Export limit exceeded: 400457 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (400457 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-97918 | 1 Linux | 1 Linux Kernel | 2026-10-01 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: tracing: Undo the registration when enabling the histogram trigger fails Commit 6f86bdeab633 ("tracing: Fix bad hist from corrupting named_triggers list") described how a trigger that is registered but not on file->triggers ends up freed while still on the global named_triggers list, and moved the registration down so that hist_trigger_enable() follows it immediately. One path still gets there. hist_trigger_enable() adds the trigger and takes it straight back out when the event cannot be enabled: list_add_tail_rcu(&data->list, &file->triggers); update_cond_flag(file); if (trace_event_trigger_enable_disable(file, 1) < 0) { list_del_rcu(&data->list); update_cond_flag(file); ret--; } so the list walk in hist_unregister_trigger() matches nothing, test stays NULL, and the ->free() that would call del_named_trigger() is skipped. out_unreg falls through to out_free, which frees the trigger anyway: BUG: KASAN: slab-use-after-free in find_named_trigger+0xac/0xc0 Read of size 8 at addr ffff8880091d3160 by task init/1 find_named_trigger+0xac/0xc0 hist_register_trigger+0xc1/0xa00 event_hist_trigger_parse+0x3146/0x6af0 event_trigger_write+0xce/0x160 Freed by task 69: kfree+0x154/0x420 trigger_kthread_fn+0xfd/0x160 Leave the trigger where hist_unregister_trigger() can find it and let that undo the registration, which is the only code that knows all of what cmd_ops->init() took: the named list entry, the hist_pad reference, the reference on the trigger a named histogram is shared with, and the copied cmd_ops. It also pairs the failed trace_event_trigger_enable_disable(), whose sm_ref and buffered event reference are otherwise left behind. Since ->free() releases trigger_data and, for a trigger that does not share its histogram, hist_data with it, out_unreg can no longer fall through to out_free. For a trigger that does share, hist_register_trigger() has already destroyed the caller's hist_data, so the fall-through was reading freed memory there as well. Move the enable_timestamps check in hist_unregister_trigger() above the ->free() call for the same reason: hist_data does not outlive it once the trigger being removed is the one that owns it. | ||||
| CVE-2026-97920 | 1 Linux | 1 Linux Kernel | 2026-10-01 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: tracing: Keep the entry count when the histogram stats allocation fails print_entries() uses n_entries both as the number of sort entries and as its own return value, so the -ENOMEM it stores when the stats allocation fails overwrites the count that the cleanup still needs: n_entries = tracing_map_sort_entries(map, ...); if (n_entries < 0) return n_entries; ... if (!stats) { n_entries = -ENOMEM; goto out; } ... out: tracing_map_destroy_sort_entries(sort_entries, n_entries); tracing_map_destroy_sort_entries() takes an unsigned int and loops up to it, so -ENOMEM arrives as 4294967284. It walks an array of at most map->max_elts pointers and calls destroy_sort_entry(), which dereferences and frees, on whatever lies past the end. Reading the hist file of a trigger with a .percent value, with that allocation forced to fail: BUG: KASAN: vmalloc-out-of-bounds in tracing_map_destroy_sort_entries+0xa0/0xb0 Read of size 8 at addr ffffc90000045000 by task init/1 tracing_map_destroy_sort_entries+0xa0/0xb0 hist_show+0x6f7/0x1df0 seq_read_iter+0x2b8/0x1190 vfs_read+0x176/0xa40 The buggy address belongs to a 4-page vmalloc region starting at ffffc90000041000 allocated at tracing_map_sort_entries+0x5c/0xd50 A few pages further the fault is fatal. The registers at the oops confirm the bound: the loop's end pointer less the array start, over the pointer size, is 4294967284. Return the error in a separate variable and leave n_entries holding the count, the way tracing_map_sort_entries() does on its own error path. The stats block is only entered for a value carrying .percent or .graph, which __create_val_field() has rejected since v6.3, so this cannot be reached in mainline as it stands. It becomes reachable again with "tracing: hist: let values keep the percent and graph modifiers", so it should be applied first. | ||||
| CVE-2026-97933 | 1 Linux | 1 Linux Kernel | 2026-10-01 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: tracing: Take trace_array reference when opening a tracer options file When a tracer option file is opened, it is passed a descriptor that points to an element on the trace_array's topts array. This element has information to find the trace array and other information. It uses this element to take a reference of the trace_array so that the trace_array does not get removed while this file is opened. Unfortunately, there's a race condition where the element itself could be freed by the removal of the instance the trace_array represents causing a use-after-free as this element that is used to find the trace_array to increment its reference counter is also freed when the instance is removed. To solve this, add a trace_array_tracer_options_get() helper function that will take the address of the element that is passed to the open function by the inode->i_private pointer and search all the trace_arrays under a lock to find the one that the element's address is in the range of the trace_arrays topts array elements. When a match happens, that trace_array's reference would be increased. Note, there's a race where if an admin was deleting and creating trace instances at the same time and the memory of the old trace_array's array matched the memory of the new trace_array that it could in theory open the option from the wrong trace array. But we do not care because it would be stupid to perform that kind of action. As long as the only thing that can happen is that the option from the wrong trace array is used and doesn't crash the kernel it will only make the user confused. But if they are doing something stupid like this, they are already confused, so no harm done. | ||||
| CVE-2026-97937 | 1 Linux | 1 Linux Kernel | 2026-10-01 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ftrace: fork: Initialize function graph state before copy_exec_state() dup_task_struct() copies the parent's task_struct, including ret_stack. ftrace_graph_init_task() clears the copied function graph state, but it currently runs after copy_exec_state(). For non-CLONE_VM forks, copy_exec_state() allocates a new task_exec_state. If that allocation fails, copy_process() reaches bad_fork_free and free_task() calls ftrace_graph_exit_task(). Since the child still carries the parent's ret_stack pointer, the unwind frees the parent's active function graph return stack. The parent subsequently accesses freed memory from function_graph_enter_regs(). KASAN reports: [ 22.190920] ================================================================== [ 22.195899] BUG: KASAN: slab-use-after-free in function_graph_enter_regs+0xa76/0xb90 [ 22.200747] Write of size 8 at addr ff110000054dc0a8 by task repro/1 [ 22.205134] [ 22.210770] CPU: 0 UID: 0 PID: 1 Comm: repro Not tainted 7.2.0-07732-g9328b3b03bdc-dirty #3 PREEMPT(lazy) [ 22.212576] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 [ 22.213750] Call Trace: [ 22.215271] <TASK> [ 22.216242] ? ftrace_stub_direct_tramp+0x10/0x10 [ 22.217774] dump_stack_lvl+0x4e/0x70 [ 22.220531] print_report+0x157/0x4b4 [ 22.223202] ? fixup_red_left+0x9/0x30 [ 22.224407] ? complete_report_info+0x83/0x110 [ 22.226679] ? function_graph_enter_regs+0xa76/0xb90 [ 22.228084] kasan_report+0xce/0x100 [ 22.230109] ? function_graph_enter_regs+0xa76/0xb90 [ 22.232860] ? stack_trace_save+0x4/0xd0 [ 22.234156] function_graph_enter_regs+0xa76/0xb90 [ 22.236090] ? kasan_save_stack+0x30/0x50 [ 22.237752] ? __pfx_function_graph_enter_regs+0x10/0x10 [ 22.238694] ? ring_buffer_lock_reserve+0x345/0xf80 [ 22.239628] ? stack_trace_save+0x4/0xd0 [ 22.242121] ? stack_trace_save+0x4/0xd0 [ 22.243588] ftrace_graph_func+0xda/0x160 [ 22.245362] ? ftrace_stub_direct_tramp+0x10/0x10 [ 22.246520] 0xffffffffa0000095 [ 22.250528] ? stack_trace_save+0x9/0xd0 [ 22.251757] ? ring_buffer_unlock_commit+0x11d/0x5c0 [ 22.253152] stack_trace_save+0x9/0xd0 [ 22.254264] kasan_save_stack+0x30/0x50 [ 22.273631] kasan_save_track+0x14/0x30 [ 22.276763] kasan_save_free_info+0x3b/0x70 [ 22.278296] __kasan_slab_free+0x43/0x70 [ 22.280157] kmem_cache_free+0xbf/0x3b0 [ 22.282963] ? ftrace_stub_direct_tramp+0x10/0x10 [ 22.284001] free_task+0xa2/0x160 [ 22.285699] ? ftrace_stub_direct_tramp+0x10/0x10 [ 22.286752] copy_process+0x2aae/0x7bc0 Initialize the child function graph state immediately after dup_task_struct(), before the first fallible operation. | ||||
| CVE-2026-97938 | 1 Linux | 1 Linux Kernel | 2026-10-01 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: reboot: fix cad_pid use-after-free race cad_pid is a single kernel-wide struct pid pointer. proc_do_cad_pid() reads it and passes it to pid_vnr() without protecting the lifetime of the referenced struct pid. A concurrent writer can replace cad_pid and drop the final reference to the old struct pid after the reader has loaded the pointer but before pid_vnr() has finished dereferencing it, causing a use-after-free. kill_cad_pid() has the same lifetime race when it passes cad_pid to kill_pid(). At the time this issue was reported, an unprivileged user could reach the sysctl through user and PID namespaces because cad_pid was registered in pid_table[]. Moving cad_pid back to the global reboot sysctl table corrected that namespace and permission mismatch, but did not fix the underlying lifetime race. Fix this by treating cad_pid as an RCU-protected pointer at both read sites and by waiting for a grace period before dropping the old reference on the write side. call_rcu(&old_pid->rcu, ...) cannot be used here because free_pid() also queues pid->rcu; queueing the same rcu_head twice can corrupt the RCU callback list. Original KASAN crash stack: kernel/pid.c:545 pid_nr_ns() # reads freed pid->level kernel/pid.c:556 pid_vnr() # calls pid_nr_ns() kernel/pid.c:775 proc_do_cad_pid() # calls pid_vnr(cad_pid) | ||||
| CVE-2026-97943 | 1 Linux | 1 Linux Kernel | 2026-10-01 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: x86/mm/pat: Acquire init_mm write lock on collapse to avoid UAF x86 implements page attribute modification using its Change Page Attributes (CPA) mechanism. This tracks properties of ranges such as cache mode through x86 page attributes, and as part of that logic manipulates kernel page tables. Since commit: 41d88484c71c ("x86/mm/pat: restore large ROX pages after fragmentation") ranges of kernel page table entries can be collapsed into huge page table entries as part of this logic. As part of this collapse, it frees the page tables which the collapsed entries previously pointed to, and it does so without any relevant locks being held to preclude concurrent kernel page table walkers. The only way this code can be reached is if CPA_COLLAPSE is specified, and this is only set in set_memory_rox() via: set_memory_rox() -> change_page_attr_set_clr() -> cpa_flush() -> cpa_collapse_large_pages() Notable users of this are execmem and BPF when manipulating executable mappings. However, this is problematic for ptdump as it walks ranges it does not own and thus runs the risk of a use-after-free on page tables freed underneath it. In addition, concurrent CPA collapse operations are possible which can also cause races. Resolve the issue by acquiring the mmap write lock on init_mm across the whole operation. It is safe to acquire a sleeping lock as all the callers invoke set_memory_rox() from process context and in any case, change_page_attr_set_clr() calls vm_unmap_alias() which ultimately takes a mutex, disallowing atomic context here. | ||||
| CVE-2026-100260 | 1 Jetbrains | 1 Youtrack | 2026-10-01 | 5.3 Medium |
| In JetBrains YouTrack before 2026.2.18991 mailbox integration allowed authentication after a password reset | ||||
| CVE-2026-100279 | 1 Jetbrains | 1 Youtrack | 2026-10-01 | 6.5 Medium |
| In JetBrains YouTrack before 2026.2.19197 changing an integration URL exposed its stored credentials | ||||
| CVE-2026-102991 | 1 Sqlalchemy | 1 Mako | 2026-10-01 | 6.5 Medium |
| Mako is a template library written in Python. Prior to 1.4.2, on Windows, TemplateLookup.get_template() in mako/lookup.py resolves template URIs with posixpath, while Template.__init__() in mako/template.py validates them with os.path, which uses ntpath. A URI beginning with a drive designator causes ntpath to absorb the traversal segments before the leading dot-dot check, while posixpath resolution can escape the configured template directory. An application that passes attacker-controlled template names or include paths can disclose process-readable files on the same volume, and a targeted file containing Mako template syntax may also be parsed and executed as a template. Raw URL paths are generally normalized before reaching this form, but query strings, form or JSON bodies, route parameters, and dynamic include expressions can preserve it. This issue is fixed in version 1.4.2. | ||||
| CVE-2026-102992 | 1 Piscinajs | 1 Piscina | 2026-10-01 | N/A |
| piscina is a node.js worker pool implementation. Prior to 4.9.4, 5.3.2, and 6.0.0-rc.5, Piscina stores ThreadPool.options in src/index.ts as a plain object that inherits from Object.prototype. Applications with a separate prototype-pollution primitive can therefore supply inherited values for security-sensitive options that do not have own defaults. An inherited execArgv value is passed to the Node.js Worker constructor and can preload attacker-controlled code in worker threads, an inherited loadBalancer function can execute during task scheduling, and inherited env values can alter worker environments. This issue is fixed in versions 4.9.4, 5.3.2, and 6.0.0-rc.5. | ||||
| CVE-2026-97979 | 1 Linux | 1 Linux Kernel | 2026-10-01 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ice: add missing xa_destroy for sched_node_ids Commit 16dfa49406bc ("ice: Introduce new parameters in ice_sched_node") added a sched_node_ids xarray to the port info structure, but never called xa_destroy on it. Since xarrays can allocate internal memory, this can result in a memory leak even if every element in the xarray has been removed. The xarray is currently embedded in the port_info structure. This appears to have been done because its use is within functions that take the port_info as a primary argument. However, this complicates managing the lifecycle of the field. The port_info structure is allocated in ice_init_hw() using devm, and it is not released until the devm cleanup when the driver is unloaded. The ice_init_hw() function is called in many places, including devlink reload, and possibly during DDP load after updating the Tx scheduler layout. Adding a call of xa_destroy to the ice_deinit_hw() causes Sashiko to raise multiple concerns due to potential ordering issues and possible ways that port_info could be a dangling reference. To handle this, move the sched_node_ids out of port_info and into the hw structure. All users of the array already have a pointer to hw anyways, and there is only one sched_node_ids per adapter. While here, remove the overly verbose comment explaining the nature of the sched_node_ids xarray. Add the missing xa_destroy to the cleanup path and to ice_deinit_hw(), ensuring that we properly release the xarray memory. This was caught by Sashiko during development of unrelated code. | ||||
| CVE-2026-93462 | 1 Basercms Users Community | 1 Basercms | 2026-10-01 | N/A |
| A missing authentication for critical function vulnerability exists in baserCMS. If this vulnerability is exploited, a remote attacker may obtain sensitive information. | ||||
| CVE-2026-47604 | 1 Nvidia | 7 Geforce, Guest Driver, Nvs and 4 more | 2026-10-01 | 5.5 Medium |
| NVIDIA GPU Display Driver for Windows and Linux contains a vulnerability in the kernel mode driver where a local user may access another process's GPU channel state due to missing authorization checks. A successful exploit of this vulnerability might lead to information disclosure. | ||||
| CVE-2026-65482 | 2 La-studioweb, Wordpress | 2 Element Kit For Elementor, Wordpress | 2026-10-01 | 6.5 Medium |
| Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in LA-Studio LA-Studio Element Kit for Elementor lastudio-element-kit allows DOM-Based XSS.This issue affects LA-Studio Element Kit for Elementor: from n/a through 1.6.3. | ||||
| CVE-2026-97905 | 1 Linux | 1 Linux Kernel | 2026-10-01 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: cpufreq: zero-initialize policy cpumask before sysfs publication cpufreq_policy_alloc() allocates policy->cpus with alloc_cpumask_var(), i.e. without __GFP_ZERO, unlike the sibling related_cpus and real_cpus masks. With CONFIG_CPUMASK_OFFSTACK=y the mask is a separate kmalloc_node() allocation, so its bitmap holds whatever the slab allocator left behind: cpufreq_online() cpufreq_policy_alloc() alloc_cpumask_var(&policy->cpus) /* bitmap is uninitialized */ kobject_init_and_add() /* policy%u/ appears in sysfs */ cpufreq_policy_online() cpumask_copy(policy->cpus, cpumask_of(cpu)) /* first valid value */ This leaves a window in which the sysfs attributes are already reachable while policy->cpus is still garbage. show()/store() gate on policy_is_inactive(), i.e. cpumask_empty(policy->cpus), so a non-zero bitmap makes them run the attribute callbacks on a policy that is not initialized yet. Fix this by using zalloc_cpumask_var() for policy->cpus. | ||||
| CVE-2026-97909 | 1 Linux | 1 Linux Kernel | 2026-10-01 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: sti: initialize IRQ lock before requesting IRQ uni_reader_init() registers the shared IRQ before initializing reader->irq_lock. A pending interrupt can invoke the handler while the lock is still uninitialized. Initialize the lock before registering the IRQ so the interrupt path always sees valid lock state. | ||||
| CVE-2026-97912 | 1 Linux | 1 Linux Kernel | 2026-10-01 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: accel: ethosu: Ensure SRAM size is 0 on mapping failure On a mapping failure of the SRAM, the SRAM size is left as non-zero. The probe will succeed as the error return is not checked since having SRAM is not a hard requirement. The non-zero size allows jobs to access SRAM which is left pointing to physical base address 0x0. | ||||
| CVE-2026-47595 | 1 Nvidia | 6 Geforce, Guest Driver, Nvs and 3 more | 2026-10-01 | 7.8 High |
| NVIDIA GPU Display Driver for Linux contains a vulnerability in the kernel mode layer where an unprivileged user can write to read-only memory because the memory's permissions are not preserved. A successful exploit of this vulnerability might lead to code execution, escalation of privileges, denial of service, information disclosure, and data tampering. | ||||
| CVE-2026-97923 | 1 Linux | 1 Linux Kernel | 2026-10-01 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: tracing: Free histogram the var ref when its initialization fails create_var_ref() allocates a VAR_REF hist_field and then calls init_var_ref() to fill it in. When that fails the field is leaked. commit 656fe2ba85e8 ("tracing: Use hist trigger's var_ref array to destroy var_refs") made destroy_hist_field() return early for HIST_FIELD_FL_VAR_REF, since var refs are freed by walking the trigger's var_refs[] array instead. create_var_ref() adds the field to that array only after init_var_ref() has succeeded, so on this path the field is in neither place and nothing frees it. The call was correct when it was written, before var refs were taken out of destroy_hist_field(). init_var_ref() cannot free it either. The caller owns the field, so init_var_ref() undoes only its own string allocations and leaves the field alone. Freeing it there would leave create_var_ref() passing freed memory to destroy_hist_field(), which reads its flags. Call __destroy_hist_field(), which frees the field without consulting the flag. | ||||
| CVE-2026-97924 | 1 Linux | 1 Linux Kernel | 2026-10-01 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: tracing/user_events: Don't destroy fields when event removal fails destroy_user_event() destroys the event's fields before attempting to remove the trace event call. If user_event_set_call_visible() fails, e.g. because the event is still enabled and trace_remove_event_call() returns -EBUSY, the event is left registered with an irreversibly destroyed field list. Any subsequent interaction with the event then operates on an empty field list while it is still fully visible in tracefs. Move the field destruction after the call removal, and splice the field list back onto the event when the removal fails so the event remains in a consistent state. | ||||