Export limit exceeded: 417349 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 417349 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (417349 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-89877 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: media: saa7164: fix cleanup on resource allocation failure saa7164_dev_setup() adds the device to the global saa7164_devlist before requesting the PCI BAR memory regions. If get_resources() fails, saa7164_dev_setup() decrements the device count and returns an error, but leaves the device on saa7164_devlist. The probe error path then frees the device, leaving a dangling entry on the global list. Reuse the existing MMIO mapping error path to remove the device from saa7164_devlist and decrement the device count before returning. Also release BAR0 if it was successfully requested but the BAR2 request fails. | ||||
| CVE-2026-89870 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: media: zoran: Avoid freeing a registered video_device twice zoran_init_video_device() installs zoran_vdev_release() as the video_device release callback through zoran_template. After video_register_device() succeeds, video_unregister_device() drops the registered video_device reference and the V4L2 core eventually invokes that release callback, which kfree()s the video_device. zoran_exit_video_devices() called video_unregister_device() and then kfree(zr->video_dev), so device teardown could free the same video_device twice. Remove the direct kfree() and clear the cached pointer after unregistering. The pre-registration failure path keeps its manual free because the video_device was not registered there. This issue was found by a static analysis checker and confirmed by manual source review. | ||||
| CVE-2026-89860 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Initialize NVMe abort_work once at submission qla_nvme_fcp_abort() and qla_nvme_ls_abort() ran INIT_WORK() on priv->abort_work immediately before schedule_work(). INIT_WORK() reinitializes the work_struct, resetting its list head and clearing the pending bit. If an abort is issued more than once for the same command (for example, concurrent transport teardown and a timeout-driven abort), the second INIT_WORK() reinitializes a work item that is already queued, which can corrupt the workqueue list and lead to crashes or a looping worker. Initialize priv->abort_work once at command submission, next to the existing per-command spin_lock_init(&priv->cmd_lock), and leave only schedule_work() in the abort paths. schedule_work() already does nothing when the work item is still pending, so a repeated abort no longer disturbs an in-flight work item. The command is not returned to the transport until the final kref_put()/release callback runs after abort_work has completed, so the work item is idle before priv is reused and the single submission-time INIT_WORK() is safe. | ||||
| CVE-2026-89859 | 1 Linux | 1 Linux Kernel | 2026-10-30 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Zero dport diagnostics buffer to avoid info leak qla2x00_do_dport_diagnostics() allocates the qla_dport_diag response buffer with kmalloc_obj() (non-zeroing) and, on success, copies the full sizeof(*dd) back to user space via sg_copy_from_buffer(). The inbound sg_copy_to_buffer() only fills as many bytes as the user request payload provides, and qla26xx_dport_diagnostics() zeroes only dd->buf. The options and unused[] fields are therefore copied out uninitialized, leaking kernel heap contents to user space. Allocate with kzalloc_obj(), matching qla2x00_do_dport_diagnostics_v2(). | ||||
| CVE-2026-89848 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 8.1 High |
| In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Quiesce response IRQ before freeing request queue qla2xxx_delete_qpair() deletes the request queue before the response queue. qla25xx_delete_req_que() frees the request queue memory (kfree(req) in qla25xx_free_req_que()), but the response-queue MSI-X is only released later, in qla25xx_free_rsp_que(). In that window the response interrupt can still fire, qla2xxx_msix_rsp_q() queues qpair->q_work, and qla_do_work() -> qla24xx_process_response_queue() dereferences the now-freed rsp->req (LOGINOUT/CT/ELS entries and the status path), a use-after-free. The cancel_work_sync() added for the qpair teardown lives in the response free path, which runs after the request queue is already freed, so it does not protect rsp->req. Release the response-queue interrupt and flush qpair->q_work before deleting the request queue, so no late completion can reach the freed request queue. Clearing have_irq makes the subsequent qla25xx_free_rsp_que() skip its free_irq(), and the firmware queue-delete order (request then response) is preserved; the request-delete mailbox completes on the default vector and is unaffected by dropping the qpair response interrupt early. | ||||
| CVE-2026-89840 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: f2fs: validate MOVE_RANGE destination size F2FS_IOC_MOVE_RANGE checks the source range, but not the destination end before updating i_size. A source hole can expose this: __clone_blkaddrs() skips NULL_ADDR entries and returns success, so the caller can still extend the destination inode with unchecked pos_out + len. Reject destination overflow and use inode_newsize_ok() before extending the destination inode. | ||||
| CVE-2026-89838 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: f2fs: limit recovery filename logging to stored length F2FS stores recovery filenames as a length plus a fixed-size i_name buffer. The buffer is not NUL-terminated, but recover_inode() and recover_dentry() print it with %s. For a 255-byte filename, recovery logging can read past i_name into the following raw inode fields. Print the name with a precision bounded by i_namelen and F2FS_NAME_LEN. | ||||
| CVE-2026-89837 | 1 Linux | 1 Linux Kernel | 2026-10-30 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: f2fs: fix dentry folio leak in find_in_level find_in_level() gets a dentry folio with f2fs_find_data_folio() before calling find_in_block(). If find_in_block() returns an error, the function stores the error in res_folio and breaks out of the loop without dropping the dentry folio. This leaks the folio reference on the find_in_block() error path. Drop the dentry folio before returning the error to the caller. | ||||
| CVE-2026-89835 | 1 Linux | 1 Linux Kernel | 2026-10-30 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: f2fs: avoid NULL checkpoint thread access in sysfs checkpoint_merge can be enabled even when no checkpoint merge thread is running. A read-only mount is one case: f2fs does not start f2fs_issue_ckpt there, but ckpt_thread_ioprio is still writable through sysfs. The ckpt_thread_ioprio store path updates the saved ioprio value and, when checkpoint_merge is enabled, calls set_task_ioprio() for the checkpoint thread. If cprc->f2fs_issue_ckpt is NULL, that dereferences a NULL task pointer. Protect ckpt_thread_ioprio sysfs writes with s_umount as well, so the checkpoint thread cannot disappear under the store path while updating its ioprio. | ||||
| CVE-2026-89834 | 1 Linux | 1 Linux Kernel | 2026-10-30 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to migrate all curseg types during free_segment_range In free_segment_range(), the curseg evacuation loop only iterates up to NR_CURSEG_PERSIST_TYPE (0..5), missing non-persistent in-memory curseg types such as CURSEG_COLD_DATA_PINNED and CURSEG_ALL_DATA_ATGC. Even though these in-memory curseg types are not saved in the on-disk checkpoint header, they still occupy active physical segments at runtime. If an active in-memory curseg happens to be allocated within the segment range being truncated during filesystem shrink, failing to evacuate it will cause subsequent writes to the curseg attempting out-of-bounds I/O on the truncated storage range. Fix this by expanding the curseg evacuation loop upper bound to NR_CURSEG_TYPE to ensure all active curseg types are safely migrated out of the target range. | ||||
| CVE-2026-89833 | 1 Linux | 1 Linux Kernel | 2026-10-30 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to avoid potential deadloop in f2fs_fsync_node_pages() There is potential deadloop in race condition: Thread A Thread B - fsync - f2fs_do_sync_file - f2fs_fsync_node_pages - last_fsync_dnode - folio_get(last_folio) - f2fs_setattr - f2fs_truncate - f2fs_truncate_blocks - f2fs_do_truncate_blocks - f2fs_truncate_inode_blocks - truncate_dnode - truncate_node - invalidate_mapping_pages - folio->mapping = NULL - is_node_folio alwasy return false - atomic && !marked is always true, then goto retry | ||||
| CVE-2026-89832 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to clear dirty flag on folio in error path If node block is corrupted due to chksum mismatch or inconsistent footer info, it needs to drop clear flag of node folio, in order to persist inconsistent node data to storage. | ||||
| CVE-2026-89813 | 1 Linux | 1 Linux Kernel | 2026-10-30 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: force complete the KIQ ring fences on reset Like the MES scheduler ring, the KIQ ring sets no_scheduler = true and uses a polling fence, so it is skipped by the force-completion loop in amdgpu_device_pre_asic_reset(). Its hw fence value lives in wb (GTT) memory and survives a MODE1 reset while fence_drv.sync_seq keeps advancing, so after a reset the first KIQ submission can poll forever on a seq that is never written back. Force complete the KIQ ring fences too so their hw fence is realigned to sync_seq. | ||||
| CVE-2026-89811 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: Add TLB flush after MES queue eviction/suspension MES (Micro Engine Scheduler) does not perform heavy-weight TLB invalidation after unmapping queues, unlike HWS which does this automatically. This causes a race condition where in-flight DMA descriptors can access memory that has been unmapped, leading to page faults and GPU queue hangs during SVM page migration. The issue manifests as KFDSVMRangeTest.MultiThreadMigrationTest failures on gfx1151 (Strix Point) with XNACK mode 1 enabled - the GPU compute queue hangs with packets submitted but never consumed. Add kfd_flush_tlb() calls after MES queue removal in two locations: - evict_process_queues_cpsch(): after all queues removed during eviction - suspend_queues(): after debug/criu queue suspension (with mem_fence barrier) This ensures all in-flight memory accesses from unmapped queues are flushed before memory is freed or migrated. (cherry picked from commit f5c4f88e0f9c45a8fb9dfac0c1df726c95e41b77) | ||||
| CVE-2026-89810 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: Fix error path at svm_migrate_copy_to_ram If page migration from device to sys ram fails for some reasons driver needs release and unlock allocated system pages. To do that driver should use page physical address, or pfn, then get struct page*. Current driver uses dma address(for adev) that is not correct with IOMMU enabled, or even in general. The patch releases and unlocks allocated system pages based on where migration failed by struct page* of sys ram pages. Also dma_unmap correspodent system ram pages at error path. | ||||
| CVE-2026-89808 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: Fix the case that vm range is hole at svm_migrate_copy_to_vram When migration vm range is hole at cpu side(MIGRATE_PFN_MIGRATE set + MIGRATE_PFN_VALID unset) driver still allocates device pages. There is no dma map of src pages and migration. j is 0 and svm_migrate_copy_memory_gart() will return an uninitialized r. That can trigger out_free_vram_pages to drop all VRAM just set up. Initialize r and only call the last svm_migrate_copy_memory_gart if j > 0. Current code postponed the last page to the final copy. This patch flushes on the last page when reach to the end of current drm_buddy_block; avoids another svm_migrate_copy_memory_gart. | ||||
| CVE-2026-89803 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/nouveau: unsubscribe the channel-kill event before the fence context nouveau_channel_del() tears the fence context down first and only drops the channel-kill subscription later, in the middle of the nvif object teardown: if (chan->fence) nouveau_fence(chan->cli->drm)->context_del(chan); ... nvif_object_dtor(&chan->vram); nvif_event_dtor(&chan->kill); The subscribed handler is nouveau_channel_killed(), which calls nouveau_channel_kill() and from there nouveau_fence_context_kill() on chan->fence. A kill event delivered in that window takes fctx->lock and walks fctx->pending on a fence context that context_del() has already freed. Nothing reaches this below Fermi today, because the subscription is gated on FERMI_CHANNEL_GPFIFO and nothing kills a channel there. On Fermi and newer the window is real but narrow, since a kill has to land exactly while the channel is being destroyed. That is reason enough on its own, which is why this carries a Fixes: tag. The last patch in this series subscribes Tesla channels as well; nothing kills those today, so it does not widen the exposure now, but it is the groundwork for a recovery path that would, and the ordering is better fixed before that lands than alongside it. Drop the subscription before anything it depends on is torn down. | ||||
| CVE-2026-89799 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Disable preemption in bpf_get_stackid The get_perf_callchain call needs disabled preemption plus we need it disabled as long as we access its returned trace entries buffer. Note the bpf_get_stackid_pe function is executed already with preemption disabled. | ||||
| CVE-2026-89795 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: PCI: Allow per function PCI slots to fix slot reset on s390 On s390 systems, which use a machine level hypervisor, PCI devices are always accessed through a form of PCI pass-through which fundamentally operates on a per PCI function granularity. This is also reflected in the s390 PCI hotplug driver which creates hotplug slots for individual PCI functions. Its reset_slot() function, which is a wrapper for zpci_hot_reset_device(), thus also resets individual functions. Currently, the pci_create_slot() assigns the same pci_slot object to multifunction devices. This approach worked fine on s390 systems that only exposed virtual functions as individual PCI domains to the operating system. Since commit 44510d6fa0c0 ("s390/pci: Handling multifunctions") s390 supports exposing the topology of multifunction PCI devices by grouping them in a shared PCI domain. This creates a problem when resetting a function through the hotplug driver's slot_reset() interface. When attempting to reset a function through the hotplug driver, the shared slot assignment causes the wrong function to be reset instead of the intended one. It also leaks memory as we do create a pci_slot object for the function, but don't correctly free it in pci_slot_release(). Add a flag for struct pci_slot to allow per function PCI slots for functions managed through a hypervisor, which exposes individual PCI functions while retaining the topology. Since we can use all 8 bits for slot 'number' (for ARI devices), change slot 'number' u16 to account for special values PCI_SLOT_PLACEHOLDER and PCI_SLOT_ALL_DEVICES. | ||||
| CVE-2026-89794 | 1 Linux | 1 Linux Kernel | 2026-10-30 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: zero pipe read compound padding Compound response handling extends the last response iov to an eight-byte boundary. smb2_read_pipe() allocates only the payload size, so the alignment padding can expose up to seven bytes of uninitialized kernel heap memory. Allocate the aligned size and clear the unused tail before pinning the response buffer. | ||||