Export limit exceeded: 24396 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (24396 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-90116 | 1 Linux | 1 Linux Kernel | 2026-09-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: mtpav: shut down output timer before card teardown snd_mtpav_output_timer() rearms chip->timer while holding chip->spinlock and accesses the card-private mtpav state. snd_mtpav_free() currently takes the same lock and calls timer_delete() when the timer is active. This only removes a pending timer; it does not wait for a callback that is already running and does not prevent the callback from rearming the timer. A callback running on another CPU can therefore continue after snd_mtpav_free() releases the lock and access the card-private state while the card is being torn down. It can also rearm the timer after timer_delete() has returned. Call timer_shutdown_sync() without holding chip->spinlock. This waits for any running callback to finish and prevents further rearming before the card-private mtpav state is released. | ||||
| CVE-2026-90129 | 1 Linux | 1 Linux Kernel | 2026-09-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: virtio_balloon: quiesce balloon work before device shutdown Commit 8bd2fa086a04 ("virtio: break and reset virtio devices on device_shutdown()") added a generic virtio bus .shutdown handler that breaks and resets every virtio device during device_shutdown(), i.e. on reboot and kexec. virtio_balloon provides no .shutdown of its own, so that generic path runs while the balloon's asynchronous work is still armed. Once the device has been broken, virtqueue_add_inbuf() in virtballoon_free_page_report() returns -EIO and trips its WARN_ON_ONCE(). On a kernel booted with panic_on_warn that turns an ordinary reboot, for example a kexec based upgrade, into a fatal panic in the middle of device_shutdown(), so the machine never reaches the new kernel. Relaxing that single WARN_ON_ONCE() would only hide the symptom: the inflate/deflate and OOM paths do not warn, they call wait_event(vb->acked, ...) and would instead block forever on a broken queue that can no longer complete. The device has to be quiesced, not just kept quiet. Add a .shutdown handler that quiesces the balloon via the shared virtballoon_quiesce() helper while the device is still alive, and only then breaks and resets it via virtio_device_shutdown(). Unlike virtballoon_remove() the balloon workqueue is not destroyed, as shutdown does not free the device and cancel_work_sync() together with stop_update already prevent any further work from being queued. | ||||
| CVE-2026-90130 | 1 Linux | 1 Linux Kernel | 2026-09-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: vdpa_sim: fix cleanup after worker creation failure vdpasim_create() leaves vdpasim->worker as an ERR_PTR when kthread_run_worker() fails. The error path then drops the device reference, which releases the partially initialized simulator. vdpasim_free() unconditionally passes the worker pointer to kthread_destroy_worker(), so the ERR_PTR is dereferenced and can trigger a general protection fault. Store the worker error, clear the pointer, and only clean up the worker when it was successfully initialized. Also make the release path tolerate partially initialized objects by guarding virtqueue and IOTLB cleanup, since the same release path can be reached from other initialization failures. I found this bug myself, though the patch was written with AI assistance. | ||||
| CVE-2026-90135 | 1 Linux | 1 Linux Kernel | 2026-09-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: add missing ref_tracker_dir_exit() to alloc_netdev_mqs() sashiko is reporting that trying to read /sys/kernel/debug/ref_tracker/* causes use-afer-free crash when either alloc_percpu() or dev_addr_init() in alloc_netdev_mqs() failed, for commit 4d92b95ff2f9 ("net: add net device refcount tracker infrastructure") added ref_tracker_dir_exit() to only free_netdev() path. | ||||
| CVE-2026-90136 | 1 Linux | 1 Linux Kernel | 2026-09-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: platform/x86/amd/hsmp: Reject negative power cap writes in hwmon hsmp_hwmon_write() takes the user-supplied hwmon value as a signed long and assigns "val / MICROWATT_PER_MILLIWATT" to msg.args[0], which is a __u32. MICROWATT_PER_MILLIWATT is an unsigned long, so a negative write to power1_cap (e.g. "echo -1 > power1_cap") is first converted to a huge unsigned value by the division and then stored into the u32 argument. As a result a nonsensical, multi-gigawatt socket power limit is sent to the SMU via HSMP_SET_SOCKET_POWER_LIMIT instead of the write being rejected. Reject negative values with -EINVAL before the conversion. Tested with HSMP enabled: CAP=$(dirname $(grep -l amd_hsmp_hwmon \ /sys/class/hwmon/hwmon*/name | head -1))/power1_cap # negative write echo -1000000 > $CAP ; echo "ret=$?" # valid positive write must still work echo 400000000 > $CAP ; echo "ret=$?" Before: # echo -1000000 > $CAP ; echo "ret=$?" ret=0 <- accepted; bogus limit sent to SMU # echo 400000000 > $CAP ; echo "ret=$?" ret=0 After: # echo -1000000 > $CAP ; echo "ret=$?" bash: echo: write error: Invalid argument ret=1 <- rejected with -EINVAL # echo 400000000 > $CAP ; echo "ret=$?" ret=0 <- valid write still works | ||||
| CVE-2026-90137 | 1 Linux | 1 Linux Kernel | 2026-09-18 | 7.7 High |
| In the Linux kernel, the following vulnerability has been resolved: platform/x86: hp-bioscfg: fix password encoding bounds check The password PSWD_ENCODINGS parser reads password_obj[elem + pos_values] while copying the supported password encodings from the ACPI package. The outer loop only guarantees that elem is within password_obj_count. The encoding count is bounded by MAX_ENCODINGS_SIZE, but that does not guarantee that the ACPI package contains enough entries for all elem + pos_values accesses. A malformed package can therefore declare a non-zero encoding count without providing enough string objects, causing the parser to read past the ACPI package array and pass an out-of-bounds string pointer and length to hp_convert_hexstr_to_str(). Add the same computed-index bounds check used by the other offset-based package parsing loops before reading password_obj[elem + pos_values]. | ||||
| CVE-2026-90138 | 1 Linux | 1 Linux Kernel | 2026-09-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: vsock: don't check the listener's sk_err in vsock_accept() Syzbot reported an issue which can be reproduced with these steps: r0 = socket(AF_VSOCK, SOCK_STREAM, 0) bind(r0, {VMADDR_CID_ANY, PORT}) connect(r0, {VMADDR_CID_LOCAL, PORT}) -> -1, EPROTO (self-connect) listen(r0, backlog) -> 0 r1 = socket(AF_VSOCK, SOCK_STREAM, 0) connect(r1, {VMADDR_CID_LOCAL, PORT}) -> 0 accept(r0) -> -1, EPROTO (stale sk_err) Basically, it creates a socket (r0) and triggers a self-connect after binding it. This self-connect fails with EPROTO because it loops back to r0 while the socket is still in the TCP_SYN_SENT state, causing it to be incorrectly dispatched to the connecting-client path. The unexpected packet type encountered there sets sk_err to EPROTO. After that, it invokes a listen() call on the same socket. This listen() call succeeds because the kernel's listening path never inspects or clears sk_err. Then, a new socket (r1) is created as a normal client and connects to r0. However, vsock_accept() rejects this incoming connection because the listener's sk_err still holds the EPROTO error from the earlier failed self-connect. This rejection causes the child socket created for r1's connection to never be freed on virtio or hyperv transports; only the VMCI transport implements pending_work to revisit and clean up a rejected socket. For a non-blocking connect(), vsock_connect() may return -EINPROGRESS immediately, and vsock_connect_timeout() can later set sk->sk_err asynchronously. Since no vsock transport ever sets sk_err on a socket while it is in TCP_LISTEN state, checking it in vsock_accept() serves no purpose and only carries forward errors left behind by earlier, unrelated connection attempts on the same socket. Remove the checks so accept() no longer rejects valid incoming connections because of a stale error, which also avoids the resource leak described above. | ||||
| CVE-2026-90235 | 1 Linux | 1 Linux Kernel | 2026-09-18 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: sunrpc: xprtsock: annotate shared socket callbacks with READ_ONCE/WRITE_ONCE xprtsock replaces and restores sk->sk_data_ready and sk->sk_write_space on live sockets with plain stores, and xs_udp_do_set_buffer_size() invokes sk->sk_write_space via a plain load. These callback pointers are shared with generic socket and protocol paths that may read or invoke them concurrently, so xprtsock needs the same READ_ONCE()/WRITE_ONCE() callback visibility contract that the validated 4022 family applied elsewhere. When SUNRPC takes over an AF_LOCAL, UDP, or TCP socket and later restores the lower-socket callbacks during teardown, another CPU may still hold an earlier callback snapshot. The plain replace/restore pattern leaves the same visibility hole as the validated 4022 family, so a stale snapshot can still invoke xs_data_ready() or xs_udp_write_space() after the live callback fields have already been restored to the lower-socket handlers. Use WRITE_ONCE() for the shared sk_data_ready and sk_write_space stores in xs_local_finish_connecting(), xs_udp_finish_connecting(), xs_tcp_finish_connecting(), and xs_restore_old_callbacks(). Use READ_ONCE() for the direct sk_write_space invocation in xs_udp_do_set_buffer_size(). This matches the required callback visibility contract while leaving adjacent sk_state_change and sk_error_report handling unchanged. | ||||
| CVE-2025-39682 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-09-18 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: tls: fix handling of zero-length records on the rx_list Each recvmsg() call must process either - only contiguous DATA records (any number of them) - one non-DATA record If the next record has different type than what has already been processed we break out of the main processing loop. If the record has already been decrypted (which may be the case for TLS 1.3 where we don't know type until decryption) we queue the pending record to the rx_list. Next recvmsg() will pick it up from there. Queuing the skb to rx_list after zero-copy decrypt is not possible, since in that case we decrypted directly to the user space buffer, and we don't have an skb to queue (darg.skb points to the ciphertext skb for access to metadata like length). Only data records are allowed zero-copy, and we break the processing loop after each non-data record. So we should never zero-copy and then find out that the record type has changed. The corner case we missed is when the initial record comes from rx_list, and it's zero length. | ||||
| CVE-2026-90161 | 1 Linux | 1 Linux Kernel | 2026-09-18 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: erofs: fix interlaced ztailpacking pclusters On-disk sizes of interlaced pclusters should be block-aligned, and ztailpacking interlaced pclusters should be invalid at all. Currently, mkfs.erofs won't generate any interlaced pcluster with ztailpacking enabled, so this doesn't affect any existing valid filesystems. However, crafted images can contain invalid interlaced ztailpacking pclusters, resulting in an out-of-bounds read from a kmap'd page and copying irrelevant kernel memory into userspace-visible page cache. | ||||
| CVE-2026-90207 | 1 Linux | 1 Linux Kernel | 2026-09-18 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: seq: midi: Serialize input teardown with event_input snd_midi_input_event() must not be running while a rawmidi substream is closing, since this can lead to the trigger state becoming out-of-step through this sequence in snd_rawmidi_input_trigger(): snd_rawmidi_input_trigger(up=0) snd_midi_input_event() -> snd_rawmidi_kernel_read() -> snd_rawmidi_input_trigger(up=1) -> cancel_work_sync() which ends with the underlying device being active unexpectedly. When this is called from close_substream(), further input can re-trigger the input event leaving it running after rawmidi_release_priv() has set rfile->rmidi to NULL which leads to: Unable to handle kernel NULL pointer dereference at virtual address 00000000000000b0 Call trace: snd_midi_input_event+0x3c/0x134 [snd_seq_midi] (P) snd_rawmidi_input_event_work+0x1c/0x2c process_one_work+0x150/0x3a4 worker_thread+0x190/0x318 Apply a similar approach to commit ef7607ab1c8ad ("ALSA: seq: midi: Serialize output teardown with event_input") which fixed the same issue in the output direction, but updated to use RCU following Takashi Iwai's proposed follow-on patch [1]. With this change in place, midisynth_unsubscribe() clears the input file so snd_midi_input_event() will not re-trigger the stream and will be quiesced by the cancel_work_sync() in snd_rawmidi_input_trigger(). [1] https://lore.kernel.org/linux-sound/20260813144224.753399-1-tiwai@suse.de/ | ||||
| CVE-2026-53266 | 1 Linux | 1 Linux Kernel | 2026-09-18 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: bridge: make ebt_snat ARP rewrite writable The ebtables SNAT target keeps the Ethernet source address rewrite behind skb_ensure_writable(skb, 0). This is intentional: at the bridge ebtables hooks the Ethernet header is addressed through skb_mac_header()/eth_hdr(), while skb->data points at the Ethernet payload. Asking skb_ensure_writable() for ETH_HLEN bytes would check the payload, not the Ethernet header, and would reintroduce the small packet regression fixed by commit 63137bc5882a. However, the optional ARP sender hardware address rewrite is different. It writes through skb_store_bits() at an offset relative to skb->data: skb_store_bits(skb, sizeof(struct arphdr), info->mac, ETH_ALEN) skb_header_pointer() only safely reads the ARP header; it does not make the later sender hardware address range writable. If that range is still held in a nonlinear skb fragment backed by a splice-imported file page, skb_store_bits() maps the frag page and copies the new MAC address directly into it. Ensure the ARP SHA range is writable before reading the ARP header and before calling skb_store_bits(). | ||||
| CVE-2026-90203 | 1 Linux | 1 Linux Kernel | 2026-09-18 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: Squashfs: check block offset is not negative If a negative offset is read off disk (for example the offset into the decompressed fragment block), this will cause squashfs_copy_data() to perform an out of bounds access. Fix by checking if offset is negative, and returning 0. This matches existing behaviour where an offset beyond the block returns 0 bytes copied. To trigger this out of bounds access requires a crafted Squashfs filesystem and CAP_SYS_ADMIN to mount it. Unprivileged users will not be able to mount such a filesystem, but once mounted, an unprivileged user can trigger the out of bounds access by reading the crafted file with the negative offset. | ||||
| CVE-2025-39964 | 2 Linux, Siemens | 5 Linux Kernel, Simatic S7-1500 Cpu 1518-4 Pn\/dp Mfp, Simatic S7-1500 Cpu 1518-4 Pn\/dp Mfp Firmware and 2 more | 2026-09-18 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: crypto: af_alg - Disallow concurrent writes in af_alg_sendmsg Issuing two writes to the same af_alg socket is bogus as the data will be interleaved in an unpredictable fashion. Furthermore, concurrent writes may create inconsistencies in the internal socket state. Disallow this by adding a new ctx->write field that indiciates exclusive ownership for writing. | ||||
| CVE-2026-90132 | 1 Linux | 1 Linux Kernel | 2026-09-18 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: ntfs: reject unprivileged writes to reserved $LX* xattrs Reject setxattr of the reserved $LXUID, $LXGID, $LXMOD and $LXDEV names from userspace unless the caller has CAP_SYS_ADMIN. | ||||
| CVE-2026-90146 | 1 Linux | 1 Linux Kernel | 2026-09-18 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf, xdp: move offload check into dev_xdp_install() bpf_xdp_link_update() calls dev_xdp_install() directly and skips dev_xdp_attach(), so the checks in dev_xdp_attach() do not run. A user can make an XDP link with a normal program and then swap in an offloaded or device-bound program with BPF_LINK_UPDATE, which puts it on the software path. dev_xdp_install() is the one place all three paths go through: "ip link set xdp" and BPF_LINK_CREATE reach it via dev_xdp_attach(), and BPF_LINK_UPDATE calls it directly. So move the program checks (offloaded, bound to another device, device-bound in generic mode, native vs generic, DEVMAP and CPUMAP) there, and keep only the netlink-flag check (XDP_FLAGS_UPDATE_IF_NOEXIST) in dev_xdp_attach(). | ||||
| CVE-2026-90149 | 1 Linux | 1 Linux Kernel | 2026-09-18 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: NFSv4/flexfiles: fix NULL dereference for NFSv4.0 data servers flexfiles accepts NFSv4.0 data servers, but two NFSv4 code paths assume the data server client has a session. Unlike NFSv4.1+, an NFSv4.0 client has no session (clp->cl_session is NULL; it uses clp->cl_slot_tbl), so I/O to a v4.0 flexfiles DS oopses: - nfs4_init_ds_session() dereferences clp->cl_session->session_state while seeding the DS lease. It also only seeds cl_lease_time when NFS4_SESSION_INITING is set; without a session that never happens, so cl_lease_time stays 0 and nfs4_renew_state() busy-loops, requeuing every 5 seconds. Seed the lease whenever there is no session and return before touching session state. - ff_layout_async_handle_error_v4() dereferences clp->cl_session->fc_slot_table on every DS I/O error. Fall back to the v4.0 transport slot table (clp->cl_slot_tbl) when there is no session. | ||||
| CVE-2026-90153 | 1 Linux | 1 Linux Kernel | 2026-09-18 | 8.1 High |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: bound smb_check_perm_dacl() ACE walks by DACL size smb_check_perm_dacl() validates that the DACL fits inside the NT security descriptor, but then bounds its two ACE walks by the remaining NTSD length (acl_size) rather than the DACL's declared size (pdacl_size). When pdacl->size is smaller than the trailing NTSD buffer, bytes after the declared DACL boundary - still inside the stored security descriptor - are parsed as ACEs during access checks. A crafted DACL can place an access-granting ACE beyond pdacl->size, and the current code accepts it during SMB2_CREATE access validation, while parse_dacl() and smb_inherit_dacl() stop at pdacl_size. Bound both ACE walks by pdacl_size to match the DACL boundary semantics used elsewhere in the server. Validation: - semantic KUnit harness shows the post-boundary ACE is selected before the fix and rejected (EACCES) after it - linux master (7.2-rc6), x86_64 | ||||
| CVE-2026-90177 | 1 Linux | 1 Linux Kernel | 2026-09-18 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Check pointer type for all atomic RMW paths Atomic RMW verification records an instruction pointer type only when the current destination is PTR_TO_ARENA. A second path can therefore reach the same instruction with an ordinary pointer without comparing it against the saved arena type. The post-verification fixup uses the saved type to rewrite the instruction to BPF_PROBE_ATOMIC for every path. Record the actual destination type for all atomic RMW paths so the existing mismatch check rejects incompatible uses of one instruction. | ||||
| CVE-2026-93046 | 1 Linux | 1 Linux Kernel | 2026-09-18 | 7 High |
| In the Linux kernel, the following vulnerability has been resolved: software node: Fix software_node_get_reference_args() with index -1 The bounds check for the index passed to software_node_get_reference_args() was failing when passed UINT_MAX, this in turn would lead to an out of bound access in the property array. Fix the bound check to also cover the UINT_MAX case. | ||||