Export limit exceeded: 47596 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (47596 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-93800 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: fix use-after-free on reloc root after error in insert_dirty_subvol() If during relocation we fail in insert_dirty_subvol() because btrfs_update_reloc_root() returned an error, we will leave a root's reloc_root field pointing to a reloc root that was freed instead of NULL, resulting later in a use-after-free, or double free attempt during unmount. The sequence of steps is this: 1) During relocation the call to btrfs_update_reloc_root() in insert_dirty_subvol() fails, so insert_dirty_subvol() returns the error to merge_reloc_root() without adding the root to the list rc->dirty_subvol_roots; 2) Then merge_reloc_root() aborts the current transaction because insert_dirty_subvol() returned an error; 3) Up the call chain, merge_reloc_roots() gets the error, adds the reloc root for root X to the local reloc_roots list and jumps to the 'out' label, where it calls free_reloc_roots() to free all the reloc roots in the local reloc_roots list. This frees the reloc root for root X; 4) We go up the call chain to relocate_block_group() which calls clean_dirty_subvols() to go over dirty roots and set their ->reloc_root field to NULL, but root X is not in the dirty_subvol_roots list, so its ->reloc_root still points to a reloc root; 5) Relocation finishes, with an error and a transaction abort, but the ->reloc_root field for root X still points to the reloc root that was freed in step 3; 6) When unmounting the fs we end up calling: btrfs_free_fs_roots() btrfs_drop_and_free_fs_root() --> calls btrfs_put_root() against root X's ->reloc_root which is not NULL and points to the already freed reloc root in step 4 above Resulting in a use-after-free to a double free attempt. Syzbot reported this with the following dmesg/syslog: [ 106.004389][ T5339] BTRFS error (device loop0 state A): Transaction aborted (error -5) [ 106.014266][ T5339] BTRFS: error (device loop0 state A) in merge_reloc_root:1655: errno=-5 IO failure [ 106.021891][ T1061] BTRFS error (device loop0 state A): error while writing out transaction: -5 [ 106.026964][ T1061] BTRFS warning (device loop0 state A): Skipping commit of aborted transaction. [ 106.033807][ T5340] BTRFS error (device loop0 state A): bdev /dev/loop0 errs: wr 3, rd 0, flush 0, corrupt 0, gen 0 [ 106.039265][ T1061] BTRFS: error (device loop0 state A) in cleanup_transaction:2067: errno=-5 IO failure [ 106.044382][ T5339] BTRFS info (device loop0 state EA): forced readonly [ 106.074329][ T5339] BTRFS: error (device loop0 state EA) in merge_reloc_roots:1887: errno=-5 IO failure [ 106.081004][ T5356] BTRFS info (device loop0 state EA): scrub: started on devid 1 [ 106.085611][ T5339] BTRFS info (device loop0 state EA): balance: ended with status: -30 [ 106.089517][ T5356] BTRFS info (device loop0 state EA): scrub: not finished on devid 1 with status: -30 [ 106.662365][ T5338] BTRFS info (device loop0 state EA): last unmount of filesystem 3a375e4e-b156-4d76-a2ad-16e198ce1409 [ 106.682946][ T5338] ================================================================== [ 106.686574][ T5338] BUG: KASAN: slab-use-after-free in btrfs_put_root+0x2f/0x250 [ 106.690090][ T5338] Write of size 4 at addr ffff88803f978630 by task syz.0.0/5338 [ 106.693173][ T5338] [ 106.694279][ T5338] CPU: 0 UID: 0 PID: 5338 Comm: syz.0.0 Not tainted syzkaller #0 PREEMPT(full) [ 106.694293][ T5338] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 [ 106.694300][ T5338] Call Trace: [ 106.694308][ T5338] <TASK> [ 106.694314][ T5338] dump_stack_lvl+0xe8/0x150 [ 106.694331][ T5338] print_address_description+0x55/0x1e0 [ 106.694343][ T5338] ? btrfs_put_root+0x2f/0x250 [ 106.694358][ T5338] print_report+0x58/0x70 [ 106. ---truncated--- | ||||
| CVE-2026-93782 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: vhost-scsi: flush backend after device ioctls vhost-scsi translates guest response descriptors into userspace iovecs when commands are submitted. Target-core completes those commands asynchronously, so VHOST_SET_MEM_TABLE can replace the memory table while an in-flight command still retains response iovecs translated through the old table. If the old mapping is reused after VHOST_SET_MEM_TABLE returns, command completion can write the response to an unrelated userspace object. Flush the vhost-scsi backend after vhost_dev_ioctl() handles a device ioctl. This waits for in-flight commands that can still use the old response iovecs before the ioctl returns. | ||||
| CVE-2026-93287 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: i2c: smbus: reject oversized block transfers in the common path The SMBus block transfer length data->block[0] is validated in i2c_smbus_xfer_emulated() but that check runs too late for tracepoints and is skipped entirely when the adapter provides a native smbus_xfer implementation. This allows user-controlled oversized block lengths to reach tracepoint memcpy calls and driver callbacks unchecked. Add an early validation in __i2c_smbus_xfer() that rejects block transfers whose caller-supplied length is zero or exceeds I2C_SMBUS_BLOCK_MAX before any tracepoint fires or driver callback runs. data->block[0] is filled in by the device on SMBus block reads, so the check is scoped to operations where the length is actually supplied by the caller. This is consistent with the existing -EINVAL convention in the emulated path and protects all downstream consumers at once: the smbus_write tracepoint, all native smbus_xfer driver implementations, and the emulated path. Two distinct bugs are fixed by this change: Bug 1: smbus_write tracepoint OOB (include/trace/events/smbus.h) trace_smbus_write() fires before any validation and copies data->block[0]+1 bytes into a 34-byte event buffer. With block[0]=0xfe the tracepoint copies 255 bytes, overflowing by 221. BUG: KASAN: stack-out-of-bounds in trace_event_raw_event_smbus_write+0x27c/0x530 Read of size 255 at addr ffff88800d98fcf8 by task poc_smbus/91 Call Trace: <TASK> __asan_memcpy+0x23/0x80 trace_event_raw_event_smbus_write+0x27c/0x530 __i2c_smbus_xfer+0x43a/0xa40 i2c_smbus_xfer+0x19e/0x340 i2cdev_ioctl_smbus+0x38f/0x7f0 i2cdev_ioctl+0x35e/0x680 __x64_sys_ioctl+0x147/0x1e0 do_syscall_64+0xcf/0x15a0 entry_SYSCALL_64_after_hwframe+0x76/0x7e </TASK> Bug 2: i2c-stub I2C_SMBUS_I2C_BLOCK_DATA OOB (drivers/i2c/i2c-stub.c) stub_xfer() implements .smbus_xfer directly and only clamps block[0] against 256-command, not I2C_SMBUS_BLOCK_MAX. With block[0]=0xff and command=0 the loop accesses block[1+i] for i up to 254, far past the 34-byte union. UBSAN: array-index-out-of-bounds in drivers/i2c/i2c-stub.c:223:44 index 34 is out of range for type '__u8 [34]' Call Trace: <TASK> __ubsan_handle_out_of_bounds+0xd7/0x120 stub_xfer+0x1971/0x198f [i2c_stub] __i2c_smbus_xfer+0x306/0xa40 i2c_smbus_xfer+0x19e/0x340 i2cdev_ioctl_smbus+0x38f/0x7f0 i2cdev_ioctl+0x35e/0x680 __x64_sys_ioctl+0x147/0x1e0 do_syscall_64+0xcf/0x15a0 entry_SYSCALL_64_after_hwframe+0x76/0x7e </TASK> Both traces reproduced on v7.0-rc6+i2c/for-current with KASAN+UBSAN. | ||||
| CVE-2026-89739 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: usb: dwc3: gadget: Fix use-after-free in dwc3_gadget_free_endpoints due to race condition In dwc3_gadget_init_endpoint, &dep->nostream_work is bound with dwc3_nostream_work, and dwc3_gadget_endpoint_stream_event can queue this delayed work on system_percpu_wq when a DEPEVT_STREAM_NOSTREAM event is received. If we remove the gadget, dwc3_gadget_free_endpoints makes cleanup and the memory allocated for dep with kzalloc() is released by kfree(dep), while the delayed work mentioned above may still be pending or running. The sequence of operations that may lead to a UAF bug is as follows: CPU0 CPU1 | dwc3_thread_interrupt | dwc3_endpoint_interrupt | dwc3_gadget_endpoint_stream_event | queue_delayed_work(system_percpu_wq, | &dep->nostream_work) dwc3_gadget_free_endpoints | dwc3_free_trb_pool(dep) | list_del(&dep->endpoint.ep_list) | dwc3_debugfs_remove_endpoint_dir(dep) | kfree(dep) | // dep is freed | | dwc3_nostream_work | // use dep (use-after-free) Fix it by canceling the delayed work before kfree(dep) in dwc3_gadget_free_endpoints. | ||||
| CVE-2026-89445 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: iommufd: Fix UAF in selftest IOPF reporting IOMMUFD selftest TRIGGER_IOPF borrows an attach handle from group->pasid_array without synchronizing against PASID detach, then a concurrent iommu_report_device_fault() can dereference that borrowed handle's domain pointer after the detach erases the handle and frees the backing struct iommufd_attach_handle. TRIGGER_IOPF then dereferences the freed handle, causing a UAF. Fix by adding a iopf_rwsem in mock_dev to follow the expected design of a real driver. Hold its read side across the whole iommu_report_device_fault() call, and its write side around every path that attaches, detaches, or replaces a device domain. This can block new reports and drains in-flight reports before an old attach handle or the IOPF fault parameter can be removed. Also take the write side while registering a mock device, since it can invoke the mock driver's default-domain attach callback. | ||||
| CVE-2026-72463 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: xfrm: Fix dev use-after-free in xfrm async resumption xfrm async resumption hold skb->dev refcnt until after transport_finish. However, xfrm_rcv_cb may modify skb->dev to tunnel dev without taking device reference, such as vti_rcv_cb. The subsequent async resumption will decrement the tunnel device's reference count, which lead to uaf of tunnel dev and refcnt leak of orig dev as below: unregister_netdevice: waiting for vti1 to become free. Usage count = -2 Stash the original skb->dev to fix refcnt imbalance. The new skb->dev set by xfrm_rcv_cb can race with device teardown. Extend rcu protection over xfrm_rcv_cb and transport_finish to prevent races. | ||||
| CVE-2026-53359 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: KVM: x86: Fix shadow paging use-after-free due to unexpected role Commit 0cb2af2ea66ad ("KVM: x86: Fix shadow paging use-after-free due to unexpected GFN") fixed a shadow paging mismatch between stored and computed GFNs; the bug could be triggered by changing a PDE mapping from outside the guest, and then deleting a memslot. The rmap_remove() call would miss entries created after the PDE change because the GFN of the leaf SPTE does not match the GFN of the struct kvm_mmu_page. A similar hole however remains if the modified PDE points to a non-leaf page. In this case the gfn can be made to match, but the role does not match: the original large 2MB page creates a kvm_mmu_page with direct=1, while the new 4KB needs a kvm_mmu_page with direct=0. However, kvm_mmu_get_child_sp() does not compare the role, and therefore reuses the page. The next step is installing a leaf (4KB) SPTE on the new path which records an rmap entry under the gfn resolved by the walk. But when that child is zapped its parent kvm_mmu_page has direct=1 and kvm_mmu_page_get_gfn() computes the gfn for the 4KB page as sp->gfn + index instead of using sp->shadowed_translation[] (or sp->gfns[] in older kernels). It therefore fails to remove the recorded entry. When the memslot is dropped the shadow page is freed but the rmap entry survives, as in the scenario that was already fixed. Code that later walks that gfn (dirty logging, MMU notifier invalidation, and so on) dereferences an sptep that lies in the freed page, causing the use-after-free. | ||||
| CVE-2026-90448 | 1 Cisagov | 1 Malcolm | 2026-10-02 | 6.5 Medium |
| A deployment mode intended to expose only read access to stored data proxies a set of application programming interface routes without restricting which request methods are allowed. One such route accepts a request that creates or overwrites a stored record, including an attacker-chosen identifier, using the application's own elevated backend credentials. This allows an authenticated user on a deployment intended to be read-only to forge or overwrite stored records that should not be modifiable in that deployment mode. | ||||
| CVE-2026-90450 | 1 Cisagov | 1 Malcolm | 2026-10-02 | 4.3 Medium |
| The application's role-authorization lookup defaults to granting access when a request handler's name is not present in its table of role requirements, rather than defaulting to deny. Any request handler that is not explicitly registered in this table is reachable by any authenticated user regardless of their assigned role, and any newly added handler is fail-open by default until explicitly added to the table. | ||||
| CVE-2026-90454 | 1 Cisagov | 1 Malcolm | 2026-10-02 | 4.3 Medium |
| A deployment mode intended to expose only read access to a bundled packet-analysis component's interface denies a list of write-capable routes by pattern, but the pattern omits routes that modify tags attached to stored session records, and the proxy configuration otherwise permits the request method those routes use. This allows an authenticated user on a deployment intended to be read-only to add or remove tags on stored session records. | ||||
| CVE-2026-100256 | 1 Jetbrains | 1 Intellij Idea | 2026-10-02 | 7.8 High |
| In JetBrains IntelliJ IDEA before 2026.2.3 rCE via Structural Search script constraints was possible in untrusted projects | ||||
| CVE-2026-100259 | 1 Jetbrains | 1 Youtrack | 2026-10-02 | 4.3 Medium |
| In JetBrains YouTrack before 2026.2.18991 improper access control on Gantt chart allowed edits by users with view-only access | ||||
| CVE-2026-63177 | 1 Cisagov | 1 Malcolm | 2026-10-02 | 7.1 High |
| Malcolm is a network traffic analysis tool suite. Prior to version 26.07.0, role-based access control enforced in the Nginx OpenResty Lua layer evaluates the raw, unnormalized `ngx.var.request_uri`, while Nginx itself routes requests using the normalized path. An authenticated low-privilege user can prepend a traversal segment (for example `/x/../upload/...`) so that Nginx routes the request to a restricted backend while the Lua role check fails to match any rule and falls open, granting access it should deny. Version 26.07.0 fixes the issue. | ||||
| CVE-2026-100262 | 1 Jetbrains | 1 Youtrack | 2026-10-02 | 7.6 High |
| In JetBrains YouTrack before 2026.2.18991 missing authorisation allowed users with read-only project access to overwrite project notification templates | ||||
| CVE-2026-104054 | 1 Calcom | 1 Cal.diy | 2026-10-02 | 6.3 Medium |
| A security flaw has been discovered in calcom cal.diy up to 6.2.0. This affects the function doesUserIdHaveAccessToBooking of the file BookingAccessService.ts of the component PBAC Permission Engine. Performing a manipulation results in missing authorization. The attack can be initiated remotely. The exploit has been released to the public and may be used for attacks. The pull request to fix this issue awaits acceptance. | ||||
| CVE-2026-95314 | 1 Google | 1 Chrome | 2026-10-02 | 8.1 High |
| Incorrect authorization in HID in Google Chrome prior to 154.0.8037.57 allowed a remote attacker who had compromised the renderer process to bypass system access restrictions via a crafted HTML page. (Chromium security severity: Medium) | ||||
| CVE-2026-64008 | 1 Linux | 1 Linux Kernel | 2026-10-02 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: accel/rocket: fix UAF via dangling GEM handle in create_bo rocket_ioctl_create_bo() inserts a GEM handle into the file's IDR via drm_gem_handle_create() early on, then performs several operations that can fail (sgt allocation, drm_mm insert, iommu_map). If any fail after the handle is live, the error path calls drm_gem_shmem_object_free() which kfree's the object without removing the handle from the IDR. This leaves a dangling handle pointing to freed slab memory. Any subsequent ioctl using that handle (PREP_BO, FINI_BO, SUBMIT) calls drm_gem_object_lookup() and dereferences freed memory (UAF). Fix by moving drm_gem_handle_create() to after all fallible operations succeed, matching the pattern used by panfrost, lima, and etnaviv. Also fix drm_mm_insert_node_generic() whose return value was silently overwritten by iommu_map_sgtable() on the next line. Add the missing error check. [tomeu: Move handle creation to the very end] | ||||
| CVE-2026-95285 | 1 Google | 2 Android, Chrome | 2026-10-02 | 8.4 High |
| Missing authorization in WebView in Google Chrome on on Android prior to 154.0.8037.57 allowed a remote attacker who had compromised the renderer process to bypass web origin policy via a crafted HTML page. (Chromium security severity: Low) | ||||
| CVE-2026-95278 | 1 Google | 1 Chrome | 2026-10-02 | 8.4 High |
| Missing authorization in WakeLock in Google Chrome prior to 154.0.8037.57 allowed a remote attacker who had compromised the renderer process to bypass system access restrictions via a crafted HTML page. (Chromium security severity: Low) | ||||
| CVE-2026-104480 | 1 Discord | 1 Libdave | 2026-10-02 | N/A |
| Discord libdave before 1.2.0 did not reject an MLS Welcome message when the resulting group roster contained an unrecognized participant. An attacker in control of the DAVE signaling path (the voice gateway, or an equivalent position able to add, alter, or withhold signaling messages to a client) could cause affected clients to accept an unauthorized member into the end-to-end encrypted media session, compromising the confidentiality and integrity of audio and video. | ||||