Export limit exceeded: 395650 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (395650 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-92504 | 1 Linux | 1 Linux Kernel | 2026-09-20 | 7 High |
| In the Linux kernel, the following vulnerability has been resolved: thermal: intel: int3400: clean up ODVP on probe failures evaluate_odvp() creates per-ODVP sysfs files before the thermal zone and later probe resources are registered. The current unwind path only calls cleanup_odvp() from the late sysfs failure path, so failures after evaluate_odvp() but before that label, including thermal_tripless_zone_device_register() failures, leave the ODVP files and storage behind. Move the ODVP cleanup to the common ART/TRT unwind path so every failure after evaluate_odvp() releases the ODVP state. Also clear the cached ODVP pointers in cleanup_odvp(), because evaluate_odvp() can already call it for partial setup failures while probe continues. | ||||
| CVE-2026-92511 | 1 Linux | 1 Linux Kernel | 2026-09-20 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/core: Fix potential use after free in ib_destroy_cq_user() When accessing a CQ via the netlink path the only synchronization mechanism for the said CQ is rdma_restrack_get(). Currently, rdma_restrack_del() is invoked at the end of ib_destroy_cq_user(), which is too late, since by that point vendor-specific resources associated with the CQ might already be freed. This can leave a short window where the CQ remains accessible through restrack, leading to a potential use-after-free. Fix this by moving the rdma_restrack_begin_del() call to the start of ib_destroy_cq_user(), ensuring that the CQ is removed from restrack before its internal resources are released. This guarantees that no new users hold references to a CQ that is in the process of destruction. In addition, this change preserves the intended inverted order between create and destroy routines: resources are added to restrack at the end of successful creation, and hence shall be removed from the restrack first thing during the destruction flow, which keeps the lifecycle management consistent and predictable. | ||||
| CVE-2026-94054 | 1 Exim | 1 Exim | 2026-09-20 | 7 High |
| Exim before 4.100.1, when Proxy-Protocol is used with an attacker-controlled proxy, has an out-of-bounds write. | ||||
| CVE-2026-94055 | 1 Exim | 1 Exim | 2026-09-20 | 3.7 Low |
| Exim before 4.100.1, when certain non-default TLS settings are used with GnuTLS, has a use-after-free. | ||||
| CVE-2026-94056 | 1 Exim | 1 Exim | 2026-09-20 | 7.5 High |
| Exim before 4.100.1, when Proxy-Protocol is used with an attacker-controlled proxy, allows attackers to read certain uninitialized data from stack memory. | ||||
| CVE-2026-94057 | 1 Exim | 1 Exim | 2026-09-20 | 4 Medium |
| Exim before 4.100.1 allows SMTP smuggling in which the received message does not match any sent message, and instead depends on crafted data sent after a rejection during DATA processing. | ||||
| CVE-2026-84070 | 1 Ibm | 1 Guardium Data Protection | 2026-09-20 | 8.9 High |
| IBM Guardium Data Protection 12.2 could allow a remote authenticated attacker to execute arbitrary code due to improper neutralization of input during web page generation. | ||||
| CVE-2026-84073 | 1 Ibm | 1 Guardium Data Protection | 2026-09-20 | 9.1 Critical |
| IBM Guardium Data Protection 12.2 could allow a remote authenticated attacker to execute arbitrary SQL commands due to improper neutralization of special elements used in an SQL command. | ||||
| CVE-2026-93095 | 1 Linux | 1 Linux Kernel | 2026-09-20 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: hfsplus: validate thread record before delete key rebuild hfsplus_delete_cat() is called with str == NULL when the last open reference to an unlinked HFS+ hardlink backing inode is closed. In that case, the function finds the catalog thread by CNID and rebuilds the catalog key from thread.nodeName. That reconstruction path reads thread.nodeName.length directly from the catalog B-tree into fd.search_key and then copies length * 2 bytes into fd.search_key->cat.name.unicode. It does not first check that the found record is a thread record or that its size matches the thread name. A corrupted image can therefore provide an oversized thread name length and make hfs_bnode_read() write past the catalog search-key allocation. Read the CNID record through hfsplus_brec_read_cat(), which bounds the record read to sizeof(hfsplus_cat_entry) and verifies that a thread record's size exactly matches nodeName.length. Together, these checks ensure an accepted thread name fits HFSPLUS_MAX_STRLEN. Reject non-thread records before building the delete key from the validated thread name. Share the thread-record-type helper between hfsplus_find_cat() and hfsplus_delete_cat(). | ||||
| CVE-2026-93121 | 1 Linux | 1 Linux Kernel | 2026-09-20 | 7 High |
| In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_fs: Fix fence cleanup in ffs_dmabuf_transfer() error paths The error paths for endpoint-disabled (ESHUTDOWN) and request-allocation failure (ENOMEM) in ffs_dmabuf_transfer() jump to err_fence_put which calls dma_fence_put() on the fence. However, at that point the fence has only been kmalloc'd — dma_fence_init() has not been called yet, so the refcount and the fence ops are uninitialized. Calling dma_fence_put() on such an object leads to undefined behavior. Use kfree() instead, since the fence is just a plain allocation at this stage, and rename the label to err_fence_free to reflect the actual cleanup action. | ||||
| CVE-2026-93144 | 1 Linux | 1 Linux Kernel | 2026-09-20 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Reject writes through untrusted BTF pointers check_ptr_to_btf_access() lets program-type btf_struct_access callbacks validate writes before the default BTF access path rejects non-read accesses. That bypasses the read-only policy for untrusted BTF pointers created by helpers such as bpf_rdonly_cast(). Reject non-read accesses through PTR_UNTRUSTED BTF pointers at the common entry point, before the callback branch to handle all cases. | ||||
| CVE-2026-88622 | 1 Nuuo | 1 Network Video Recorder | 2026-09-20 | 8.8 High |
| NUUO Network Video Recorder 2.0.0 is vulnerable to Command Injection in handle_import_privilege.php. | ||||
| CVE-2026-88623 | 1 Nuuo | 1 Network Video Recorder | 2026-09-20 | N/A |
| NUUO Network Video Recorder 2.0.0 is vulnerable to arbitrary file read. In up.php, the url parameter submitted by the user via POST is received, and fopen() is used to open the URL in binary read-only mode. The content is then written to the /tmp/ directory, with the filename derived from basename() of the URL. This operation requires no authentication. | ||||
| CVE-2026-85574 | 2026-09-20 | 8.0 High | ||
| The Unbounce Landing Pages WordPress plugin before 1.1.5 does not perform any authorisation check when updating the configuration its front-end proxy relies on, allowing any authenticated user, such as a subscriber, to point that proxy at a host they control and have arbitrary content served from the site's own origin. | ||||
| CVE-2026-76901 | 1 1panel-dev | 1 Cordyscrm | 2026-09-20 | 5.8 Medium |
| CordysCRM is an open source AI-powered customer relationship management system that supports private deployment. Prior to 1.7.4, GET /pool/lead/get/{id} in PoolClueController.get and GET /pool/account/get/{id} in PoolCustomerController.get use bare pool-read permission checks without the CsPermission resourceId binding that enforces per-record data scope. An authenticated user with the ordinary CLUE_MANAGEMENT_POOL:READ or CUSTOMER_MANAGEMENT_POOL:READ permission can supply another record's id and cause unscoped primary-key getters to return leads or accounts owned by other users, departments, or organizations. Exposed data includes contact names, phone numbers, owner and department attribution, and custom field values. This issue is fixed in version 1.7.4. | ||||
| CVE-2026-76900 | 1 1panel-dev | 1 Cordyscrm | 2026-09-20 | 6.8 Medium |
| CordysCRM is an open source AI-powered customer relationship management system that supports private deployment. In version 1.7.3, ApprovalResourceService.sendWebHook reads WebHookConfig.webHookUrl from stored approval-node configuration and passes it through ApprovalFlowService.updateApprovalPostField to HttpClientUtils without the SSRF validation used by the optional testConnect path. A user with PROCESS_SETTING_ADD can configure an internal URL through POST /approval-flow/add and cause the server to request it when POST /approval-action/approve executes the approval action, enabling cloud metadata access, internal network reconnaissance, and interaction with reachable internal services. This issue is fixed in version 1.7.4. | ||||
| CVE-2026-76902 | 1 1panel-dev | 1 Cordyscrm | 2026-09-20 | 5 Medium |
| CordysCRM is an open source AI-powered customer relationship management system that supports private deployment. Prior to 1.7.4, ShiroFilter configures /attachment/preview/{id} and /pic/preview/{id} as anonymous, and both routes call AttachmentService.getResource, which performs a bare primary-key lookup without ownership, organization, or permission checks. An unauthenticated caller who guesses or observes an id generated by IDGenerator.nextStr can download files uploaded by users in other organizations because the stored organization id is used only to locate the file rather than authorize the caller. This issue is fixed in version 1.7.4. | ||||
| CVE-2026-76899 | 1 1panel-dev | 1 Cordyscrm | 2026-09-20 | 5.7 Medium |
| CordysCRM is an open source AI-powered customer relationship management system that supports private deployment. From 1.7.0 until 1.7.4, POST /account-pool/page allows an authenticated caller with MODULE_SETTING_UPDATE to place an arbitrary database function in SortRequest.name because CustomerPoolController.page omits Spring request validation, SortRequest.getName relies on an incomplete blacklist, and the CommonMapper.xml sort fragment inserts ${sortName} into an ORDER BY clause. Functions such as extractvalue and updatexml bypass the blacklist and can expose database values through an error oracle when the query returns at least one row. This issue is fixed in version 1.7.4. | ||||
| CVE-2026-71418 | 1 Oisf | 1 Suricata | 2026-09-20 | 7.5 High |
| Suricata is a network Intrusion Detection System, Intrusion Prevention System and Network Security Monitoring engine. From 8.0.0 until 8.0.6, DNS-over-HTTP/2 processing in rust/src/http2/http2.rs retains previously processed HTTP/2 DATA frame contents instead of clearing the internal buffer. Multiple DATA frames with the EndOfStream flag set can grow the buffer to its 65 KiB limit while causing all prior contents to be processed again, producing quadratic CPU complexity, degraded packet processing, loss of monitoring visibility, or denial of service. This issue is fixed in version 8.0.6. | ||||
| CVE-2026-71855 | 1 Oisf | 1 Suricata | 2026-09-20 | 5.9 Medium |
| Suricata is a network Intrusion Detection System, Intrusion Prevention System and Network Security Monitoring engine. Prior to 7.0.17 and 8.0.6, src/flow-hash.c can treat an IPv4 and IPv6 flow as equal without comparing the IP family when their raw address words, ports, protocol, VLAN, recursion level, live device, and hash bucket align. An IPv6 packet can therefore reuse IPv4 flow state or the reverse, causing incorrect flowbit state, detection bypass, or IP-only bypass. This issue is fixed in versions 8.0.6 and 7.0.17. | ||||