Export limit exceeded: 51129 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (51129 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-47857 | 2 Broadcom, Spring | 2 Reactor Core, Reactor Core | 2026-09-04 | 5.9 Medium |
| In Reactor Core, applications that use the Flux.windowTimeout operator with fairBackpressure enabled are vulnerable to a Denial of Service (DoS) condition. Reactor Core 3.8.0 - 3.8.6 Reactor Core 3.5.0 - 3.7.19 Reactor Core 3.4.41 and earlier | ||||
| CVE-2026-80869 | 1 Linux | 1 Linux Kernel | 2026-09-04 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ntfs: bound the attribute-list entry in ntfs_read_inode_mount() The $MFT attribute-list walk in ntfs_read_inode_mount() validates each entry only with "(u8 *)al_entry + 6 > al_end" and "(u8 *)al_entry + le16_to_cpu(al_entry->length) > al_end", but then reads al_entry->lowest_vcn (an __le64 at offset 8) and al_entry->mft_reference (offset 16) -- fields beyond the 6 bytes proven in range. al_entry->length is attacker-controlled and only required non-zero, so a short entry (e.g. length 8) placed at the tail passes both checks while the lowest_vcn / mft_reference reads fall past al_end. al_end is ni->attr_list + attr_list_size (the on-disk size); the buffer is kvzalloc(round_up(attr_list_size, SECTOR_SIZE)), so the sector rounding usually absorbs the over-read -- but when attr_list_size is a multiple of SECTOR_SIZE there is no slack and a crafted $MFT attribute list produces an out-of-bounds read at mount time. Validate the entry with ntfs_attr_list_entry_is_valid() (added in patch 1/3) before dereferencing it, matching the bound the other attribute-list walks now use. The validator already requires the length to cover the fixed header, which makes the separate "!al_entry->length" check redundant, so drop it too. | ||||
| CVE-2026-80874 | 1 Linux | 1 Linux Kernel | 2026-09-04 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: arm64: dts: renesas: ironhide: Describe inline ECC carveouts The DBSC5 DRAM controller protects DRAM content using inline ECC. The inline ECC utilizes areas of DRAM for its operation, which are in the DRAM address range, but must not be accessed or modified. Describe the inline ECC carveout areas used by the DBSC5 controller on this hardware as reserved-memory, which must not be accessed. Include DRAM areas which are unprotected by ECC as well, those are parts of the DRAM which directly precede the ECC carveout. In case of high DRAM utilization, unless the inline ECC carveouts are properly reserved, Linux may use and corrupt the memory used by the DBSC5 DRAM controller for inline ECC, which would lead to the system becoming unstable. | ||||
| CVE-2026-14479 | 1 Autodesk | 1 Installer | 2026-09-04 | 5.5 Medium |
| A maliciously crafted input, when processed by the Autodesk Installer IPC frame parser, may trigger improper validation of an input-specified position or offset, resulting in an out-of-range substring operation. A malicious actor may leverage this vulnerability to cause the NT AUTHORITY\SYSTEM service to terminate unexpectedly, resulting in a denial-of-service condition. | ||||
| CVE-2026-80893 | 1 Linux | 1 Linux Kernel | 2026-09-04 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: mm/hugetlb: fix swap entry corruption when clearing uffd-wp at fork() copy_hugetlb_page_range() clears the uffd-wp bit of migration and hwpoison entries with huge_pte_clear_uffd_wp(), which operates on the present-PTE bit position. Swap entries keep the uffd-wp state elsewhere -- the migration branch reads and sets it with pte_swp_uffd_wp() and pte_swp_mkuffd_wp() -- and the present-PTE position falls into the swap payload. On x86-64 it lands in the inverted swap offset, where a naturally-aligned hugetlb PFN always has the affected bit set, so the clear advances the encoded PFN by two pages. No userfaultfd needs to be involved: the clear is guarded only by the child VMA not being uffd-wp registered, so a plain fork() with an in-flight hugetlb migration entry (or a poisoned hugetlb page) corrupts the entry copied into the child. Instrumenting the clear and forking after MADV_HWPOISON on a 2MB anon hugetlb page shows: offset before=120e00 offset after =120e02 The fallout is mostly latent: rmap walks match migration entries by folio range and remove_migration_pte() rebuilds the PTE from the folio, so a within-folio PFN skew heals once migration completes. But any path that re-encodes the corrupted offset -- e.g. hugetlb_change_protection() rewriting a writable migration entry via make_readable_migration_entry(swp_offset(entry)) -- propagates it. Migration entries legitimately carry uffd-wp, so clear it with pte_swp_clear_uffd_wp(), matching copy_nonpresent_pte() and move_huge_pte(). A hwpoison entry, on the other hand, never carries the uffd-wp bit: it is installed fresh by make_hwpoison_entry() (try_to_unmap_one() does not preserve uffd-wp on the hwpoison path) and hugetlb_change_protection() leaves hwpoison entries untouched. There was nothing to clear there, only the corruption, so drop the clear entirely. | ||||
| CVE-2026-47842 | 2 Spring, Vmware | 2 Spring Security, Spring Security | 2026-09-04 | 6.5 Medium |
| Applications using AesBytesEncryptor with the two-argument constructor or when passing a null IV generator and CBC as the encryption mode encrypt data with AES/CBC using a null (all-zero) initialization vector. Spring Security 7.1.0 Spring Security 7.0.0 - 7.0.6 Spring Security 6.5.0 - 6.5.11 Spring Security 6.4.0 - 6.4.18 Spring Security 5.8.0 - 5.8.27 Spring Security 5.7.0 - 5.7.25 | ||||
| CVE-2026-80839 | 1 Linux | 1 Linux Kernel | 2026-09-04 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: batman-adv: reject unrepresentable multicast TVLV offsets The network and transport header fields in struct sk_buff are 16-bit offsets from skb->head, and U16_MAX is reserved as the unset transport header value. batadv_tvlv_call_handler() sets both fields from a received multicast TVLV without checking whether the TVLV end is representable. If the end offset exceeds the field's range, skb_set_transport_header() truncates it so that the transport header precedes the network header. The negative difference is then returned by skb_network_header_len() as a large u32. batadv_mcast_forw_packet() consequently accepts an oversized multicast tracker and accesses memory beyond the skb data. Add skb_set_transport_header_careful(), an offset-aware counterpart to skb_reset_transport_header_careful(), which validates the final head-relative offset before assigning it. Use the new helper in batadv_tvlv_call_handler() and reject unrepresentable TVLVs before setting the network header. | ||||
| CVE-2026-80844 | 1 Linux | 1 Linux Kernel | 2026-09-04 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: xfrm: ah6: validate routing header segments_left AH6 rearranges routing-header addresses before computing or verifying the ICV. ipv6_rearrange_rthdr() assumes that segments_left is not larger than the number of addresses described by the routing header's hdrlen field. That assumption does not hold for raw IPv6 HDRINCL packets. A packet with hdrlen equal to 2 describes one address, but can carry an arbitrary segments_left value. With segments_left equal to 255, the function moves its address pointer 4,064 bytes backwards and passes a 4,064-byte length to memmove(), resulting in an out-of-bounds access. Validate the invariant locally before modifying the routing header or performing any address-pointer arithmetic, and propagate malformed-header errors to the existing AH6 input and output error paths. | ||||
| CVE-2026-59847 | 2 Libssh, Redhat | 4 Libssh, Enterprise Linux, Hardened Images and 1 more | 2026-09-04 | 5.9 Medium |
| A flaw was found in libssh. Incorrect AES-GCM finalization checks in builds using the OpenSSL backend can effectively remove integrity protection, allowing an in-path attacker to modify plaintext on the wire without detection. | ||||
| CVE-2026-59317 | 2 Spring, Vmware | 2 Spring For Apache Kafka, Spring For Apache Kafka | 2026-09-04 | 6.5 Medium |
| DeadLetterPublishingRecovererFactory reads the retry_topic-original-timestamp header from an inbound ConsumerRecord and passes its raw bytes directly to new BigInteger(header.value()) with no length or format validation. Spring for Apache Kafka 4.1.0 Spring for Apache Kafka 4.0.0 - 4.0.6 Spring for Apache Kafka 3.0.0 - 3.3.16 Spring for Apache Kafka 2.9.0 - 2.9.14 Spring for Apache Kafka 2.8.12 and earlier | ||||
| CVE-2026-85654 | 1 Amazon | 1 Awslabs.dynamodb-mcp-server | 2026-09-04 | 7.8 High |
| Improper neutralization of special elements used in a template engine in the CDK generator in Amazon awslabs.dynamodb-mcp-server before 2.1.6 might allow a context-dependent actor to execute arbitrary code on the host that deploys the generated application via crafted table, index, or attribute names in a data model file. | ||||
| CVE-2026-85509 | 1 Freeipmi | 1 Freeipmi | 2026-09-04 | 9.8 Critical |
| FreeIPMI before 1.6.19 has a stack-based buffer overflow in _read_fru_data in libfreeipmi/fru/ipmi-fru.c when a BMC returns more bytes than requested. | ||||
| CVE-2026-18167 | 1 Tp-link | 1 Archer Ax55 V4 | 2026-09-04 | N/A |
| A stack-based buffer overflow vulnerability exists in the EasyMesh module of TP-Link Archer AX55 v4. When Mesh mode is enabled, a LAN attacker may submit crafted input that causes the easymesh daemon to crash and may potentially achieve remote code execution on the device. Successful exploitation may cause the EasyMesh daemon to crash and may potentially allow remote code execution when Mesh mode is enabled. This may result in high impact to the confidentiality, integrity, and availability of the affected device. | ||||
| CVE-2026-69419 | 1 Microsoft | 1 Azure Data Manager For Energy | 2026-09-04 | 8.5 High |
| Integer overflow or wraparound in Azure Data Manager for Energy allows an authorized attacker to execute code over a network. | ||||
| CVE-2026-64389 | 1 Linux | 1 Linux Kernel | 2026-09-04 | 8.2 High |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: validate NTLMv2 response before updating session key ksmbd_auth_ntlmv2() derives the NTLMv2 session key into sess->sess_key before it verifies the NTLMv2 response. ksmbd_decode_ntlmssp_auth_blob() then continues into KEY_XCH even when ksmbd_auth_ntlmv2() failed. With SMB3 multichannel binding, the failed authentication operates on an existing session and the session setup error path does not expire binding sessions. A client can send a binding session setup with a bad NT proof and KEY_XCH and still modify sess->sess_key before STATUS_LOGON_FAILURE is returned. Relevant path: smb2_sess_setup() -> conn->binding = true -> ntlm_authenticate() -> session_user() -> ksmbd_decode_ntlmssp_auth_blob() -> ksmbd_auth_ntlmv2() -> calc_ntlmv2_hash() -> hmac_md5_usingrawkey(..., sess->sess_key) -> crypto_memneq() returns mismatch -> KEY_XCH arc4_crypt(..., sess->sess_key, ...) -> out_err without expiring the binding session Derive the base session key into a local buffer and copy it to sess->sess_key only after the proof matches. Return immediately on authentication failure so KEY_XCH is only processed after successful authentication. | ||||
| CVE-2026-80825 | 1 Linux | 1 Linux Kernel | 2026-09-04 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7925: ensure tx headroom in usb_sdio_tx_prepare_skb mt7925_usb_sdio_tx_prepare_skb() pushes a TX descriptor and a USB header onto every skb and assumes the headroom for them is already there. That holds for locally generated traffic, where mac80211 reserves hw->extra_tx_headroom, but forwarded frames are sent through ieee80211_8023_xmit(), which does not reserve it. Bridge a wired interface to an mt7925u AP and the first forwarded frame that arrives short panics the kernel: skbuff: skb_under_panic: len:415 put:4 tail:0x19b end:0x640 dev:wlan1 kernel BUG at net/core/skbuff.c:212! Call trace: skb_panic+0x58/0x60 (P) skb_push+0x58/0x60 mt7925_usb_sdio_tx_prepare_skb+0xf8/0x1b8 [mt7925_common] mt76u_tx_queue_skb+0xa0/0x1f8 [mt76_usb] __mt76_tx_queue_skb+0x54/0xe8 [mt76] mt76_txq_schedule.part.0+0x204/0x478 [mt76] mt76_txq_schedule_all+0x50/0x80 [mt76] mt792x_tx_worker+0x68/0x100 [mt792x_lib] __mt76_worker_fn+0x84/0x150 [mt76] Whether a given setup hits it depends on how much headroom the ingress netdev leaves in its rx skbs. Reproduced on a Raspberry Pi 5 bridging onboard ethernet to a Netgear A9000; originally reported on an MT7986 router running OpenWrt. Nick Morrow's testing on a Pi 4 (bcmgenet), which leaves more headroom, helped narrow the trigger to the ingress path. The same bug was fixed on mt7921 by commit 98c4d0abf5c4 ("mt76: mt7921: don't assume adequate headroom for SDIO headers"), but mt7925 was copied from mt7921 without the fix. Add the same guard here. | ||||
| CVE-2026-80827 | 1 Linux | 1 Linux Kernel | 2026-09-04 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: USB: serial: option: fix slab OOB read in interrupt URB callback The interrupt URB buffer is allocated in setup_port_interrupt_in() based on the endpoint's wMaxPacketSize: buffer_size = usb_endpoint_maxp(epd); port->interrupt_in_buffer = kmalloc(buffer_size, GFP_KERNEL); When a USB device declares wMaxPacketSize = 8 on its interrupt IN endpoint, the buffer is allocated from kmalloc-8 cache (exactly 8 bytes). If the device sends a short packet (actual_length < wMaxPacketSize), the URB completes with status == 0 and the callback proceeds to read: data[sizeof(struct usb_ctrlrequest)] which evaluates to data[8], accessing 1 byte beyond the allocated 8-byte buffer. This results in a slab out-of-bounds read. Fix this by adding the missing bounds check: first verify that the actual length is large enough to contain the struct usb_ctrlrequest header before accessing req_pkt->bRequestType and req_pkt->bRequest, and then verify that there is an additional byte for the modem signal state before reading data[sizeof(struct usb_ctrlrequest)] inside the conditional. Use sizeof(*req_pkt) instead of sizeof(struct usb_ctrlrequest) for consistency. [ johan: use dev_err(); split signals declaration and initialisation ] | ||||
| CVE-2026-80829 | 1 Linux | 1 Linux Kernel | 2026-09-04 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: usb-audio: fix OOB write in snd_usbmidi_novation_output() snd_usbmidi_novation_output() lays out a two-byte header at transfer_buffer[0..1] and passes &transfer_buffer[2] together with a length of ep->max_transfer - 2 to snd_rawmidi_transmit(): count = snd_rawmidi_transmit(ep->ports[0].substream, &transfer_buffer[2], ep->max_transfer - 2); ep->max_transfer comes from the output endpoint's wMaxPacketSize via usb_maxpacket(). A malformed or malicious device can advertise a bulk OUT endpoint with a wMaxPacketSize of 1 - the USB core only clamps this value downwards - so ep->max_transfer becomes 1 and the count argument becomes -1. snd_rawmidi_transmit() passes the negative count on to __snd_rawmidi_transmit_peek(), where "if (count1 > count) count1 = count" leaves count1 negative; get_aligned_size() keeps it negative for a byte-stream substream, so the following memcpy(buffer, ..., count1) runs with a (size_t)-1 length and writes far past the transfer buffer, which was allocated with usb_alloc_coherent(ep->max_transfer). This is the same class of bug that was fixed for snd_usbmidi_akai_output() in commit 0970274613fb ("ALSA: usb-audio: fix OOB write in snd_usbmidi_akai_output()"); the novation output routine was left unguarded. Bail out when the endpoint cannot hold the two-byte header plus at least one payload byte. | ||||
| CVE-2026-80831 | 1 Linux | 1 Linux Kernel | 2026-09-04 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: crypto: mxs-dcp - fix source scatterlist length access mxs_dcp_aes_block_crypt() uses sg_dma_len() without mapping the source scatterlist with dma_map_sg() first. Therefore, sg_dma_len() is invalid and could return zero or a stale DMA length, causing encryption and decryption to process the wrong number of bytes when CONFIG_NEED_SG_DMA_LENGTH=y. Use the original scatterlist length instead. | ||||
| CVE-2022-31684 | 2 Broadcom, Redhat | 3 Reactor Netty, Camel Spring Boot, Openshift Application Runtimes | 2026-09-04 | 4.3 Medium |
| Reactor Netty HTTP Server, in versions 1.0.11 - 1.0.23, may log request headers in some cases of invalid HTTP requests. The logged headers may reveal valid access tokens to those with access to server logs. This may affect only invalid HTTP requests where logging at WARN level is enabled. | ||||