Export limit exceeded: 421401 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 94649 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (94649 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-80693 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 9.3 Critical |
| In the Linux kernel, the following vulnerability has been resolved: idpf: bound interrupt-vector register fill to the allocated array idpf_get_reg_intr_vecs() fills the caller-allocated reg_vals[] array from the VIRTCHNL2_OP_ALLOC_VECTORS reply in adapter->req_vec_chunks, bounding its inner loop only by the per-chunk num_vectors. The array is sized separately: idpf_intr_reg_init() allocates kzalloc_objs(struct idpf_vec_regs, total_vecs) from caps.num_allocated_vectors and only checks the returned count after the fill. The sum of per-chunk num_vectors is never reconciled against total_vecs, so a reply with a small num_allocated_vectors but chunks summing higher writes past the end of reg_vals[]. Impact: a control plane (a PF or hypervisor device model) that returns a VIRTCHNL2_OP_ALLOC_VECTORS reply whose per-chunk num_vectors sum exceeds num_allocated_vectors writes struct idpf_vec_regs entries past the end of the reg_vals kmalloc allocation (KASAN slab-out-of-bounds write). Bound the fill loop to the array capacity passed in by the callers, mirroring the sibling idpf_vport_get_q_reg(). The existing num_regs < num_vecs check then rejects an undersized reply without the out-of-bounds write happening first. | ||||
| CVE-2026-31746 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: s390/zcrypt: Fix memory leak with CCA cards used as accelerator Tests showed that there is a memory leak if CCA cards are used as accelerator for clear key RSA requests (ME and CRT). With the last rework for the memory allocation the AP messages are allocated by ap_init_apmsg() but for some reason on two places (ME and CRT) the older allocation was still in place. So the first allocation simple was never freed. | ||||
| CVE-2026-31645 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: lan966x: fix page pool leak in error paths lan966x_fdma_rx_alloc() creates a page pool but does not destroy it if the subsequent fdma_alloc_coherent() call fails, leaking the pool. Similarly, lan966x_fdma_init() frees the coherent DMA memory when lan966x_fdma_tx_alloc() fails but does not destroy the page pool that was successfully created by lan966x_fdma_rx_alloc(), leaking it. Add the missing page_pool_destroy() calls in both error paths. | ||||
| CVE-2025-71272 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: most: core: fix resource leak in most_register_interface error paths The function most_register_interface() did not correctly release resources if it failed early (before registering the device). In these cases, it returned an error code immediately, leaking the memory allocated for the interface. Fix this by initializing the device early via device_initialize() and calling put_device() on all error paths. The most_register_interface() is expected to call put_device() on error which frees the resources allocated in the caller. The put_device() either calls release_mdev() or dim2_release(), depending on the caller. Switch to using device_add() instead of device_register() to handle the split initialization. | ||||
| CVE-2025-39862 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7915: fix list corruption after hardware restart Since stations are recreated from scratch, all lists that wcids are added to must be cleared before calling ieee80211_restart_hw. Set wcid->sta = 0 for each wcid entry in order to ensure that they are not added again before they are ready. | ||||
| CVE-2025-37746 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: perf/dwc_pcie: fix duplicate pci_dev devices During platform_device_register, wrongly using struct device pci_dev as platform_data caused a kmemdup copy of pci_dev. Worse still, accessing the duplicated device leads to list corruption as its mutex content (e.g., list, magic) remains the same as the original. | ||||
| CVE-2025-21650 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: net: hns3: fixed hclge_fetch_pf_reg accesses bar space out of bounds issue The TQP BAR space is divided into two segments. TQPs 0-1023 and TQPs 1024-1279 are in different BAR space addresses. However, hclge_fetch_pf_reg does not distinguish the tqp space information when reading the tqp space information. When the number of TQPs is greater than 1024, access bar space overwriting occurs. The problem of different segments has been considered during the initialization of tqp.io_base. Therefore, tqp.io_base is directly used when the queue is read in hclge_fetch_pf_reg. The error message: Unable to handle kernel paging request at virtual address ffff800037200000 pc : hclge_fetch_pf_reg+0x138/0x250 [hclge] lr : hclge_get_regs+0x84/0x1d0 [hclge] Call trace: hclge_fetch_pf_reg+0x138/0x250 [hclge] hclge_get_regs+0x84/0x1d0 [hclge] hns3_get_regs+0x2c/0x50 [hns3] ethtool_get_regs+0xf4/0x270 dev_ethtool+0x674/0x8a0 dev_ioctl+0x270/0x36c sock_do_ioctl+0x110/0x2a0 sock_ioctl+0x2ac/0x530 __arm64_sys_ioctl+0xa8/0x100 invoke_syscall+0x4c/0x124 el0_svc_common.constprop.0+0x140/0x15c do_el0_svc+0x30/0xd0 el0_svc+0x1c/0x2c el0_sync_handler+0xb0/0xb4 el0_sync+0x168/0x180 | ||||
| CVE-2024-42162 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: gve: Account for stopped queues when reading NIC stats We now account for the fact that the NIC might send us stats for a subset of queues. Without this change, gve_get_ethtool_stats might make an invalid access on the priv->stats_report->stats array. | ||||
| CVE-2026-88784 | 2026-10-21 | 7.5 High | ||
| The Translate WordPress with Weglot 2.0 WordPress plugin before 6.4.3 does not escape the URLs it re-inserts into a page when rewriting links for a translated language, and reverses the encoding that was applied to them beforehand, allowing unauthenticated users to store a payload which executes in the browser of anyone viewing the page in a translated language. | ||||
| CVE-2026-85683 | 2026-10-21 | 8.8 High | ||
| The Jane Menu WordPress plugin before 1.5.1 does not have any capability or nonce checks on one of its form handlers, which is reachable by unauthenticated users, allowing them to bind any published page to a remote document of their choosing. The plugin then fetches that document and outputs its head and body into the page without escaping, so an unauthenticated attacker can run arbitrary JavaScript in the browser of any visitor to that page, including an administrator. | ||||
| CVE-2026-81813 | 2026-10-21 | 6.8 Medium | ||
| The Elementor Website Builder WordPress plugin before 4.3.5 does not sanitize the text content of SVG files, checking only their elements and attributes, allowing users with the Contributor role and above to store a payload which breaks out when the SVG is rendered inline in a page and executes in the browser of any user viewing it. Execution is specific to Chromium-based browsers; Firefox is not affected. | ||||
| CVE-2026-81812 | 2026-10-21 | 6.4 Medium | ||
| The Elementor Website Builder WordPress plugin before 4.3.5 does not sanitize uploaded SVG files on every upload route, allowing users with the Author role and above to upload a file containing JavaScript, which will run in the browser of any user who opens it. Exploitation requires unfiltered file uploads to be enabled in the Elementor Website Builder WordPress plugin before 4.3.5 settings, which is not the default. | ||||
| CVE-2026-79627 | 2026-10-21 | 7.1 High | ||
| The Advanced File Manager WordPress plugin before 6.0.0 does not correctly determine whether a stored file is an SVG before sanitising it, allowing users granted file-manager access by an administrator to store a file containing script that is not stripped and that runs in the browser of anyone who opens it, including an administrator. | ||||
| CVE-2026-112840 | 2 Brainstormforce, Wordpress-extensions | 2 Surecart, Surecart | 2026-10-21 | 6.5 Medium |
| Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in Brainstorm Force SureCart surecart allows Stored XSS.This issue affects SureCart: from n/a through 4.9.5. | ||||
| CVE-2026-111948 | 2026-10-21 | 7.1 High | ||
| The User Profile Builder WordPress plugin before 4.0.1 does not escape the current page URL before outputting it in a JavaScript context on one of its admin pages, leading to Reflected Cross-Site Scripting against high-privilege users. | ||||
| CVE-2026-111843 | 2 Cozythemes, Wordpress-extensions | 2 Rootblox, Rootblox | 2026-10-21 | 6.5 Medium |
| Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in CozyThemes Rootblox rootblox allows Stored XSS.This issue affects Rootblox: from n/a through 1.0.7. | ||||
| CVE-2026-111574 | 2026-10-21 | 7.5 High | ||
| The Redirection for Contact Form 7 WordPress plugin before 3.2.12 does not sanitise or escape submitted form data stored as lead entries before outputting it in the lead debug metabox, allowing unauthenticated attackers to store a malicious script that executes when a logged-in user views the entry with the Redirection for Contact Form 7 WordPress plugin before 3.2.12's debug mode enabled. | ||||
| CVE-2026-110884 | 2026-10-21 | 7.1 High | ||
| Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in geekontheroad Live Summary for Gravity Forms live-summary-for-gravity-forms allows Reflected XSS.This issue affects Live Summary for Gravity Forms: from n/a through 1.2.10. | ||||
| CVE-2026-109147 | 2026-10-21 | 7.1 High | ||
| The WP Booking System WordPress plugin before 2.1.0.3 does not validate and escape one of its parameters before reflecting it back in an admin page, leading to Reflected Cross-Site Scripting which could be used against high privilege users such as administrators. | ||||
| CVE-2026-107790 | 2026-10-21 | 6.8 Medium | ||
| The HireZoot WordPress plugin before 4.1.1 does not sanitise and escape some of its stored data before outputting it in the admin dashboard, and additionally reverses the HTML-entity encoding that would otherwise neutralise it, allowing users with the Author role to perform Stored Cross-Site Scripting attacks that execute in the context of a logged-in administrator. | ||||