are of type SHT_STRTAB before caching them. | ||||
| CVE-2026-89715 | 1 Linux | 1 Linux Kernel | 2026-09-12 | 5.3 Medium |
| In the Linux kernel, the following vulnerability has been resolved: NFS/localio: fix ref leak on nfs_uuid_add_file failure When nfs_uuid_add_file() races with nfs_uuid_put() tearing down uuid->net, it returns -ENXIO without publishing nfl->nfs_uuid via rcu_assign_pointer(). nfs_open_local_fh() then enters its error branch and only releases the slot's file ref and its paired net ref plus its own entry-time net ref, while the close path is a no-op: nfs_close_local_fh() nfs_uuid = rcu_dereference(nfl->nfs_uuid); if (!nfs_uuid) { rcu_read_unlock(); return; } /* always */ nfsd_open_local_fh() returns localio holding a caller-owned +1 nfsd_file reference (from nfsd_file_get() after nfsd_file_acquire_local()) and an entry-time nfsd_net reference (from its first nfsd_net_try_get()) embedded as nf->nf_net. Both are leaked on the failure path, pinning one nfsd_file (and the underlying struct file, dentry, inode) and one nfsd_net_ref per occurrence, which blocks nfsd_net and netns teardown. Fix by releasing the caller-owned file ref and its net ref through the existing helper, using a stack-local RCU pointer so the helper can xchg it out, then returning -ENXIO so callers do not dereference a localio whose slot has been cleared: struct nfsd_file __rcu *tmp = RCU_INITIALIZER(localio); nfs_to_nfsd_file_put_local(pnf); nfs_to_nfsd_file_put_local(&tmp); localio = ERR_PTR(-ENXIO); The trailing nfs_to_nfsd_net_put(net) continues to release the outer net ref, so all three nfsd_net_try_get() increments are balanced on the error branch. | ||||
| CVE-2026-89770 | 1 Linux | 1 Linux Kernel | 2026-09-12 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: iomap: don't free integrity payload that doesn't exist fs_bio_integrity_alloc might not allocate a bio integrity payload if PI verification is disabled on the block device. Check for that case before calling fs_bio_integrity_free in iomap_bio_read_folio_range_sync to avoid a NULL pointer dereferences. Make the branch cover the PI verification as well - while fs_bio_integrity_verify works without an integrity payload, it requires one to actually do useful work. | ||||
| CVE-2026-89728 | 1 Linux | 1 Linux Kernel | 2026-09-12 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: i3c: renesas: Fix out-of-bounds access for newdevs mask When software initiates DAA (Dynamic Address Assignment), the controller reports the result via the NRSPQP (Normal Response Queue Port Register). The data length field of the response descriptor, which is accessible through the NRSPQP register, indicates the number of devices remaining after DAA. Consequently, when the bus is empty, this field contains the maximum number of devices supported by the controller (8 for the Renesas I3C controller). Adjust the condition that computes the newly discovered devices bitmask to prevent an out-of-bounds when the I3C bus is empty. | ||||
| CVE-2026-89734 | 1 Linux | 1 Linux Kernel | 2026-09-12 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: usb: gadget: uvc: Fix null pointer dereference in uvcg_video_init() In uvcg_video_init(), if kthread_run_worker() fails, the error logged uses uvcg_err(), however, the pointer it uses: video->uvc is not assigned at this point, triggering a null pointer dereference. Fix this by directly using uvc->func which is assigned already. | ||||
| CVE-2026-80788 | 1 Linux | 1 Linux Kernel | 2026-09-12 | 6.2 Medium |
| In the Linux kernel, the following vulnerability has been resolved: nvmet-tcp: Do not WARN on remotely-controlled oversized SGL allocations When fuzzing the nvme target code, I tripped a kernel warning in nvmet_tcp_map_data() because the length passed into the allocator is controlled by the remote initiator. A remote initiator that sends a command with an SGL claiming a huge number, can create a scatterlist and iovec allocation of over 1 million entries, which causes the backing kmalloc call to exceed MAX_PAGE_ORDER and then the page allocator will trip on a WARN_ON_ONCE_GFP() message: WARNING: mm/page_alloc.c:5280 __alloc_frozen_pages_noprof Workqueue: nvmet_tcp_wq nvmet_tcp_io_work ... sgl_alloc_order nvmet_tcp_map_data nvmet_tcp_try_recv_pdu As it's never good to trip a kernel warning remotely due to many systems having panic-on-warn enabled, let's silence it by just add GFP_NOWARN to the allocation flags. | ||||