Export limit exceeded: 395156 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (395156 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-89936 | 1 Linux | 1 Linux Kernel | 2026-09-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: iio: dac: m62332: Fix regulator reference count imbalance m62332_set_value() enables the Vcc regulator on every write of a non-zero value and disables it on every write of zero, without tracking the channel's current state. Because the regulator is reference counted, changing a channel directly from one non-zero value to another enables it more than once, while a later write of zero disables it only once. The reference count never returns to zero and the regulator is left enabled indefinitely. Only enable the regulator on the transition from zero to non-zero, and only disable it on the transition from non-zero to zero, using the previously stored channel value to detect the edge. Balance the regulator on the I2C error path so the reference count stays consistent if the write fails. | ||||
| CVE-2026-92603 | 1 Continew | 2 Admin, Continew Admin | 2026-09-18 | 6.5 Medium |
| ContiNew Admin through 4.1.0 contains an authorization bypass vulnerability in the personal message delete endpoint that allows authenticated users to delete other users' messages and announcements. Attackers can supply arbitrary message identifiers in the IdsReq parameter to remove any message row and purge all recipients' read receipts without ownership validation. | ||||
| CVE-2026-92750 | 1 Harness | 1 Harness | 2026-09-18 | 6.5 Medium |
| Harness through 3.3.0 omits access control validation in the infrastructure provider read endpoint, allowing authenticated users to retrieve provider configurations from spaces they do not belong to. Attackers can query the GET /api/v1/infraproviders endpoint with arbitrary space identifiers to expose sensitive provider metadata including Docker endpoints, TLS certificate paths, and cloud project identifiers. | ||||
| CVE-2026-21822 | 2026-09-18 | 6.3 Medium | ||
| HCLSoftware AppScan 360° was affected by a Path Traversal vulnerability in the ASReportService component. Improper handling of file paths allows an authenticated attacker to read or write files outside the intended directory, potentially enabling file system structure inspection or unauthorized file modification within the application's directory scope. | ||||
| CVE-2026-89852 | 1 Linux | 1 Linux Kernel | 2026-09-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Zero mailbox struct in qla2x00_get_firmware_state() The mbx_cmd_t is allocated on the stack but left uninitialized. qla2x00_mailbox_command() has several early-return paths (PCI permanent failure, device failed, EEH busy, ISP abort pending, mailbox access timeout, purge mbox) that return without writing the input mailbox registers back into mcp->mb[]. qla2x00_get_firmware_state() then unconditionally copies mcp->mb[1..6] (and mb[12]) into the caller's states[] array regardless of the return value. On such a failure the copied values are uninitialized kernel stack memory, which is then exposed to userspace via the fw_state and mpi_fw_state sysfs handlers. Zero the mailbox struct so a failed query yields deterministic zeroed state instead of leaking stack contents. | ||||
| CVE-2026-89854 | 1 Linux | 1 Linux Kernel | 2026-09-18 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Fix cs84xx use-after-free on host teardown qla84xx_put_chip() drops the last reference to ha->cs84xx and frees it via __qla84xx_chip_release() without clearing ha->cs84xx. During teardown it ran before scsi_remove_host(), which is what removes the 84xx_fw_version host sysfs attribute. A concurrent read of that attribute in the window between the two calls executes qla24xx_84xx_fw_version_show(), which dereferences the freed ha->cs84xx, resulting in a use-after-free. Move qla84xx_put_chip() to after scsi_remove_host() in both qla2x00_remove_one() and qla2x00_disable_board_on_pci_error(). Once scsi_remove_host() returns, the sysfs attribute is gone and kernfs has drained any in-flight show(), so no reader can touch cs84xx; the put still runs before the host and ha are freed. | ||||
| CVE-2026-89859 | 1 Linux | 1 Linux Kernel | 2026-09-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Zero dport diagnostics buffer to avoid info leak qla2x00_do_dport_diagnostics() allocates the qla_dport_diag response buffer with kmalloc_obj() (non-zeroing) and, on success, copies the full sizeof(*dd) back to user space via sg_copy_from_buffer(). The inbound sg_copy_to_buffer() only fills as many bytes as the user request payload provides, and qla26xx_dport_diagnostics() zeroes only dd->buf. The options and unused[] fields are therefore copied out uninitialized, leaking kernel heap contents to user space. Allocate with kzalloc_obj(), matching qla2x00_do_dport_diagnostics_v2(). | ||||
| CVE-2026-89860 | 1 Linux | 1 Linux Kernel | 2026-09-18 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Initialize NVMe abort_work once at submission qla_nvme_fcp_abort() and qla_nvme_ls_abort() ran INIT_WORK() on priv->abort_work immediately before schedule_work(). INIT_WORK() reinitializes the work_struct, resetting its list head and clearing the pending bit. If an abort is issued more than once for the same command (for example, concurrent transport teardown and a timeout-driven abort), the second INIT_WORK() reinitializes a work item that is already queued, which can corrupt the workqueue list and lead to crashes or a looping worker. Initialize priv->abort_work once at command submission, next to the existing per-command spin_lock_init(&priv->cmd_lock), and leave only schedule_work() in the abort paths. schedule_work() already does nothing when the work item is still pending, so a repeated abort no longer disturbs an in-flight work item. The command is not returned to the transport until the final kref_put()/release callback runs after abort_work has completed, so the work item is idle before priv is reused and the single submission-time INIT_WORK() is safe. | ||||
| CVE-2026-89863 | 1 Linux | 1 Linux Kernel | 2026-09-18 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: edif: Fix NULL pointer deref in RX SA delete check qla_chk_edif_rx_sa_delete_pending() obtains the SCSI command via GET_CMD_SP(sp) and immediately dereferences cmd->sc_data_direction. That command pointer can be NULL: the firmware may post a status completion for a command that has already been returned or aborted. The caller qla2x00_status_entry() acknowledges this on the very same status path, re-fetching GET_CMD_SP(sp) and bailing out with the "Command already returned" message when it is NULL -- but that check runs only after qla_chk_edif_rx_sa_delete_pending() has already dereferenced the pointer, so a NULL cmd crashes the kernel in interrupt context. Return early when cmd is NULL, before touching cmd->sc_data_direction. | ||||
| CVE-2026-89866 | 1 Linux | 1 Linux Kernel | 2026-09-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: media: chips-media: wave5: Resume device before setting EOS flag Setting the EOS flag talks to the firmware via send_firmware_command(), which accesses VPU registers. Both the STREAMOFF path (wave5_vpu_dec_job_abort()) and the V4L2_DEC_CMD_STOP path (wave5_vpu_dec_stop()) can run while the device is runtime suspended, so those register accesses hit powered-down hardware and the SoC raises an asynchronous SError, panicking the kernel: SError Interrupt on CPU3, code 0x00000000bf000000 -- SError send_firmware_command+0x2c/0x160 [wave5] wave5_vpu_dec_set_bitstream_flag+0x6c/0x80 [wave5] wave5_vpu_dec_update_bitstream_buffer+0x80/0xec [wave5] wave5_vpu_dec_job_abort+0x44/0xa0 [wave5] v4l2_m2m_cancel_job+0x110/0x19c [v4l2_mem2mem] v4l2_m2m_streamoff+0x24/0x140 [v4l2_mem2mem] Resume the device with pm_runtime_resume_and_get() around the EOS firmware command and release it with pm_runtime_put_autosuspend(), matching the runtime PM handling already done in wave5_vpu_dec_device_run(). | ||||
| CVE-2026-89867 | 1 Linux | 1 Linux Kernel | 2026-09-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: media: chips-media: wave5: Defer job_finish() only when a DEC_PIC was queued Decoder instances sharing a VPU also share one v4l2_m2m job slot, released when the running context calls v4l2_m2m_job_finish(). While draining, device_run() defers job_finish() once EOS is sent (sent_eos), expecting a later finish_decode() (from a DEC_PIC completion IRQ) to release the slot. But the m2m core checks job_ready() only when a job is queued, not when it is dispatched. A job queued while draining can run after finish_decode() has already moved the instance to STOP and sent EOS. device_run() then runs in STOP, issues no DEC_PIC, yet still skips job_finish() - so no IRQ, no finish_decode(), and the shared slot is leaked, stalling every instance. With several v4l2h264dec instances in parallel, GStreamer hangs at EOS. Track whether the run actually queued a DEC_PIC (cmd_issued) and defer job_finish() only then. Otherwise finish the job immediately | ||||
| CVE-2026-89869 | 1 Linux | 1 Linux Kernel | 2026-09-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: media: qcom: iris: use disable_irq() during power-off The IRQ is registered as a threaded IRQ. Using disable_irq_nosync() in iris_vpu_power_off() does not wait for an already queued threaded IRQ handler to complete before returning. As a result, a threaded IRQ handler may still run after the VPU has been powered down and access hardware registers after power-off. Replace disable_irq_nosync() with disable_irq() so the power-off path waits for any in-flight threaded IRQ handler to complete before returning. | ||||
| CVE-2026-89871 | 1 Linux | 1 Linux Kernel | 2026-09-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: media: video-i2c: fix kthread error pointer left in kthread_vid_cap on failure kthread_run() returns an ERR_PTR on failure, not NULL. When start_streaming() fails, data->kthread_vid_cap is left holding this error pointer instead of being cleared. This causes two subsequent bugs: 1. A future call to start_streaming() sees a non-NULL kthread_vid_cap and returns 0 (success) immediately, without actually starting the capture thread. 2. A call to stop_streaming() checks 'kthread_vid_cap == NULL' which is false for an error pointer, and proceeds to call kthread_stop() on the error pointer, leading to a kernel crash. Fix this by resetting kthread_vid_cap to NULL on failure before jumping to the error path. | ||||
| CVE-2026-89878 | 1 Linux | 1 Linux Kernel | 2026-09-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: media: s2255: check firmware size before reading trailing marker s2255_probe() reads a 4-byte marker and version from the last 8 bytes of the firmware blob (fw->data[fw_size - 8] and [fw_size - 4]). If the firmware file is shorter than 8 bytes, fw_size - 8 underflows and the access reads out of bounds. Validate the firmware size before indexing. | ||||
| CVE-2026-89881 | 1 Linux | 1 Linux Kernel | 2026-09-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: media: rtl2832_sdr: use vb2_video_unregister_device() on remove to fix DMA leak rtl2832_sdr_remove() runs on USB disconnect and clears dev->udev to NULL before any pending streaming teardown has run. When user space later closes its file descriptor, vb2 calls rtl2832_sdr_stop_streaming() which in turn calls rtl2832_sdr_free_stream_bufs(). That helper releases each coherent buffer with: usb_free_coherent(dev->udev, dev->buf_size, dev->buf_list[dev->buf_num], dev->dma_addr[dev->buf_num]); usb_free_coherent() returns immediately when its dev argument is NULL, so every DMA stream buffer that was live at disconnect is silently leaked. The URBs allocated in rtl2832_sdr_alloc_urbs() outlive the device for the same reason. The rtl2832_sdr driver uses vb2_fop_release() in its file_operations, so replace video_unregister_device(&dev->vdev) with vb2_video_unregister_device(&dev->vdev) and move it before clearing dev->udev. vb2_video_unregister_device() releases the vb2 queue, which synchronously runs rtl2832_sdr_stop_streaming() if streaming is active, so URBs and coherent DMA stream buffers are freed while dev->udev is still valid. vb2_video_unregister_device() locks vdev->queue->lock (vb_queue_lock) internally, and stop_streaming() locks v4l2_lock, so the previous outer mutex_lock(&dev->vb_queue_lock) / mutex_lock(&dev->v4l2_lock) pair around the unregister sequence would self-deadlock and has been removed. A short v4l2_lock critical section around dev->udev = NULL remains so any ioctl path that still holds the file descriptor sees coherent state. Issue identified by automated review of the INV-003 series at https://sashiko.dev/ | ||||
| CVE-2026-89952 | 1 Linux | 1 Linux Kernel | 2026-09-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: mtd: rawnand: validate ONFI extended parameter page sections nand_flash_detect_ext_param_page() allocates the length declared by the ONFI parameter page, then treats the data as a fixed header followed by variable-length sections. It reads that header and advances over sections without first proving that the fixed page and each current section fit in the allocation. Reject pages shorter than the fixed header, track the remaining variable area while walking sections, and require the ECC section to contain every field read from struct onfi_ext_ecc_info. Use device-scoped diagnostics that identify the malformed ONFI section. | ||||
| CVE-2026-89969 | 1 Linux | 1 Linux Kernel | 2026-09-18 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: nvmet-tcp: fix out-of-bounds write when receiving an over-long PDU nvmet_tcp_try_recv_pdu() reads a PDU header into the fixed 128-byte queue->pdu union, then computes the remaining payload length as queue->left = hdr->hlen - queue->offset + hdgst; and reads that many more bytes into &queue->pdu + queue->offset, without ever bounding the result against sizeof(queue->pdu). A struct nvme_tcp_icreq_pdu is itself 128 bytes, exactly the size of the union. Once a header digest has been negotiated (hdgst = 4), a second ICReq passes the hlen == nvmet_tcp_pdu_size() check but yields queue->left = 128 - 8 + 4 = 124, so bytes 8..132 are written into the 128-byte buffer -- 4 bytes past its end, over queue->hdr_digest and queue->data_digest. Those bytes are attacker-controlled (an ICReq carries no digest), and the duplicate ICReq is only rejected later, after the overflow. A remote unauthenticated host can thus corrupt kernel memory adjacent to the receive buffer. Reject any PDU whose declared length would read past the end of queue->pdu before the second recv. | ||||
| CVE-2026-89984 | 1 Linux | 1 Linux Kernel | 2026-09-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: perf/x86/intel: Fix kernel address leakages in LBR stack Before Arch LBR gained CPL filtering support, a user-only branch stack could still contain kernel addresses. As a result, kernel branch records may be exposed to user space even when PERF_SAMPLE_BRANCH_USER is requested. For example, on Intel Tiger Lake, the following command can still report SYSRET/ERET entries with kernel-space from addresses: $ ./perf record -e cycles:p -o - --branch-filter any,save_type,u -- \ ./perf bench syscall basic --loop 1000 | \ ./perf script -i - --fields brstack|tr ' ' '\n'| \ grep -E '0x[89a-f][0-9a-f]{15}' Total time: 0.000 [sec] 0.219000 usecs/op 4,566,210 ops/sec [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.551 MB - ] 0xffffffff93c001c8/0x7f12a2b1d647/P/-/-/16959/SYSRET/- 0xffffffff93c001c8/0x7f12a2b1d5c2/P/-/-/17535/SYSRET/- 0xffffffff93c01928/0x7f12a2861000/P/-/-/6719/ERET/- 0xffffffff93c01928/0x7f12a297a000/P/-/-/8575/ERET/- The problem is that intel_pmu_lbr_filter() does not fully validate the privilege level of sampled entries. It filters some mismatches based on the branch type and the to address, but it does not reject entries whose from address violates the requested branch privilege filter. Fix this by extending software filtering to validate both from and to addresses against br_sel. Any LBR entry contains kernel address does not match the requested user filter is dropped. This prevents kernel addresses from appearing in user-only branch stacks. | ||||
| CVE-2026-89992 | 1 Linux | 1 Linux Kernel | 2026-09-18 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: cpuidle: dt_idle_genpd: kfree() the original name allocation dt_idle_pd_alloc() kasprintf()s the full node path, then points pd->name at kbasename() of that string. dt_idle_pd_free() kfree()s pd->name, which is no longer the start of the allocation. Copy the basename instead. | ||||
| CVE-2026-90027 | 1 Linux | 1 Linux Kernel | 2026-09-18 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: usb: typec: qcom-pmic-typec: disable cc_debounce_dwork on stop cc_debounce_dwork is queued from the set_cc() and start_toggling() callbacks, which run from TCPM's kthread worker. port_stop() returns before tcpm_unregister_port() destroys that worker. Flushing the worker during unregister may therefore run a callback which queues the delayed work after port_stop() has returned. The delayed work can then run after devres has freed pmic_typec_port. Use disable_delayed_work_sync() in port_stop() to cancel a pending instance and prevent the TCPM callbacks from queueing another one. This issue was found by an in-house static analysis tool. | ||||