Export limit exceeded: 398494 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 398494 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (398494 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-98071 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net/rds: clear cp_flags bits individually in rds_conn_path_reset() rds_conn_path_reset() wipes the whole flag word with a plain cp->cp_flags = 0 store. Every other accessor of that word uses atomic bitops, and some of them can run concurrently with the reset: RDS_LL_SEND_FULL is set from rds_send_xmit() and cleared from the transport completion paths, neither of which holds anything that excludes the shutdown worker. A plain store racing an atomic read-modify-write on the same word is a data race, and whichever side loses has its update silently discarded. Clear the two bits the reset is actually responsible for instead. RDS_IN_XMIT and RDS_RECV_REFILL need no store at all here: they belong to the caller, rds_conn_shutdown(), which waits for both to be clear before calling the transport shutdown and this reset. This also gives every bit in cp_flags a single well-defined writer discipline, which the following patches rely on when they turn RDS_IN_XMIT and RDS_RECV_REFILL into bit locks held across the teardown: a blanket store mid-teardown would destroy lock ownership that an atomic clear preserves. Oracle UEK carries the same conversion ("net/rds: Preserve essential connection state flags"), motivated by its asynchronous shutdown state machine, whose progress and destroy flags must survive the reset. UEK's variant also clears RDS_IN_XMIT and RDS_RECV_REFILL because there the reset runs as the final step of a teardown that owns both bits, making those clears its unlock. Upstream that release belongs in rds_conn_shutdown(): once a later patch in this series turns the two bits into locks held across the teardown, ending ownership needs release semantics and a wake-up that a plain clear inside the reset would not provide. Based on Oracle UEK commit "net/rds: Preserve essential connection state flags" by Gerd Rausch. | ||||
| CVE-2026-98072 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net/rds: use wq_has_sleeper() in release_in_xmit() release_in_xmit() clears RDS_IN_XMIT with clear_bit_unlock() and then checks waitqueue_active() to decide whether anyone needs waking. clear_bit_unlock() is only a release operation: it orders the critical section before the bit clear, but does not order the subsequent plain load of the wait queue head after it. The waiter side does the mirror image - it adds itself to the wait queue and then tests the bit. That is the classic store-buffering pattern: the releasing CPU can read the wait queue as empty while the waiting CPU still reads the bit as set, so the sleeper is never woken. The waiters are rds_conn_shutdown() and rds_tcp_reset_callbacks(), both in uninterruptible wait_event() with no timeout. A lost wake-up strands the shutdown worker on its single-threaded workqueue until some other sender releases the bit again - and on a connection that is being torn down precisely because it failed, there may never be another sender. The barrier used to be there: release_in_xmit() did clear_bit() followed by smp_mb__after_atomic() until commit 1422f28826d2 ("rds: introduce acquire/release ordering in acquire/release_in_xmit()") folded both into clear_bit_unlock(), which strengthened the lock hand-off but silently dropped the full barrier the wake-up check depends on. The refill counterpart, release_refill() in net/rds/ib_recv.c, still carries its smp_mb__after_atomic() for exactly this reason. Use wq_has_sleeper(), which is waitqueue_active() preceded by the required full barrier. | ||||
| CVE-2026-98074 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: bonding: do not clear curr_active_slave prematurely when releasing all slaves When releasing all slaves during bond destruction (all == true), __bond_release_one() unconditionally clears bond->curr_active_slave to NULL in every iteration. If a backup slave is released before the active slave, bond_alb_deinit_slave() triggers rlb_teach_disabled_mac_on_primary(), which increments the active slave dev promiscuity counter and sets bond_info->primary_is_promisc = 1. Because bond->curr_active_slave was prematurely cleared to NULL when releasing the backup slave, the subsequent iteration releasing the active slave evaluates oldcurrent as NULL, so bond_change_active_slave(bond, NULL) is skipped. Consequently, bond_alb_handle_active_change() is never called to decrement the promiscuity counter, permanently leaking promiscuous mode on the physical device after bond teardown. When oldcurrent == slave, bond_change_active_slave(bond, NULL) already sets bond->curr_active_slave to NULL. We only need to avoid selecting a new active slave when all == true. Replace the if (all) branch with if (!all && oldcurrent == slave). | ||||
| CVE-2026-95834 | 1 Kovidgoyal | 1 Kitty | 2026-09-25 | N/A |
| Use After Free in the drag source path of the drag and drop protocol in kitty from 0.47.0 before 0.49.0 allows a program writing to the terminal to cause the terminal to read from and write to freed heap memory, because drag_remote_file_data() in kitty/dnd.c holds a DragRemoteItem pointer into an array it does not own, calls toplevel_data_for_drag() or subdir_data_for_drag(), and then continues to use that pointer. Those helpers, and add_payload() and populate_dir_entries() which they call, report errors through the abrt() macro, which expands to cancel_drag() followed by a plain return, and cancel_drag() calls drag_free_offer(), which frees the array the pointer refers to. The helpers return void, so the caller receives no indication that the teardown happened, and proceeds to call all_children_complete() on the freed pointer, which dereferences it, and then to write through it. That dereference is guarded by a local flag that is set when the request carries no payload and announces no further data, which is the same condition that selects the finalisation block of add_payload(), so the error paths in that block reach it: a create that fails because an entry of the same name already exists, because the client may declare two entries with one name and the create operations use O_CREAT with O_EXCL and symlinkat(), a mkdirat() failure other than EEXIST, and the directory entry allocation paths. Both branches reach it. In the top level branch the caller's pointer is never cleared, so clearing the owning structure's own pointers during teardown does not help. In the sub directory branch subdir_data_for_drag() sets the caller's pointer to NULL on entry and assigns it only after its own last error path, so its own aborts leave the caller with NULL and are stopped by a null check, but it then calls add_payload() with that pointer set, and an abort there leaves the caller holding a freed child node inside the item tree, which drag_free_offer() frees by recursion. This results in undefined behaviour in the terminal process, reachable from the byte stream of any program running in the window. | ||||
| CVE-2026-97737 | 1 Muety | 1 Wakapi | 2026-09-25 | 7.4 High |
| In Wakapi before 2.17.6, the user caching service allows a lookup to be resolved in an unintended lookup context, leading to account takeover. | ||||
| CVE-2026-97731 | 1 Minio | 1 Minio | 2026-09-25 | 7.1 High |
| MinIO through 7aac2a2 does not verify that every x-amz-* header present on a request also appears in the client-supplied X-Amz-SignedHeaders list. extractSignedHeaders() in cmd/signature-v4-utils.go iterates only the claimed list and never enumerates the headers that actually arrived, and thus a header that arrives unsigned is neither hashed into the canonical request nor rejected. Because cmd/api-router.go dispatches CopyObject on the presence of x-amz-copy-source alone, the holder of a presigned PUT URL scoped to a single object can add that header to the unmodified URL and cause a server-side copy, executed as the signer, of any object the signing key can read. A grant to write one object becomes a read of every bucket that key can reach. Amazon S3 rejects the equivalent request with HTTP 403 AccessDenied. The minio/minio GitHub repository was archived in April 2026; pgsty/silo before 1233254 is also affected. | ||||
| CVE-2026-97646 | 1 Ningzichun | 1 Student-management-system | 2026-09-25 | 7.3 High |
| A weakness has been identified in ningzichun student-management-system up to 98760f5711cf6dc8b4adca53a9e207ca49b02ebf. This affects an unknown function of the file admin/fun/getStudent.php. This manipulation of the argument sid causes authorization bypass. The attack is possible to be carried out remotely. The exploit has been made available to the public and could be used for attacks. The project was informed of the problem early through an issue report but has not responded yet. | ||||
| CVE-2026-92289 | 2026-09-25 | N/A | ||
| Lemonldap::NG::Portal versions from 2.23.0 before 2.23.4 for Perl allow a PKCE bypass for public Relying Parties in "PKCE or secret" mode because checkEndPointAuthenticationCredentials does not verify the client secret. With oidcRPMetaDataOptionsRequirePKCE set to 2, the authorization endpoint issues a code even when the request carries no code_challenge, and token() admits the exchange as long as a challenge was stored or an authentication method was returned for the caller. checkEndPointAuthenticationCredentials() skips the secret comparison for a Relying Party marked public and still returns the method deduced from the request, so any Basic or form credential satisfies the secret branch. validatePKCEChallenge() then passes, because neither a challenge nor a verifier is present. An attacker who intercepts an authorization code issued to a public Relying Party can exchange it for the user's access, ID and refresh tokens by replaying the client_id with an arbitrary secret, which is the attack PKCE prevents. Dynamic client registration creates every Relying Party in this mode. | ||||
| CVE-2026-92288 | 2026-09-25 | 9.1 Critical | ||
| Lemonldap::NG::Portal versions from 2.20.0 before 2.21.6, from 2.22.0 before 2.23.4 for Perl allow unauthenticated OAuth2 token introspection because checkEndPointAuthenticationCredentials does not verify the client secret of a public Relying Party. checkEndPointAuthenticationCredentials() skips the secret comparison for a Relying Party marked public and still returns the authentication method deduced from the request, client_secret_basic or client_secret_post. introspection() rejects a caller only when that method is missing or none, so a request carrying a public client_id and an arbitrary or empty secret passes the endpoint's authentication check. An attacker who holds an access token and knows the client_id of any public Relying Party can confirm the token is active and read its metadata, including scope, audience, expiry and the sub claim. The sub claim is computed with the calling Relying Party's user identifier attribute, so an attacker can translate a user identifier from one Relying Party to another, defeating per-client and pseudonymous identifiers. | ||||
| CVE-2026-85417 | 1 Brocade | 1 Sannav | 2026-09-25 | N/A |
| Incomplete property masking in the SANnav logging subsystem permits SNMP authentication and privacy passwords to be recorded in application logs under specific configuration conditions. Individuals with read access to system logs or support bundles can retrieve these credentials, leading to unauthorized read or management access to monitored switch environments | ||||
| CVE-2026-98031 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: nexthop: Initialize extack in remove_nh_grp_entry() remove_nh_grp_entry() prints the extack message when a listener fails to replace the reduced nexthop group. However, extack is not initialized and listeners are not required to set a message when returning an error. Neither netdevsim nor mlxsw do so when an allocation fails, resulting in the dereference of an uninitialized stack pointer. Fix by zero-initializing extack, as was done in commit 6347c5314cee ("nexthop: initialize extack in nh_res_bucket_migrate()"). | ||||
| CVE-2026-98078 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ipvs: fix reversed sequence option serialization hton_seq() expects the host-order source first and the unaligned network-order destination second. The version 1 sync sender passes these arguments in reverse for both sequence blocks. This leaves 24 bytes of the kmalloc-backed message unwritten. It may disclose stale heap data and replace the live connection sequence state with values read from the buffer. Pass the connection sequence state as the source and the message payload as the destination for both blocks. | ||||
| CVE-2026-98081 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: zoned: finish active block group cleanup if call_zone_finish() fails do_zone_finish() clears BLOCK_GROUP_FLAG_ZONE_IS_ACTIVE before finishing the zones. If call_zone_finish() then fails it returned early, leaving the now inactive block group on fs_info->zone_active_bgs, leaking its reference, the BTRFS_FS_NEED_ZONE_FINISH waiters are never woken, and as its alloc_offset equals the zone capacity btrfs_zone_finish_one_bg() keeps selecting it, spinning btrfs_zoned_activate_one_bg(). Fall through to the cleanup on failure too and return the error, but keep the block group read-only as its zones are left inconsistent. | ||||
| CVE-2026-98083 | 1 Linux | 1 Linux Kernel | 2026-09-25 | 7 High |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: fix transaction use-after-free in raid stripe insertion If allocation of a RAID stripe extent fails, btrfs_insert_one_raid_extent() aborts and ends the transaction before returning -ENOMEM. btrfs_finish_one_ordered(), the production caller through btrfs_insert_raid_extent(), still owns the transaction handle. It handles the error by aborting the transaction and then reaches the common exit path, which ends the transaction again. The premature end can free the handle and drop its transaction reference. Transaction cleanup can then free the transaction before the caller's second abort accesses the handle and transaction, resulting in use-after-free. Keep the abort at the failure site, but let the caller's common exit path end the transaction once, after it has finished using both objects. | ||||
| CVE-2026-98084 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: bpf: backtracking shouldn't clear outer frame R1-R5 for callbacks When processing calls to bpf_loop() verifier marks R1 (and R4) as precise. R1 tracks loop iterations number and because of the 'callback_depth < R1' mechanics in check_helper_call() must be marked precise. However, precision propagation for R1 was broken, when bpf_loop() call was verified on a second iteration. Consider the following verification trace: - main: bpf_loop(nr_loops, callback ...) - callback: BPF_EXIT - main: bpf_loop(nr_loops, callback ...) - ... While the first visit of the call to bpf_loop() propagated R1 precision as expected, the second call to mark_chain_precision() in the check_helper_call() set R1, but it was immediately reset when backtrack_insn() processed preceding BPF_EXIT in the loop deleted in this patch. Because of that, the second visit of the call to bpf_loop() injected checkpoint with R1 not marked as precise. Which could trick the verifier into accepting unsafe programs. See the next patch for an example of such program. Commit is structured in a way to minimize conflicts when 'bpf' would be eventually merged with 'bpf-next'. | ||||
| CVE-2026-98086 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: ump: do not touch legacy_rmidi before it exists snd_ump_parse_endpoint() sets ump->parsed on every exit, including error, before the caller attaches the legacy rawmidi device. ump_handle_ep_name_msg() then treats parsed as "legacy_rmidi is live" and calls ump_legacy_set_rawmidi_name(), which snprintf()s into ump->legacy_rmidi->name. If a UMP packet arrives in that window (IRQ path from snd_ump_receive), legacy_rmidi is still NULL (KASAN null-ptr-deref in snprintf). Guard the legacy helpers. parsed only means endpoint info was parsed, not that legacy_rmidi exists. | ||||
| CVE-2026-98088 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: scsi: mpt3sas: Avoid out-of-bounds cpumask_of_node() call in _base_assign_reply_queues() dev_to_node() can return NUMA_NO_NODE (-1) on systems without NUMA topology information for the PCI device, such as single-socket boards that don't expose device-to-node affinity. Passing -1 directly into cpumask_of_node() indexes node_to_cpumask_map[-1], an out-of-bounds array read caught by UBSAN: UBSAN: array-index-out-of-bounds in arch/x86/include/asm/topology.h:72:28 index -1 is out of range for type 'cpumask *[1024]' Fall back to cpu_online_mask when no NUMA node is available, rather than assuming dev_to_node() always returns a valid node index. | ||||
| CVE-2026-98089 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: bonding: alb: fix uninitialized transport header access in alb_determine_nd() alb_determine_nd() uses icmp6_hdr(skb) to inspect ICMPv6 headers. However, in xmit paths (e.g. packets sent via AF_PACKET / raw sockets or forwarded packets), skb->transport_header is not guaranteed to be initialized. While pskb_network_may_pull() ensures the packet data is linear starting from the network header, it does not set or adjust the transport header offset. Dereferencing icmp6_hdr(skb) can therefore access out-of-bounds memory. Fetch the icmp6hdr directly after ipv6hdr following pskb_network_may_pull(), and reload ipv6hdr in case pskb_may_pull() reallocated skb->head. Also remove the unused bond argument from alb_determine_nd(). | ||||
| CVE-2026-98093 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: fsl_micfil: balance mclk enable/disable hw_params() enables mclk unconditionally and hw_free() disables it unconditionally, but the PCM core does not guarantee 1:1 pairing: hw_free() can run without hw_params(), and hw_params() can be called multiple times from the SETUP state. This triggers an "already disabled" WARN() in the first case and leaks an enable reference in the second, leaving the clock ungateable. Guard both sides with the existing mclk_flag, as fsl_sai.c does with mclk_streams. | ||||
| CVE-2026-98094 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: staging: fbtft: make dirty_lock IRQ-safe fbtft_mkdirty() can be reached from the fbcon rendering path while processing printk() in hardirq context. Meanwhile, dirty_lock is also taken by fbtft_deferred_io() in workqueue context with local interrupts enabled. Lockdep reports a possible IRQ lock inversion involving dirty_lock and console_owner. A hardirq can interrupt a CPU holding dirty_lock and enter the console rendering path, which can attempt to acquire dirty_lock again. The following lockdep report was observed on an RK3566 system with CONFIG_PROVE_LOCKING enabled: WARNING: possible irq lock inversion dependency detected swapper/2/0 just changed the state of lock: (console_owner){-...}-{0:0} but this lock took another, HARDIRQ-unsafe lock in the past: (&par->dirty_lock){+.+.}-{2:2} CPU0 CPU1 ---- ---- lock(&par->dirty_lock); local_irq_disable(); lock(console_owner); lock(&par->dirty_lock); <Interrupt> lock(console_owner); *** DEADLOCK *** Use spin_lock_irqsave() for fbtft_mkdirty() and spin_lock_irq() for fbtft_deferred_io(). They only access the dirty line range, so the IRQ-off regions remain short. | ||||