Export limit exceeded: 404304 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (404304 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-98275 | 1 Linux | 1 Linux Kernel | 2026-10-07 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: ethernet: cortina: Ack RX overrun interrupt correctly The RX overrun interrupt is reported in interrupt status register 4, but gmac_irq() acknowledges it using the RX descriptor error bit from status register 0. For GMAC0 this writes the GMAC1 overrun bit, while for GMAC1 the shift leaves no bit in the 32-bit register. Acknowledge the same per-port RX overrun bit that was detected. | ||||
| CVE-2026-98270 | 1 Linux | 1 Linux Kernel | 2026-10-07 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: check ras and obj before dereference nbio_v7_9_handle_ras_controller_intr_no_bifring() dereferences ras and obj without checking either for NULL. Both amdgpu_ras_get_context() and amdgpu_ras_find_obj() can return NULL, e.g. during the window between adev->nbio.ras being set (early in amdgpu_ras_init(), by design, to enable the fatal-error interrupt as soon as possible) and the PCIE_BIF ras object actually being created in RAS late_init. Any interrupt in that window crashes in hard-IRQ context. This is analogous to commit d190b459b2a4 ("drm/amdgpu: the warning dereferencing obj for nbio_v7_4"), which fixed the same issue in the nbio_v7_4 handler. Found by Linux Verification Center (linuxtesting.org) with SVACE. (cherry picked from commit c7071767a50a32ed727cf800ac84372429e3b4b3) | ||||
| CVE-2026-98301 | 1 Linux | 1 Linux Kernel | 2026-10-07 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: bridge: mst: move switchdev call outside rcu This is a follow-up of one of sashiko's pre-existing bug reports. br_mst_set_state() calls switchdev_port_attr_set() for nonzero MSTIs while holding rcu_read_lock() which invokes the blocking switchdev notifier chain and may sleep. Nonzero MSTI changes come from netlink with rtnl held. Move the switchdev call before entering the rcu section and assert that rtnl is held. The call cannot be deferred because netlink needs its error and extack. Also DSA reads the old bridge MST state during the callback and checks it. A deferred callback will be late and will see the updated state. | ||||
| CVE-2026-106500 | 1 Backstage | 2 Backstage, Plugin-scaffolder-backend | 2026-10-07 | 8.5 High |
| Backstage is an open framework for building developer portals. Prior to 3.3.1, 3.4.1, 4.0.3 and 4.1.0, the @backstage/plugin-scaffolder-backend package is affected by improper task state validation in scaffolder backend. An authenticated user with permission to create and access Scaffolder tasks may, under specific timing and deployment conditions, affect files accessible to the Backstage backend. If backend application files are writable, the confidentiality, integrity, and availability of the backend may be compromised. This issue is fixed in versions 3.3.1, 3.4.1, 4.0.3 and 4.1.0. | ||||
| CVE-2026-106357 | 1 Google | 1 Chrome | 2026-10-07 | 8.8 High |
| Use after free in WebRTC in Google Chrome prior to 155.0.8059.39 allowed a remote attacker to execute arbitrary code inside the sandbox via a crafted HTML page. (Chromium security severity: High) | ||||
| CVE-2026-106346 | 1 Google | 1 Chrome | 2026-10-07 | 8.8 High |
| Improper state validation in DevTools in Google Chrome prior to 155.0.8059.39 allowed a remote attacker to potentially execute arbitrary code inside the sandbox via a crafted HTML page. (Chromium security severity: High) | ||||
| CVE-2026-98249 | 1 Linux | 1 Linux Kernel | 2026-10-07 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: arm64: hibernate: pass HVC_SET_VECTORS args to the resume hvc swsusp_arch_suspend_exit() reinstalls the restored kernel's hyp stub vectors with an hvc, but never passes the arguments. x0 is not set to HVC_SET_VECTORS and x1 is not set to the vector address, so the stub dispatch falls through and returns without writing vbar_el2. EL2 is left pointing at the trans_pgd copy of the vectors, a page that swsusp_free() releases right after resume. Set the arguments up the same way __hyp_set_vectors() does. Without this fix, Vladimir was able to trigger a hang when resuming from hibernation with CONFIG_PAGE_POISONING=y and page_poison=on. | ||||
| CVE-2026-98295 | 1 Linux | 1 Linux Kernel | 2026-10-07 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: coredump: Quiesce dump work on unregister hci_devcd_handle_pkt_init() arms dump_timeout and coredump producers queue dump_rx without holding an hdev reference. Unregister leaves both works live, so disconnecting during an active dump lets them access hdev after hci_release_dev() frees it. Shut down coredump processing during unregister. Close the producer gate under dump_q.lock before disabling both works, then free the active buffer and queued packets under hci_dev_lock. Serializing the gate with enqueue prevents controller-specific workers from adding packets after the final purge. | ||||
| CVE-2026-98297 | 1 Linux | 1 Linux Kernel | 2026-10-07 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_core: Fix queuing tx_work after workqueue is drained hci_send_acl(), hci_send_sco() and hci_send_iso() queue hdev->tx_work unconditionally. They can run from the L2CAP/SCO/ISO socket send path while hci_dev_close_sync() is draining hdev->workqueue (HCIDEVDOWN racing with a socket write). Since that queue_work() is not chained work from the tx_work worker itself, __queue_work() sees the queue marked __WQ_DRAINING, warns "cannot queue %ps on wq %s", and drops the work: WARNING: CPU: 1 PID: 5985 at kernel/workqueue.c:2352 __queue_work Call Trace: queue_work_on l2cap_chan_send l2cap_sock_sendmsg ... hci_dev_close_sync() already sets HCI_CMD_DRAIN_WORKQUEUE before draining, but only hci_cmd_work() and handle_cmd_cnt_and_timer() check it before queuing. Route the tx_work producers through the same guard via a shared hci_sched_tx() helper. | ||||
| CVE-2026-98334 | 1 Linux | 1 Linux Kernel | 2026-10-07 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: reset state when starting AP fails ieee80211_start_ap() can set enable_beacon (and beacon_int) and fail later, leaving it set forever. Scanning can then attempt to restore beaconing on such an interface, leading to: Oops: divide error: 0000 [#1] SMP KASAN NOPTI RIP: 0010:mac80211_hwsim_link_info_changed+0xca7/0xf00 Call Trace: drv_link_info_changed+0x413/0x860 net/mac80211/driver-ops.c:495 ieee80211_link_info_change_notify+0x24b/0x3c0 net/mac80211/main.c:427 ieee80211_offchannel_return+0x381/0x580 net/mac80211/offchannel.c:160 __ieee80211_scan_completed+0x993/0xe30 net/mac80211/scan.c:519 ieee80211_scan_work+0x472/0x2010 net/mac80211/scan.c:1193 cfg80211_wiphy_work+0x2b7/0x550 net/wireless/core.c:538 in hwsim. Also, cfg80211 then allows changing the interface type, and the off-channel path getgs confused about beaconing as well, leading to another warning: WARNING: net/mac80211/driver-ops.c:468 at drv_link_info_changed+0x583/0x880 ieee80211_link_info_change_notify+0x24b/0x3c0 net/mac80211/main.c:427 ieee80211_offchannel_stop_vifs+0x328/0x5c0 net/mac80211/offchannel.c:122 ieee80211_start_sw_scan net/mac80211/scan.c:583 [inline] __ieee80211_start_scan+0xfb6/0x1af0 net/mac80211/scan.c:882 Reset the state on failures to always have it correct. | ||||
| CVE-2026-106342 | 1 Google | 1 Chrome | 2026-10-07 | 8.8 High |
| Information leak in Autofill in Google Chrome prior to 155.0.8059.39 allowed a remote attacker to obtain sensitive information via a crafted HTML page. (Chromium security severity: Medium) | ||||
| CVE-2026-98271 | 1 Linux | 1 Linux Kernel | 2026-10-07 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: net: skbuff: do not leave stale header offsets after pskb_carve() pskb_carve_inside_header() and pskb_carve_inside_nonlinear() remove the first bytes of a packet and reallocate skb->head. All the headers that were present before the operation are gone, but both functions call skb_headers_offset_update(skb, 0), which is a no-op : skb->mac_header, skb->network_header, skb->transport_header and skb->csum_start keep their old values and now describe bytes which are no longer there. Both helpers size the new head from the old skb_end_offset(), so the stale offsets still land inside the new allocation. They point past skb_tail_pointer() though, to bytes that were never initialized. pskb_carve_inside_nonlinear() is the worst case, because it leaves a zombie skb with an empty linear part (skb->data == skb_tail_pointer(skb), skb_headlen(skb) == 0), while skb_mac_header_was_set() is still true and skb->mac_header is way ahead of skb->data. The only user of pskb_extract() is rds_tcp_data_recv(), and the carved skb is queued on tinc->ti_skb_list. When the RDS incoming message is released, rds_tcp_inc_free() calls skb_queue_purge(), which frees the skbs with SKB_DROP_REASON_QUEUE_PURGE. This is visible from drop_monitor, which then tries to pull back to the (bogus) mac header : skbuff: __skb_pull(len=234) skb len=6968 data_len=6968 headroom=0 headlen=0 tailroom=0 end-tail=384 mac=(234,14) mac_len=14 net=(248,40) trans=288 shinfo(txflags=0 nr_frags=1 gso(size=1428 type=16 segs=5)) csum(0x100120 start=288 offset=16 ip_summed=3 complete_sw=0 valid=1 level=0) hash(0x7b446c6c sw=0 l4=1) proto=0x86dd pkttype=0 iif=60 kernel BUG at ./include/linux/skbuff.h:2847! Add skb_carve_reset_headers() to mark the mac and transport headers as not set, reset the network header, clear skb->mac_len, and drop a now meaningless CHECKSUM_PARTIAL (csum_start no longer describes anything). Invalidate the inner offsets as well. Unlike mac_header and transport_header they have no "unset" sentinel, so a leftover non-zero value still looks like a real header. Zero skb->inner_mac_header, skb->inner_network_header, skb->inner_transport_header, skb->inner_protocol and skb->encapsulation, so that all the header state is invalidated in one place. v2: fixed an inaccurate changelog. The stale offsets stay inside the new skb->head, which is never smaller than the old one, they simply point past skb_tail_pointer() to bytes that are gone. Thanks to Xuanqiang Luo for insisting on this. Also invalidate the inner header state, as suggested by the netdev AI review : https://netdev-ai.bots.linux.dev/sashiko/#/patchset/20260911114922.621937-1-edumazet%40google.com | ||||
| CVE-2026-98289 | 1 Linux | 1 Linux Kernel | 2026-10-07 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: af_unix: Unify scc_index when finalising SCC in __unix_walk_scc(). Commit bfdb01283ee8 ("af_unix: Assign a unique index to SCC.") changed Tarjan's algorithm to update lowlink with lowlink, which is called lowpoint (unix_vertex.scc_index). unix_vertex_dead() assumes all vertices in an SCC share the same lowpoint, but this is not always true if an SCC has two or more back edges, depending on the order of DFS. For example, the graph below has two back edges from B to A and from C to B. A --> B --> C ^ | ^ | `----' `----' If DFS walks through A -> B -> C -> B (-> C -> B) -> A (-> B -> A), each index and scc_index will be updated as follows. A --> B --> C C = (3, 3) (index, scc_index) B = (2, 2) A = (1, 1) A ... B ... C C = (3, 2)<-. ^ | B = (2, 2) -' `----' A = (1, 1) A ... B ... C C = (3, 2) ^ | . . B = (2, 1)<-. `----' .... A = (1, 1) -' Then, unix_vertex_dead() thinks that B is passed to another SCC with scc_index 2, and the SCC is not garbage-collected. This does not happen if DFS walks in a different order below or starts from B. 1 3 A --> B --> C ^ | ^ | `----' `----' 2 4 Let's unify scc_index across the SCC when finalising it. Note that updating v->index was previously done in unix_scc_dead(), when called from __unix_walk_scc(), just to save one loop. Since __unix_walk_scc() now iterates over the SCC anyway, the update is moved back to __unix_walk_scc() and 'fast' argument is dropped. | ||||
| CVE-2026-98292 | 1 Linux | 1 Linux Kernel | 2026-10-07 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btmtksdio, btmtkuart: validate WMT event length before struct access btmtksdio.c and btmtkuart.c cast a received WMT event straight to struct btmtk_hci_wmt_evt and read its op/flag fields without checking the event is long enough to contain them, unlike btmtk.c. The FUNC_CTRL case then further casts to struct btmtk_hci_wmt_evt_funcc and reads its 2-byte status field, again without a length check. Firmware that sends a short or malformed WMT event makes both drivers read past the end of the received SKB. Mirror btmtk.c: validate the base WMT header with skb_pull_data() before touching any of its fields, and when a FUNC_CTRL event turns out to be the short, header-only form (a plain enable/disable ack with no status word), decode the result from the header's own flag byte instead (0 = success, otherwise failure). Verified setup on MT7920, MT7921, MT7922 and MT7925: no regression. | ||||
| CVE-2026-98293 | 1 Linux | 1 Linux Kernel | 2026-10-07 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: ISO: Fix parent socket leak in iso_conn_ready() iso_get_sock() returns the parent socket with a reference held, which is dropped by sock_put() once the child socket has been set up. The error path taken when iso_sock_alloc() fails only calls release_sock() and returns, leaking the reference and thus the parent socket itself. Drop the reference on that path as well. | ||||
| CVE-2026-98355 | 1 Linux | 1 Linux Kernel | 2026-10-07 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/rtrs: guard against null kobj name In the client, if `init_path()` errors, the callee tries to clean up with `rtrs_clt_close_conns()`. However, this can lead to calling the event tracing code with `clt_path->kobj->name` being `NULL` and thus causing a null pointer dereference when trying to copy from it. This just adds a guard to check that the name is not `NULL` before copying from it. The server appears to have a similar pattern. | ||||
| CVE-2026-105485 | 1 Devolutions | 1 Server | 2026-10-07 | 6.8 Medium |
| Authentication bypass OAuth device authorization flow in Devolutions Server 2026.3.7.0 and earlier allows a remote attacker to take over a user's account via replay of a captured device verification link by an authenticated victim. | ||||
| CVE-2026-98296 | 1 Linux | 1 Linux Kernel | 2026-10-07 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btintel_pcie: validate TX skb length in send_sync btintel_pcie_prepare_tx() copies skb->len bytes into a fixed BTINTEL_PCIE_BUFFER_SIZE (4096) DMA slot via an unchecked memcpy. Oversized packets are currently rejected only in btintel_pcie_send_frame(); any future caller of btintel_pcie_send_sync() would silently overflow the DMA buffer. Add the bounds check in btintel_pcie_send_sync() itself, right before skb_push() and the DMA copy. | ||||
| CVE-2026-98302 | 1 Linux | 1 Linux Kernel | 2026-10-07 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: fddi: skfp: fix NULL deref when setting the MAC address while down skfp_ctl_set_mac_address() calls ResetAdapter() unconditionally, without checking netif_running(). ResetAdapter() first calls card_stop(), which sets smc->hw.hw_state to STOPPED, and then mac_drv_clear_tx_queue(), which walks the two transmit queues: for (i = QUEUE_S; i <= QUEUE_A0; i++) { queue = smc->hw.fp.tx[i] ; ... t = queue->tx_curr_get ; smc->hw.fp.tx[] is only populated by init_tx(), which is reached from skfp_open() through init_smt() -> init_fddi_driver() -> init_fplus() -> init_mac() -> init_tx(). The private area is allocated and zeroed by alloc_fddidev(), so on an interface that has never been brought up both queue pointers are still NULL. The hw_state test at the top of mac_drv_clear_tx_queue() does not catch this, because card_stop() has just set STOPPED; the function proceeds into the loop and dereferences NULL. ResetAdapter() does call init_smt() itself, but only after the queues have been cleared. Setting the MAC address on a down interface therefore oopses: ip link set dev fddi0 address 02:00:00:00:00:01 BUG: KASAN: null-ptr-deref in mac_drv_clear_tx_queue+0x68/0x2c0 [skfp] Read of size 8 at addr 0000000000000010 by task ip/302 Call Trace: <TASK> mac_drv_clear_tx_queue+0x68/0x2c0 [skfp 6c01d4bab63c36978bd0a7d7e90837adb44cc37b] ResetAdapter+0x29/0x100 [skfp 6c01d4bab63c36978bd0a7d7e90837adb44cc37b] skfp_ctl_set_mac_address+0x57/0x80 [skfp 6c01d4bab63c36978bd0a7d7e90837adb44cc37b] netif_set_mac_address+0x1e4/0x2c0 do_setlink+0x684/0x2680 </TASK> Address 0x10 is the offset of tx_curr_get, the third pointer in struct s_smt_tx_queue, on 64-bit. mac_drv_clear_rx_queue(), which ResetAdapter() calls immediately afterwards, dereferences smc->hw.fp.rx[QUEUE_R1] in the same way behind the same ineffective hw_state test; the transmit queue merely crashes first. Both are covered by the guard below. Skip the adapter reset when the interface is down. dev_addr_set() is left unconditional, so the new address is still recorded in dev->dev_addr. Nothing is lost by not resetting the adapter here: skfp_open() deliberately re-reads the factory address on every open, read_address(smc, NULL); eth_hw_addr_set(dev, smc->hw.fddi_canon_addr.a); and the comment above it states this is done to discard exactly such an address override across a close/open cycle. An address set while the interface is down could not have survived the following open even before this change, so the guard removes no working behaviour. Guarding the hardware side of ndo_set_mac_address() with netif_running() is established practice; skge_set_mac_address() has done so since commit 2eb3e621c4e0 ("skge: set mac address bonding fix"). Guarding the reset as a whole, rather than NULL-checking the queues, is also what the rest of the driver expects. After a previous open/close the queue pointers are stale but non-NULL, so there is no crash, yet ResetAdapter() goes on to call smt_online() and STI_FBI() ("Enable Board Interrupts") while skfp_close() has already called free_irq() - the adapter would be brought back online with no handler installed. The only other ResetAdapter() caller is skfp_interrupt(), which by construction runs only while the device is open. Found by automated driver testing against an emulated SysKonnect FDDI adapter under a KASAN-enabled 7.0.0 kernel. Triggering it requires CAP_NET_ADMIN. | ||||
| CVE-2026-98314 | 1 Linux | 1 Linux Kernel | 2026-10-07 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: pcm: set timer->private_data before registering the PCM timer snd_pcm_timer_init() calls snd_device_register() to link the new struct snd_timer into the global timer list while it still carries hw.c_resolution = snd_pcm_timer_resolution (and hw.start/hw.stop), and only afterwards sets timer->private_data = substream. Once the timer is on the list under register_mutex, a concurrent reader can already reach it through the same mutex and invoke these callbacks. /proc/asound/timers does this via c_resolution(), and snd_timer_open()+snd_timer_start() reach start()/stop() the same way. All three dereference timer->private_data, which for this brief window is NULL, giving a NULL-pointer dereference: substream = timer->private_data; return substream->runtime ? ... // substream is NULL Move the private_data/private_free assignment before snd_device_register() so the timer is never visible on the list without its private_data set. On the snd_device_register() failure path, private_free() (snd_pcm_timer_free()) can now run, but it only does substream->timer = NULL, which is already NULL at that point since substream->timer is set to the new timer just once, after a successful registration -- so the failure path stays safe. | ||||