Export limit exceeded: 10518 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (10518 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-89951 | 1 Linux | 1 Linux Kernel | 2026-09-18 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: batman-adv: fix stale receive device on merged fragments Fragment reassembly reuses the skb from the highest-numbered buffered fragment as the merged packet. When that fragment was received on a hard interface which is deleted before the chain completes, the merged skb can re-enter the receive path with a stale skb->dev and skb_iif. batadv_batman_skb_recv() passes such merged packets through the normal receive handlers again. DAT and bridge loop avoidance both derive the ARP header length from skb->dev, so they can dereference the freed net_device before the packet reaches the local mesh interface. Refresh the receive device metadata from the current receive device before running the packet handlers. This keeps internally reinjected merged fragments consistent with the normal receive path after hard interface teardown. | ||||
| CVE-2026-90002 | 1 Linux | 1 Linux Kernel | 2026-09-18 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ftrace: Take trace_array reference before accessing its ftrace_ops The trace instance files set_ftrace_filter and set_ftrace_notrace was updated to work with specific trace instances (trace_arrays). The issue is that when these files are opened, there is a small race window where it will use the ftrace_ops from the inode->private pointer to get a reference to the trace_array and then take its reference. The problem is that the ftrace_ops itself could be freed. If the rmdir on the instance happens at the same time the set_ftrace_filter file is opened, the rmdir could have also freed the ftrace_ops and referencing it will cause a use-after-free bug and crash the kernel. Instead, pass in the trace_array as the file private data (NULL for the top level instance), and then pass both the trace_array and the ftrace_ops to the ftrace_regex_open() function. If the trace_array is NULL, then it just uses the ftrace_ops without the need to take its reference (like normal). If the ftrace_ops is NULL, that is only the case for the top level instance and the global_ops can be used. This allows the trace_array to have its reference incremented before touching the ftrace_ops that could also be freed when the instance is. | ||||
| CVE-2026-90003 | 1 Linux | 1 Linux Kernel | 2026-09-18 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: futex: Prevent rcuwait use-after-free during requeue PI On PREEMPT_RT, FUTEX_CMP_REQUEUE_PI can trigger a KASAN report (slab-out-of-bounds) in futex_requeue_pi_complete() invocation of rcuwait_wake_up(). The futex_q used by futex_wait_requeue_pi() is allocated on the waiter's stack. An early wakeup can race with a PI requeue as follows: waiter requeue task ------ ------------ futex_wait_requeue_pi() futex_do_wait() schedule() futex_requeue futex_proxy_trylock_atomic() futex_requeue_pi_prepare() Q_REQUEUE_PI_NONE -> Q_REQUEUE_PI_IN_PROGRESS * timeout/ signal wakes waiter * futex_requeue_pi_wakeup_sync() Q_REQUEUE_PI_IN_PROGRESS -> Q_REQUEUE_PI_WAIT requeue_pi_wake_futex futex_requeue_pi_complete() cmpxchg Q_REQUEUE_PI_WAIT -> Q_REQUEUE_PI_LOCKED rcuwait_wait_event() if (atomic_read(&q->requeue_state) != Q_REQUEUE_PI_WAIT) break /* no schedule() */ /* q.pi_state->owner == current */ futex_private_hash_put() /* return from syscall */ rcuwait_wake_up(&q->requeue_wait) /* q is gone */ futex_requeue_pi_complete() publishes Q_REQUEUE_PI_LOCKED before calling rcuwait_wake_up(). The waiter observes this state in rcuwait_wait_event() before invoking schedule() in rcuwait_wait_event(). Here, the waiter is free leave the syscall before requeue task can complete the wake. To address this race skip rcuwait_wake_up() in the Q_REQUEUE_PI_LOCKED case. This state is only published by requeue_pi_wake_futex(), which saves q->task before futex_requeue_pi_complete() and wakes the waiter via wake_up_state(). This wake is intended to wake the waiter from its futex_do_wait() sleep. If the waiter is still sleeping there, it can not get into the Q_REQUEUE_PI_WAIT state (and require this removed wake). Should the waiter be woken up from futex_do_wait() by other means (as in this example) and sleep in futex_requeue_pi_wakeup_sync() then the wake_up_state() from requeue_pi_wake_futex() will wake it, too. Should the waiter task terminate before wake_up_state() had a chance to wake the task then the task pointer does not become invalid because the futex_hash_bucket::lock is held and the task pointer is RCU protected. [bigeasy: Updated comment and commit message] | ||||
| CVE-2026-89956 | 1 Linux | 1 Linux Kernel | 2026-09-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: s390/vfio-ap: Fix missing lock required to access list of ap_matrix_mdev objects In order to traverse or add/remove ap_matrix_mdev objects in the matrix_dev->mdev_list, the matrix_dev->guests_lock mutex must be held. There are two functions that access the list without holding the mutex: vfio_ap_mdev_probe function ~~~~~~~~~~~~~~~~~~~~~~~~~~~ The vfio_ap_mdev_probe function uses the matrix_dev->mdevs_lock mutex to guard the add of a newly created ap_matrix_mdev object to the matrix_dev->mdev_list. This mutex does not protect list access; its purpose is to guard against concurrent access to fields contained in an ap_matrix_mdev object. This could lead to kernel memory corruption or use-after-free if another mdev is created or removed concurrently. The adding of an ap_matrix_mdev object to matrix_dev->mdev_list is now guarded by the matrix_dev->guests_lock which is the correct way to protect against concurrent mdev_list access. Also removed the following two lines of code because the matrix_mdev is allocated via vfio_alloc_device macro which uses kzalloc, so req_trigger and cfg_chg_trigger are already zero-initialised when the struct is allocated before the call to vfio_register_emulated_iommu_dev. This prevents a window whereby these triggers are set to NULL after the device is exposed to userspace. matrix_mdev->req_trigger = NULL; matrix_mdev->cfg_chg_trigger = NULL; vfio_ap_mdev_for_queue function ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ The status_show function that supports display of the status attribute of the devices in /sys/bus/ap/devices calls the vfio_ap_mdev_for_queue function which iterates the matrix_dev->mdev_list to find the object representing the queue device whose status is to be displayed. In order to traverse this list, the matrix_dev->guests_lock mutex must be held. To fix this, the guests_lock mutex is taken prior to taking the matrix_dev->mdevs_lock mutex in the status_show function. It is taken there rather than the vfio_ap_mdev_for_queue function - where it is needed - because it must be taken prior to the mdevs_lock mutex in order to adhere to the proper locking order and prevent a lockdep splat; also because the mdevs_lock is needed there to access fields within the matrix_mdev object in that function. See the vfio-ap-locking.rst in the linux kernel tree. | ||||
| CVE-2026-89974 | 1 Linux | 1 Linux Kernel | 2026-09-18 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: nvme-fc: fix double free of fabrics options when nvme_add_ctrl() fails nvmf_create_ctrl() owns the fabrics options and frees them whenever ->create_ctrl() returns an error, so a transport must not free them on its own error paths. nvme-fc tracks this by testing ctrl->ctrl.opts in nvme_fc_ctrl_free(), which requires nvme_fc_init_ctrl() to clear that pointer on every error exit. The coupling is implicit, and commit 1a9e218195a5 ("nvme: split device add from initialization") broke it by adding a second error exit. When nvme_add_ctrl() fails, nvme_fc_init_ctrl() jumps to out_put_ctrl:, past the "ctrl->ctrl.opts = NULL" that only sits on the fail_ctrl: path, so nvme_fc_ctrl_free() frees the options and nvmf_create_ctrl() frees them a second time: BUG: KASAN: slab-use-after-free in nvmf_free_options+0x30/0x190 nvmf_free_options+0x30/0x190 drivers/nvme/host/fabrics.c:1284 nvmf_create_ctrl drivers/nvme/host/fabrics.c:1374 [inline] Freed by task 5534: nvme_fc_ctrl_free drivers/nvme/host/fc.c:2374 [inline] nvme_fc_init_ctrl+0xe17/0x1450 drivers/nvme/host/fc.c:3605 nvme_add_ctrl() fails when dev_set_name() cannot allocate, so this is reachable under memory pressure or fault injection. Without KASAN the options are freed twice. Rather than clear the pointer on the second exit as well, derive ownership the way nvme-tcp, nvme-rdma and nvme-loop do, from list membership: their free_ctrl leaves the options alone unless the controller made it onto the transport list. The list cannot simply be populated on the success path as it is there. nvme-fc runs the initial connect synchronously via flush_delayed_work(), and the controller has to be reachable on rport->ctrl_list for the whole of it: nvme_fc_unregister_remoteport() needs to find it to signal connectivity loss, nvme_fc_match_disconn_ls() matches an incoming Disconnect Association LS against ctrl->association_id, which is only assigned during that window, nvme_fc_resume_controller() needs it on remoteport re-registration, and nvme_fc_existing_controller() uses it to reject a duplicate connect racing the one in flight. Keep the insertion where it is and add a fail_unlist: label, falling into fail_ctrl:, for the error paths that run after it. The earlier error paths never reach the insertion and keep using fail_ctrl: directly, so the list is only touched where the controller is actually on it. nvme_fc_ctrl_free() cannot use the plain "goto free_ctrl" the other transports use, because it still has to put_device(), release the rport reference and free the ida entry for resources taken before the insertion. Sample list_empty() under rport->lock instead. ctrl->ctrl.opts also stays valid for the whole teardown now. That is not the bug being fixed, but it removes some fragility around the old idiom: nvme_free_ctrl() calls nvme_auth_free() before ->free_ctrl(), and ctrl_max_dhchaps() dereferences ctrl->opts without a NULL check when ctrl->dhchap_ctxs is set, which nvme-fc permits since NVMF_ALLOWED_OPTS allows the dhchap options. The nvme sysfs attributes that dereference ctrl->opts, such as hostnqn and address, evaluate their is_visible() test once at device_add() time and stay readable until cdev_device_del(). | ||||
| CVE-2026-89998 | 1 Linux | 1 Linux Kernel | 2026-09-18 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: dm: fix race when loading and unloading a table If the userspace calls two concurrent table load ioctls and one of them succeeds and the other fails, there is a race condition because dm_setup_md_queue walks &md->table_devices without any lock. If the walk races with dm_table_destroy -> free_devices -> dm_put_table_device, there is access to invalid memory. Fix this race by extending the lock over the list walk. | ||||
| CVE-2026-90049 | 1 Linux | 1 Linux Kernel | 2026-09-18 | 9.3 Critical |
| In the Linux kernel, the following vulnerability has been resolved: net: skbuff: don't skb_tx_error() the source skb in skb_zerocopy() skb_zerocopy() copies frags from @from into @to. On an skb_orphan_frags() failure it calls skb_tx_error(@from), a destructive operation on the source skb the copy helper does not own. That completes @from's zerocopy uarg and clears SKBFL_ALL_ZEROCOPY, including the SKBFL_SHARED_FRAG page-ownership marker. Both callers already report the failure on their own drop path. nfnetlink_queue does it at nla_put_failure, and Open vSwitch does it in the flow-miss drop arm of ovs_dp_process_packet(), so nothing is lost by dropping it here. On Open vSwitch's OVS_ACTION_ATTR_USERSPACE path the skb is not freed on this error: do_execute_actions() ignores output_userspace()'s return value and, unless the upcall was the last action, keeps forwarding the same skb through the flow's remaining actions. The uarg is completed while that skb is still in flight, telling the producer its buffers are free, and SKBFL_SHARED_FRAG is cleared on an skb the rest of the stack still handles. That flag is what makes esp_input() call skb_cow_data() instead of decrypting in place, so a later local ESP delivery can decrypt over frags the skb does not own privately. Leave error reporting to the callers. | ||||
| CVE-2026-90022 | 1 Linux | 1 Linux Kernel | 2026-09-18 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_midi2: fix use-after-free in string attribute show path f_midi2_opts_str_show() takes the string lock internally, but its callers dereference the opts->info.<field> pointer before calling it, outside the lock. This races with f_midi2_opts_str_store(), which frees the old string under opts->lock when the attribute is written concurrently, the show path can read a pointer that gets freed before the lock inside str_show() is even taken. Change f_midi2_opts_str_show() to take a pointer to the string field, matching the existing pattern in f_midi2_opts_str_store(), and dereference it only after the lock is held. Update all three callers (iface_name, block name, and the EP string option macro) accordingly. | ||||
| CVE-2026-90026 | 1 Linux | 1 Linux Kernel | 2026-09-18 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: usb: typec: qcom-pmic: cancel reset_work on stop pdphy_stop() disables IRQs but leaves reset_work pending. If the IRQ handler schedules it just before disable_irq(), the work runs after remove() frees the struct via devm. Call cancel_work_sync() after disabling IRQs to close the window. This issue was found by an in-house static analysis tool. | ||||
| CVE-2026-90032 | 1 Linux | 1 Linux Kernel | 2026-09-18 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: media: usbtv: keep device alive while ALSA card exists The ALSA PCM callbacks store the driver state in pcm->private_data. An open PCM file can outlive USB disconnect because usbtv_audio_free() uses snd_card_free_when_closed(). The disconnect path can then drop the V4L2 device reference and free struct usbtv before ALSA releases the substream, so a later close dereferences freed memory in snd_usbtv_pcm_close(). Take a V4L2 device reference for the ALSA card and drop it from the card private_free callback. This keeps struct usbtv valid until ALSA has closed the remaining files and freed the card. | ||||
| CVE-2026-90041 | 1 Linux | 1 Linux Kernel | 2026-09-18 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: HID: sony: clean up device list on probe failure sony_input_configured() adds some controllers to sony_device_list before HID core registers their input devices. input_register_device() can fail after the callback returns successfully. sony_probe() then observes that HID_CLAIMED_INPUT is clear and unwinds, but only stops the HID hardware. The devres-managed sony_sc is freed while its list node remains linked, so the next matching controller traverses freed memory. Initialize the list node and device ID to inactive states. Make list removal idempotent and run the driver-private cleanup on every probe failure path. This also makes a second cleanup safe when sony_input_configured() already unwound a partial initialization before sony_probe() handles the missing input claim. Found by 0sec (https://0sec.ai) using automated source analysis; verified against the HID input registration and probe unwind paths. | ||||
| CVE-2026-90044 | 1 Linux | 1 Linux Kernel | 2026-09-18 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_fs: Fix Use-After-Free in AIO error path In ffs_epfile_write_iter() and ffs_epfile_read_iter(), when ffs_epfile_io() fails with an error other than -EIOCBQUEUED, the io_data structure (`p`) is freed. However, for AIO operations, the kiocb cancel function was already armed and kiocb->private was set to `p`. If a concurrent cancel operation (such as sys_io_cancel()) executes after ffs_epfile_io() fails but before the function frees `p`, a Use-After-Free can occur when the cancellation handler accesses the freed pointer. To securely fix this race condition, we must properly un-arm the cancellation. Invoking `kiocb->ki_complete()` does exactly this by acquiring `ctx->ctx_lock` and safely removing the kiocb from the active sequence. In doing so, it ensures that a parallel io_cancel can no longer discover the kiocb, effectively closing the race window. We then return -EIOCBQUEUED to notify the VFS layer that the kiocb has been consumed and it should avoid attempting to complete the request again or triggering subsequent completion handlers. | ||||
| CVE-2026-90001 | 1 Linux | 1 Linux Kernel | 2026-09-18 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: HID: bpf: serialize device reference release in struct_ops destroy path __hid_bpf_ops_destroy_device() and hid_bpf_unreg() can race on the same registration reference, double-putting struct hid_device and freeing it while hid_destroy_device() still uses it. Serialize the remove/NULL decision under hdev->bpf.prog_list_lock so exactly one path releases each registration reference: unreg re-checks ops->hdev under the lock and returns without putting when the destroy path already cleared it; all put_device() calls happen after the lock is dropped, which is safe because a concurrent unreg then observes ops->hdev == NULL under the lock. Background: each successful attach (hid_bpf_ops_reg) acquires one device reference (hid_get_device()). Two paths can release it: - device destruction: hid_destroy_device() -> hid_bpf_destroy_device() -> __hid_bpf_ops_destroy_device(), which walks hdev->bpf.prog_list under rcu_read_lock() and drops one reference per attached program; - BPF link release: bpf map delete (no BPF_F_LINK) synchronously calls st_ops->unreg() -> hid_bpf_unreg(), which drops the reference for its own registration. The coordination handshake (e->hdev = NULL on the destroy side vs "if (!hdev) return" on the unreg side) is a TOCTOU check: the two paths run under different lock domains (rcu_read_lock vs prog_list_lock), so a concurrent unreg can read ops->hdev as non-NULL, block on prog_list_lock, and then proceed while the destroy traversal executes - both paths then drop the same reference. The refcount reaches zero legitimately (each decrement is individually valid), so no refcount_t saturation fires: the device is simply freed while the transport is still inside hid_destroy_device(), and subsequent teardown touches freed memory. The fix serializes the remove/NULL decision under prog_list_lock on both sides and moves the destroy-side puts outside the lock. With the lock held, plain reads/writes of ops->hdev are sufficient; no READ_ONCE/WRITE_ONCE are added, keeping the patch minimal. Unlocked-read safety: the unlocked read of ops->hdev at the top of hid_bpf_unreg() cannot touch a freed device, because the unreg path itself still holds this registration's reference (released only by its own hid_put_device() after the lock is dropped), and a destroy traversal that already cleared ops->hdev makes the lock-internal re-check return early without any put. At most one of the two paths releases each registration reference. | ||||
| CVE-2026-90014 | 1 Linux | 1 Linux Kernel | 2026-09-18 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: tracing: Have show_event_filters/triggers files take trace array ref The newly added files show_event_filters and show_event_triggers that show all filters or triggers that are set within the trace array do not take a reference for the trace array it is showing. Without taking a reference, the trace_array may be freed via "rmdir" while a task is reading one of theses files. Those files iterate all the events within an instance (trace_array) and nothing prevents that instance from being freed while its data is being read. This causes a use-after-free crash. Have the open of both those files take the trace_array reference via the trace_array_get() that prevents the trace_array from being freed while the files are opened. | ||||
| CVE-2026-90037 | 1 Linux | 1 Linux Kernel | 2026-09-18 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: NFSD: Prevent client use-after-free during close_lru reaping An nfs4_openowner left on nn->close_lru after its final CLOSE keeps its last closed stateid in oo_last_closed_stid, holding only a raw pointer to its nfs4_client. The laundromat reaps timed-out entries, drops nn->client_lock, and calls nfs4_put_stid(), which dereferences the client through cl_lock. Nothing pins the client across that window, so a concurrent force_expire_client() can free it and nfs4_put_stid() reads freed memory. __destroy_client() hits the same race, walking clp->cl_openowners without cl_lock. Pin the client with cl_rpc_users before dropping client_lock, and skip clients already expiring. __destroy_client() then cleans up its own close_lru entries through release_last_closed_stateid(), so teardown no longer races the laundromat. | ||||
| CVE-2026-90045 | 1 Linux | 1 Linux Kernel | 2026-09-18 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: USB: gadget: ffs: fix mm lifetime handling io_data stores a pointer to the submitting task's mm_struct, but does not currently hold a reference to it while async requests are pending. This can result in a use-after-free if the task exits before completion handling finishes. Take a reference with mmgrab() when queuing the read request and release it with mmdrop() on request completion. | ||||
| CVE-2026-89960 | 1 Linux | 1 Linux Kernel | 2026-09-18 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: s390/vfio-ap: fix stale pqap_hook pointer on error in vfio_ap_mdev_set_kvm() In vfio_ap_mdev_set_kvm(), kvm->arch.crypto.pqap_hook is set to &matrix_mdev->pqap_hook before the update locks are acquired and the mdev list is checked for a conflicting assignment. If another mdev is already attached to the same KVM instance, the function returns -EPERM without restoring the hook pointer, leaving kvm->arch.crypto.pqap_hook pointing at the failing matrix_mdev instead of the mdev that legitimately owns the KVM. Since matrix_mdev->kvm is never set on this error path, vfio_ap_mdev_unset_kvm() will not clean up the hook when matrix_mdev is later closed. If matrix_mdev is subsequently freed, any PQAP instruction executed by the guest will dereference the stale pointer through pqap_hook_rwsem, resulting in a use-after-free. Since kvm->arch.crypto.pqap_hook is only set in the vfio_ap_mdev_set_kvm() function and is cleared in the vfio_ap_mdev_unset_kvm() function, a check for 'kvm->arch.crypto.pqap_hook != NULL' is all that is needed to determine whether it belongs to another mdev. This will alleviate the need to iterate the matrix_dev->mdev_list list to see if the kvm object is assigned to another mdev.This was introduced in v3 to alleviate the need to take the mdevs_lock while iterating the list; however, this did not prevent a potential race condition. The pqap_hook_rwsem(write) is now performed inside get_update_locks_for_kvm(), which is updated to acquire pqap_hook_rwsem(write) between kvm->lock and mdevs_lock. This ordering is consistent with the PQAP intercept path, which acquires pqap_hook_rwsem in read mode while srcu is held under vcpu->mutex, establishing the dependency: kvm->lock -> vcpu->mutex -> srcu -> pqap_hook_rwsem(read). The pqap_hook_rwsem is now released inside the release_update_locks_for_kvm(), which is updated to release pqap_hook_rwsem(write) between mdevs_lock and kvm->lock. Additionally, kvm_put_kvm() in vfio_ap_mdev_unset_kvm() is moved after release_update_locks_for_kvm(). Previously it was called while kvm->lock was held; if it were ever the last reference, kvm_destroy_vm() would run under kvm->lock, which would deadlock. | ||||
| CVE-2026-89970 | 1 Linux | 1 Linux Kernel | 2026-09-18 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: nvmet-auth: Synchronize timeout work during SQ teardown nvmet_auth_sq_free() cancels auth_expired_work with cancel_delayed_work(). If the work has already started, cancellation does not wait for the callback. Transport teardown can consequently free or reuse the queue containing struct nvmet_sq while nvmet_auth_expired_work() still accesses that SQ. Add a teardown-specific helper that synchronously drains the delayed work before freeing authentication state, and use it from nvmet_sq_destroy(). Keep the non-synchronous helper for in-band authentication state cleanup, where the SQ owner remains alive. | ||||
| CVE-2026-89899 | 1 Linux | 1 Linux Kernel | 2026-09-18 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: media: cec: disable delayed work before freeing an interrupted transmit cec_transmit_msg_fh() drops adap->lock to wait for a blocking transmit in wait_for_completion_killable(). If that wait is interrupted by a signal, cancel_delayed_work_sync() can run before the CEC kthread arms the reply timeout via schedule_delayed_work(&data->work) in cec_transmit_done_ts(). The work is then armed after the cancel, and the data is freed with its delayed_work still pending: ODEBUG: free active (active state 0) object: ... hint: cec_wait_timeout Use disable_delayed_work_sync(): it cancels the work and disables it, so the later schedule_delayed_work() becomes a no-op and the work cannot be re-armed. The data is freed right after, so it need not be re-enabled. | ||||
| CVE-2026-89990 | 1 Linux | 1 Linux Kernel | 2026-09-18 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: ceph: lock mutex in ceph_mds_check_access() MDS session OPEN handling replaces mdsc->s_cap_auths under mdsc->mutex, freeing the previous array and its strings. ceph_mds_check_access() traverses this array without holding the mutex. A concurrent session reopen can therefore free the array while it is being inspected, resulting in a use-after-free like this: Unable to handle kernel paging request at virtual address 003aaad64b2c8bb9 [...] Internal error: Oops: 0000000096000004 [#1] SMP Modules linked in: CPU: 56 UID: 2953037534 PID: 1253231 Comm: php-cgi8.4 Not tainted 6.18.45-i2-ampere #1146 NONE [..] pc : ceph_mds_check_access+0xd4/0x550 lr : ceph_mds_check_access+0xc8/0x550 [...] Call trace: ceph_mds_check_access+0xd4/0x550 (P) ceph_atomic_open+0x138/0xbe8 path_openat+0xa24/0xfa8 do_filp_open+0x94/0x158 do_sys_openat2+0x88/0xf8 | ||||