Export limit exceeded: 47421 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (47421 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-74753 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: perf: Reject exited events as group leaders perf_event_remove_on_exec() sets remove-on-exec events to the EXIT state and detaches their group relationships. The event's file descriptor can remain open, however, and perf_event_open() currently accepts that event as a group leader because its early validation rejects only REVOKED and DEAD events. A new sibling can consequently be linked to the detached leader. When the leader is closed, perf_group_detach() observes that its PERF_ATTACH_GROUP bit is already clear and skips the new sibling. The sibling then retains a group_leader pointer to the freed event. Reject group leaders in the EXIT state. Perform the check while holding the shared context mutex so that an exec in the target task cannot detach the leader between validation and group attachment. [peterz: make the earlier test fully consistent] | ||||
| CVE-2026-74746 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: flowtable: publish GC-visible tuple last nf_flow_table_iterate() only treats original-direction tuple nodes as owning entries. Publishing the original node first lets GC observe and free a flow while flow_offload_add() is still inserting the reply node. Publish the reply node first and the original node last so GC never sees a partially installed flow. KASAN can trigger slab-use-after-free read and write reports in the flowtable/rhashtable path (rht_deferred_worker, jhash, flow_offload_del, flow_offload_lookup, etc.). | ||||
| CVE-2026-74745 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: eth: bnxt: avoid deadlock when canceling IRQ affinity notifier Unregistering IRQ affinity notifiers waits for the callback synchronously. bnxt takes the netdev instance lock in the notifier (to restart the queue) and cancels the work under the same lock. This may obviously deadlock. Move the restart to the async service task. The queue restart isn't super time sensitive. Store the new TPH tag, schedule the task. Safely canceling the service task is already ironed out. In bnxt_request_irq() the order of registering notifier, affinity and initial TPH programming has to be inverted. I think it was racy previously since user may trigger an update as soon as notifier is installed. There's a small known gap - if pcie_tph_get_cpu_st() fails at init and the target tag is 0 we may miss programming the entry. This does not seem worth fixing, the code has skip-on-failure all over the place, anyway. | ||||
| CVE-2026-74720 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Preserve pointer state for commuted arithmetic When scalar += pointer is handled in adjust_ptr_min_max_vals(), the destination register inherits the pointer state from the source pointer. Copying only selected fields is fragile because pointer provenance is tracked by several bpf_reg_state fields. Use the caller's temporary offset register to preserve the scalar operand while replacing the destination with the full pointer state. This preserves the frame number for PTR_TO_STACK registers and keeps parent identity fields consistent. | ||||
| CVE-2026-74705 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 10 Critical |
| In the Linux kernel, the following vulnerability has been resolved: udp: fix potential use-after-free in tunnel segmentation __skb_udp_tunnel_segment() gets the UDP header before ensuring the tunnel header is in the skb head. If the pull reallocates skb->head, the saved UDP header pointer is no longer valid. Get the UDP header after the pull to avoid a potential use-after-free. | ||||
| CVE-2026-74689 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: net/atm: fix slab-out-of-bounds read in vcc_setsockopt() vcc_setsockopt() contained an ineffective optlen check: if (__SO_LEVEL_MATCH(optname, level) && optlen != __SO_SIZE(optname)) return -EINVAL; If __SO_LEVEL_MATCH(optname, level) evaluated to false (e.g. if the caller passed a mismatched level), the length check optlen != __SO_SIZE(optname) was short-circuited and bypassed. Execution then fell through to switch(optname), calling copy_from_sockptr() assuming optval contained sufficient space. Furthermore, even if level matched, a cgroup BPF setsockopt filter could shrink optlen after entry. Because copy_from_sockptr() on kernel pointers uses memcpy(), this leads to a KASAN slab-out-of-bounds read when optlen is smaller than the expected structure size. Fix this by using copy_safe_from_sockptr(), which unconditionally validates that optlen is at least the expected size before copying. Also change the local 'value' variable type from 'unsigned long' to 'int' so that SO_SETCLP matches its sizeof(int) ABI encoding on 64-bit systems. | ||||
| CVE-2026-74688 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: sctp: clear control chunk transport if it is being removed sctp_make_heartbeat_ack() caches the destination transport in chunk->transport without taking a reference. When src_out_of_asoc_ok is enabled, the HEARTBEAT ACK may remain queued on control_chunk_list instead of being transmitted immediately. If the peer transport is removed while the chunk is still queued, sctp_assoc_rm_peer() drops the transport and schedules it for RCU freeing, but only clears cached transport pointers in out_chunk_list. The queued control chunk therefore retains a dangling transport pointer. Once an ASCONF_ACK clears the suppression and the queued control chunk is transmitted, SCTP dereferences the stale transport pointer, leading to a use-after-free. Fix this by also clearing chunk->transport for queued control chunks in control_chunk_list when removing the transport. | ||||
| CVE-2026-74667 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net/packet: reset the MAC header on the packet-socket transmit path packet_parse_headers() resets the MAC header only for a SOCK_RAW frame whose socket did not bind a protocol. A protocol-bound SOCK_RAW socket, any SOCK_DGRAM frame, and the legacy SOCK_PACKET path therefore leave skb->mac_header unset here. For frames sent via __dev_queue_xmit() this is harmless: it resets the MAC header unconditionally. But the packet-socket PACKET_QDISC_BYPASS path uses dev_direct_xmit(), which does not, so the frame reaches ndo_start_xmit() with the MAC header unset. A driver that reads eth_hdr(skb) on transmit then dereferences skb->head + (u16)~0, an out-of-bounds access ~64 KiB past the head -- the same class fixed for one consumer in commit f5089008f90c ("macsec: do not read an unset MAC header in macsec_encrypt()"). packet_parse_headers() runs only on the transmit path, where skb->data points at the start of the L2 header for every packet-socket type regardless of its length: SOCK_RAW and SOCK_PACKET carry a user-supplied header and SOCK_DGRAM has one built by dev_hard_header(). Reset the MAC header unconditionally, mirroring __dev_queue_xmit(), so the frame is anchored on the bypass path too. Found by 0sec (https://0sec.ai) using automated source analysis; verified against source and matched to the macsec KASAN report in f5089008f90c. Compile-tested. | ||||
| CVE-2026-74660 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: ebt_nflog: pin the NFLOG backend nf_log_unregister() runs after the per-net teardown so its final RCU grace period also drains readers that obtained the logger from a per-net binding. However, ebt_nflog passes an explicit ULOG log type to nf_log_packet() without holding a reference on the selected logger module, unlike the xt_NFLOG and nft_log frontends. An ebtables nflog rule can therefore remain callable while nfnetlink_log is unloaded. The resulting interleaving is: CPU 0 CPU 1 nfnetlink_log_fini() unregister_pernet_subsys() kfree(nfnl_log_pernet(net)) ebt_nflog_tg() nf_log_packet() nfulnl_log_packet() instance_lookup_get_rcu() The global ULOG logger is still registered at this point, so CPU 1 dereferences the per-net state after CPU 0 has freed it. KASAN reported: BUG: KASAN: slab-use-after-free in instance_lookup_get_rcu Read of size 8 at addr ff110001052e6210 by task poc/92 Call Trace: instance_lookup_get_rcu+0x1ce/0x1f0 [nfnetlink_log] nfulnl_log_packet+0x248/0x2fb0 [nfnetlink_log] nf_log_packet+0x204/0x300 ebt_nflog_tg+0x351/0x550 ebt_do_table+0xedf/0x22b0 Allocated by task 90: __kmalloc_noprof+0x186/0x470 ops_init+0x6d/0x420 register_pernet_operations+0x2f6/0x670 register_pernet_subsys+0x23/0x40 Freed by task 93: kfree+0x131/0x3c0 ops_undo_list+0x3e3/0x700 unregister_pernet_operations+0x232/0x490 unregister_pernet_subsys+0x1c/0x30 nfnetlink_log_fini+0x34/0x450 [nfnetlink_log] Acquire the ULOG logger module reference when an ebt_nflog rule is validated and release it when the rule is destroyed. Request the NFLOG backend for legacy callers when needed, matching xt_NFLOG. This prevents module teardown until all ebt_nflog rules have stopped using the logger. | ||||
| CVE-2026-74637 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: perf/core: Fix group leader use-after-free after sibling detach perf_group_detach() handles leader and sibling detach differently. When the group leader is detached, all siblings are promoted to singleton events and their group_leader pointer is reset to themselves. When a sibling is detached, it is removed from the leader's sibling_list, but its group_leader pointer is left pointing at the old leader. That is harmless when the sibling is being closed and freed immediately, as in the DETACH_DEAD path. It is not safe when the sibling is detached but kept alive, such as during CPU hotplug with DETACH_GROUP. In that case the sibling is removed from the context, while its file descriptor can still keep it alive. A typical failing sequence is: - A group contains leader L and sibling S. - CPU hot-unplug detaches S with DETACH_GROUP, removing it from L->sibling_list but leaving S->group_leader == L. - L is later closed and freed. - A PERF_IOC_FLAG_GROUP ioctl on S follows S->group_leader and dereferences the freed leader. This was reproduced by running the perf event fuzzer, CPU hotplug, and a stress workload concurrently: Unable to handle kernel paging request at virtual address 006b6b6b6b6b6cdb CPU: 2 PID: 12489 Comm: perf_fuzzer 6.18.7 PREEMPT pc : perf_ioctl+0x34c/0xc68 x20: ffffff89a3fa2c70 x8 : 6b6b6b6b6b6b6b6b Code: 943c4a0e 340047a0 f9404a94 f9411e88 (f940b908) Call trace: perf_ioctl+0x34c/0xc68 (P) __arm64_sys_ioctl+0xa0/0xf4 invoke_syscall+0x58/0xe4 el0_svc_common+0xa8/0xdc do_el0_svc+0x1c/0x28 el0_svc+0x40/0xc0 el0t_64_sync_handler+0x68/0xdc el0t_64_sync+0x1c4/0x1c8 The fault happened in perf_ioctl(), where perf_event_for_each() follows the stale group_leader pointer and perf_event_for_each_child() then dereferences the freed leader's context. Fix the use-after-free by promoting the detached sibling to a singleton. Also fix __event_disable() cgroup accounting and event state change. | ||||
| CVE-2026-74630 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ipv6: prevent in6_dev_get() from resurrecting inet6_dev in6_dev_get() reads dev->ip6_ptr under RCU and then unconditionally increments its refcount. Device teardown can clear the pointer and drop the last reference between these operations. The increment then resurrects an object whose RCU free has already been queued, so callers can use it after it is freed. Use refcount_inc_not_zero() and return NULL when the object has already reached zero. RCU keeps the memory accessible through the attempted reference acquisition, and a successful increment pins the object for the caller. An independent run on the exact unpatched 6f5156d7a31a (v7.2-rc3) kernel reproduced the invalid reference acquisition as UID 1000: refcount_t: addition on 0; use-after-free. ip6_mc_source+0xef4/0x17e0 It was followed by the corresponding reference underflow in ip6_mc_source(). The supplied trace from the same unpatched revision additionally shows the access after the RCU read-side section ends: BUG: KASAN: slab-use-after-free in mutex_lock+0x76/0xe0 Write of size 8 at addr ffff888015b50240 by task poc/1219 Bug found and triaged by OpenAI Security Research and validated by Trail of Bits. | ||||
| CVE-2026-74629 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net/dibs: Correct freeing of dmb_clientid_arr A dibs device interrupt handler can be active after dibs_dev_del() and may still access dmb_clientid_arr. (UAF) In case of a failure in dibs_dev_add() being called by dibs_lo_dev_probe() dmb_clientid_arr is freed twice (double free). Free dmb_clientid_arr in dibs_dev_release() after last reference is gone. Note that allocating in dibs_dev_add() instead of dibs_dev_alloc() is ok for now, because no dmbs can be registered before dibs_dev_add(). | ||||
| CVE-2026-74626 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: NTB: ntb_netdev: Preserve RX queue depth on allocation failure ntb_netdev_rx_handler() hands the received skb to the network stack before allocating its replacement. If the allocation fails, nothing is reposted. Every failure therefore takes one buffer out of the RX queue while the interface remains up, and enough failures eventually stall reception. A retry path could refill the queue later, but ntb_netdev has none. Allocate the replacement first instead. If that fails, drop the packet and repost the same skb. This keeps the queue full and lets packet delivery resume as soon as memory is available again. | ||||
| CVE-2026-74624 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_conntrack: defer invalid log until after unlock TCP and SCTP conntrack paths can emit invalid-packet logs while ct->lock is still held. When invalid logging is routed to nfnetlink_log and conntrack export is enabled, the log path can re-enter conntrack netlink glue and dump the same conntrack again. Protocol attribute dumping may take ct->lock, so logging while holding that lock can deadlock. Defer the TCP invalid logs by storing only the minimal log context while ct->lock is held and emitting the log after unlocking. Also make the TCP timeout-lowering invalid path return whether a log is needed, then emit that log after unlocking. Do the same for the SCTP invalid state-transition log that can be reached while ct->lock is held. Add a lockdep assertion to nf_ct_l4proto_log_invalid() so future callers that log invalid conntracks while holding ct->lock are caught outside TCP and SCTP as well. | ||||
| CVE-2026-74615 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: vxlan: do not arm the ageing timer on a device that is down vxlan_changelink() arms vxlan->age_timer whenever the requested ageing interval differs from the configured one: if (conf.age_interval != vxlan->cfg.age_interval) mod_timer(&vxlan->age_timer, jiffies); There is no netif_running() test, so the timer is armed even on a device that was never brought up. The only synchronous cancel in the driver is the timer_delete_sync() in vxlan_stop(), which is .ndo_stop. netif_close_many() drops devices without IFF_UP before __dev_close_many() runs, so that cancel is skipped for such a device. vxlan_setup() sets dev->needs_free_netdev = true and age_timer is a member of struct vxlan_dev, so free_netdev() releases the allocation the timer lives in while it is still queued on a timer_base. expire_timers() unlinks the entry before it loads timer->function, so the timer core writes through the freed object's list pointers: BUG: KASAN: slab-use-after-free in __run_timers+0x208/0x654 Write of size 8 at addr ffff00001adace68 by task true/192 __asan_store8+0x84/0xac __run_timers+0x208/0x654 run_timer_softirq+0x154/0x18c Allocated by task 189: alloc_netdev_mqs+0x64/0x720 rtnl_create_link+0x4ac/0x520 rtnl_newlink+0x758/0xd00 Freed by task 191: netdev_release+0x40/0x58 netdev_run_todo+0x4a4/0x8c0 rtnl_dellink+0x200/0x4e8 The rtnl operations involved are netns-scoped, so an unprivileged user can perform them in a new user and network namespace. Arming the timer on a down device never had an effect: vxlan_cleanup() returns early on !netif_running(), and vxlan_open() arms the timer for any non-zero interval once the device is brought up. Add the missing test. Discovered by XBOW, triaged by Baul Lee <baul.lee@xbow.com> | ||||
| CVE-2026-74614 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: vsock/virtio: read virtqueues under worker locks Commit bd50c5dc182b ("vsock/virtio: add support for device suspend/resume") made the *_run flags transition from false to true when restore installs replacement virtqueues. The RX, TX and event workers read their virtqueue before locking and checking the corresponding flag, so a worker delayed across freeze and restore can observe the replacement queue's running state while retaining a pointer to the deleted queue. Read each virtqueue under its mutex after checking the run flag, keeping the pointer and state in the same queue generation. | ||||
| CVE-2026-74613 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: vsock/virtio: avoid refilling the RX queue after teardown Commit b917507e5ad9 ("vsock/virtio: stop workers during the .remove()") made the RX worker jump to its common exit when rx_run is clear. That exit still refills the RX queue when the buffer count is low, so work queued across virtio_vsock_vqs_del() can add buffers after the virtqueues have been deleted. BUG: KASAN: slab-use-after-free in virtqueue_add_sgs Read of size 4 by task kworker/0:1 Workqueue: virtio_vsock virtio_transport_rx_work Call Trace: virtqueue_add_sgs (drivers/virtio/virtio_ring.c:2796) virtio_vsock_rx_fill (net/vmw_vsock/virtio_transport.c:332) virtio_transport_rx_work (net/vmw_vsock/virtio_transport.c:701) process_one_work (kernel/workqueue.c:3314) worker_thread (kernel/workqueue.c:3478) kthread (kernel/kthread.c:436) ret_from_fork (arch/x86/kernel/process.c:158) ret_from_fork_asm (arch/x86/entry/entry_64.S:245) ... Freed by task 141: kfree (mm/slub.c:6566) vp_del_vq (drivers/virtio/virtio_pci_common.c:259) vp_del_vqs (drivers/virtio/virtio_pci_common.c:285) virtio_vsock_freeze (net/vmw_vsock/virtio_transport.c:912) virtio_device_freeze (drivers/virtio/virtio.c:658) virtio_pci_freeze (drivers/virtio/virtio_pci_common.c:601) pci_pm_freeze (drivers/pci/pci-driver.c:1098) device_suspend (drivers/base/power/main.c:1968) Kernel panic - not syncing: KASAN: panic_on_warn set ... Jump to a no-refill exit when rx_run is clear, leaving the normal exit to replenish a running queue. | ||||
| CVE-2026-74609 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: tipc: read le->link under the node lock in tipc_node_link_down() tipc_node_link_down() caches the link pointer before taking n->lock: struct tipc_link *l = le->link; /* unlocked */ if (!l) return; tipc_node_write_lock(n); if (!tipc_link_is_establishing(l)) { /* deref l */ ... tipc_link_reset(l); /* write into l */ if (delete) { kfree(l); le->link = NULL; The delete=true caller frees that very object under n->lock, so the lock does not protect the cached pointer against it: - CPU A, delete=false: tipc_rcv() on TIPC_LINK_DOWN_EVT, or the link supervision timer via tipc_node_timeout(), reads l unlocked and then dereferences it under n->lock; - CPU B, delete=true: netlink TIPC_NL_BEARER_DISABLE -> bearer_disable() -> tipc_node_delete_links() -> tipc_node_link_down(n, bearer_id, true) -> kfree(l). The link is freed with plain kfree(), not kfree_rcu(), and for UDP bearers disable_media() only schedules the asynchronous cleanup_bearer() work, so its synchronize_net() runs after the links are already gone. An in-flight CPU A that has read l therefore dereferences freed memory once B frees it: a use-after-free read in tipc_link_is_establishing(), and a use-after-free write via tipc_link_reset() on the establishing branch. The following trace was captured on 7.2.0-rc5-00284-gaf39eb111ce6: BUG: KASAN: slab-use-after-free in tipc_link_is_establishing (net/tipc/link.c:285) Read of size 4 at addr ffff88802e2aa068 by task swapper/2/0 tipc_link_is_establishing (net/tipc/link.c:285) tipc_node_link_down (net/tipc/node.c:1076) tipc_node_timeout (net/tipc/node.c:843) Allocated by task 9549: tipc_link_create (net/tipc/link.c:490) tipc_node_check_dest (net/tipc/node.c:1279) tipc_disc_rcv (net/tipc/discover.c:252) tipc_udp_recv (net/tipc/udp_media.c:389) Freed by task 9549: tipc_node_link_down (net/tipc/node.c:1084) tipc_node_delete_links (net/tipc/node.c:1320) bearer_disable (net/tipc/bearer.c:414) __tipc_nl_bearer_disable (net/tipc/bearer.c:992) Move the le->link read inside tipc_node_write_lock(), so it is serialised against the kfree() in the delete path. A racing teardown now either has not run yet, and we see a valid link, or has already run, and we see NULL. | ||||
| CVE-2026-74608 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: Fix use-after-free in cifs_try_adding_channels() cifs_try_adding_channels() takes a temporary reference to an interface before dropping iface_lock. If cifs_ses_add_channel() fails, it drops that reference and then increments iface->weight_fulfilled. A concurrent interface list refresh can remove the list reference while channel creation is in progress. In that case, the failure-path kref_put() releases the last reference and frees iface. Updating weight_fulfilled afterward then accesses freed memory. Increment weight_fulfilled before dropping the temporary reference, keeping iface alive for the final access. | ||||
| CVE-2026-74604 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: Revert "thermal/drivers/hwmon: Cleanup coding style a bit" Revert commit 030a48b0f6ce ("thermal/drivers/hwmon: Cleanup coding style a bit") that introduced a use-after-free into the error path of thermal_add_hwmon_sysfs() by removing a valid check from it. | ||||