Export limit exceeded: 395621 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 395621 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (395621 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-9858 | 2026-09-19 | 4.3 Medium | ||
| The Partial Shipment for Woocommerce plugin for WordPress is vulnerable to Missing Authorization in versions up to, and including, 3.4 via the wxp_order_shipment, wxp_order_item_shipment, and wxp_order_set_shipped AJAX actions. This is due to the AJAX handlers in woocommerce-partial-shipment.php (registered at lines 60–62 and implemented at lines 228, 263, and 291) lacking both capability checks and nonce verification, and not validating the calling user's ownership of the supplied order_id. This makes it possible for authenticated attackers, with Subscriber-level access and above, to read arbitrary order item details (names, quantities, shipped counts) belonging to any customer and to modify the shipment status / shipped quantities of any order, which can also trigger order status transitions via the wxp_order_status action. | ||||
| CVE-2026-93190 | 1 Linux | 1 Linux Kernel | 2026-09-19 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: platform/chrome: cros_ec_typec: Reject out-of-bounds PD cap count cros_typec_register_partner_pdos() copies the partner PDOs from the EC TYPEC_STATUS response into the fixed caps_desc.pdo[PDO_MAX_OBJECTS] array. memcpy(caps_desc.pdo, resp->source_cap_pdos, sizeof(u32) * resp->source_cap_count); ... memcpy(caps_desc.pdo, resp->sink_cap_pdos, sizeof(u32) * resp->sink_cap_count); PDO_MAX_OBJECTS is 7. source_cap_count and sink_cap_count are u8 fields from the EC. The only check is that they are not both zero. If either is larger than 7, the memcpy writes past the end of the array on the stack. A count of 255 overflows it by about 1 KB. The EC source arrays are only seven entries wide. A larger count reads past them too. The ChromeOS EC firmware caps these counts today, so a compliant setup does not hit this. The kernel should still validate these values rather than trust them. Validate the counts in cros_typec_register_partner_pdos() next to the memcpy. Skip the PDO registration if either count is above PDO_MAX_OBJECTS. The rest of cros_typec_handle_status() still runs so events are handled and cleared. | ||||
| CVE-2026-93198 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: dm-pcache: validate the persisted dirty_tail chain at load The writeback worker follows the persisted dirty_tail chain, which is decoded from the cache device independently of the key_tail chain that cache_replay() walks and bounds. A crafted image, whose on-media fields are authenticated only by a crc32c with a fixed seed, can aim dirty_tail at a chain of last ksets that never terminates, so cache_writeback_fn() re-arms itself with no delay forever. Walk the dirty_tail chain once at load with the same hop cap cache_replay() uses and fail the table load with -EIO if it does not reach an end within n_segs hops. | ||||
| CVE-2026-93199 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: i3c: master: Do not treat master device as a duplicate target i3c_master_search_i3c_dev_duplicate() searches the bus for another I3C device with the same PID as the reference device. The search can match master->this, causing the controller itself to be returned as a duplicate. Since the controller is not a target device, it cannot be a duplicate of one. Exclude master->this from matching so that the function only returns real duplicate target devices. | ||||
| CVE-2026-93200 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: i3c: master: Fix use-after-free of master->this sysfs attribute callbacks for the master controller device dereference master->this. However, master->this is freed in i3c_master_detach_free_devs() before the master device itself is released. As a result, sysfs accesses can dereference a freed master->this pointer, leading to a use-after-free. Keep master->this alive until i3c_masterdev_release(), which is called after the master device and its sysfs state are being torn down. Do not free master->this as part of the normal device detach path. On the error path in i3c_master_set_info(), reset master->this and bus.cur_master to NULL before freeing the allocated device. | ||||
| CVE-2026-93201 | 1 Linux | 1 Linux Kernel | 2026-09-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: dm-pcache: validate seg_id fields from persistent memory cache_pos_decode(), cache_key_decode() and the last-kset branches of cache_replay(), the writeback worker and the GC worker take a cache segment id from the cache device metadata and index cache->segments[] with it without checking it against cache->n_segs. That metadata is only CRC-protected with a fixed public seed, so whoever supplies the cache device on a table load (CAP_SYS_ADMIN) controls the id; an out-of-range value forms a wild pcache_cache_segment pointer that is dereferenced and written through -- an out-of-bounds read and write driven by on-disk data. Add cache_seg_id_valid() and reject an out-of-range id at each decode site, failing the operation with -EIO instead of indexing past the array. Bound the id against the initialized-segment count (cache_info.n_segs) rather than the physical device total. A forged cache_info.n_segs below seg_num otherwise leaves segments[cache_info.n_segs..seg_num) as zeroed structs whose data pointer is NULL, so a forged id in that window would still be dereferenced. A later patch guarantees cache_info.n_segs <= seg_num, and a driver-created cache sets the two equal, so valid images are unaffected. | ||||
| CVE-2026-93202 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: i3c: master: Fix recursive locking during device registration i3c_master_register_new_i3c_devs() registers newly discovered devices while holding i3c_bus_normaluse_lock(), a down_read(). device_register() can immediately probe the device, and probe callbacks typically invoke I3C helpers that take i3c_bus_normaluse_lock() again, leading to a recursive acquisition of the same rwsem. rwsems do not support recursive read locking and can deadlock when a writer is waiting. See the "Recursive read locks" section of Documentation/locking/lockdep-design.rst. For example, with Intel LPSS I3C, LOCKDEP generates a WARNING like: # echo intel-lpss-i3c.0 > /sys/bus/platform/drivers/mipi-i3c-hci/unbind # echo intel-lpss-i3c.0 > /sys/bus/platform/drivers/mipi-i3c-hci/bind WARNING: possible recursive locking detected kworker/5:1/94 is trying to acquire lock: ffff88811c810d78 (&i3cbus->lock){++++}-{4:4}, at: i3c_device_match_id+0x45/0x370 but task is already holding lock: ffff88811c810d78 (&i3cbus->lock){++++}-{4:4}, at: i3c_master_reg_work_fn+0x21/0x5f0 Fix this by separating device creation from device registration. Populate desc->dev under the maintenance lock, collect the devices that still need registration into a local list, then release the lock before calling device_register(). Finally retake the lock and clean up any devices that failed to register. Use the maintenance lock rather than the normal-use lock while adding device objects. A write-side maintenance lock prevents readers from observing a partially initialized desc->dev during initial device population, or desc->dev disappearing if registration fails. The local list requires a list node, so add a list node member to struct i3c_device. | ||||
| CVE-2026-93204 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: batman-adv: dat: atomically update mac addresses When a MAC address is updated in batadv_dat_entry_add(), it is done using a simple copy function. A parallel reader might only see parts of this update. In worst case, the reader is transporting the half updated MAC address over the network or is creating an ARP response using it - poisoning the ARP cache. atomic64_t can be used to store the 48 bit of a mac address. A reader will then either see the old mac address or the new one - never a mixture of both. | ||||
| CVE-2026-93131 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: platform/x86: dell-privacy: Fix race condition Accessing priv->features_present needs to happen with the list mutex being held, otherwise priv can be freed at any moment. | ||||
| CVE-2026-93132 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ACPI: RISC-V: Fix riscv_acpi_add_prt_dep() loop handling The loop in riscv_acpi_add_prt_dep() includes error conditions that are handled in a dubious - if not outright wrong - way, by continuining the loop (which skips and misses the entry pointer update to point to the next entry). Rewrite the loop as a for loop (that handles the continuation correctly) and wrap the condition and update statements using helper functions to make it cleaner. | ||||
| CVE-2026-93134 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: printk: Fix possible console use-after-free When emitting a record via legacy printing, it is possible that a handover to another legacy printing context occurs. When a context has performed a handover, the console SRCU read lock is released and the pointer to the console struct might now be invalid. Therefore, after calling nbcon_legacy_emit_next_record() or console_emit_next_record(), it is necessary to check if a handover occurred _before_ further @con usage. Sashiko pointed out that console_flush_one_record() was not doing this. In console_flush_one_record(), after emitting a record, move the further usage of @con after the handover check. | ||||
| CVE-2026-93141 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: usb: gadget: r8a66597: avoid double free of ep0_req in probe error path If usb_add_gadget_udc() fails, r8a66597_probe() jumps to err_add_udc and frees ep0_req, then falls through to clean_up2 where ep0_req is freed again when it is non-NULL. Remove the redundant free from err_add_udc and keep the cleanup in clean_up2 so the request is released exactly once. Issue found using a prototype static analysis tool and confirmed by code review. | ||||
| CVE-2026-93143 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: staging: media: ipu7: fix pm_runtime refcount leak in ipu7_resume() ipu7_resume() calls pm_runtime_get_sync() before resuming the device. If the runtime PM resume fails, the usage count remains incremented, but the error path returns without dropping the reference. Use pm_runtime_resume_and_get() instead, which balances the usage count on failure and avoids the leak. Keep returning 0 on error, as resume callbacks should not propagate failures to the PM core, matching the behaviour of the ipu6 driver. | ||||
| CVE-2026-93145 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: clk: qcom: gdsc: tear down per-domain genpds in gdsc_unregister() gdsc_unregister() removes the OF provider entry and tears down the parent/subdomain wiring, but never calls pm_genpd_remove() on the individual generic_pm_domain structures registered by gdsc_init(): void gdsc_unregister(struct gdsc_desc *desc) { struct device *dev = desc->dev; size_t num = desc->num; gdsc_pm_subdomain_remove(desc, num); of_genpd_del_provider(dev->of_node); } That leaves dangling entries on the global gpd_list. After a provider unbind/rebind cycle (deferred-probe replay during early boot, real module unload of a clk driver that owns GDSCs, or an OF-overlay tear- down) the next gdsc_init() will end up trying to re-register a name that is still in the list and pm_genpd_init() returns -EEXIST. While we are here, flip the order so the consumer-facing OF provider entry is the first thing removed -- otherwise a fresh of_genpd_get_from_provider() call racing with the teardown could attach to a domain that is mid-removal. Iterate the scs[] array and pm_genpd_remove() each registered domain after the subdomain links are torn down. The regulators stay devm- managed (devm_regulator_get_optional() in gdsc_register()), so the release happens automatically when the underlying device is unbound; just the genpd accounting needs to be undone explicitly. | ||||
| CVE-2026-93152 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: nvme-apple: Use acquire/release for queue enabled state apple_nvme_init_queue() initializes queue state and then marks the queue enabled. The interrupt and request paths check enabled before using that queue state. The old wmb() after WRITE_ONCE(enabled, true) does not publish the earlier initialization before enabled becomes visible. Use a release store when enabling the queue and acquire loads when testing it. Although the shutdown-side enabled accesses are not used for publishing queue initialization, use helpers for them as well for consistency. | ||||
| CVE-2026-93153 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/bng_re: return a timeout when firmware responses stall __wait_for_resp() documents that it returns a non-zero error when a firmware command does not complete, and bng_re_rcfw_send_message() already marks the firmware as stalled when the helper returns -ENODEV. However, the helper ignores wait_event_timeout() expiry. If the response slot remains in use after the timeout and after the polled CREQ service attempt, the loop starts another full timeout period and can repeat forever. Return -ENODEV after a timed out wait that still has no response. The existing caller then marks FIRMWARE_STALL_DETECTED and returns -ETIMEDOUT to the command issuer. | ||||
| CVE-2026-93156 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: crypto: rk3288 - fail ahash requests on HASH idle timeout rk_hash_run() waits for RK_CRYPTO_HASH_STS to become idle after the final DMA transfer, but ignores the poll result. If the hash engine never becomes idle, the driver still reads the digest registers and finalizes the request with the previous success value. Store the poll result and finalize the request with the timeout error before reading the digest registers. | ||||
| CVE-2026-93157 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: hwrng: xilinx-trng - propagate timeout before any data is read xtrng_readblock32() polls for 16-byte chunks but returns the number of bytes read even when the first poll times out. Its caller then treats a zero return as a short successful read, and partial reads for full 32-byte blocks can make the tail copy use a fixed block offset rather than the amount already produced. Return the poll error when no data has been read, preserve partial positive returns after some data is available, stop the generator on all collection exits, and append tail bytes at the current output count. | ||||
| CVE-2026-93158 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: crypto: sa2ul - stop probe if context pool creation fails sa_ul_probe() calls sa_init_mem() to create the DMA pool used for security context buffers, but ignores its return value. If pool creation fails, probe still continues with DMA setup, algorithm registration and child population even though later request setup depends on that pool. Stop probing when sa_init_mem() fails, and route that failure to the PM cleanup path without attempting to destroy an uncreated DMA pool. | ||||
| CVE-2026-93159 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: crypto: atmel-sha204a - fix heap info leak on I2C transfer failure The nonblocking RNG path allocates a work_data structure to track the state of an in-flight asynchronous I2C request. This pointer is stored in rng->priv and later consumed by the read path once the transaction completes. If the underlying I2C transfer fails, the completion callback is invoked with a non-zero status. In this case, the allocated work_data is not usable for producing RNG output and must not remain associated with the hwrng state. Previously, the failure path only logged a warning but left the pointer state uncleared, which can result in subsequent read attempts observing stale state and interpreting it as valid completion data. Fix this by freeing the pending work_data. The I2C transaction reports an error. This ensures that failed requests do not leave residual state behind that could be interpreted as valid RNG data on later reads. Clearing rng->priv is done at the subsequent call to nonblocking read. | ||||