Export limit exceeded: 395115 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (395115 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-89956 | 1 Linux | 1 Linux Kernel | 2026-09-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: s390/vfio-ap: Fix missing lock required to access list of ap_matrix_mdev objects In order to traverse or add/remove ap_matrix_mdev objects in the matrix_dev->mdev_list, the matrix_dev->guests_lock mutex must be held. There are two functions that access the list without holding the mutex: vfio_ap_mdev_probe function ~~~~~~~~~~~~~~~~~~~~~~~~~~~ The vfio_ap_mdev_probe function uses the matrix_dev->mdevs_lock mutex to guard the add of a newly created ap_matrix_mdev object to the matrix_dev->mdev_list. This mutex does not protect list access; its purpose is to guard against concurrent access to fields contained in an ap_matrix_mdev object. This could lead to kernel memory corruption or use-after-free if another mdev is created or removed concurrently. The adding of an ap_matrix_mdev object to matrix_dev->mdev_list is now guarded by the matrix_dev->guests_lock which is the correct way to protect against concurrent mdev_list access. Also removed the following two lines of code because the matrix_mdev is allocated via vfio_alloc_device macro which uses kzalloc, so req_trigger and cfg_chg_trigger are already zero-initialised when the struct is allocated before the call to vfio_register_emulated_iommu_dev. This prevents a window whereby these triggers are set to NULL after the device is exposed to userspace. matrix_mdev->req_trigger = NULL; matrix_mdev->cfg_chg_trigger = NULL; vfio_ap_mdev_for_queue function ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ The status_show function that supports display of the status attribute of the devices in /sys/bus/ap/devices calls the vfio_ap_mdev_for_queue function which iterates the matrix_dev->mdev_list to find the object representing the queue device whose status is to be displayed. In order to traverse this list, the matrix_dev->guests_lock mutex must be held. To fix this, the guests_lock mutex is taken prior to taking the matrix_dev->mdevs_lock mutex in the status_show function. It is taken there rather than the vfio_ap_mdev_for_queue function - where it is needed - because it must be taken prior to the mdevs_lock mutex in order to adhere to the proper locking order and prevent a lockdep splat; also because the mdevs_lock is needed there to access fields within the matrix_mdev object in that function. See the vfio-ap-locking.rst in the linux kernel tree. | ||||
| CVE-2026-89959 | 1 Linux | 1 Linux Kernel | 2026-09-18 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: s390/vfio-ap: Fix control domain removal in vfio_ap_mdev_cfg_remove The vfio_ap_config_remove function uses the bitmap_andnot function to clear bits from the matrix_mdev->matrix.adm bitmap (specifies the control domains assigned to the mdev). This prevents the explicitly unplugged control domains from being removed the KVM guest. The bitmap_and function is used instead. | ||||
| CVE-2026-89964 | 1 Linux | 1 Linux Kernel | 2026-09-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: parisc: eisa: Fix infinite loop when parsing invalid IRQ value When an invalid value is passed via the "eisa_irq_edge=" kernel command line parameter (e.g. "eisa_irq_edge=16,5"), eisa_irq_setup() prints an error message and continues without advancing the current position. As a result the same invalid value is parsed again and again, causing an infinite loop while the kernel boots. Advance to the next comma-separated entry, or stop parsing when there is no next entry, before continuing so that the remaining entries are processed normally. | ||||
| CVE-2026-89965 | 1 Linux | 1 Linux Kernel | 2026-09-18 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: nvdimm/btt: reject an arena whose nfree is below the lane count The BTT info block's nfree field, the number of reserve free blocks, is read from the medium without validation. btt_freelist_init() and btt_rtt_init() size the per-lane freelist[] and rtt[] arrays by nfree, but the I/O path indexes them by the lane from nd_region_acquire_lane(), which is bounded by nd_region->num_lanes (ND_MAX_LANES), not by nfree. A crafted or foreign arena whose nfree is below the lane count makes freelist[lane]/rtt[lane] run past the allocation: an out-of-bounds write. btt.rst documents the nlanes = min(nfree, num_cpus) invariant, which the code does not currently honor: num_lanes is ND_MAX_LANES regardless of nfree. Reject an arena whose nfree is below num_lanes at discovery, before the per-lane arrays are allocated, enforcing that invariant. | ||||
| CVE-2026-89966 | 1 Linux | 1 Linux Kernel | 2026-09-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: mm/hugetlb_cma: fix null nodemask dereference in hugetlb_cma_alloc_frozen_folio alloc_buddy_hugetlb_folio_with_mpol() can pass a NULL nodemask to alloc_fresh_hugetlb_folio() as a fallback to allocate from all nodes. If order is gigantic, alloc_fresh_hugetlb_folio() propagates the NULL nodemask down to hugetlb_cma_alloc_frozen_folio() via alloc_gigantic_frozen_folio(). Additionally, hugetlb_cma_alloc_frozen_folio() previously attempted allocation on hugetlb_cma[nid] without verifying if nid is included in the caller's nodemask. Adding a node_isset(nid, *nodemask) check ensures the initial preferred node allocation honors the memory policy / nodemask. However, hugetlb_cma_alloc_frozen_folio() dereferences the nodemask in node_isset(nid, *nodemask) and for_each_node_mask(node, *nodemask), leading to a null pointer dereference kernel panic when nodemask is NULL. Fix this by checking if nodemask is NULL in hugetlb_cma_alloc_frozen_folio() and defaulting it to cpuset_current_mems_allowed. Enclose the allocation attempts within the cpuset seqcount retry loop so that if the cpuset changes concurrently during allocation, the attempts are retried using the updated nodemask. This ensures that the initial node check and fallback loop safely honor the task's cpuset without violating cpuset constraints or causing NULL pointer dereferences or unexpected allocation failures. From a userspace perspective, this bug allows an unprivileged user to crash the kernel (trigger a panic) by requesting a gigantic hugepage allocation with MPOL_PREFERRED_MANY on a system where CMA is only configured on a subset of NUMA nodes. This can be reproduced by booting a VM with two NUMA nodes, restricting CMA to Node 1 (e.g., hugetlb_cma=1:1G default_hugepagesz=1G hugepagesz=1G hugepages=0), and running a program that allocates a 1GB hugepage area without reserving, restricts allocation to Node 0 using mbind() with MPOL_PREFERRED_MANY, and triggers a page fault: void *ptr = mmap(NULL, 1UL << 30, PROT_READ | PROT_WRITE, MAP_PRIVATE | MAP_ANONYMOUS | MAP_HUGETLB | MAP_HUGE_1GB | MAP_NORESERVE, -1, 0); unsigned long nodemask = 1; /* Node 0 */ mbind(ptr, 1UL << 30, MPOL_PREFERRED_MANY, &nodemask, sizeof(nodemask) * 8, 0); memset(ptr, 0, 1UL << 30); /* Trigger fault */ This results in a NULL pointer dereference: BUG: kernel NULL pointer dereference, address: 0000000000000000 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page Oops: Oops: 0000 [#1] SMP NOPTI RIP: 0010:hugetlb_cma_alloc_frozen_folio+0x75/0x120 Call Trace: <TASK> only_alloc_fresh_hugetlb_folio.isra.0+0x2c/0x160 alloc_surplus_hugetlb_folio+0x6d/0x100 alloc_hugetlb_folio+0x3c5/0x660 hugetlb_no_page+0x3d9/0x650 | ||||
| CVE-2026-89967 | 1 Linux | 1 Linux Kernel | 2026-09-18 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: mm/migrate_device: avoid out-of-bounds writes for compound folios migrate_device_range() and migrate_device_pfns() clear the entries following a compound folio so that the PFN arrays retain their page-granular representation. If a compound folio extends beyond the end of the caller-provided range, the loops clear all following folio entries without limiting them to the number of slots remaining in the npages-sized array, causing an out-of-bounds write. Do not proceed with a compound folio if its page-granular representation does not fit entirely in the remaining PFN array. If this happens, drop any reference and lock acquired for the folio, clear the remaining entries, and stop collecting. Observed with a KASAN x86 QEMU kernel using the HMM migrate_anon_huge_zero selftest. Closing /dev/hmm_dmirror0 after migrating an anonymous huge page to device memory exercises: dmirror_fops_release() -> dmirror_device_evict_chunk() -> migrate_device_range() | ||||
| CVE-2026-89974 | 1 Linux | 1 Linux Kernel | 2026-09-18 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: nvme-fc: fix double free of fabrics options when nvme_add_ctrl() fails nvmf_create_ctrl() owns the fabrics options and frees them whenever ->create_ctrl() returns an error, so a transport must not free them on its own error paths. nvme-fc tracks this by testing ctrl->ctrl.opts in nvme_fc_ctrl_free(), which requires nvme_fc_init_ctrl() to clear that pointer on every error exit. The coupling is implicit, and commit 1a9e218195a5 ("nvme: split device add from initialization") broke it by adding a second error exit. When nvme_add_ctrl() fails, nvme_fc_init_ctrl() jumps to out_put_ctrl:, past the "ctrl->ctrl.opts = NULL" that only sits on the fail_ctrl: path, so nvme_fc_ctrl_free() frees the options and nvmf_create_ctrl() frees them a second time: BUG: KASAN: slab-use-after-free in nvmf_free_options+0x30/0x190 nvmf_free_options+0x30/0x190 drivers/nvme/host/fabrics.c:1284 nvmf_create_ctrl drivers/nvme/host/fabrics.c:1374 [inline] Freed by task 5534: nvme_fc_ctrl_free drivers/nvme/host/fc.c:2374 [inline] nvme_fc_init_ctrl+0xe17/0x1450 drivers/nvme/host/fc.c:3605 nvme_add_ctrl() fails when dev_set_name() cannot allocate, so this is reachable under memory pressure or fault injection. Without KASAN the options are freed twice. Rather than clear the pointer on the second exit as well, derive ownership the way nvme-tcp, nvme-rdma and nvme-loop do, from list membership: their free_ctrl leaves the options alone unless the controller made it onto the transport list. The list cannot simply be populated on the success path as it is there. nvme-fc runs the initial connect synchronously via flush_delayed_work(), and the controller has to be reachable on rport->ctrl_list for the whole of it: nvme_fc_unregister_remoteport() needs to find it to signal connectivity loss, nvme_fc_match_disconn_ls() matches an incoming Disconnect Association LS against ctrl->association_id, which is only assigned during that window, nvme_fc_resume_controller() needs it on remoteport re-registration, and nvme_fc_existing_controller() uses it to reject a duplicate connect racing the one in flight. Keep the insertion where it is and add a fail_unlist: label, falling into fail_ctrl:, for the error paths that run after it. The earlier error paths never reach the insertion and keep using fail_ctrl: directly, so the list is only touched where the controller is actually on it. nvme_fc_ctrl_free() cannot use the plain "goto free_ctrl" the other transports use, because it still has to put_device(), release the rport reference and free the ida entry for resources taken before the insertion. Sample list_empty() under rport->lock instead. ctrl->ctrl.opts also stays valid for the whole teardown now. That is not the bug being fixed, but it removes some fragility around the old idiom: nvme_free_ctrl() calls nvme_auth_free() before ->free_ctrl(), and ctrl_max_dhchaps() dereferences ctrl->opts without a NULL check when ctrl->dhchap_ctxs is set, which nvme-fc permits since NVMF_ALLOWED_OPTS allows the dhchap options. The nvme sysfs attributes that dereference ctrl->opts, such as hostnqn and address, evaluate their is_visible() test once at device_add() time and stay readable until cdev_device_del(). | ||||
| CVE-2026-89976 | 1 Linux | 1 Linux Kernel | 2026-09-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: accel/ethosu: fix job completion fence cleanup ethosu_ioctl_submit_job() allocates done_fence before validating buffer handles. Errors after allocation call ethosu_job_err_cleanup(), which frees the job but leaks the uninitialized fence. A scheduler dependency error also lets ethosu_job_run() return before dma_fence_init(). Normal cleanup then passes a zeroed refcount to dma_fence_put(). Release done_fence in the common cleanup path and use dma_fence_was_initialized() to distinguish initialized fences from raw allocations. [robh: also fix goto] | ||||
| CVE-2026-89981 | 1 Linux | 1 Linux Kernel | 2026-09-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: arm64: Don't read GMID_EL1 when MTE is disabled __cpuinfo_store_cpu() gates the GMID_EL1 read on the raw ID_AA64PFR1_EL1, so it reads the register even when the kernel has disabled MTE (CONFIG_ARM64_MTE=n or arm64.nomte). KVM sets HCR_EL2.TID5 in that case, and pKVM injects an UNDEF the host cannot handle: Internal error: Oops - Undefined instruction: 0000000002000000 [#1] SMP pc : __cpuinfo_store_cpu+0xf4/0x264 Kernel panic - not syncing: Attempted to kill the idle task! Only pKVM reaches it, and only after a CPU is offlined and brought back online: its CPU_ON relay sets the host HCR before the CPU enters EL1, while plain nVHE sets it at CPUHP_AP_KVM_ONLINE. Gate the read on the CPU's own ID_AA64PFR1_EL1 with the command-line override applied, and on CONFIG_ARM64_MTE, which no register reflects. The boot CPU stores its registers before init_cpu_features() strips an unsafe override, so clamp against the hardware value here too. | ||||
| CVE-2026-89998 | 1 Linux | 1 Linux Kernel | 2026-09-18 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: dm: fix race when loading and unloading a table If the userspace calls two concurrent table load ioctls and one of them succeeds and the other fails, there is a race condition because dm_setup_md_queue walks &md->table_devices without any lock. If the walk races with dm_table_destroy -> free_devices -> dm_put_table_device, there is access to invalid memory. Fix this race by extending the lock over the list walk. | ||||
| CVE-2026-90049 | 1 Linux | 1 Linux Kernel | 2026-09-18 | 9.3 Critical |
| In the Linux kernel, the following vulnerability has been resolved: net: skbuff: don't skb_tx_error() the source skb in skb_zerocopy() skb_zerocopy() copies frags from @from into @to. On an skb_orphan_frags() failure it calls skb_tx_error(@from), a destructive operation on the source skb the copy helper does not own. That completes @from's zerocopy uarg and clears SKBFL_ALL_ZEROCOPY, including the SKBFL_SHARED_FRAG page-ownership marker. Both callers already report the failure on their own drop path. nfnetlink_queue does it at nla_put_failure, and Open vSwitch does it in the flow-miss drop arm of ovs_dp_process_packet(), so nothing is lost by dropping it here. On Open vSwitch's OVS_ACTION_ATTR_USERSPACE path the skb is not freed on this error: do_execute_actions() ignores output_userspace()'s return value and, unless the upcall was the last action, keeps forwarding the same skb through the flow's remaining actions. The uarg is completed while that skb is still in flight, telling the producer its buffers are free, and SKBFL_SHARED_FRAG is cleared on an skb the rest of the stack still handles. That flag is what makes esp_input() call skb_cow_data() instead of decrypting in place, so a later local ESP delivery can decrypt over frags the skb does not own privately. Leave error reporting to the callers. | ||||
| CVE-2026-81440 | 2026-09-18 | 7.3 High | ||
| Dell OpenManage Server Administrator, versions prior to 11.1.0.3, contains a Use of Hard-coded Credentials vulnerability. An unauthenticated attacker with remote access could potentially exploit this vulnerability, leading to Unauthorized access. | ||||
| CVE-2026-92770 | 2 Goharbor, Linuxfoundation | 2 Harbor, Harbor | 2026-09-18 | 6.5 Medium |
| Harbor through 2.15.2 fails to properly restrict the q query parameter filtering on scanner registration access credentials. Project administrators can exploit fuzzy filtering on the AccessCredential column to recover the scanner adapter secret one character at a time through response row counts. | ||||
| CVE-2026-92782 | 1 Chroma-core | 1 Chroma | 2026-09-18 | 8.1 High |
| Chroma through 1.5.9 fails to validate tenant and database segments when resolving collections, allowing authenticated attackers to access collections from other tenants by knowing the collection identifier. Attackers can read, modify, and update records in foreign collections by issuing requests under their own tenant path, bypassing authorization checks. | ||||
| CVE-2026-90997 | 1 Keycloak | 1 Keycloak | 2026-09-18 | 7.4 High |
| A flaw was found in Keycloak. When deployed in stateless mode with MySQL or MariaDB, a mismatch in row-count semantics between the database driver and Keycloak's application logic allows an attacker to bypass replay protection. This vulnerability enables an attacker who intercepts single-use security artifacts, such as JWT client assertions, DPoP proofs, or one-time password (TOTP) codes, to replay them. Successful exploitation grants unauthorized access to the token endpoint or login flow. | ||||
| CVE-2026-89058 | 2026-09-18 | 7.4 High | ||
| A flaw was found in RESTEasy's CorsFilter, which, when configured to allow all origins ("*"), reflects the request's Origin header back in the Access-Control-Allow-Origin response together with Access-Control-Allow-Credentials: true. This permissive cross-origin policy allows a malicious website to make credentialed cross-origin requests and read authenticated responses from a victim's session, resulting in a loss of confidentiality. | ||||
| CVE-2026-90000 | 1 Linux | 1 Linux Kernel | 2026-09-18 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: HID: rmi: fix OOB access with undersized RMI reports The hid-rmi driver sizes its writeReport/readReport buffer purely from the report descriptor supplied by the device, with no minimum bound: data->input_report_size = hid_report_len(input_report); data->output_report_size = hid_report_len(output_report); alloc_size = data->output_report_size + data->input_report_size; data->writeReport = devm_kzalloc(&hdev->dev, alloc_size, GFP_KERNEL); data->readReport = data->writeReport + data->output_report_size; but then reads and writes fixed offsets into it. A device declaring a 1-byte output and a 1-byte input report makes hid_report_len() return 2 for each, so alloc_size is 4, while rmi_set_page() -- reached unconditionally at probe time through rmi_input_configured() -- stores writeReport[4] and rmi_hid_read_block() stores writeReport[0..5]. Since readReport lives at writeReport + output_report_size, those stores also corrupt the window the next reply is parsed out of. The read path is worse: the copy length comes from readReport[1], which the device fills in and can be up to 255, and the copy starts at &readReport[2] with no regard for input_report_size, so it runs past the end of the allocation into adjacent slab objects. This does not even need a lying device -- rmi_f01_probe() issues a fixed 21-byte register read, so any device declaring an input report smaller than 23 bytes reads out of bounds even when it answers truthfully. Those bytes become the register values the RMI core acts on: rmi_f01_probe() prints them to the kernel log as the product id and exports them through the mode 0444 sysfs attribute of the same name, and rmi_driver_set_irq_bits() sends them back to the device as the interrupt mask, so an undersized report descriptor leaks heap contents both to unprivileged userspace and to the device itself. The write path has no bound either: rmi_hid_write_block() copies an unbounded len to &writeReport[4], and the largest caller a device can drive at probe time is rmi_driver_set_irq_bits(), whose length is derived from the interrupt source counts the device declares in its Page Description Table. Finally, the read loop cannot terminate on a zero-length reply: such a reply copies nothing and advances neither bytes_read nor bytes_needed, and because a reply did arrive the one second wait_event_timeout() does not fire either, so a device answering 0 forever keeps the loop running inside the probe worker with page_mutex held. khungtaskd does not notice, because every reply wakes the task. Reject reports too small for what the driver builds -- 6 output bytes for the write reports and 3 input bytes for the read handshake -- at probe time, clamp the write and the read copy to the report sizes the device declared, and treat a zero-length reply as an error. A device refused this way is started as an ordinary HID device, like one that does not carry the RMI report ids at all. RMI_DEVICE must not be left set in device_flags on that path, because rmi_input_configured() would then run the RMI setup and reach rmi_set_page(), which writes the writeReport buffer the refusal just skipped allocating. The bit can arrive set: rmi_probe() copies id->driver_data into device_flags before the report checks, and a bind through the new_id sysfs attribute can supply driver_data with RMI_DEVICE (BIT(0)) set. Strip the bit where driver_data is copied, so RMI_DEVICE keeps meaning exactly "this probe validated the reports"; the three jumps to start that predate this patch are covered as well. The error path also clears RMI_READ_DATA_PENDING on its way out, because that flag is what the wait at the top of the loop tests: leaving it set would make every later wait_event_timeout() return immediately on the stale reply and kill the read path for the rest of the device's life. Clamping does not regress working hardware: the read loop already handles ---truncated--- | ||||
| CVE-2026-90007 | 1 Linux | 1 Linux Kernel | 2026-09-18 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: scsi: pm8001: Use rollback index when freeing MSI-X vectors pm8001_request_msix() unwinds previously registered handlers with free_irq() when request_irq() fails. The rollback loop uses the failing index i for every iteration instead of the already registered vector index j. That passes the wrong IRQ/dev_id pair to free_irq() and leaves the earlier handlers installed. Use j for both pci_irq_vector() and the matching irq_vector entry in the rollback loop. | ||||
| CVE-2026-90008 | 1 Linux | 1 Linux Kernel | 2026-09-18 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: scsi: megaraid_sas: Limit NVMe request size to the PRP chain frame megasas_make_prp_nvme() builds a command's PRP list in cmd->sg_frame, a DMA pool buffer of instance->max_chain_frame_sz bytes, spending one entry per NVMe page of the transfer plus one per page of the buffer for the chain pointer. The loop runs until the transfer is described and never checks the buffer bound. max_hw_sectors comes straight from the MDTS the firmware reports for the drive. On drives with a large MDTS the only thing keeping the list inside the buffer was the block layer default of 1280 KiB, which needs 320 entries, which fit into a 4 KiB frame as that holds 512. But since commit 9b8b84879d4a ("block: Increase BLK_DEF_MAX_SECTORS_CAP") that default is 4 MiB, and such a transfer needs 1025 entries, so the list runs a full page past the end of the frame: sd 1:0:1:0: [sdb] tag#630 page boundary ptr_sgl: 0x00000000ba62d13f BUG: unable to handle page fault for address: ff663bcb81e7c000 #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page RIP: 0010:megasas_build_and_issue_cmd_fusion+0xeaa/0x1870 [megaraid_sas] If the page after the frame happens to be mapped, the overrun does not fault but silently corrupts the neighbouring pool entry, which is another in-flight command's PRP list. Cap max_hw_sectors at what the chain frame can describe, less one page for transfers that do not start on a page boundary and so need one entry more. This is the megaraid_sas counterpart of commit 04631f55afc5 ("scsi: mpt3sas: Limit NVMe request size to 2 MiB"), but derives the limit from max_chain_frame_sz rather than hardcoding it. | ||||
| CVE-2026-90010 | 1 Linux | 1 Linux Kernel | 2026-09-18 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: scsi: bsg: Cap io_uring sense copy to max_response_len Completion copied scmd->sense_len to the user response buffer without honoring max_response_len. After a valid sense, the midlayer sets sense_len to the real length (up to SCSI_SENSE_BUFFERSIZE), so a smaller user buffer was overrun. | ||||