Export limit exceeded: 426599 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.

Export limit exceeded: 426599 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.

Search

Search Results (426599 CVEs found)

CVE Vendors Products Updated CVSS v3.1
CVE-2026-93670 1 Zephyrproject 1 Zephyr 2026-11-16 3.5 Low
The Synopsys DesignWare I3C controller driver (drivers/i3c/i3c_dw.c) tracks free Device Address Table (DAT) slots with get_free_pos(), which signals an exhausted table by returning -1. The helper declared its return type as uint8_t, so the sentinel was truncated to 255, and both consumers (dw_i3c_attach_device() and dw_i3c_i2c_attach_device()) also stored it in a uint8_t before testing if (pos < 0) — a comparison that is never true for an unsigned value. The exhaustion guard was therefore inert in every build. With the guard defeated, an attach attempted on a full DAT proceeds with pos == 255: it writes data->dw_i3c_i2c_priv_data[255].id, more than 200 bytes past the end of the 32-element dw_i3c_i2c_priv_data array and past the end of struct dw_i3c_data; it stores the resulting out-of-bounds address in desc->controller_priv, from which later detach, reattach and IBI operations read the slot index back; and it performs a 32-bit MMIO store 1020 bytes beyond the hardware DAT base, outside the table the controller reports. The attach still returns success, so the upper layer believes the device is bound. The DAT is smaller than the software array (its depth is read from DEVICE_ADDR_TABLE_POINTER, commonly 8 or 16 entries), so exhaustion is reachable. In a dual-role build (CONFIG_I3C_DUAL_ROLE with CONFIG_I3C_USE_IBI) acting as a secondary controller, the attach count is supplied by the bus's active controller: i3c_sec_handoffed() attaches one device per entry of the received DEFTGTS list, so a hostile or malfunctioning controller on the local I3C bus that declares more targets than the local DAT depth triggers the condition once per surplus entry. Exhaustion can also be reached from a devicetree that declares more devices than the table holds, or by repeated i3c attach shell commands. Impact is bounded: the out-of-bounds store is a single byte of fixed value at a fixed displacement, with no attacker-chosen data or offset, so the realistic outcomes are corruption of neighbouring static driver state, writes into reserved controller registers, and inconsistent driver bookkeeping (a crash or a wedged I3C bus) rather than a controllable memory-write primitive. The attack vector is the local chip-to-chip I3C bus; there is no network-reachable path.
CVE-2026-93673 1 Zephyrproject 1 Zephyr 2026-11-16 4.8 Medium
The Zephyr WebSocket client validates the server's handshake response in on_header_value() in subsys/net/lib/websocket/websocket.c. The comparison was performed as strncmp(at, str, length), where length is the length of the value the server sent rather than the length of the expected value, so the check only asked whether the received value was a prefix of the expected base64(SHA-1(key || GUID)). A server that returned a handful of correct characters passed, and a response carrying an empty Sec-WebSocket-Accept: header caused strncmp() to be called with a count of zero, which returns 0 and set ctx->sec_accept_ok with no comparison performed at all. The header-value callback also cleared ctx->sec_accept_present after the first chunk, so a value split across receive-buffer boundaries was only ever examined in part. ctx->sec_accept_ok is the sole WebSocket-specific gate in websocket_connect(); the client does not check the HTTP status code or the Upgrade:/Connection: headers. Any HTTP response containing an empty or prefix-matching Sec-WebSocket-Accept header therefore completed the handshake, after which the socket is finalized as a WebSocket and all further peer bytes are parsed as frames. The affected path is driven directly by remote input through subsys/net/lib/http/http_parser.c, and is reached by every user of websocket_connect(), including MQTT over WebSocket (subsys/net/lib/mqtt/mqtt_transport_websocket.c) and subsys/net/lib/ocpp/ocpp.c. The Sec-WebSocket-Accept exchange is not a secret-based authentication -- an endpoint or on-path attacker that sees the request can compute the expected value -- so the impact is bounded to parties that never observed the handshake request: a caching or transparent intermediary replaying a canned response, an off-path attacker injecting a spoofed response, or a non-WebSocket endpoint the client was induced to talk to. For those, the per-connection binding that RFC 6455 requires the client to enforce provided no protection at all, letting a single crafted response convince the device it holds a live WebSocket session and causing it to send application data to, and accept frames from, an unverified peer. There is no memory-safety consequence. The fix compares each delivered chunk against the expected value at the position reached so far, refuses a chunk that would overrun it, and accepts only once every byte of the expected value -- and no more -- has been matched; on_header_field() now also clears the flag for any other header so a partial value cannot be continued across an intervening header.
CVE-2026-123353 1 Docmost 1 Docmost 2026-11-16 3.3 Low
Docmost is open-source collaborative wiki and documentation software. Prior to 0.96.0, two concurrent role-demotion requests from a space admin or workspace owner can each pass the last-admin or last-owner count check before either update is committed because the validation and role update are not serialized in one transaction. The requests can therefore demote the final two space admins or workspace owners and leave the affected space without an admin or the workspace without an owner, preventing normal administrative recovery. This issue is fixed in version 0.96.0.
CVE-2026-107372 1 Auth0 1 Auth0 Ai Js 2026-11-16 7.5 High
The auth0-ai-js FGA retriever does not distinguish between authorization checks under different conditions when filtering documents during retrieval-augmented generation, resulting in documents denied by Auth0 FGA being included in the model context and used in the generated response.
CVE-2026-126673 2026-11-16 9.8 Critical
Data::Dump::Streamer versions before 3.00 for Perl allow code injection via unescaped Regexp patterns in _dump_qr. A Regexp's pattern is written into a qr literal without escaping "$" or "@", so "@{[ ... ]}" and "${\ ... }" in the pattern run as code when the dump is evaluated. An already escaped delimiter gets a second backslash, which leaves the delimiter bare and ends the qr literal early. An attacker who supplies a pattern that an application compiles, dumps and later restores with eval or do can run arbitrary Perl code.
CVE-2026-120699 2026-11-16 N/A
CubeSandbox is an instant, concurrent, secure, and lightweight sandbox for AI agents. Prior to 0.5.1, any authenticated tenant permitted to call POST /sandboxes can supply metadata["host-mount"] with an arbitrary existing host path because the control plane performs no authorization check or allowed-prefix validation for the path. injectHostDirMounts forwards the path to prepareHostDirVolume, where Cubelet uses mount --rbind through the function to perform a recursive bind mount as root and exposes the host subtree to the tenant's MicroVM through virtio-fs, read-write by default. This allows host-root file access and modification, host code execution, access to the container runtime, and compromise of co-resident tenants without a kernel or virtual-machine-monitor flaw. This issue is fixed in version 0.5.1.
CVE-2026-71306 2026-11-16 5.8 Medium
Mikochi is a minimalist file manager with streaming capabilities. Prior to 1.10.1, authenticated users of bare-metal instances configured with a non-default trailing-slash DATA_DIR can use the Move endpoint to supply traversal-containing source or destination paths. The affected path validation can resolve those paths outside the configured data directory, allowing files to be written beyond Mikochi's intended storage boundary. Docker deployments that confine the data directory to a mounted volume and configurations whose DATA_DIR lacks a trailing slash are not affected by the described attack. This issue is fixed in version 1.10.1.
CVE-2026-111760 1 Git 1 Git 2026-11-16 8 High
Git is a fast, scalable, distributed revision control system with an unusually rich command set that provides both high-level operations and full access to internals. Prior to 2.50.2, 2.51.3, 2.52.1, 2.53.1, 2.54.1, 2.55.1, and 2.56.1, an attacker-controlled repository hosted by the attacker rather than on a normal forge site can exploit git clone --recurse-submodules by causing Git to overwrite a submodule gitfile with a symbolic link. The symbolic link can point to a directory containing attacker-controlled Git configuration or hooks, allowing those hooks or configuration to execute code on the cloning user's system. The issue requires the recursive-submodule option, and users should avoid cloning repositories from untrusted sources. This issue is fixed in versions 2.50.2, 2.51.3, 2.52.1, 2.53.1, 2.54.1, 2.55.1, and 2.56.1.
CVE-2026-127219 2026-11-16 5.3 Medium
WPChat plugin for WordPress before 1.4.6 contains a broken access control vulnerability that allows unauthenticated remote attackers to invoke the admin claim-offer action by reusing the publicly exposed wpchat_frontend nonce without any capability check. Attackers can call SmartSearchManagerService::claimOffer() via POST /wp-json/wpchat/v1/smart-search/claim-offer to register an attacker-controlled email against the site's domain using the site's stored api_token, corrupting the WPChat account and newsletter identity bound to the installation.
CVE-2026-68934 2026-11-16 N/A
code-review-mcp-server automates code review and can post comments directly on GitHub pull requests. Prior to 1.5.3, the getLocalGitDiff, codeReview, createPR, and getPRTemplate MCP tools accept caller-controlled folderPath and baseBranch string parameters that are interpolated into command strings executed by child_process.execSync through /bin/sh. Shell metacharacters, command substitution, or quote-breaking input can therefore execute arbitrary commands with the privileges of the host process running the MCP server. This issue is fixed in version 1.5.3.
CVE-2026-126828 2026-11-16 N/A
A vulnerability in Phison SSD controller firmwares (Phison E18; EIFM80.0, Phison E18; EIFK51.2) allows a local attacker with administrative privileges to bypass the "Security Access" handshake by leveraging leaked RSA parameters found in vendor utility binaries. By successfully completing the authentication, an attacker can access vendor-specific commands that permit arbitrary memory read and write operations. Because the firmware's code regions lack protection, these primitives can be used to overwrite existing handlers and achieve volatile code execution on the SSD controller.
CVE-2026-129190 2026-11-16 N/A
A vulnerability in the Phison SSD controller firmware Phison E12; ECFM32.2 allows a local attacker with administrative privileges to bypass the "Security Access" handshake by leveraging leaked RSA parameters found in vendor utility binaries. By successfully completing the authentication, an attacker can access vendor-specific commands that permit arbitrary memory read and write operations. Because the firmware's code regions lack protection, these primitives can be used to overwrite existing handlers and achieve volatile code execution on the SSD controller.
CVE-2026-129187 2026-11-16 N/A
A vulnerability in the Phison SSD controller firmware Phison E16; EGFM13.2 allows a local attacker with administrative privileges to bypass the "Security Access" handshake by leveraging leaked RSA parameters found in vendor utility binaries. By successfully completing the authentication, an attacker can access vendor-specific commands that permit arbitrary memory read and write operations. Because the firmware's code regions lack protection, these primitives can be used to overwrite existing handlers and achieve volatile code execution on the SSD controller.
CVE-2026-96414 1 Octopus 1 Octopus Server 2026-11-16 N/A
In affected versions of Octopus Server, insufficient integrity protection of authentication cookies, combined with incorrect validation of permissions assigned to a user that allowed them to view users or audit events, could result in the user escalating their privileges to those of an Administrator.
CVE-2026-93487 1 Octopus 1 Octopus Server 2026-11-16 N/A
In affected versions of Octopus Server, incorrect validation of the permissions assigned to a user that would allow them to create project triggers could result in the user being able to run runbooks or create deployments they were not authorised to perform.
CVE-2026-91115 2026-11-16 8.8 High
Silverstripe Framework is a PHP framework which powers the Silverstripe CMS. From 6.0.0 until 6.2.13, the writer option of i18nTextCollectorTask is passed to the dependency injector without validating that it names an allowed writer implementation. A crafted dev task URL can therefore instantiate arbitrary objects with attacker-controlled constructor arguments and execute code on the server. An administrator can be induced to run the task by following a link because the nested task did not require confirmation, and a site in dev mode exposes the path without authentication. CMS 5 is not affected. This issue is fixed in version 6.2.13.
CVE-2026-83817 2026-11-16 7.5 High
CodeWhale is a DeepSeek and MiMo coding agent for the terminal. Prior to 0.9.0, DEFAULT_AUTOMATION_AUTO_APPROVE caused AutomationRecord::task_auto_approve to resolve an omitted setting to true, and the automation_create schema advertised the same insecure default. enqueue_run_task converted that omission into an explicit true value, bypassing the safer task-path fallback and selecting ApprovalMode::Bypass for each scheduled run. After a user approved creation of an apparently benign recurring automation, subsequent executions could silently authorize mutating tools without a human present, and an automation created with shell access could repeatedly execute commands. This issue is fixed in version 0.9.0.
CVE-2026-83816 2026-11-16 8.1 High
CodeWhale is a DeepSeek and MiMo coding agent for the terminal. Prior to 0.9.0, the ExecShellTool::approval_requirement_for path used is_parallel_readonly_command to downgrade commands to automatic approval based on a flag-stripped command allowlist. The allowlist treated fd, rg, and git grep as read-only even when fd -x or fd --exec, rg --pre, or git grep --open-files-in-pager selected an external program. registered_tool_approval_required returned without displaying a prompt for that automatic classification, and the later command-safety check also treated the base utilities as safe. Attacker-controlled content that influenced an agent tool call could therefore cause arbitrary program execution on the developer host without the approval promised by the default interactive profile, resulting in unauthorized access, modification, or disruption. This issue is fixed in version 0.9.0.
CVE-2026-69221 2026-11-16 5.9 Medium
Faust.js is a headless WordPress toolkit. Prior to 1.8.12, the FaustWP generateAuthorizationCode GraphQL mutation called wp_authenticate_username_password and wp_authenticate_email_password directly instead of using wp_authenticate. This bypassed callbacks registered on WordPress's outer authenticate filter, including policies for multifactor authentication, single sign-on, IP allowlists, or disabled accounts. On a site using FaustWP local login and one of those policies, an attacker with a valid username or email and password could obtain an authorization code and exchange it through /api/faust/auth/token for access and refresh tokens even when the normal WordPress login path would deny access. This issue is fixed in version 1.8.12.
CVE-2026-13656 1 Synology 1 Diskstation Manager 2026-11-16 5.4 Medium
An improper neutralization of input during web page generation vulnerability in the Audio Player in Synology DiskStation Manager (DSM) before 7.3.2-86009-5 and 7.4.1-90080-1 allows remote authenticated users to read or write specific files.