Export limit exceeded: 395167 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (395167 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-87966 | 2 Easy-appointments, Wordpress | 2 Easy Appointments, Wordpress | 2026-09-18 | N/A |
| The Easy Appointments WordPress plugin before 4.0.2.2 does not perform an ownership or authorization check on its unauthenticated appointment-reservation endpoint before updating an existing appointment identified by a request-supplied id, allowing unauthenticated attackers to overwrite, and through a follow-on cleanup delete, arbitrary appointments. | ||||
| CVE-2026-89818 | 1 Linux | 1 Linux Kernel | 2026-09-18 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/vcn: fix integer overflow in dec_msg buffer count check If the supplied msg[2] (num_buffers) is 0x3FFFFFFF, the expression 6 + num_buffers * 4 wraps to 2 and the bounds check passes, letting the parser loop far past the end of the message BO. Triggering it additionally requires a ~4GiB mapping so that msg[1] survives the earlier "header does not fit in BO" check. Rewrite the test in division form, which is overflow-free by construction. Also update the message to reflect that msg is invalid. | ||||
| CVE-2026-89828 | 1 Linux | 1 Linux Kernel | 2026-09-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: Fix init ordering in amdgpu_vram_mgr_init() drmm_cgroup_register_region() is called before INIT_LIST_HEAD() and gpu_buddy_init() in amdgpu_vram_mgr_init(). If it fails, the function returns early and bypasses those initializations. Since adev->mman.initialized is set to true before amdgpu_vram_mgr_init() is called, a failure triggers amdgpu_ttm_fini(), which calls amdgpu_vram_mgr_fini(), which then: - Calls list_for_each_entry_safe() on reservations_pending and reserved_pages, whose list_head::next pointers are zero-initialized (NULL). The loop does not recognize them as empty and dereferences NULL. - Calls gpu_buddy_fini(), which iterates free_trees[] unconditionally via for_each_free_tree(). Since mm->free_trees is NULL (never allocated), this dereferences NULL. Both result in a kernel panic on the module load error path. Fix by moving drmm_cgroup_register_region() to after the list and buddy allocator are fully initialized, so the teardown path is safe to run. | ||||
| CVE-2026-89829 | 1 Linux | 1 Linux Kernel | 2026-09-18 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to pass folio->index to f2fs_sanity_check_node_footer() Otherwise in f2fs_sanity_check_node_footer(), it will check the same nid incorrectly. | ||||
| CVE-2026-89830 | 1 Linux | 1 Linux Kernel | 2026-09-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: f2fs: fix valid block count leak on data block allocation failure In __allocate_data_block(), when allocating a new data block (dn->data_blkaddr == NULL_ADDR), inc_valid_block_count() is called first to increment total_valid_block_count and i_blocks. If the subsequent f2fs_allocate_data_block() fails, the function returns the error directly without rolling back the already-incremented block counts, causing a permanent leak. Fix this by calling dec_valid_block_count() to undo the increment before returning the error. The condition old_blkaddr == NULL_ADDR precisely identifies the case where inc_valid_block_count() was called. | ||||
| CVE-2026-89834 | 1 Linux | 1 Linux Kernel | 2026-09-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to migrate all curseg types during free_segment_range In free_segment_range(), the curseg evacuation loop only iterates up to NR_CURSEG_PERSIST_TYPE (0..5), missing non-persistent in-memory curseg types such as CURSEG_COLD_DATA_PINNED and CURSEG_ALL_DATA_ATGC. Even though these in-memory curseg types are not saved in the on-disk checkpoint header, they still occupy active physical segments at runtime. If an active in-memory curseg happens to be allocated within the segment range being truncated during filesystem shrink, failing to evacuate it will cause subsequent writes to the curseg attempting out-of-bounds I/O on the truncated storage range. Fix this by expanding the curseg evacuation loop upper bound to NR_CURSEG_TYPE to ensure all active curseg types are safely migrated out of the target range. | ||||
| CVE-2026-89835 | 1 Linux | 1 Linux Kernel | 2026-09-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: f2fs: avoid NULL checkpoint thread access in sysfs checkpoint_merge can be enabled even when no checkpoint merge thread is running. A read-only mount is one case: f2fs does not start f2fs_issue_ckpt there, but ckpt_thread_ioprio is still writable through sysfs. The ckpt_thread_ioprio store path updates the saved ioprio value and, when checkpoint_merge is enabled, calls set_task_ioprio() for the checkpoint thread. If cprc->f2fs_issue_ckpt is NULL, that dereferences a NULL task pointer. Protect ckpt_thread_ioprio sysfs writes with s_umount as well, so the checkpoint thread cannot disappear under the store path while updating its ioprio. | ||||
| CVE-2026-89837 | 1 Linux | 1 Linux Kernel | 2026-09-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: f2fs: fix dentry folio leak in find_in_level find_in_level() gets a dentry folio with f2fs_find_data_folio() before calling find_in_block(). If find_in_block() returns an error, the function stores the error in res_folio and breaks out of the loop without dropping the dentry folio. This leaks the folio reference on the find_in_block() error path. Drop the dentry folio before returning the error to the caller. | ||||
| CVE-2026-89847 | 1 Linux | 1 Linux Kernel | 2026-09-18 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Avoid double completion in async IOCB timeout qla2x00_async_iocb_timeout() tries to abort a timed-out async IOCB. When qla24xx_async_abort_cmd() fails, both the SRB_LOGIN_CMD path and the SRB_CTRL_VP/default path scan outstanding_cmds[] for the SRB and then call sp->done(sp, QLA_FUNCTION_TIMEOUT) unconditionally, without checking whether the SRB was actually found and removed. If the response ISR completes the same handle first, it removes the SRB under qp_lock_ptr and runs sp->done() -> complete(sp->comp). The submitter qla24xx_control_vp() wakes from wait_for_completion(), clears sp->comp, drops its reference and returns, reclaiming the on-stack completion. The timer reference keeps the SRB alive across the timeout handler, but not the submitter's stack. The timeout then issues a second sp->done() -> qla_ctrlvp_sp_done(), which evaluates "if (sp->comp) complete(sp->comp)"; with the pointer loaded before the submitter's NULL store, complete() writes into the freed stack frame, a use-after-free. Track whether this path removed the SRB from outstanding_cmds and only call sp->done() when it did, so the command is completed exactly once by whichever path owns it. This mirrors the sp_found guard already used in qla24xx_abort_iocb_timeout(). | ||||
| CVE-2026-89848 | 1 Linux | 1 Linux Kernel | 2026-09-18 | 8.1 High |
| In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Quiesce response IRQ before freeing request queue qla2xxx_delete_qpair() deletes the request queue before the response queue. qla25xx_delete_req_que() frees the request queue memory (kfree(req) in qla25xx_free_req_que()), but the response-queue MSI-X is only released later, in qla25xx_free_rsp_que(). In that window the response interrupt can still fire, qla2xxx_msix_rsp_q() queues qpair->q_work, and qla_do_work() -> qla24xx_process_response_queue() dereferences the now-freed rsp->req (LOGINOUT/CT/ELS entries and the status path), a use-after-free. The cancel_work_sync() added for the qpair teardown lives in the response free path, which runs after the request queue is already freed, so it does not protect rsp->req. Release the response-queue interrupt and flush qpair->q_work before deleting the request queue, so no late completion can reach the freed request queue. Clearing have_irq makes the subsequent qla25xx_free_rsp_que() skip its free_irq(), and the firmware queue-delete order (request then response) is preserved; the request-delete mailbox completes on the default vector and is unaffected by dropping the qpair response interrupt early. | ||||
| CVE-2026-85544 | 1 Hikvision | 13 Ds-kd8003, Ds-kd8005, Ds-kv6103 and 10 more | 2026-09-18 | 6.1 Medium |
| Some Hikvision intercom products utilize an immutable factory value which should be obtained from local network or physical interaction with the device within their main card, which may allow attackers to forge a legitimate main card, thereby gaining the permission to issue cards. | ||||
| CVE-2026-87743 | 1 Redhat | 10 Apicurio Registry, Build Keycloak, Camel Quarkus and 7 more | 2026-09-18 | 7.5 High |
| A flaw was found in Quarkus HTTP security. An unauthenticated attacker can exploit a discrepancy in how paths are normalized between the security matcher and HTTP request dispatchers. This allows the attacker to craft a URL that the security matcher considers public, but which is then routed to a protected endpoint, leading to an authorization bypass and potential unauthorized access to sensitive information. | ||||
| CVE-2026-89796 | 1 Linux | 1 Linux Kernel | 2026-09-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: mm/damon/core: avoid infinite kdamond_merge_regions() internal loop Patch series "mm/damon: unurgent fixes for infinite loop, NULL de-ref and races", v1.1. Sashiko found a few issues in DAMON that could cause infinite loop, NULL dereference and monitoring results degradation. The first two sounds scary but the infinite loop happens only under unreasonable user setup. The NULL dereference is only in a unit test. Monitoring results degradation is trivial since it is only best-effort, and those happens from only unlikely races. Still those are bugs that better to fix if possible. Fix those. This patch (of 6): Due to online parameter update like events, the number of DAMON regions could be higher than the user-set upper limit. kdamond_merge_regions() repeats merge regions until the number meets the limit, while doubling the merge threshold up to the theoretical maximum threshold. It is tried only up to the theoretical maximum threshold because even the aggressive merging can fail from reducing the number of regions under the user-defined upper limit. For example, there could be many user-defined non-contiguous regions that cannot be merged. The threshold based loop break condition is evaluated by comparing the threshold for the next merging try against the theoretical maximum threshold. If max_thres is larger than UINT_MAX / 2, doubling the threshold could make it overflow, and bypass the loop break condition. In the case, if the number of regions cannot be reduced under the upper limit like explained above, the loop will run infinitely. Prevent the case by doing the break condition check before doubling the threshold. Also, prevent the threshold exceeding the maximum threshold, as it could overflow and apply the wrong merge threshold. This issue is unlikely to occur in real world, since having the max_thres higher than UINT_MAX / 2 require unrealistically large aggregation intervals compared to the sampling interval. Also, it requires an unrealistically large number of uncontiguous regions setup. Nonetheless, the consequence is bad and the fix is simple. The issue was discovered [1] by Sashiko. | ||||
| CVE-2026-89803 | 1 Linux | 1 Linux Kernel | 2026-09-18 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/nouveau: unsubscribe the channel-kill event before the fence context nouveau_channel_del() tears the fence context down first and only drops the channel-kill subscription later, in the middle of the nvif object teardown: if (chan->fence) nouveau_fence(chan->cli->drm)->context_del(chan); ... nvif_object_dtor(&chan->vram); nvif_event_dtor(&chan->kill); The subscribed handler is nouveau_channel_killed(), which calls nouveau_channel_kill() and from there nouveau_fence_context_kill() on chan->fence. A kill event delivered in that window takes fctx->lock and walks fctx->pending on a fence context that context_del() has already freed. Nothing reaches this below Fermi today, because the subscription is gated on FERMI_CHANNEL_GPFIFO and nothing kills a channel there. On Fermi and newer the window is real but narrow, since a kill has to land exactly while the channel is being destroyed. That is reason enough on its own, which is why this carries a Fixes: tag. The last patch in this series subscribes Tesla channels as well; nothing kills those today, so it does not widen the exposure now, but it is the groundwork for a recovery path that would, and the ordering is better fixed before that lands than alongside it. Drop the subscription before anything it depends on is torn down. | ||||
| CVE-2026-89805 | 1 Linux | 1 Linux Kernel | 2026-09-18 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/pagemap: Fix folio allocation fallback and use-after-put drm_pagemap_migrate_populate_ram_pfn() had two issues when populating RAM PFNs with higher-order folios: 1. The higher-order vma_alloc_folio()/folio_alloc() calls did not pass __GFP_NOWARN, so a THP allocation failure under memory pressure would spam the kernel log, and there was no fallback path despite a TODO comment stating one was needed. Add __GFP_NOWARN to the higher-order allocation and, on failure, fall back to order-0 allocations for the entire range originally covered by the failed higher-order allocation, leaving MIGRATE_PFN_COMPOUND unset for those PFNs. 2. In the free_pages error path, order was computed via folio_order(page_folio(page)) *after* put_page(page) had already dropped the reference, resulting in a use-after-free/put when that was the last reference on the page. Compute order before releasing the page. Introducing the fallback in 1. also requires the source page array handed to ->copy_to_ram() to be built differently. Both callers only populated the entry at the head of each source folio, relying on the copy callback to derive the rest of the folio from the order recorded in the matching drm_pagemap_addr. Once the destination has been demoted to order-0 folios the drm_pagemap_addr entries are per-page, so a source page is needed for every one of them; leaving them NULL makes the copy callback stop after the first page and the remainder of the range is never copied. The source folio is only split later, by migrate_vma_pages() / migrate_device_pages(), so its order cannot be used to detect the demotion - test the destination for MIGRATE_PFN_COMPOUND instead. Factor the array population out into drm_pagemap_migrate_populate_src_pages() and use it from both drm_pagemap_evict_to_ram() and __drm_pagemap_migrate_to_ram(). | ||||
| CVE-2026-89807 | 1 Linux | 1 Linux Kernel | 2026-09-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: guard against NULL restore_mqd in CRIU queue restore Both create_queue_cpsch() and create_queue_nocpsch() unconditionally call mqd_mgr->restore_mqd() when a CRIU restore is in progress (qd != NULL), with no NULL guard. On any system where restore_mqd is not implemented for the given queue type, a user holding CAP_CHECKPOINT_RESTORE can trigger a kernel NULL pointer dereference and panic the machine by issuing KFD_IOC_CRIU_OP_RESTORE with a crafted queue restore object. Note that checkpoint_mqd is likewise unimplemented on GFX12, so no legitimate CRIU image can reach this path — only a hand-crafted restore payload. Add a NULL guard for restore_mqd immediately after mqd_mgr is resolved, unwinding via the existing error labels and returning -EOPNOTSUPP if the callback is not implemented. This mirrors the existing checkpoint_mqd guard in checkpoint_mqd(). | ||||
| CVE-2026-89811 | 1 Linux | 1 Linux Kernel | 2026-09-18 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: Add TLB flush after MES queue eviction/suspension MES (Micro Engine Scheduler) does not perform heavy-weight TLB invalidation after unmapping queues, unlike HWS which does this automatically. This causes a race condition where in-flight DMA descriptors can access memory that has been unmapped, leading to page faults and GPU queue hangs during SVM page migration. The issue manifests as KFDSVMRangeTest.MultiThreadMigrationTest failures on gfx1151 (Strix Point) with XNACK mode 1 enabled - the GPU compute queue hangs with packets submitted but never consumed. Add kfd_flush_tlb() calls after MES queue removal in two locations: - evict_process_queues_cpsch(): after all queues removed during eviction - suspend_queues(): after debug/criu queue suspension (with mem_fence barrier) This ensures all in-flight memory accesses from unmapped queues are flushed before memory is freed or migrated. (cherry picked from commit f5c4f88e0f9c45a8fb9dfac0c1df726c95e41b77) | ||||
| CVE-2026-89849 | 1 Linux | 1 Linux Kernel | 2026-09-18 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Reject non-SCSI SRB on status IOCB fast path qla2x00_status_entry() filters out non-TYPE_SRB entries and the SRB_NVME_CMD, SRB_BIDI_CMD and SRB_TM_CMD types, then falls through to a SCSI fast path that assumes the command is an SRB_SCSI_CMD. The first thing on that path, qla_chk_edif_rx_sa_delete_pending(), and the subsequent handling both evaluate GET_CMD_SP(sp), i.e. sp->u.scmd.cmd. The srb u union overlays the SCSI command pointer with other command layouts (bsg_job, iocb_cmd). If firmware delivers an unexpected STATUS_TYPE IOCB for a non-SCSI handle, sp->u.scmd.cmd can read as a non-NULL garbage pointer, bypassing the NULL checks in qla_chk_edif_rx_sa_delete_pending() and at the cp == NULL test, and leading to a wild pointer dereference. Reject any SRB whose type is not SRB_SCSI_CMD before entering the fast path. The outstanding_cmds slot is left untouched so a genuinely non-SCSI command still completes through its proper handler. | ||||
| CVE-2026-89850 | 1 Linux | 1 Linux Kernel | 2026-09-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Don't query firmware state while chip is down qla2x00_fw_state_show() initializes rval to QLA_FUNCTION_FAILED and jumps to the out: label when the chip is down or EEH is busy. The out: block then re-issued qla2x00_get_firmware_state() because rval != QLA_SUCCESS, defeating the chip-down/EEH-busy guards and issuing a mailbox command (outside optrom_mutex) during ISP reset or PCI error recovery, which can hang the adapter. It also turned a normal in-lock mailbox failure into a second unsynchronized mailbox attempt. Make the out: fallback only mark the firmware state as unknown. The mailbox is now issued at most once, inside optrom_mutex, and only when the chip is up and not EEH-busy. | ||||
| CVE-2026-89856 | 1 Linux | 1 Linux Kernel | 2026-09-18 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Clamp MSI-X derived queue counts to avoid truncation ha->msix_count is u16, but ha->max_req_queues, ha->max_rsp_queues and ha->max_qpairs are u8. Deriving the queue count as "ha->max_req_queues = ha->msix_count - 1" therefore truncates: a board (or a misconfigured/malicious hot-plugged device) advertising 257 MSI-X vectors yields msix_count - 1 == 256, which truncates to 0. An MSI-X count of 1 zeroes it as well, and in target mode the subsequent "ha->max_req_queues--" then underflows 0 to 255. When the count is 0, qla2x00_alloc_queues() calls kzalloc_objs(struct req_que *, 0), which returns ZERO_SIZE_PTR. That is not NULL, so the allocation check passes and the following "ha->req_q_map[0] = req" dereferences ZERO_SIZE_PTR, corrupting memory or crashing the kernel. Add qla_calc_queue_count() to clamp the derived value into [1, QLA_MAX_QUEUES - 1] so it always fits in u8 and is never zero, and use it at all three derivation sites (qla25xx_iospace_config(), qla83xx_iospace_config() and qla24xx_enable_msix()). Also guard the target-mode decrement so it cannot reintroduce a zero (which would in turn underflow max_qpairs). | ||||