Export limit exceeded: 429355 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 429355 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 429355 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (429355 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-99390 | 1 Linux | 1 Linux Kernel | 2026-11-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: xfs: fix correction of unwritten extents in quota file data fork LOLLM noticed a couple of problems with the code that fixes unwritten mappings in the quota file's data fork: first, we should zero the ondisk contents as part of converting them to "unwritten" just in case we crash shortly after the conversion. Second, and more importantly, it noticed that we fail to resynchronize the iext tree cursor after modifying the iext tree. If the tree shape changes, we could be in a world of hurt. Third, we should force a quotacheck if we reset an ondisk dquot. Fix all issues. | ||||
| CVE-2026-99389 | 1 Linux | 1 Linux Kernel | 2026-11-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: smb: server: size directory name conversion buffer correctly A 2048-byte ASCII directory name needs 4098 bytes when converted to UTF-16, including the terminator. ksmbd_convert_dir_info_name() caps its allocation at PATH_MAX and writes past the end of that buffer. Allocate space for one UTF-16 code unit per input byte plus the terminator. Use kmalloc_array() to check the size calculation. | ||||
| CVE-2026-99388 | 1 Linux | 1 Linux Kernel | 2026-11-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: smb: smbdirect: fix buffer length underflow in RDMA transfers When a remote buffer descriptor is larger than the remaining local buffer, smbdirect_connection_rdma_xmit() clamps its length and sets buf_len to zero. The common accounting code then subtracts the clamped length from buf_len, causing it to underflow. If another descriptor follows, the loop processes it with a wrapped remaining length and includes memory beyond the local buffer in the RDMA transfer. A client can trigger an out-of-bounds kernel write with an SMB WRITE request, or an out-of-bounds kernel read with an SMB READ request, by supplying multiple RDMA buffer descriptors with an oversized descriptor before the last one. Remove the premature assignment to buf_len. Subtracting the clamped length already consumes the remaining buffer, so the next iteration stops and only descriptors within the local buffer are used to build work requests. | ||||
| CVE-2026-99387 | 1 Linux | 1 Linux Kernel | 2026-11-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: bound POSIX lock data area by response length CIFSSMBPosixLock() receives a TRANS2 response whose server-provided DataOffset and DataCount are not required by validate_t2() to describe an interval inside the response. A server can therefore make the client read a cifs_posix_lock beyond the response buffer and return those kernel bytes through F_GETLK. Use smbCalcSize() to obtain the full response length after any multipart TRANS2 reassembly, then reject data areas that extend past it before dereferencing them. | ||||
| CVE-2026-99386 | 1 Linux | 1 Linux Kernel | 2026-11-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: don't resurrect an exiting tcon from cached dir workers cfids_laundromat_worker() bumps tcon->tc_count for every expired open cfid and queues cached_dir_offload_close() without checking whether the tcon is already being torn down. Racing with the final cifs_put_tcon(), the tcon comes back from zero and gets torn down twice: T1 T2 cifs_put_tcon() --tc_count == 0, TID_EXITING tconInfoFree() free_cached_dirs() cancel_delayed_work_sync() cfids_laundromat_worker() ++tc_count == 1 queue_work(serverclose_wq) kfree(tcon->origin_fullpath) kfree(tcon) cached_dir_offload_close() close_cached_dir() [UAF] cifs_put_tcon() tconInfoFree() [double free] cached_dir_lease_break() also bumps tc_count without tc_lock, racing with the laundromat's locked update. Take the tcon reference through a helper that refuses once the tcon is TID_EXITING or its refcount has dropped to zero. Queued put_work and close_work then always hold a tcon reference, so tconInfoFree() can't run before they finish and free_cached_dirs() doesn't need to flush any workqueue. If the laundromat can't get a reference, put the cfid back on the dying list for free_cached_dirs() to free; its handle goes away with the tree connection. The lease break path finds the tcon on ses->tcon_list under cifs_tcp_ses_lock, so it can't see TID_EXITING, but it now takes tc_lock. | ||||
| CVE-2026-99385 | 1 Linux | 1 Linux Kernel | 2026-11-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: fix buffer overflow in SMB2_tcon() In SMB2_tcon(), unc_path is allocated with a fixed buffer size of MAX_SHARENAME_LENGTH * 2 bytes (672 bytes). However, the user-controlled UNC path (tree) length is passed to cifs_strtoUTF16(), which assumes the destination buffer is large enough and writes strlen(tree) + 1 UTF-16 code units. Commit 62a1a439e0fd ("cifs: clean up handling of unc= option") removed the length check on UNC mount options, allowing mount paths to exceed MAX_SHARENAME_LENGTH while retaining the fixed-size buffer allocation in SMB2_tcon(). Consequently, an oversized UNC string causes cifs_strtoUTF16() to write past the end of the heap object, resulting in a slab-out-of-bounds write. Furthermore, if a tree exceeds MAX_TREE_SIZE characters, strscpy() truncates it in cifs_tcon::tree_name, causing subsequent reconnects or failovers to fail. Fix this by first verifying that the length of tree does not exceed MAX_TREE_SIZE, returning -EINVAL if it does. Then, dynamically allocate unc_path based on the length of tree so that it safely accommodates all UTF-16 code units for paths within MAX_TREE_SIZE. [pc: remove unused MAX_SHARENAME_LENGTH] | ||||
| CVE-2026-99384 | 1 Linux | 1 Linux Kernel | 2026-11-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: fix OOB read of the resume name sent in TRANS2_FIND_NEXT2 cifs_fill_dirent() reads the fixed part of a directory entry and the name length it holds, or for SMB_FIND_FILE_UNIX scans the name for its terminating NUL, without knowing where the response ends. cifs_save_resume_key() calls it for the entry at the LastNameOffset the server chose, after every FindNext and after the FindFirst of a search rewind, and records the name it returns as the resume name of the search without bounding it; the next CIFSFindNext() copies up to PATH_MAX - 1 bytes from that name into its request and sends them to the server. cifs_filldir() bounds the name against the end of the response since commit f8cf09a53a0d ("smb: client: bound dirent name against end of SMB response in cifs_filldir"), but only after cifs_fill_dirent() has read the entry, and nxt_dir_entry() checks the entries it walks only against sizeof(FILE_DIRECTORY_INFO), for every level but SMB_FIND_FILE_INFO_STANDARD, and never sees the first entry of a response. Bounding where last_entry starts, as the preceding patch does, does not bound the read. A last entry that starts within the final bytes of the response still has its fixed part read past the end of the received data, and the name length it declares, a __le32 for every level but SMB_FIND_FILE_INFO_STANDARD and SMB_FIND_FILE_UNIX, is recorded without being checked against anything. CIFSFindNext() rejects only a length of PATH_MAX or more, then copies the name, up to 4095 bytes, into its request and sends it, and as the report below shows that copy can run past the end of the cifs_request allocation that holds the response. For SMB_FIND_FILE_UNIX the name is in addition scanned for its terminating NUL over up to PATH_MAX + 1 UTF-16 units, or PATH_MAX bytes, before any check. The FindNext that carries the name is only sent by the SMB1 dialect, which is not negotiated by default; reaching it requires an explicit vers=1.0 mount. With KASAN enabled, a response whose last entry declares a name longer than the bytes that follow it gives: ================================================================== BUG: KASAN: slab-out-of-bounds in CIFSFindNext+0x8ca/0x14c0 Read of size 4080 at addr ffff88807c823f98 by task ls/83 CPU: 0 UID: 0 PID: 83 Comm: ls Not tainted 7.3.0-rc4-00457-gf14572c203d5 #69 PREEMPT(lazy) Call Trace: <TASK> kasan_report+0xdf/0x1a0 kasan_check_range+0x10f/0x1e0 __asan_memcpy+0x23/0x60 CIFSFindNext+0x8ca/0x14c0 cifs_readdir+0xf51/0x29c0 iterate_dir+0x1c0/0x570 __x64_sys_getdents64+0x133/0x270 do_syscall_64+0x109/0x5d0 entry_SYSCALL_64_after_hwframe+0x77/0x7f </TASK> Allocated by task 83 on cpu 1 at 13.497119s: cifs_buf_get+0x36/0x90 smb_init+0x4f/0x110 CIFSFindNext+0xf7/0x14c0 cifs_readdir+0xf51/0x29c0 The buggy address belongs to the object at ffff88807c820000 which belongs to the cache cifs_request of size 16588 The buggy address is located 16280 bytes inside of allocated 16588-byte region [ffff88807c820000, ffff88807c8240cc) ================================================================== The read is the memcpy() that copies the recorded name into the next request, so those bytes go to the server. Pass the end of the response to cifs_fill_dirent() and have it reject an entry whose fixed part does not fit or whose name extends past the end, before either is used, so that both callers are covered; cifs_save_resume_key() computes the end the same way cifs_readdir() does. The name bound compares the bytes left between the name and the end with the name length rather than adding the length to the name pointer, since the length is a 32-bit value taken from the entry and the sum could wrap on 32-bit systems. cifs_fill_dirent() is also used on the SMB2 readdir path; there smb2_parse_query_directory() has already checked every entry against the end of the response, so a vali ---truncated--- | ||||
| CVE-2026-99383 | 1 Linux | 1 Linux Kernel | 2026-11-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: reclaim credits for decrypted reads with no matching mid When a decrypted SMB2 READ response carries a MessageId that matches no outstanding request, both the inline receive_encrypted_read() and the offloaded smb2_decrypt_offload() paths drop the frame without accounting the credits the server granted in it. The plaintext unknown-frame path in cifs_demultiplex_thread() already reclaims them with smb2_add_credits_from_hdr(), so encrypted reads leak credits that the plaintext path would not. This also happens for legitimate frames - e.g. a reply that arrives after the client has timed out and dropped the mid - so over a long-lived connection the client's credit count drifts down and can eventually starve it of the ability to issue requests. The frame is AEAD-authenticated, so the granted credits in the decrypted header come from the real server and are safe to apply. Reclaim the credits from the decrypted header before dropping the frame, and export smb2_add_credits_from_hdr() so the SMB2 receive paths can use it. | ||||
| CVE-2026-99382 | 1 Linux | 1 Linux Kernel | 2026-11-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: reject FIND data areas that run past the received response CIFSFindFirst() and CIFSFindNext() take the directory entries of a TRANS2_FIND_FIRST2 or TRANS2_FIND_NEXT2 response from DataOffset for DataCount bytes. validate_t2() bounds DataOffset at 1024 and ParameterCount + DataCount by the byte count, and nothing compares DataOffset + DataCount with the number of bytes SendReceive() copied into the buffer. smb_init() places the request and the response in the same cifs_request allocation and cifs_buf_get() clears only the start of it, so a short response whose data area extends past its end has srch_entries_start point at bytes of the request that was just sent, or at whatever the allocation held before, and those bytes are parsed as directory entries. cifs_readdir() and find_cifs_entry() walk the entries with nxt_dir_entry(), which checks every entry but the first of a response against the end of the SMB; cifs_query_path_info() and cifs_backup_query_path_info() read the first entry with no check at all. Those reads stay inside the allocation, but what they return is not part of the response. The last entry, which LastNameOffset locates relative to the data area, is bounded against the received response by an earlier patch of this series, as is every entry that cifs_fill_dirent() parses; the walk itself and the two query functions are not. SMB1 is not negotiated by default; reaching this code requires an explicit vers=1.0 mount. Reject a response whose data area extends past the received length, with the -EINVAL that validate_t2() returns for the other malformed transaction responses. cifs_query_path_info() and cifs_backup_query_path_info() still read a whole entry from a data area that may be smaller than one; that is not changed here. A conforming server is not affected. The data block of a transaction response is part of the SMB, so DataOffset + DataCount cannot exceed the smbCalcSize() bytes that SendReceive() copies; coalesce_t2() appends each secondary response to the data area and adds its length to both DataCount and the byte count, which keeps that relation. | ||||
| CVE-2026-99381 | 1 Linux | 1 Linux Kernel | 2026-11-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: reject short or out-of-range FIND response parameters CIFSFindFirst() and CIFSFindNext() read the SearchHandle, SearchCount, EndofSearch and LastNameOffset of a TRANS2_FIND_FIRST2 or TRANS2_FIND_NEXT2 response at ParameterOffset. validate_t2() bounds the offset at 1024 and ParameterCount below 512, and nothing compares them with the number of bytes SendReceive() copied into the buffer or with the size of the response parameters. smb_init() places the request and the response in the same cifs_request allocation and cifs_buf_get() clears only the start of it, so a short response with a ParameterOffset past its end has the search handle, the entry count, the end-of-search flag and the last-entry offset read out of the request that was just sent, or out of whatever the allocation held before, and a ParameterCount smaller than the parameters has them read past the end of the parameter block. The reads stay inside the allocation, but what they return is not part of the response, and CIFSFindFirst() then hands back a search handle the server never sent. That handle is sent back to the server in the next FIND_NEXT2 or FIND_CLOSE2, so two bytes of the buffer leak at an offset the server picks. SMB1 is not negotiated by default; reaching this code requires an explicit vers=1.0 mount. Reject a response whose parameter area is smaller than the response parameters or extends past the received length, returning smb_EIO2() with a new smb_eio_traces value for each of the two responses, like the other response checks this file gained since v6.19. Backports to trees before v6.19 need smb_EIO2() replaced with -EINVAL and the trace.h hunk dropped. A conforming server is not affected. The parameter block of a transaction response is part of the SMB, so ParameterOffset + ParameterCount cannot exceed the smbCalcSize() bytes that SendReceive() copies, and the response parameters are 10 bytes for FIND_FIRST2 and 8 bytes for FIND_NEXT2, which is what T2_FFIRST_RSP_PARMS and T2_FNEXT_RSP_PARMS hold. This patch depends on "smb: client: reject FIND data areas that run past the received response", whose declarations it extends. | ||||
| CVE-2026-99380 | 1 Linux | 1 Linux Kernel | 2026-11-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: validate NT transaction response layout and offsets validate_ntransact() assumes that the response uses the fixed 18-word NT transaction layout. A different WordCount makes get_bcc() locate the byte count at a different offset from pSMBr->ByteCount, allowing the subsequent bounds checks to use inconsistent response boundaries. The function also turns the 32-bit ParameterOffset and DataOffset fields into pointers before checking their bounds. On a 32-bit client, a large offset can wrap the pointer below end_of_smb and pass the one-sided pointer comparison. The caller then dereferences the parameter pointer or copies from the data pointer. Require the expected WordCount before reading the byte count. Check each offset and count against the received SMB length as integers before forming either pointer. Use subtraction after validating the offset so that the range checks cannot overflow. | ||||
| CVE-2026-99379 | 1 Linux | 1 Linux Kernel | 2026-11-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: validate SMB1 EA list bounds before parsing CIFSSMBQAllEAs() checks the server-provided EA list length by adding it to the response pointer. On 32-bit systems, a positive length can wrap the pointer and pass the comparison. The parser then walks outside the received response while reading the next FEA header. A response with a list length of 0x40000000 reproduces this as a native i386 page fault and kernel panic from listxattr() against an SMB1 server. Check that the EA list starts within the SMB byte area before reading its header. Keep its length unsigned and compare it with the bytes left in the response without pointer addition. SMB1 is not negotiated by default and requires an explicit vers=1.0 mount. | ||||
| CVE-2026-99378 | 1 Linux | 1 Linux Kernel | 2026-11-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: pnfs/blocklayout: Complete a device upcall when the pipe is closed Once blkmapd has read a whole upcall, rpc_pipe_read() unlinks the message from every pipe list, so the purges in rpc_pipe_release() and rpc_close_pipes() no longer reach it. bl_upcall_ops supplies no .release_pipe callback, and bl_pipe_destroy_msg() returns without completing the upcall because a downcall is expected to follow. A daemon that exits between the read and the write therefore strands its waiter: bl_resolve_deviceid() sleeps in wait_for_completion() and never returns, and it holds nn->bl_mutex across that wait, so every later device resolution in the net namespace blocks behind it. Add a .release_pipe that completes an upcall blkmapd has consumed and left unanswered. Completing an upcall retires it, so a message the framework has already purged is no longer in flight and is not completed a second time here. | ||||
| CVE-2026-99377 | 1 Linux | 1 Linux Kernel | 2026-11-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: NFSv4/pnfs: bound the CB_NOTIFY_DEVICEID array count before allocating decode_devicenotify_args() hands the server's notification count straight to kmalloc_objs() as the array length, without checking it against the message that carried it. Bound it the way nfs4xdr.c bounds an attribute length, against xdr_stream_remaining(). | ||||
| CVE-2026-99376 | 1 Linux | 1 Linux Kernel | 2026-11-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: NFSv4/pnfs: Free the netid when draining a data-server address list nfs4_pnfs_ds_addr_free() releases all three of an address entry's allocations, but the four sites that drain a decoded list before it reaches a data server open-code the loop and free only da_remotestr and the entry, leaking da_netid. Both layout drivers drain that list when nfs4_pnfs_ds_add() returned a data server already in the cache, and again on their error exits. Lift the drain into nfs4_pnfs_ds_addr_list_free() so an address list has one owner. A striping mount reaches the cached case on nearly every GETDEVICEINFO, since many deviceIDs name the same data servers. | ||||
| CVE-2026-99375 | 1 Linux | 1 Linux Kernel | 2026-11-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: NFSv4/flexfiles: fail I/O to the data server once a lock is lost When a client loses a byte-range lock, because its lease expired and it may not recover the lock (nfs.recover_lost_locks=0) or because reclaim failed, it marks the lock state NFS_LOCK_LOST and fails further I/O by that lock owner. Otherwise an application that believes it holds a lock over a range is never told that the lock is gone, and can overwrite data that another client has since written under its own lock on that range. The NFSv4 READ/WRITE and file layout I/O paths apply this in rpc_call_prepare, where nfs4_set_rw_stateid() returns -EIO for a lost lock. The flexfiles data server I/O path does not: the NFSv3 data server path never checked, and the check on the NFSv4 path was removed when the data server stateid began to be taken from the layout. Fail read and write RPCs to the data server in rpc_call_prepare when the lock is lost. The data server path has no use for the stateid that nfs4_set_rw_stateid() selects, and selecting it looks up a delegation or open stateid on every I/O. Instead add nfs4_lock_context_lost(), which only tests NFS_LOCK_LOST, and check it alongside the open state. Its lookup, __nfs4_lookup_lock_state(), is split out of __nfs4_find_lock_state() and takes no reference: a lock state is only unlinked from state->lock_states under state->state_lock, so one found while holding that lock cannot be freed before it is released. Use it in nfs4_copy_lock_stateid() as well, which only reads the lock state under that lock. That drops a reference get and put from stateid selection for all NFSv4 I/O without changing the stateid selected. Terminating the RPC in rpc_call_prepare is not enough on its own. The done callback reads the -EIO as a data server connection error, forgets the device ID, and resets the I/O to pNFS (or, for an NFSv4 data server, possibly to the MDS). After a reset to pNFS a new LAYOUTGET is granted and rpc_call_prepare fails the I/O again, without end. The existing NFS_CONTEXT_BAD check does not loop, since the open state is then invalid and pnfs_update_layout() fails the reset I/O, but it still forgets the device ID. So when an RPC that was never sent fails and the open context is bad, the open state is invalid, or the lock is lost, complete it with -EIO without error handling. An RPC that was sent and failed is handled as before, so a real data server error is still reported to the MDS. | ||||
| CVE-2026-99374 | 1 Linux | 1 Linux Kernel | 2026-11-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: NFSv4/flexfiles: Use the full 64-bit stripe_unit ff_layout_alloc_lseg() decodes stripe_unit as the 64-bit value the protocol defines and struct nfs4_ff_layout_segment stores it as one, but both consumers narrow it back to 32 bits: nfs4_ff_layout_calc_dss_id() divides with do_div(), which casts the divisor, and ff_layout_pg_test() copies it into a u32 first. A stripe_unit that does not fit is silently truncated, so the client stripes on a unit the server did not specify -- or divides by zero, if the low 32 bits happen to be clear. Divide by the full value, with div64_u64() and div64_u64_rem(). | ||||
| CVE-2026-99373 | 1 Linux | 1 Linux Kernel | 2026-11-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: NFS/localio: detect a short read or write before the iterator has moved nfs_local_call_read() and nfs_local_call_write() issue a misaligned DIO as up to three segments and must stop at the first short one, or the next segment lands at the wrong file offset. They test for that by comparing the bytes transferred against iov_iter_count() of the segment, read after read_iter() or write_iter() has advanced the iterator, when the count is the residual rather than the request: before the call: count == expected after the call: count == expected - status The test is therefore status < expected - status, and it fires only when less than half of the segment was transferred. A short I/O that covers between 50% and 99% of a segment slips through: the loop moves on with ki_pos advanced by the short amount, the next segment is issued at the wrong offset, and the header's byte count is over-reported to the caller. A write that slips through also never sets NFS_CONTEXT_WRITE_SYNC, which is what makes the writes that follow a short one synchronous. Take the segment's count before issuing it and compare against that. This is the same defect that commit 250ec14932d5 ("nfsd: fix partial-write detection in nfsd_direct_write") fixed in NFSD's version of this loop. | ||||
| CVE-2026-99372 | 1 Linux | 1 Linux Kernel | 2026-11-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: NFSD: cap the number of listeners accepted in listener_set nfsd_nl_listener_set_doit() matches each requested listener against the existing set. The nested loop that does this is O(N * M), where N is the requested count and M is the existing count. The loop runs under sv_lock with bottom halves disabled. A userland request with a very large listener list can therefore spin in atomic context for a long time. Reject a request that carries more than NFSD_NL_LISTENER_MAX (1024) entries. The check goes in nfsd_nl_validate_listeners(), before the code takes any lock. The limit is far above any realistic configuration. This patch does not cap M. Only the message size bounded N; real sockets bound M. A listener_set result set is the requested set, so that path also holds M at the cap, but __write_ports_addxprt() adds two listeners per call and removes none, so repeated calls can push M past it. The worst case under sv_lock is therefore 1024 * M, plus 1024 nla_parse_nested() calls. Both interfaces require CAP_NET_ADMIN. | ||||
| CVE-2026-99371 | 1 Linux | 1 Linux Kernel | 2026-11-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: nfsd: clear XDR padding in GETXATTR replies nfsd4_vbuf_to_stream() uses a raw memcpy() for the first fragment of an attribute value. xdr_reserve_space() aligns the reservation but does not initialize the extra bytes. If the complete value fits in that fragment, the loop that clears padding for the final fragment is never entered. A remote client reading an attribute whose length is not a multiple of four can therefore receive one to three stale bytes from the response page. Encode the first fragment with xdr_encode_opaque_fixed(), matching the final-fragment path and ensuring that any XDR padding is zeroed. | ||||