Export limit exceeded: 397524 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (397524 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-93816 | 1 Linux | 1 Linux Kernel | 2026-09-24 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: f2fs: validate inline dentry name lengths before conversion Inline dentry conversion copies names out of the inline dentry area before checking that each recorded name length fits in the available filename slots. A corrupted image can therefore make the conversion path read past the inline filename storage while building the regular dentry block. Validate each inline dentry name length against the inline filename area before copying it. | ||||
| CVE-2026-93815 | 1 Linux | 1 Linux Kernel | 2026-09-24 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: au1000: move free_irq out of the close-time spinlocked section au1000_close() calls free_irq() while aup->lock is still held with spin_lock_irqsave(). free_irq() can sleep because it takes the IRQ descriptor request mutex, so it does not belong inside the close-time spinlocked section. This was found by our static analysis tool and then confirmed by manual review of the in-tree au1000_close() .ndo_stop path. The reviewed path keeps aup->lock held across the MAC reset, queue stop and free_irq(dev->irq, dev). A directed runtime validation kept that ndo_stop carrier and the same free_irq(dev->irq, dev) operation under the driver lock. Lockdep reported "BUG: sleeping function called from invalid context" and "Invalid wait context" while free_irq() was taking desc->request_mutex, with au1000_close() and free_irq() on the stack. Drop aup->lock before freeing the IRQ. The protected close-time work still stops the device and queue before IRQ teardown, but the sleepable IRQ core path now runs outside the spinlocked section. | ||||
| CVE-2026-93814 | 1 Linux | 1 Linux Kernel | 2026-09-24 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: spi: core: Abort active target transfer on controller suspend When an SPI controller operating in target mode has a transfer in progress at the time of system suspend, the suspend path proceeds without aborting the ongoing transfer. This can leave the hardware in an inconsistent state, potentially causing the system to hang or fail to resume cleanly. Fix this by invoking the controller's target_abort callback from spi_controller_suspend() when the controller is in target mode and the callback is registered. This ensures any active target transfer is cleanly terminated before the controller is suspended. | ||||
| CVE-2026-93813 | 1 Linux | 1 Linux Kernel | 2026-09-24 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: tree-checker: validate INODE_REF's namelen [BUG] A crafted btrfs image can trigger the following crash: BUG: unable to handle page fault for address: ffffd1dc42884000 #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page CPU: 9 UID: 0 PID: 1034 Comm: poc Not tainted 7.1.0-rc4-custom+ #383 PREEMPT(full) 46af0a92938a63be7132e0dfd71e62327c51d5c2 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS unknown 02/02/2022 RIP: 0010:memcpy+0xc/0x10 Call Trace: <TASK> read_extent_buffer+0xe4/0x100 [btrfs 3cf0785dd58fec8c5ff84633b772f17ce1f92a8f] btrfs_get_name+0x15e/0x1e0 [btrfs 3cf0785dd58fec8c5ff84633b772f17ce1f92a8f] reconnect_path+0x165/0x390 exportfs_decode_fh_raw+0x337/0x400 ? drop_caches_sysctl_handler+0xb0/0xb0 </TASK> ---[ end trace 0000000000000000 ]--- RIP: 0010:memcpy+0xc/0x10 Kernel panic - not syncing: Fatal exception [CAUSE] TThe crafted image has the following corrupted INODE_REF item: item 9 key (258 INODE_REF 257) itemoff 11544 itemsize 4106 index 2 namelen 4096 name: d\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000 The itemsize matches the namelen, but the namelen is 4096, way larger than normal name length limit (BTRFS_NAME_LEN, 255). Meanwhile the memory of the @name is only 255 byte sized, this will cause out-of-boundary access, and cause the above crash. [FIX] Add extra namelen verification for INODE_REF, just like what we have done in ROOT_REF checks. Now the crafted image can be rejected gracefully: BTRFS critical (device dm-2): corrupt leaf: root=5 block=30572544 slot=14 ino=259, invalid inode ref name length, has 4096 expect [1, 255] BTRFS error (device dm-2): read time tree block corruption detected on logical 30572544 mirror 2 [ Rebase, add a Link: tag, add an simple cause analyze ] | ||||
| CVE-2026-93812 | 1 Linux | 1 Linux Kernel | 2026-09-24 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix sd_ndr.data memory leak in ksmbd_vfs_set_sd_xattr ndr_encode_v4_ntacl() allocates sd_ndr.data via kzalloc() at entry. If any subsequent ndr_write_*() call returns error during encoding, the allocated sd_ndr.data won't be freed and causes memory leak. Move kfree(sd_ndr.data) into out label to ensure the buffer gets released on all success and error return paths. | ||||
| CVE-2026-79764 | 2026-09-24 | 7.7 High | ||
| Termix is a web-based server management platform with SSH terminal, tunneling, and file editing capabilities. From 2.5.0 until 2.5.1, the /homepage/proxy endpoint accepts an authenticated user's url query parameter and passes it to http.get or https.get without destination restrictions. In src/backend/database/routes/homepage-proxy-routes.ts, new URL performs only syntactic validation, allowing requests to loopback, RFC1918, link-local, and cloud metadata destinations. The endpoint returns the complete fetched JSON response, so a low-privilege or self-registered account can exfiltrate internal service data and cloud credentials. This issue is fixed in version 2.5.1. | ||||
| CVE-2026-93811 | 1 Linux | 1 Linux Kernel | 2026-09-24 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: Fix acl.sd_buf memory leak and invalid sd_size error handling 1. When ndr_decode_v4_ntacl() fails, the code jumped to free_n_data which only freed n.data, skipping kfree(acl.sd_buf) and leaking the buffer. Zero-initialize struct xattr_ntacl acl, reorder error labels to out_free to release acl.sd_buf on all error paths. 2. if (acl.sd_size < sizeof(struct smb_ntsd)) is true, original code returned success without freeing sd_buf and left stale *pntsd. Set rc = -EINVAL before jumping to out_free to return error code and free buffer. | ||||
| CVE-2026-93810 | 1 Linux | 1 Linux Kernel | 2026-09-24 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: cachefiles: Fix double fput Fix a double fput() in error handling in cachefiles_create_tmpfile(). | ||||
| CVE-2026-93809 | 1 Linux | 1 Linux Kernel | 2026-09-24 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: flush pending RCU callbacks on module unload Call rcu_barrier() in module exit to wait for outstanding call_rcu() callbacks before freeing module text, preventing late callback execution in freed memory. BUG: unable to handle page fault for address: ffffffffc1d59c40 PGD 6a12067 P4D 6a12067 PUD 6a14067 PMD 13698b067 PTE 0 Oops: 0010 [#1] SMP NOPTI RIP: 0010:0xffffffffc1d59c40 Code: Unable to access opcode bytes at RIP 0xffffffffc1d59c16. RSP: 0018:ffffc900198c0f28 EFLAGS: 00010286 RAX: ffffffffc1d59c40 RBX: ffff897c7d6b61c0 RCX: ffff88826aff4590 RDX: ffff8884d8b35490 RSI: ffffc900198c0f30 RDI: ffff88812af67290 RBP: 000000000000000a (DONE segment entries) R08: 0000000000000000 R09: 0000000000000100 R10: 0000000000000000 R11: ffffffff82a06100 R12: ffff88811a4e3700 R13: 0000000000000000 R14: ffff897c7d6b6270 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff897c7d680000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffffffc1d59c16 CR3: 00000104a980a001 CR4: 0000000002770ee0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe07f0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: <IRQ> ? rcu_do_batch+0x163/0x450 ? rcu_core+0x177/0x1c0 ? __do_softirq+0xc1/0x280 ? asm_call_irq_on_stack+0xf/0x20 </IRQ> ? do_softirq_own_stack+0x37/0x50 ? irq_exit_rcu+0xc4/0x100 ? sysvec_apic_timer_interrupt+0x36/0x80 ? asm_sysvec_apic_timer_interrupt+0x12/0x20 ? cpuidle_enter_state+0xd4/0x360 ? cpuidle_enter+0x29/0x40 ? cpuidle_idle_call+0x108/0x1a0 ? do_idle+0x77/0xf0 ? cpu_startup_entry+0x19/0x20 ? secondary_startup_64_no_verify+0xbf/0xcb (cherry picked from commit feaa5039f6c12acc9aa934c2d45dcd251a12c69f) | ||||
| CVE-2026-93808 | 1 Linux | 1 Linux Kernel | 2026-09-24 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: usb-audio: caiaq: validate EP1 reply lengths usb_ep1_command_reply_dispatch() uses buf[0] as a command byte and then reads command-specific fixed items from the same URB buffer. Several paths use buf + 1, buf[1], buf[2], or buf + 3 without first proving that urb->actual_length contains those bytes. Add per-command length checks, use a payload length derived from the bytes after the command byte for the control-state copy, and reject short analog input payloads before the input helper reads fixed offsets from the EP1 reply. | ||||
| CVE-2026-93807 | 1 Linux | 1 Linux Kernel | 2026-09-24 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: rsi: avoid reading TKIP MIC keys for non-TKIP ciphers rsi_hal_load_key() copies tx_mic_key and rx_mic_key from data[16] and data[24] whenever key data is present. Those offsets are only part of the 32-byte TKIP key layout. Shorter keys used by other ciphers, such as CCMP, do not provide those bytes, so the unconditional copies can read past the supplied key buffer. Only copy the MIC keys for TKIP, and reject malformed TKIP keys that are shorter than the expected 32-byte layout. [drop useless length check] | ||||
| CVE-2026-93806 | 1 Linux | 1 Linux Kernel | 2026-09-24 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: cfg80211: validate assoc response length before status and IE access cfg80211_rx_assoc_resp() initialises the status and response-IE fields of cfg80211_connect_resp_params from the management frame before proving that the frame is long enough for those offsets. S1G and regular association responses also have different IE offsets, but the S1G path only patched resp_ie after the unsafe initialiser had already run. Defer resp_ie, resp_ie_len, and status to after the link-iteration loop. Use a bool to remember whether the frame is S1G, then validate the appropriate minimum length and set all three fields in a single if/else block. Funnel short-frame and SME-reject cleanup through a shared free_bss label for the abandon paths. | ||||
| CVE-2026-93805 | 1 Linux | 1 Linux Kernel | 2026-09-24 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: cfg80211: validate rx/tx MLME callback frame lengths before access cfg80211_rx_mlme_mgmt() and cfg80211_tx_mlme_mgmt() call tracepoints before rejecting frames shorter than the frame-control field. After that, they only require len >= 2 before dispatching into subtype handlers that assume their fixed fields are present. The frames that trip this are not shorter than 2 bytes; they are short relative to their subtype. mwifiex is a concrete in-tree example on the length side: mwifiex_process_mgmt_packet() only requires a 4-address ieee80211_hdr plus the 2-byte firmware length prefix before handing the frame to cfg80211_rx_mlme_mgmt(). After stripping the length prefix and removing addr4, pkt_len can be exactly 24: a bare 3-address management header with no reason-code body. The existing WARN_ON(len < 2) does not fire on such a frame, and cfg80211_process_deauth() then reads u.deauth.reason_code as a two-byte access starting at offset 24, immediately past the 24-byte buffer. Add a frame-control length gate, then validate each subtype's minimum frame size in an if/else-if chain that mirrors the dispatch logic. Trace only after the frame is known to be well-formed. Side effects of this change: - The WARN_ON(len < 2) is dropped. It only guarded the frame_control read, never the subtype fixed fields, and it does not fire on the frames that actually trigger the out-of-bounds read (which are >= 2). The len >= 2 check is kept as the guard before dereferencing frame_control, but without the warning: these are exported callbacks and a malformed frame from a driver should be dropped silently rather than backtraced. - cfg80211_tx_mlme_mgmt() previously routed every non-deauth subtype through disassociation handling; it now silently ignores unrecognised subtypes. | ||||
| CVE-2026-93804 | 1 Linux | 1 Linux Kernel | 2026-09-24 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: ibss: wait for in-flight TX on disconnect While leaving an IBSS in ieee80211_ibss_disconnect() mac80211 flushes stations, turns the carrier off and immediately tells the driver to leave as well. While there may be synchronize_net() in station flush and in this code later, packets can still be transmitted due to cross-CPU race conditions after carrier off is set. Therefore, it's possible for a race to happen where a TX to the driver occurs while or after telling it to leave the IBSS. This can be confusing to drivers, and in the case of iwlwifi leads to an attempt to use invalid queues. Move netif_carrier_off() to occur before sta_info_flush() during IBSS disconnect, and add synchronize_net() if flushing didn't, so that the synchronize_net() always happens between turning the carrier off and telling the driver, avoiding this race. | ||||
| CVE-2026-93803 | 1 Linux | 1 Linux Kernel | 2026-09-24 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: libipw: fix key index receive bound checks libipw_rx() reads skb->data[hdrlen + 3] to extract the WEP key index in both the software-decrypt key selection path and the hardware-decrypted IV/ICV strip path. In both places the existing guard only checks skb->len >= hdrlen + 3, which proves bytes up to hdrlen + 2 but not the byte at hdrlen + 3. Require hdrlen + 4 bytes before reading that item in both paths. This is a local source-boundary check only; it does not change the key index semantics. | ||||
| CVE-2026-93802 | 1 Linux | 1 Linux Kernel | 2026-09-24 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: rsi: validate beacon length before fixed buffer copy rsi_prepare_beacon() copies the mac80211 beacon frame after FRAME_DESC_SZ into a management skb whose usable tailroom may be smaller than MAX_MGMT_PKT_SIZE after alignment. Validate the beacon length against the actual tailroom before the copy and skb_put(). Leave ownership of the management skb with the caller on error, matching the existing rsi_send_beacon() cleanup path. | ||||
| CVE-2026-93801 | 1 Linux | 1 Linux Kernel | 2026-09-24 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: smb/client: zero-initialize stack-allocated cifs_open_info_data Stack-allocated cifs_open_info_data may contain random data. This can make some fields have wrong value if they are not set later. | ||||
| CVE-2026-93800 | 1 Linux | 1 Linux Kernel | 2026-09-24 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: fix use-after-free on reloc root after error in insert_dirty_subvol() If during relocation we fail in insert_dirty_subvol() because btrfs_update_reloc_root() returned an error, we will leave a root's reloc_root field pointing to a reloc root that was freed instead of NULL, resulting later in a use-after-free, or double free attempt during unmount. The sequence of steps is this: 1) During relocation the call to btrfs_update_reloc_root() in insert_dirty_subvol() fails, so insert_dirty_subvol() returns the error to merge_reloc_root() without adding the root to the list rc->dirty_subvol_roots; 2) Then merge_reloc_root() aborts the current transaction because insert_dirty_subvol() returned an error; 3) Up the call chain, merge_reloc_roots() gets the error, adds the reloc root for root X to the local reloc_roots list and jumps to the 'out' label, where it calls free_reloc_roots() to free all the reloc roots in the local reloc_roots list. This frees the reloc root for root X; 4) We go up the call chain to relocate_block_group() which calls clean_dirty_subvols() to go over dirty roots and set their ->reloc_root field to NULL, but root X is not in the dirty_subvol_roots list, so its ->reloc_root still points to a reloc root; 5) Relocation finishes, with an error and a transaction abort, but the ->reloc_root field for root X still points to the reloc root that was freed in step 3; 6) When unmounting the fs we end up calling: btrfs_free_fs_roots() btrfs_drop_and_free_fs_root() --> calls btrfs_put_root() against root X's ->reloc_root which is not NULL and points to the already freed reloc root in step 4 above Resulting in a use-after-free to a double free attempt. Syzbot reported this with the following dmesg/syslog: [ 106.004389][ T5339] BTRFS error (device loop0 state A): Transaction aborted (error -5) [ 106.014266][ T5339] BTRFS: error (device loop0 state A) in merge_reloc_root:1655: errno=-5 IO failure [ 106.021891][ T1061] BTRFS error (device loop0 state A): error while writing out transaction: -5 [ 106.026964][ T1061] BTRFS warning (device loop0 state A): Skipping commit of aborted transaction. [ 106.033807][ T5340] BTRFS error (device loop0 state A): bdev /dev/loop0 errs: wr 3, rd 0, flush 0, corrupt 0, gen 0 [ 106.039265][ T1061] BTRFS: error (device loop0 state A) in cleanup_transaction:2067: errno=-5 IO failure [ 106.044382][ T5339] BTRFS info (device loop0 state EA): forced readonly [ 106.074329][ T5339] BTRFS: error (device loop0 state EA) in merge_reloc_roots:1887: errno=-5 IO failure [ 106.081004][ T5356] BTRFS info (device loop0 state EA): scrub: started on devid 1 [ 106.085611][ T5339] BTRFS info (device loop0 state EA): balance: ended with status: -30 [ 106.089517][ T5356] BTRFS info (device loop0 state EA): scrub: not finished on devid 1 with status: -30 [ 106.662365][ T5338] BTRFS info (device loop0 state EA): last unmount of filesystem 3a375e4e-b156-4d76-a2ad-16e198ce1409 [ 106.682946][ T5338] ================================================================== [ 106.686574][ T5338] BUG: KASAN: slab-use-after-free in btrfs_put_root+0x2f/0x250 [ 106.690090][ T5338] Write of size 4 at addr ffff88803f978630 by task syz.0.0/5338 [ 106.693173][ T5338] [ 106.694279][ T5338] CPU: 0 UID: 0 PID: 5338 Comm: syz.0.0 Not tainted syzkaller #0 PREEMPT(full) [ 106.694293][ T5338] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 [ 106.694300][ T5338] Call Trace: [ 106.694308][ T5338] <TASK> [ 106.694314][ T5338] dump_stack_lvl+0xe8/0x150 [ 106.694331][ T5338] print_address_description+0x55/0x1e0 [ 106.694343][ T5338] ? btrfs_put_root+0x2f/0x250 [ 106.694358][ T5338] print_report+0x58/0x70 [ 106. ---truncated--- | ||||
| CVE-2026-93799 | 1 Linux | 1 Linux Kernel | 2026-09-24 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: iwlwifi: mvm: validate sta_id in BA window status notif BA_WINDOW_STATUS_NOTIFICATION_ID extracts a 5-bit sta_id from the firmware notification and uses it to index fw_id_to_mac_id[] without bounds checking. Validate sta_id before array access to prevent out-of-bounds indexing. | ||||
| CVE-2026-93798 | 1 Linux | 1 Linux Kernel | 2026-09-24 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: fix reloc root cleanup in merge_reloc_roots() If the root we got has zero root refs in its root item, we are resetting the root's ->reloc_root without using barriers like we do everywhere else. Sashiko complained about this while reviewing another patch, and it's correct (see the Link tag below). Also, we should not clear BTRFS_ROOT_DEAD_RELOC_TREE from the root unless the root points to the reloc root we have. Fix this by using clear_reloc_root(), which issues the memory barrier after setting the root's ->reloc_root to NULL and before clearing the bit BTRFS_ROOT_DEAD_RELOC_TREE from the root. | ||||