Export limit exceeded: 18255 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.

Export limit exceeded: 47137 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.

Search

Search Results (47137 CVEs found)

CVE Vendors Products Updated CVSS v3.1
CVE-2026-89467 1 Linux 1 Linux Kernel 2026-10-21 4.1 Medium
In the Linux kernel, the following vulnerability has been resolved: power: supply: qcom_battmgr: fix use-after-free qcom_battmgr_pdr_notify() queues enable_work when the PMIC GLINK service comes up, and the worker recovers battmgr through container_of() to issue firmware requests. The PMIC GLINK client stays on the client list until its devres release action runs, so a PDR notification can keep queueing the work, and a pending or running worker can access battmgr after devres frees it. Make enable_work device-managed with devm_work_autocancel(), registered before the PMIC GLINK client is allocated. The devres cleanup then releases the client first, so no further notification can queue the work, and cancels the work before battmgr is freed. This issue was found by an in-house static analysis tool.
CVE-2026-43294 1 Linux 1 Linux Kernel 2026-10-21 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: drm: renesas: rz-du: mipi_dsi: fix kernel panic when rebooting for some panels Since commit 56de5e305d4b ("clk: renesas: r9a07g044: Add MSTOP for RZ/G2L") we may get the following kernel panic, for some panels, when rebooting: systemd-shutdown[1]: Rebooting. Call trace: ... do_serror+0x28/0x68 el1h_64_error_handler+0x34/0x50 el1h_64_error+0x6c/0x70 rzg2l_mipi_dsi_host_transfer+0x114/0x458 (P) mipi_dsi_device_transfer+0x44/0x58 mipi_dsi_dcs_set_display_off_multi+0x9c/0xc4 ili9881c_unprepare+0x38/0x88 drm_panel_unprepare+0xbc/0x108 This happens for panels that need to send MIPI-DSI commands in their unprepare() callback. Since the MIPI-DSI interface is stopped at that point, rzg2l_mipi_dsi_host_transfer() triggers the kernel panic. Fix by moving rzg2l_mipi_dsi_stop() to new callback function rzg2l_mipi_dsi_atomic_post_disable(). With this change we now have the correct power-down/stop sequence: systemd-shutdown[1]: Rebooting. rzg2l-mipi-dsi 10850000.dsi: rzg2l_mipi_dsi_atomic_disable(): entry ili9881c-dsi 10850000.dsi.0: ili9881c_unprepare(): entry rzg2l-mipi-dsi 10850000.dsi: rzg2l_mipi_dsi_atomic_post_disable(): entry reboot: Restarting system
CVE-2026-43272 1 Linux 1 Linux Kernel 2026-10-21 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: ring-buffer: Fix possible dereference of uninitialized pointer There is a pointer head_page in rb_meta_validate_events() which is not initialized at the beginning of a function. This pointer can be dereferenced if there is a failure during reader page validation. In this case the control is passed to "invalid" label where the pointer is dereferenced in a loop. To fix the issue initialize orig_head and head_page before calling rb_validate_buffer. Found by Linux Verification Center (linuxtesting.org) with SVACE.
CVE-2026-43127 1 Linux 1 Linux Kernel 2026-10-21 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: ntfs3: fix circular locking dependency in run_unpack_ex Syzbot reported a circular locking dependency between wnd->rw_lock (sbi->used.bitmap) and ni->file.run_lock. The deadlock scenario: 1. ntfs_extend_mft() takes ni->file.run_lock then wnd->rw_lock. 2. run_unpack_ex() takes wnd->rw_lock then tries to acquire ni->file.run_lock inside ntfs_refresh_zone(). This creates an AB-BA deadlock. Fix this by using down_read_trylock() instead of down_read() when acquiring run_lock in run_unpack_ex(). If the lock is contended, skip ntfs_refresh_zone() - the MFT zone will be refreshed on the next MFT operation. This breaks the circular dependency since we never block waiting for run_lock while holding wnd->rw_lock.
CVE-2026-31562 1 Linux 1 Linux Kernel 2026-10-21 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: drm/mediatek: dsi: Store driver data before invoking mipi_dsi_host_register The call to mipi_dsi_host_register triggers a callback to mtk_dsi_bind, which uses dev_get_drvdata to retrieve the mtk_dsi struct, so this structure needs to be stored inside the driver data before invoking it. As drvdata is currently uninitialized it leads to a crash when registering the DSI DRM encoder right after acquiring the mode_config.idr_mutex, blocking all subsequent DRM operations. Fixes the following crash during mediatek-drm probe (tested on Xiaomi Smart Clock x04g): Unable to handle kernel NULL pointer dereference at virtual address 0000000000000040 [...] Modules linked in: mediatek_drm(+) drm_display_helper cec drm_client_lib drm_dma_helper drm_kms_helper panel_simple [...] Call trace: drm_mode_object_add+0x58/0x98 (P) __drm_encoder_init+0x48/0x140 drm_encoder_init+0x6c/0xa0 drm_simple_encoder_init+0x20/0x34 [drm_kms_helper] mtk_dsi_bind+0x34/0x13c [mediatek_drm] component_bind_all+0x120/0x280 mtk_drm_bind+0x284/0x67c [mediatek_drm] try_to_bring_up_aggregate_device+0x23c/0x320 __component_add+0xa4/0x198 component_add+0x14/0x20 mtk_dsi_host_attach+0x78/0x100 [mediatek_drm] mipi_dsi_attach+0x2c/0x50 panel_simple_dsi_probe+0x4c/0x9c [panel_simple] mipi_dsi_drv_probe+0x1c/0x28 really_probe+0xc0/0x3dc __driver_probe_device+0x80/0x160 driver_probe_device+0x40/0x120 __device_attach_driver+0xbc/0x17c bus_for_each_drv+0x88/0xf0 __device_attach+0x9c/0x1cc device_initial_probe+0x54/0x60 bus_probe_device+0x34/0xa0 device_add+0x5b0/0x800 mipi_dsi_device_register_full+0xdc/0x16c mipi_dsi_host_register+0xc4/0x17c mtk_dsi_probe+0x10c/0x260 [mediatek_drm] platform_probe+0x5c/0xa4 really_probe+0xc0/0x3dc __driver_probe_device+0x80/0x160 driver_probe_device+0x40/0x120 __driver_attach+0xc8/0x1f8 bus_for_each_dev+0x7c/0xe0 driver_attach+0x24/0x30 bus_add_driver+0x11c/0x240 driver_register+0x68/0x130 __platform_register_drivers+0x64/0x160 mtk_drm_init+0x24/0x1000 [mediatek_drm] do_one_initcall+0x60/0x1d0 do_init_module+0x54/0x240 load_module+0x1838/0x1dc0 init_module_from_file+0xd8/0xf0 __arm64_sys_finit_module+0x1b4/0x428 invoke_syscall.constprop.0+0x48/0xc8 do_el0_svc+0x3c/0xb8 el0_svc+0x34/0xe8 el0t_64_sync_handler+0xa0/0xe4 el0t_64_sync+0x198/0x19c Code: 52800022 941004ab 2a0003f3 37f80040 (29005a80)
CVE-2026-23459 1 Linux 1 Linux Kernel 2026-10-21 8.2 High
In the Linux kernel, the following vulnerability has been resolved: ip_tunnel: adapt iptunnel_xmit_stats() to NETDEV_PCPU_STAT_DSTATS Blamed commits forgot that vxlan/geneve use udp_tunnel[6]_xmit_skb() which call iptunnel_xmit_stats(). iptunnel_xmit_stats() was assuming tunnels were only using NETDEV_PCPU_STAT_TSTATS. @syncp offset in pcpu_sw_netstats and pcpu_dstats is different. 32bit kernels would either have corruptions or freezes if the syncp sequence was overwritten. This patch also moves pcpu_stat_type closer to dev->{t,d}stats to avoid a potential cache line miss since iptunnel_xmit_stats() needs to read it.
CVE-2025-71306 1 Linux 1 Linux Kernel 2026-10-21 7.1 High
In the Linux kernel, the following vulnerability has been resolved: ima: Fix stack-out-of-bounds in is_bprm_creds_for_exec() KASAN reported a stack-out-of-bounds access in ima_appraise_measurement from is_bprm_creds_for_exec: BUG: KASAN: stack-out-of-bounds in ima_appraise_measurement+0x12dc/0x16a0 Read of size 1 at addr ffffc9000160f940 by task sudo/550 The buggy address belongs to stack of task sudo/550 and is located at offset 24 in frame: ima_appraise_measurement+0x0/0x16a0 This frame has 2 objects: [48, 56) 'file' [80, 148) 'hash' This is caused by using container_of on the *file pointer. This offset calculation is what triggers the stack-out-of-bounds error. In order to fix this, pass in a bprm_is_check boolean which can be set depending on how process_measurement is called. If the caller has a linux_binprm pointer and the function is BPRM_CHECK we can determine is_check and set it then. Otherwise set it to false.
CVE-2026-105992 2026-10-21 5.3 Medium
The Ettrick Escape Room Booking WordPress plugin before 1.3.1 does not verify a booking's payment status against the payment provider before marking it paid and confirmed, allowing unauthenticated attackers to mark bookings as paid without paying.
CVE-2026-104682 1 Wordpress-extensions 1 Envira Gallery 2026-10-21 2.7 Low
The Envira Gallery WordPress plugin before 1.16.2 does not correctly check authorization on its gallery-conversion feature, verifying that the requester can edit an arbitrary post they name rather than that they are allowed to create the Envira Gallery WordPress plugin before 1.16.2's own gallery content, allowing users with contributor-level access to create and publish gallery posts that the Envira Gallery WordPress plugin before 1.16.2's settings otherwise withhold from them.
CVE-2026-105998 2026-10-21 5.3 Medium
The Booking Package WordPress plugin before 1.7.31 does not perform any authorization or validity check before resetting its premium subscription state, allowing unauthenticated attackers to disable the Booking Package WordPress plugin before 1.7.31's paid features.
CVE-2026-92998 2026-10-21 8.6 High
The Click n Chat (Chat Widget Integration) WordPress plugin before 1.1.3 does not sanitise sort parameters before using them in a SQL ORDER BY clause, allowing unauthenticated attackers to perform SQL injection attacks.
CVE-2026-92997 2026-10-21 8.6 High
The Click n Chat (Chat Widget Integration) WordPress plugin before 1.1.3 does not properly validate a parameter before using it as a column identifier in a SQL query, allowing unauthenticated attackers to perform SQL injection attacks.
CVE-2026-87838 2026-10-21 6.5 Medium
The Wava Payment Plugin WordPress plugin before 0.3.10 does not perform any authorisation, nonce or origin verification on one of its public REST endpoints, allowing unauthenticated attackers to overwrite the stored credential that identifies the merchant account the store's payments are created against, to force the integration into a verified state the site owner never completed, and to remove the payment method from the store's checkout.
CVE-2026-87837 2026-10-21 5.3 Medium
The Wava Payment Plugin WordPress plugin before 0.3.10 does not verify the authenticity of incoming payment-provider notifications, nor restrict who may send them, allowing unauthenticated attackers to change the status of any WooCommerce order in the store, including marking an unpaid order as paid and completed, and cancelling other customers' orders. In versions up to 0.3.7 the response additionally returns the affected order's billing details, disclosing customer names, addresses, email addresses and phone numbers to the same unauthenticated caller.
CVE-2026-112834 2 Castos, Wordpress-extensions 2 Seriously Simple Podcasting, Seriously Simple Podcasting 2026-10-21 5.3 Medium
Missing Authorization vulnerability in Castos Seriously Simple Podcasting seriously-simple-podcasting allows Exploiting Incorrectly Configured Access Control Security Levels.This issue affects Seriously Simple Podcasting: from n/a through 3.17.0.
CVE-2026-112829 2 Arraytics, Wordpress-extensions 2 Booktics, Booktics 2026-10-21 5.3 Medium
Missing Authorization vulnerability in Arraytics Booktics booktics allows Exploiting Incorrectly Configured Access Control Security Levels.This issue affects Booktics: from n/a through 1.0.30.
CVE-2026-112823 2 Wordpress-extensions, Wpusermanager 2 Wp User Manager, Wp User Manager 2026-10-21 4.3 Medium
Missing Authorization vulnerability in WP User Manager WP User Manager wp-user-manager allows Manipulating User State.This issue affects WP User Manager: from n/a through 2.9.25.
CVE-2026-111957 2026-10-21 5.3 Medium
The SUMIT Payment Gateway for WooCommerce WordPress plugin before 4.0.0 does not bind the payment it confirms with the provider to the order being completed, nor check the payment amount against the order total, allowing unauthenticated users to mark a pending order as paid by replaying a payment identifier obtained from any single genuine payment.
CVE-2026-110651 2026-10-21 6.8 Medium
The Swift Performance Lite WordPress plugin before 2.3.7.4 does not properly sanitize and escape a value before using it in a SQL statement, which could allow users with the author role and above to perform SQL injection attacks.
CVE-2026-107788 2026-10-21 4.3 Medium
The SmartyParcel WordPress plugin before 1.23.4 does not perform authorisation checks when deleting shipping label records, allowing any authenticated user such as a subscriber to delete the shipping label and tracking records of arbitrary orders store-wide.