Export limit exceeded: 24446 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (24446 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-90155 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: detach blocked lock requests before freeing A file_lock retained by ksmbd for byte-range lock bookkeeping can still be part of the VFS blocked-request graph. In particular, the VFS can chain a new waiter below an already blocked request through flc_blocked_requests. The ksmbd_file reference count does not cover that graph. Both __ksmbd_close_fd() and the cross-request unlock path free these retained file_lock objects directly. If a dependent waiter is still attached, locks_release_private() hits BUG_ON(!list_empty(&flc->flc_blocked_requests)). The same lifetime mismatch can leave a freed ksmbd_lock reachable through its request-local llist. Detach the file_lock from the blocked-request graph before freeing it in the close, cross-request unlock, and rollback paths. locks_delete_block() also wakes requests chained below the object. Remove llist when a completed lock is published so a globally visible ksmbd_lock no longer points into the submitting worker's stack. | ||||
| CVE-2026-90154 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: scope session state changes to bound connections ksmbd_all_conn_set_status() treats every connection whose transient binding flag is set as belonging to the target SessionId. A logoff or session replacement can consequently move an unrelated connection to NEED_RECONNECT or NEED_SETUP. Pass the target session itself and select connections using either the connection-local session xarray or the session's permanent channel list. Use the same association test while waiting for requests to drain. Serialize session-wide status changes under request_lock and do not overwrite EXITING or RELEASING. Protect the shutdown transition with the same lock so a concurrent session update cannot revive a closing connection. | ||||
| CVE-2026-90152 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: smb/server: fix session leak in ksmbd_session_register() See the procedure below: smb2_sess_setup ksmbd_smb2_session_create __session_create atomic_set(&sess->refcnt, 2) hash_add(sessions_table, &sess->hlist, sess->id) ksmbd_session_register xa_store(&conn->sessions, sess->id, sess) // fail ksmbd_user_session_put atomic_dec(&sess->refcnt) // refcnt is 1, session is not freed Remove the session from sessions_table and drop its table reference if xa_store() fails. | ||||
| CVE-2026-90150 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: pnfs/blocklayout: Fix device leaks on parse failure bl_parse_concat() and bl_parse_stripe() allocate a child device array and then parse each child in turn. If parsing a child fails, the failed child is not counted in nr_children and the parent may be left with a children array that bl_free_device() will not release when nr_children is zero. Release the failed child and the already parsed children before returning the error. Also make bl_free_device() release the child array whenever the children pointer is set, so that partially initialised concat or stripe devices are cleaned up correctly. bl_parse_scsi() can also fail after assigning d->bdev_file and dropping the file reference. Clear the pointer after fput() so that an outer cleanup path does not put it again. | ||||
| CVE-2026-90148 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: NFSv4: Fix incorrect argument passed to nfs4_delete_lease() in nfs4_add_lease() When nfs4_add_lease() races with a delegation return, it calls nfs4_delete_lease() to clean up. Previously, it passed priv, which can legitimately be NULL. Passing a NULL priv eventually leads to a NULL pointer dereference in generic_setlease(). | ||||
| CVE-2026-90147 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: clk: devres: fix cleanup in devm_clk_get_optional_enabled_with_rate() devm_clk_get_optional_enabled_with_rate() registers its cleanup action before setting the clock rate. If setting the rate fails, it attempts to disable and unprepare a clock that was never enabled. This issue was spotted while reviewing "rust: clk: add devres-managed clks" [1]. Register the cleanup action only after successfully preparing and enabling the clock. [1]: https://lore.kernel.org/rust-for-linux/20260706-clk-type-state-v5-3-67c5f326a16c@collabora.com | ||||
| CVE-2026-90144 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: dpll: fix NULL deref in dpll_device_ops() during teardown race When the last owner of a dpll device unregisters while a foreign driver still holds a pin on it via dpll_pin_on_pin_register(), the dpll object stays alive with an empty registration list. A pin notification queued before the unregister (e.g. ice reacting to zl3073x_i2c removal) then walks pin->dpll_refs into dpll_device_ops(), which trips the WARN_ON and dereferences the missing registration. dpll_lock cannot help because the notification work was queued before the unregistering driver took the lock. Treat the empty registration list as a legitimate transient state. Make dpll_priv() and dpll_device_ops() return NULL in that case and make every pin netlink path that resolves a device from a pin skip such dplls. dpll_cmd_pin_get_one() picks a ref with a live registration and returns -ENODEV when there is none, the pin dumpit skips such a pin instead of aborting the dump, dpll_msg_add_pin_dplls() and the frequency, esync, reference sync and phase adjust set paths skip dead refs, and dpll_pin_parent_device_set() validates the parent with dpll_device_get_by_id(). dpll_pin_register() is the last caller that dereferenced the device ops without a check, so move its frequency monitor validation under dpll_lock and tolerate a missing registration there as well. The empty registration list is equivalent to a cleared DPLL_REGISTERED mark, both transitions happen under dpll_lock in dpll_device_register() and dpll_device_unregister(). A pin notification for a pin whose dplls are all gone is now dropped with -ENODEV instead of crashing, all callers in the core ignore that return value. WARNING: drivers/dpll/dpll_core.c:1092 at dpll_device_ops+0x24/0x40, CPU#83: kworker/u576:3/23471 Modules linked in: ... ice ... zl3073x_i2c(-) ... zl3073x ... Workqueue: ice_dpll_wq ice_dpll_pin_notify_work [ice] RIP: 0010:dpll_device_ops+0x24/0x40 Call Trace: <TASK> dpll_cmd_pin_get_one+0x336/0x520 dpll_pin_event_send+0x82/0x140 dpll_pin_on_pin_unregister+0xbb/0x160 ice_dpll_pin_notify_work+0x1bc/0x1f0 [ice] process_one_work+0x19e/0x370 worker_thread+0x1a6/0x310 kthread+0xe4/0x120 ret_from_fork+0x1a1/0x270 ret_from_fork_asm+0x1a/0x30 </TASK> ---[ end trace 0000000000000000 ]--- BUG: kernel NULL pointer dereference, address: 0000000000000010 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page | ||||
| CVE-2026-90140 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: cuse: wait for pending RCU callbacks on module exit Since commit 053fc4f755ad ("fuse: fix UAF in rcu pathwalks"), fuse_conn_put() frees the fuse_conn through call_rcu() rather than synchronously. For cuse, fc->release is cuse_fc_release(), which lives in the cuse module. If the module is removed before the RCU grace period ends, the callback jumps into freed module memory: userspace / module unload | RCU softirq ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ close(/dev/cuse) | cuse_channel_release() | fuse_dev_release() | fuse_conn_put(fch->conn) | call_rcu(delayed_release) ------+---> callback queued | rmmod cuse | cuse_exit() | cuse_channel_destroy() | ... | return | | <module text freed> | | rcu_do_batch() | delayed_release() | fc->release() | -> cuse_fc_release() | ^^^ freed text! The freed module text is unmapped by vfree(), so the jump into the stale callback triggers a page-fault Oops. If the virtual address is subsequently reused, the callback could execute unrelated code (undefined behaviour). Fix this by calling rcu_barrier() in cuse_exit() so that any pending fuse_conn release callback completes before the module is removed. | ||||
| CVE-2026-90139 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: fuse: check for NULL root inode in fuse_fill_super_submount fuse_iget() can return NULL when its inode allocation fails, but fuse_fill_super_submount() passed the result straight to get_fuse_inode() and decremented fi->nlookup without checking it: root = fuse_iget(sb, parent_fi->nodeid, ...); fi = get_fuse_inode(root); fi->nlookup--; Inside fuse_iget() the inode allocation can fail and return NULL. The submount root takes the iget5_locked() path, whose alloc_inode() can fail under memory pressure (the auto-submount branch can fail the same way in new_inode() or fuse_alloc_submount_lookup()): inode = iget5_locked(sb, nodeid, fuse_inode_eq, fuse_inode_set, &nodeid); if (!inode) return NULL; A NULL root makes get_fuse_inode() a container_of() on NULL and the nlookup decrement a write to a bogus address, oopsing the mount. With CONFIG_KASAN the following null pointer dereference is reported when the root inode allocation of an auto-submount fails (e.g. under memory pressure): ================================================================== BUG: KASAN: null-ptr-deref in fuse_get_tree_submount+0x656/0x8b0 Read of size 8 at addr 00000000000002b0 by task ls/942 CPU: 0 PID: 942 Comm: ls Tainted: G W 6.6 #15 Call Trace: <TASK> fuse_get_tree_submount+0x656/0x8b0 vfs_get_tree+0x48/0x140 fc_mount+0x13/0x50 fuse_dentry_automount+0x7a/0xb0 __traverse_mounts+0xca/0x330 step_into+0x339/0xac0 path_lookupat+0xc5/0x2f0 filename_lookup+0x163/0x2a0 vfs_statx+0xd5/0x200 do_statx+0x83/0xd0 __x64_sys_statx+0xa0/0xc0 do_syscall_64+0x37/0x90 entry_SYSCALL_64_after_hwframe+0x78/0xe2 </TASK> ================================================================== Return -ENOMEM instead; the caller tears down the partially built superblock on error, matching the other error returns in this function. | ||||
| CVE-2026-90128 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: vdpa/mlx5: fix wrong list iterated in add_direct_chain error path In add_direct_chain(), newly allocated direct MR entries are added to the local list 'tmp', which is spliced into mr->head only on success. On the error path, the cleanup loop was incorrectly iterating over mr->head instead of tmp. Fix by iterating over 'tmp' in the err_alloc cleanup path. | ||||
| CVE-2026-90127 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: virtio: rtc: time out alarm requests RTC class operations run with rtc_device.ops_lock held. The virtio RTC alarm requests currently wait without a timeout for the device to return their requestq buffers. On surprise removal, virtio-pci marks the virtqueues broken before unregistering the virtio device. If an alarm request is waiting when the device stops responding, viortc_remove() blocks in viortc_class_stop() while trying to acquire ops_lock. The request cannot complete and device removal hangs until the waiting task is signalled. Use the same 60-second timeout as clock read requests for alarm reads, alarm programming, and alarm interrupt enable requests. The existing message reference counting keeps a timed-out request alive until a late response or device teardown. | ||||
| CVE-2026-90126 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: rtc: pcf8563: fix clock provider leak on unbind pcf8563_clkout_register_clk() registers the CLKOUT clock provider with of_clk_add_provider(), but nothing ever unwinds it: there is no of_clk_del_provider() call and the driver has no remove callback. Each of_clk_add_provider() allocates a struct of_clk_provider, takes a reference on the OF node and adds an entry to the global of_clk_providers list, none of which is released when the device is unbound. Every bind/unbind (or module reload) therefore leaks a provider structure and an of_node reference. The clock itself is already device-managed (devm_clk_register()); only the provider registration was not. Use devm_of_clk_add_hw_provider() so the provider is removed automatically on unbind. Tie it to the parent i2c device, whose OF node carries the #clock-cells and clock-output-names properties (the RTC class device has no OF node of its own). | ||||
| CVE-2026-90124 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: irqchip/renesas-rzg2l: Fix loss of interrupt rzg2l_clear_irq_int() and rzg2l_clear_tint_int() perform a read-modify-write on the ISCR/TSCR status registers to clear the bit for the interrupt just handled. Since these registers are write-0-to-clear per bit, this is racy: If another interrupt's status bit gets set between the read and the write, that bit is written back as 0 by the software-constructed value, clearing an interrupt that hasn't been serviced yet and losing it. This can be reproduced by triggering multiple interrupts at once, e.g.: gpioset -c gpiochip0 355=0 353=0 328=0 352=0 Fix this by writing back only the bit being cleared, with all other bits set to 1, instead of read-modify-writing the whole register. Since 1-bits are left unchanged by hardware, concurrently-set status bits for other interrupts are preserved. | ||||
| CVE-2026-90122 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: clk: visconti: Make sure clk_init_data is fully initialized The clk_init_data structure contains several mutually-exclusive members for different methods to specify the possible parents of a clock, prompting drivers to initialize only the members they need. However, not initializing all members may cause subtle issues, which are only exposed when CONFIG_INIT_STACK_ALL_PATTERN or CONFIG_INIT_STACK_NONE is enabled. visconti_clk_register_gate() fills in init.parent_data, and assumes that init.parent_names is NULL. However, the latter in uninitialized, and thus may cause a crash. Make sure all members are fully initialized, to fix such bugs, and to avoid future breakage when converting drivers to a different method for specifying the parents. | ||||
| CVE-2026-90121 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: irqchip/gic-v5: Clear per-CPU IRS data on teardown IRS affinity setup publishes an IRS pointer and IAFFID state in the per-CPU data before the remaining IRS initialization can fail. The error path then frees the IRS data without clearing that published state, leaving CPUs associated with freed memory. On initialization failure and normal IRS teardown, clear the per-CPU IRS association by removing the stale pointer to irs_data. Also invalidate the per-CPU IAFFID state for any CPUs that were tied to the IRS before it was freed. | ||||
| CVE-2026-90119 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: ice1712: Fix the card leak at probe error with the auto-cleanup snd_ice1712_probe() performs multiple initialization steps after snd_card_new(), but directly returns on failures from later steps without releasing the ALSA card, causing resource leaks when probing fails. Use snd_devm_card_new() together with scope-based cleanup via __free(snd_card_unref), and clear the card pointer after successful registration to keep it alive. | ||||
| CVE-2026-90117 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ntfs: validate usa_ofs before preserving the update sequence number When ntfs_mft_record_alloc() reuses a free mft record it reads the old update sequence number straight from the on-disk record: usn = *(__le16 *)((u8 *)m + le16_to_cpu(m->usa_ofs)); Here m points into the raw $MFT page-cache folio, which still holds unvalidated, MST-protected bytes: the folio is read by a plain iomap_read_folio() and neither post_read_mst_fixup() nor ntfs_mft_record_check() has run on it (both work on private copies). m->usa_ofs is therefore an untrusted u16, and a corrupted record can put it past the end of the record so the two-byte read lands outside the folio. Reading such a record while creating a file gives, under KASAN: BUG: KASAN: use-after-free in ntfs_mft_record_alloc+... Read of size 2 at addr ... ntfs_mft_record_alloc -> __ntfs_create -> ntfs_create -> path_openat Only preserve the old update sequence number when usa_ofs is even and in range, mirroring the check ntfs_mft_record_check() already applies; otherwise leave usn zero, which the existing restore below skips. | ||||
| CVE-2026-90114 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: bridge: Reject descending VLAN tunnel ranges A pair of descending VLAN and tunnel IDs can pass the tunnel range span check. The VLAN subtraction produces a negative int, which is converted to unsigned when compared with the u32 tunnel ID subtraction. It can therefore equal the wrapped tunnel ID delta. The range loop then performs no iterations. Since the batched notification handling added a post-loop error check, this leaves err uninitialized and makes the request's return value unpredictable. Reject descending VLAN ranges before comparing the spans. Valid ascending and single-entry ranges remain unchanged, while malformed descending ranges consistently return -EINVAL. This issue was found by a static analysis checker and confirmed by manual source review. | ||||
| CVE-2026-90112 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: qlcnic: validate unified ROM sections before loading The unified ROM parser reads directory, product, and data-descriptor fields from the firmware file. Existing validation forms table and data ends with unchecked additions and multiplications. Malformed values can wrap before they are compared with the firmware size. The parser also dereferences typed pointers at firmware-controlled offsets. Valid descriptor extents alone are insufficient for the consumers. The loader reads a fixed-size bootloader regardless of its declared size, the version parser assumes a 17-byte tail, and a partial final firmware word is read as a full u64. A truncated image can therefore make the driver read beyond the firmware allocation during validation or loading. Replace the pointer-returning parser with bounded range helpers. Validate table entry sizes, descriptor indices, section ranges, the fixed bootloader load length, and the version tail before exposing any section. Read all file fields with unaligned little-endian accessors and assemble a partial final word from only the bytes that remain. Apply the same range checks to the legacy image before reading its fixed fields. | ||||
| CVE-2026-90108 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net/smc: free stashed qentry before overwrite in REQ_ADD_LINK to ADD_LINK transition When smc_llc_event_handler() transitions the local LLC flow from SMC_LLC_FLOW_REQ_ADD_LINK to SMC_LLC_FLOW_ADD_LINK on arrival of an ADD_LINK request, it calls smc_llc_flow_qentry_set() unconditionally: if (lgr->llc_flow_lcl.type == SMC_LLC_FLOW_REQ_ADD_LINK) { lgr->llc_flow_lcl.type = SMC_LLC_FLOW_ADD_LINK; smc_llc_flow_qentry_set(&lgr->llc_flow_lcl, qentry); ... } A CONFIRM_LINK or ADD_LINK_CONT arriving while flow->type is SMC_LLC_FLOW_REQ_ADD_LINK is stashed into flow->qentry via the SMC_LLC_CONFIRM_LINK / SMC_LLC_ADD_LINK_CONT handler (which stores into flow->qentry for any non-NONE flow type). When the subsequent ADD_LINK arrives, the REQ_ADD_LINK branch overwrites flow->qentry with the new pointer without first freeing the stashed allocation, leaking one kmalloc object. The stashed entry has no consumer: smc_llc_wait() is only called from llc_add_link_work, which is not yet scheduled while the flow type remains REQ_ADD_LINK. No waiter is sleeping on llc_msg_waiter at this point. It is safe to unconditionally free any stashed qentry before the overwrite. Call smc_llc_flow_qentry_del() before smc_llc_flow_qentry_set() in the REQ_ADD_LINK branch. smc_llc_flow_qentry_del() already checks flow->qentry before freeing, so the normal path where no entry is stashed is a no-op. | ||||