Export limit exceeded: 399238 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (399238 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-100079 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: usb: typec: ucsi: unregister debugfs entries on teardown ucsi_register() creates per-instance debugfs entries, but ucsi_unregister() keeps them around until ucsi_destroy(). Drivers like ucsi_glink that unregister/register the same UCSI instance across remoteproc restart then try to create an already existing debugfs directory and log: debugfs: 'pmic_glink.ucsi.0' already exists in 'ucsi' Unregister debugfs entries as part of ucsi_unregister(), and clear ucsi->debugfs after freeing it so repeated unregister paths remain safe. | ||||
| CVE-2026-4637 | 1 Paessler | 1 Prtg Network Monitor | 2026-09-25 | N/A |
| Paessler PRTG Network Monitor before version 26.2.120.1449 is affected by a reflected Cross-Site Scripting (XSS) vulnerability. When a request is made for a non-existent resource ending in \".htm\", the web interface returns an HTTP 403 \"Forbidden Path\" error page that echoes the requested URL path into the HTML response body without proper output encoding or sanitization. An unauthenticated, remote attacker can craft a URL containing an HTML/JavaScript payload in the path (e.g. https:////welcome.htm) and, once a victim with an active PRTG session opens the crafted link, execute arbitrary JavaScript in the security context of the PRTG web interface. Because the PRTG session cookie is not protected with the HttpOnly attribute, successful exploitation allows the attacker to read and exfiltrate the victim's session cookie, potentially leading to session hijacking. | ||||
| CVE-2026-98138 | 1 Linux | 1 Linux Kernel | 2026-09-25 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ntfs: do not mark the volume clean in sync_fs when errors were recorded ntfs_put_super() and the remount-read-only path both clear the dirty bit only when NVolErrors(vol) is false. ntfs_sync_fs() clears it unconditionally, so any sync() on a volume that recorded an error marks that volume clean. A volume without this set is then seen as not needing recovery and it does not run one, so whatever went wrong is never repaired. This change skips resetting the dirty bit when there are volume errors. Reproduced on a volume whose $MFTMirr does not match $MFT, which sets the error flag while leaving the mount read-write: after a write and a sync, the on-disk volume flags read 0x0000 with this driver and 0x0001 with the guard in place. | ||||
| CVE-2026-20146 | 1 Cisco | 3 Identity Services Engine, Identity Services Engine Passive Identity Connector, Identity Services Engine Software | 2026-09-25 | 5.5 Medium |
| A vulnerability in Cisco Identity Services Engine (ISE) and Cisco ISE Passive Identity Connector (ISE-PIC) could allow an authenticated, remote attacker to perform path traversal attacks on the underlying operating system to either read or delete arbitrary files. To exploit this vulnerability, the attacker must have valid administrative credentials. This vulnerability is due to improper validation of user-supplied input. An attacker could exploit this vulnerability by sending a crafted HTTP request to an affected system. A successful exploit could allow the attacker to access sensitive files or delete arbitrary files on the affected system. | ||||
| CVE-2026-20147 | 1 Cisco | 3 Identity Services Engine, Identity Services Engine Passive Identity Connector, Identity Services Engine Software | 2026-09-25 | 9.9 Critical |
| A vulnerability in Cisco ISE and Cisco ISE-PIC could allow an authenticated, remote attacker to execute arbitrary commands on the underlying operating system of an affected device. To exploit this vulnerability, the attacker must have valid administrative credentials. This vulnerability is due to insufficient validation of user-supplied input. An attacker could exploit this vulnerability by sending a crafted HTTP request to an affected device. A successful exploit could allow the attacker to obtain user-level access to the underlying operating system and then elevate privileges to root. In single-node ISE deployments, successful exploitation of this vulnerability could cause the affected ISE node to become unavailable, resulting in a denial of service (DoS) condition. In that condition, endpoints that have not already authenticated would be unable to access the network until the node is restored. | ||||
| CVE-2026-20148 | 1 Cisco | 3 Identity Services Engine, Identity Services Engine Passive Identity Connector, Identity Services Engine Software | 2026-09-25 | 4.9 Medium |
| A vulnerability in Cisco ISE and Cisco ISE-PIC could allow an authenticated, remote attacker to perform path traversal attacks on the underlying operating system and read arbitrary files. To exploit this vulnerability, the attacker must have valid administrative credentials. This vulnerability is due to improper validation of user-supplied input. An attacker could exploit this vulnerability by sending a crafted HTTP request to an affected system. A successful exploit could allow the attacker to access sensitive files on the affected system. | ||||
| CVE-2026-20181 | 1 Cisco | 3 Identity Services Engine, Identity Services Engine Passive Identity Connector, Identity Services Engine Software | 2026-09-25 | 9.1 Critical |
| A vulnerability in Cisco ISE and ISE-PIC could allow an authenticated, remote attacker to execute arbitrary commands on the underlying operating system of an affected device. To exploit this vulnerability, the attacker must have valid administrative credentials. This vulnerability is due to insufficient validation of user-supplied input. An attacker could exploit this vulnerability by sending a crafted HTTP request to an affected device. A successful exploit could allow the attacker to obtain user-level access to the underlying operating system and then elevate privileges to root. In single-node deployments, successful exploitation of this vulnerability could cause the affected ISE node to become unavailable, resulting in a denial of service (DoS) condition. In that condition, endpoints that have not already authenticated would be unable to access the network until the node is restored. | ||||
| CVE-2026-20190 | 1 Cisco | 3 Identity Services Engine, Identity Services Engine Passive Identity Connector, Identity Services Engine Software | 2026-09-25 | 7.5 High |
| A vulnerability in Cisco ISE and ISE-PIC could allow an unauthenticated, remote attacker to view sensitive information on an affected device. This vulnerability is due to improper authorization checks when a resource is accessed. An attacker could exploit this vulnerability by sending crafted traffic to an affected device. A successful exploit could allow the attacker to gain access to sensitive information, including hashed credentials that could be used in future attacks. | ||||
| CVE-2026-20136 | 1 Cisco | 3 Identity Services Engine, Identity Services Engine Passive Identity Connector, Identity Services Engine Software | 2026-09-25 | 6 Medium |
| A vulnerability in the CLI of Cisco Identity Services Engine (ISE) and Cisco ISE Passive Identity Connector (ISE-PIC) could allow an authenticated, local attacker with administrative privileges to perform a command injection attack on the underlying operating system and elevate privileges to root. This vulnerability is due to insufficient validation of user supplied input. An attacker could exploit this vulnerability by providing crafted input to a specific CLI command. A successful exploit could allow the attacker to elevate their privileges to root on the underlying operating system. | ||||
| CVE-2026-95834 | 1 Kovidgoyal | 1 Kitty | 2026-09-25 | N/A |
| Use After Free in the drag source path of the drag and drop protocol in kitty from 0.47.0 before 0.49.0 allows a program writing to the terminal to cause the terminal to read from and write to freed heap memory, because drag_remote_file_data() in kitty/dnd.c holds a DragRemoteItem pointer into an array it does not own, calls toplevel_data_for_drag() or subdir_data_for_drag(), and then continues to use that pointer. Those helpers, and add_payload() and populate_dir_entries() which they call, report errors through the abrt() macro, which expands to cancel_drag() followed by a plain return, and cancel_drag() calls drag_free_offer(), which frees the array the pointer refers to. The helpers return void, so the caller receives no indication that the teardown happened, and proceeds to call all_children_complete() on the freed pointer, which dereferences it, and then to write through it. That dereference is guarded by a local flag that is set when the request carries no payload and announces no further data, which is the same condition that selects the finalisation block of add_payload(), so the error paths in that block reach it: a create that fails because an entry of the same name already exists, because the client may declare two entries with one name and the create operations use O_CREAT with O_EXCL and symlinkat(), a mkdirat() failure other than EEXIST, and the directory entry allocation paths. Both branches reach it. In the top level branch the caller's pointer is never cleared, so clearing the owning structure's own pointers during teardown does not help. In the sub directory branch subdir_data_for_drag() sets the caller's pointer to NULL on entry and assigns it only after its own last error path, so its own aborts leave the caller with NULL and are stopped by a null check, but it then calls add_payload() with that pointer set, and an abort there leaves the caller holding a freed child node inside the item tree, which drag_free_offer() frees by recursion. This results in undefined behaviour in the terminal process, reachable from the byte stream of any program running in the window. | ||||
| CVE-2026-97737 | 1 Muety | 1 Wakapi | 2026-09-25 | 7.4 High |
| In Wakapi before 2.17.6, the user caching service allows a lookup to be resolved in an unintended lookup context, leading to account takeover. | ||||
| CVE-2026-97731 | 1 Minio | 1 Minio | 2026-09-25 | 7.1 High |
| MinIO through 7aac2a2 does not verify that every x-amz-* header present on a request also appears in the client-supplied X-Amz-SignedHeaders list. extractSignedHeaders() in cmd/signature-v4-utils.go iterates only the claimed list and never enumerates the headers that actually arrived, and thus a header that arrives unsigned is neither hashed into the canonical request nor rejected. Because cmd/api-router.go dispatches CopyObject on the presence of x-amz-copy-source alone, the holder of a presigned PUT URL scoped to a single object can add that header to the unmodified URL and cause a server-side copy, executed as the signer, of any object the signing key can read. A grant to write one object becomes a read of every bucket that key can reach. Amazon S3 rejects the equivalent request with HTTP 403 AccessDenied. The minio/minio GitHub repository was archived in April 2026; pgsty/silo before 1233254 is also affected. | ||||
| CVE-2026-97646 | 1 Ningzichun | 1 Student-management-system | 2026-09-25 | 7.3 High |
| A weakness has been identified in ningzichun student-management-system up to 98760f5711cf6dc8b4adca53a9e207ca49b02ebf. This affects an unknown function of the file admin/fun/getStudent.php. This manipulation of the argument sid causes authorization bypass. The attack is possible to be carried out remotely. The exploit has been made available to the public and could be used for attacks. The project was informed of the problem early through an issue report but has not responded yet. | ||||
| CVE-2026-85417 | 1 Brocade | 1 Sannav | 2026-09-25 | N/A |
| Incomplete property masking in the SANnav logging subsystem permits SNMP authentication and privacy passwords to be recorded in application logs under specific configuration conditions. Individuals with read access to system logs or support bundles can retrieve these credentials, leading to unauthorized read or management access to monitored switch environments | ||||
| CVE-2026-98078 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ipvs: fix reversed sequence option serialization hton_seq() expects the host-order source first and the unaligned network-order destination second. The version 1 sync sender passes these arguments in reverse for both sequence blocks. This leaves 24 bytes of the kmalloc-backed message unwritten. It may disclose stale heap data and replace the live connection sequence state with values read from the buffer. Pass the connection sequence state as the source and the message payload as the destination for both blocks. | ||||
| CVE-2026-98081 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: zoned: finish active block group cleanup if call_zone_finish() fails do_zone_finish() clears BLOCK_GROUP_FLAG_ZONE_IS_ACTIVE before finishing the zones. If call_zone_finish() then fails it returned early, leaving the now inactive block group on fs_info->zone_active_bgs, leaking its reference, the BTRFS_FS_NEED_ZONE_FINISH waiters are never woken, and as its alloc_offset equals the zone capacity btrfs_zone_finish_one_bg() keeps selecting it, spinning btrfs_zoned_activate_one_bg(). Fall through to the cleanup on failure too and return the error, but keep the block group read-only as its zones are left inconsistent. | ||||
| CVE-2026-98083 | 1 Linux | 1 Linux Kernel | 2026-09-25 | 7 High |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: fix transaction use-after-free in raid stripe insertion If allocation of a RAID stripe extent fails, btrfs_insert_one_raid_extent() aborts and ends the transaction before returning -ENOMEM. btrfs_finish_one_ordered(), the production caller through btrfs_insert_raid_extent(), still owns the transaction handle. It handles the error by aborting the transaction and then reaches the common exit path, which ends the transaction again. The premature end can free the handle and drop its transaction reference. Transaction cleanup can then free the transaction before the caller's second abort accesses the handle and transaction, resulting in use-after-free. Keep the abort at the failure site, but let the caller's common exit path end the transaction once, after it has finished using both objects. | ||||
| CVE-2026-98084 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: bpf: backtracking shouldn't clear outer frame R1-R5 for callbacks When processing calls to bpf_loop() verifier marks R1 (and R4) as precise. R1 tracks loop iterations number and because of the 'callback_depth < R1' mechanics in check_helper_call() must be marked precise. However, precision propagation for R1 was broken, when bpf_loop() call was verified on a second iteration. Consider the following verification trace: - main: bpf_loop(nr_loops, callback ...) - callback: BPF_EXIT - main: bpf_loop(nr_loops, callback ...) - ... While the first visit of the call to bpf_loop() propagated R1 precision as expected, the second call to mark_chain_precision() in the check_helper_call() set R1, but it was immediately reset when backtrack_insn() processed preceding BPF_EXIT in the loop deleted in this patch. Because of that, the second visit of the call to bpf_loop() injected checkpoint with R1 not marked as precise. Which could trick the verifier into accepting unsafe programs. See the next patch for an example of such program. Commit is structured in a way to minimize conflicts when 'bpf' would be eventually merged with 'bpf-next'. | ||||
| CVE-2026-98086 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: ump: do not touch legacy_rmidi before it exists snd_ump_parse_endpoint() sets ump->parsed on every exit, including error, before the caller attaches the legacy rawmidi device. ump_handle_ep_name_msg() then treats parsed as "legacy_rmidi is live" and calls ump_legacy_set_rawmidi_name(), which snprintf()s into ump->legacy_rmidi->name. If a UMP packet arrives in that window (IRQ path from snd_ump_receive), legacy_rmidi is still NULL (KASAN null-ptr-deref in snprintf). Guard the legacy helpers. parsed only means endpoint info was parsed, not that legacy_rmidi exists. | ||||
| CVE-2026-98088 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: scsi: mpt3sas: Avoid out-of-bounds cpumask_of_node() call in _base_assign_reply_queues() dev_to_node() can return NUMA_NO_NODE (-1) on systems without NUMA topology information for the PCI device, such as single-socket boards that don't expose device-to-node affinity. Passing -1 directly into cpumask_of_node() indexes node_to_cpumask_map[-1], an out-of-bounds array read caught by UBSAN: UBSAN: array-index-out-of-bounds in arch/x86/include/asm/topology.h:72:28 index -1 is out of range for type 'cpumask *[1024]' Fall back to cpu_online_mask when no NUMA node is available, rather than assuming dev_to_node() always returns a valid node index. | ||||