Export limit exceeded: 399238 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (399238 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-98023 | 1 Linux | 1 Linux Kernel | 2026-09-26 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: vxlan: reject dynamic fdb entries that reference a nexthop id The commit cited in the Fixes tag allowed VXLAN FDB entries to point to FDB nexthops so that overlay traffic could be load balanced across multiple VTEPs. Such entries can only be configured from user space, cannot be learned and cannot roam. They only make sense with a user space control plane such as E-VPN where data plane learning is disabled. Despite that, the VXLAN driver does not currently prevent such entries from being configured with the "dynamic" flag. The per-nexthop FDB list is only protected by the per-device hash lock, which is not sufficient when two VXLAN devices point to the same FDB nexthop and therefore share the list. Aging runs in softirq context without RTNL, so an entry deleted by one device can race with an addition or deletion from the other, leading to list corruption: list_del corruption. next->prev should be ffff8881069d9548, but was dead000000000122. (next=ffff8881069d9448) WARNING: CPU: 0 PID: 90 at lib/list_debug.c:65 __list_del_entry_valid_or_report+0x1aa/0x210 ... vxlan_fdb_destroy+0x5b8/0xad0 vxlan_cleanup+0x328/0x450 call_timer_fn+0x2a/0x1c0 run_timer_softirq+0x18c/0x210 BUG: KASAN: slab-use-after-free in vxlan_fdb_destroy Fix this by rejecting the bogus configuration of dynamic FDB entries that point to FDB nexthops, both when created and when an existing entry is updated. As such, the per-nexthop FDB list is only ever mutated under the RTNL lock. Add test cases to make sure that this does not regress in the future. | ||||
| CVE-2026-98024 | 1 Linux | 1 Linux Kernel | 2026-09-26 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: s390/ism: folio_put() after error dmb->cpu_addr was allocated via folio_alloc(). Use folio_put() instead of kfree() in the error exit of ism_alloc_dmb() to avoid slab allocator corruption. While at it, reset dmb->cpu_addr after folio_put to avoid unintentional UAF by future callers. | ||||
| CVE-2026-63386 | 1 Sunnyadn | 1 Js-toml | 2026-09-26 | 5.3 Medium |
| js-toml is a TOML parser for JavaScript. Prior to 1.1.3, load() does not bound nesting or dotted-key depth in the recursive parser at src/load/parser.ts or the interpreter at src/load/interpreter.ts, so deeply nested arrays, deeply nested inline tables, or long dotted keys can exhaust the V8 call stack and throw a raw RangeError instead of the documented SyntaxParseError. Applications that parse attacker-controlled TOML and handle only SyntaxParseError can rethrow the unexpected exception, which can terminate a worker or process and cause denial of service. The exception is synchronous and catchable by consumers that handle all exceptions, and the issue does not affect confidentiality or integrity. This issue is fixed in version 1.1.3. | ||||
| CVE-2026-75745 | 1 Adobe | 2 Aem 6.5 Forms Jee, Aem 6.5 Lts Forms Jee | 2026-09-26 | 10 Critical |
| Adobe Experience Manager Forms JEE is affected by an Incorrect Authorization vulnerability that could result in arbitrary code execution in the context of the current user. An attacker could exploit this vulnerability to execute arbitrary code. Exploitation of this issue does not require user interaction. Scope is changed. | ||||
| CVE-2026-75689 | 3 Adobe, Apple, Microsoft | 6 Adobe Connect, Adobe Connect Android Mobile App, Connect and 3 more | 2026-09-26 | 9.3 Critical |
| Adobe Connect is affected by a stored Cross-Site Scripting (XSS) vulnerability that could be abused by an attacker to inject malicious scripts into vulnerable form fields. Malicious JavaScript may be executed in a victim's browser when they browse to the page containing the vulnerable field, potentially gaining elevated access or control over the victim's account or session. Scope is changed. | ||||
| CVE-2026-75638 | 1 Adobe | 2 Content Credentials Command-line Tool, Content Credentials Rust Sdk | 2026-09-26 | 6.5 Medium |
| CAI Content Credentials is affected by an Improper Input Validation vulnerability that could result in a Security feature bypass. An attacker could leverage this vulnerability to bypass security measures and gain unauthorized write access. Exploitation of this issue requires user interaction in that a victim must visit a maliciously crafted URL or interact with a compromised web page. | ||||
| CVE-2026-84396 | 1 Adobe | 1 Indesign Desktop | 2026-09-26 | 5.5 Medium |
| InDesign Desktop is affected by a NULL Pointer Dereference vulnerability that could result in an application denial-of-service. An attacker could exploit this vulnerability to crash the application, leading to a denial-of-service condition. Exploitation of this issue requires user interaction in that a victim must open a malicious file. | ||||
| CVE-2026-97558 | 1 Linux | 1 Linux Kernel | 2026-09-26 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: fix cifsFileInfo reference leak in deferred close When cifs_close() defers a close, it hands the cifsFileInfo reference of the closing struct file to the queued work. Each execution of smb2_deferred_work_close() drops one such reference. deferred_close_scheduled can be false while the work is pending: the workqueue clears PENDING when the callback starts to run, before the callback clears the flag under deferred_lock. A close in that interval requeues the running work, and the callback then clears the flag, leaving the requeued work pending with the flag down. A later cifs_open() can reuse the handle and its cifs_close() reaches the same branch: queue_delayed_work() fails because the work is still pending, but cifs_close() returns without dropping the closing file's reference. The cifsFileInfo count stays pinned and its tlink, dentry and server handle are leaked. Check the return value and hand off the reference only when work was actually queued. Otherwise, use the shared _cifsFileInfo_put(), like the mod_delayed_work() branch above: the pending execution already owns its reference. This issue was found by an in-house static analysis tool. | ||||
| CVE-2026-97577 | 1 Linux | 1 Linux Kernel | 2026-09-26 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: media: verisilicon: rockchip: reject AV1 frames exceeding the tile capacity rockchip_vpu981_av1_dec_set_tile_info() indexes the tile group entry array by tile1 * tile_cols + tile0, reading up to tile_cols * tile_rows entries, lays out one descriptor per tile in the AV1_MAX_TILES tile_info buffer, and programs the real tile_cols / tile_rows into the hardware. The tile group entry control is a dynamic array sized to the number of entries userspace submitted, independent of tile_cols / tile_rows, so a frame that claims more tiles than entries reads past the array. A frame that claims more than AV1_MAX_TILES tiles also leaves the hardware programmed for more tiles than the descriptor buffer holds. Reject both in prepare_run(): tile_cols * tile_rows must not exceed the submitted entry count or AV1_MAX_TILES. The entry count is read via v4l2_ctrl_find() (ctrl->elems). This mirrors the bound the mediatek AV1 decoder already enforces. | ||||
| CVE-2026-97595 | 1 Linux | 1 Linux Kernel | 2026-09-26 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: mac802154: fix use-after-free of sdata via queued RX frames The RX softirq producer ieee802154_subif_frame() queues received beacon and MAC-command frames onto local->rx_beacon_list / rx_mac_cmd_list and schedules a process-context worker, storing a raw mac_pkt->sdata (and skb->dev == sdata->dev) with neither a reference nor any locking: - the lists have no lock: the softirq producer list_add_tail()s while the mac_wq worker list_del()s, so sibling interfaces on the same phy corrupt the list; - the workers dereference the interface after it may have been freed. mac802154_rx_mac_cmd_worker() touches mac_pkt->sdata directly, and mac802154_rx_beacon_worker() -> mac802154_process_beacon() dereferences skb->dev (== sdata->dev). Removing an interface frees its sdata (netdev_priv) while a queued frame still points at it, so a later worker run is a use-after-free. Reproduced under KASAN by flooding a victim interface with MAC command frames and removing it (the beacon path is the same class via skb->dev): BUG: KASAN: slab-use-after-free in mac802154_rx_mac_cmd_worker+0x463/0x630 [mac802154] Read of size 4 at addr ffff888002f9ea18 by task kworker/u8:1/31 Workqueue: phy0-mac-cmds mac802154_rx_mac_cmd_worker [mac802154] Call Trace: mac802154_rx_mac_cmd_worker+0x463/0x630 [mac802154] process_one_work+0x611/0xe80 worker_thread+0x52e/0xdc0 kthread+0x30c/0x630 ret_from_fork+0x2fd/0x3e0 Fix both lists together: - add local->rx_lock and take it around every list access: the softirq producer (plain spin_lock, softirq context) and the workers and flush (spin_lock_bh, process context); - pin the interface for the lifetime of a queued frame with netdev_hold()/netdev_put(), so the worker can safely dereference sdata / skb->dev even while the interface is being removed; - dequeue under the lock at the head and loop-drain the whole list in the workers (they previously processed one frame per run and relied on a later enqueue to drain the rest); - drop not-yet-started frames of an interface before it is unregistered, from ieee802154_if_remove() (after the RCU grace period) and from the ieee802154_remove_interfaces() loop -- the latter is the whole-phy teardown path, which does not go through ieee802154_if_remove(). An in-flight worker that already dequeued a frame keeps its own netdev reference; unregister_netdevice() then waits it out in netdev_run_todo(), which runs at rtnl_unlock() (rtnl released) and after the interface has been closed, so it does not pin rtnl. A worker blocked in an association TX only delays that one interface's unregister (the usual "waiting for %s to become free"), it does not hold rtnl. netdev_hold() is used for this reason instead of a cancel_work_sync() under rtnl, which would block on the worker's unbounded MLME TX wait via ieee802154_sync_queue(). The mac-command worker additionally skips processing for a stopped interface (ieee802154_sdata_running()), avoiding a needless association response during teardown. | ||||
| CVE-2026-97911 | 1 Linux | 1 Linux Kernel | 2026-09-26 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: accel: ethosu: Ensure SRAM region size matches job It is possible for userspace to set the job SRAM size to 0, but then still have SRAM accesses in the command stream. When the job SRAM size is 0, setting the region base register is skipped and a stale base address from a prior job is used. Check the region size against the job's SRAM size instead of just the size of the SRAM. The job's SRAM size was already checked against the total SRAM size. | ||||
| CVE-2026-97544 | 1 Linux | 1 Linux Kernel | 2026-09-26 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: xfs: don't leak dqacct if rhashtable insertion fails LOLLM observes that xqcheck_mod_live_ino_dqtrx doesn't free the newly allocated dqa object if rhashtable insertion fails. Fix this leak. | ||||
| CVE-2026-92608 | 1 Apache | 1 Qpid Broker-j | 2026-09-25 | 7.5 High |
| Improper handling of property-encoding exceptions in AMQP 1.0-to-AMQP 0-10 message conversion allows authenticated message producers to disrupt delivery to AMQP 0-10 consumers via message properties that the target encoder does not handle correctly. This issue affects Apache Qpid Broker-J: through 10.1.0. Users are recommended to upgrade to version 10.1.1, which fixes the issue. | ||||
| CVE-2026-97522 | 1 Linux | 1 Linux Kernel | 2026-09-25 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mptcp: fix bad accounting in __mptcp_subflow_push_pending() If __subflow_push_pending() errors out we should avoid updating the copied byte counters, to avoid mismatch push call later on. | ||||
| CVE-2026-97523 | 1 Linux | 1 Linux Kernel | 2026-09-25 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: mptcp: close race between scheduler and state change The mptcp scheduler may race with subflow sockets state change: data transmission on the selected socket may fail and a later release could try to use mss_now reset to 0 for a divide operation. Address the issue by explicitly checking for the critical scenario. | ||||
| CVE-2026-97525 | 1 Linux | 1 Linux Kernel | 2026-09-25 | 8.2 High |
| In the Linux kernel, the following vulnerability has been resolved: x86/mm/pat: Allocate split page tables as kernel page tables A PTE is allocated directly without going through the standard page table allocation routines (such as pte_alloc_one_kernel()) when the CPA code splits a large page (__split_large_page()). This means the page table constructor is never called nor is the page table marked as a kernel page table. The former results in the folio associated with the page table not being marked as a page table (__pagetable_ctor() is never called thus neither is __folio_set_pgtable()) nor are statistics updated to reflect it (lruvec_stat_add_folio() is never called). The latter issue of failing to mark the page table as a kernel page table (ptdesc_set_kernel() is never called) is far more problematic. Since commit: 5ba2f0a15564 ("mm: introduce deferred freeing for kernel page tables") kernel page table freeing has been batched and since the subsequent commit: e37d5a2d60a3 ("iommu/sva: invalidate stale IOTLB entries for kernel address space") IOTLB cache entries for kernel page tables have been invalidated upon being freed. Since split page tables are freed without this invalidation, the IOTLB can contain stale entries for them. Resolve the issue by using the ordinary PTE allocation API at split time. This results in these kernel page tables invoking a page table constructor, and thus requires a page table destructor. Destructors are not always present, like for early allocated direct map page tables). Conditionally call pagetable_dtor_free() if the PG_table folio flag for the ptdesc is set, otherwise we free the page table via pagetable_free(). Regardless of which path is taken page tables marked as kernel page tables, which now includes split page tables, take the correct route through pagetable_free_kernel(). There is a user-visible side effect in that split page tables will appear in nr_page_table_pages in /proc/vmstat (as do other kernel page tables allocated after early boot), however this is a positive change. This issue started being markedly problematic after commit: 5ba2f0a15564 ("mm: introduce deferred freeing for kernel page tables") so choose this as the Fixes target. [ dhansen: rephrase in imperative mood ] | ||||
| CVE-2026-97528 | 1 Linux | 1 Linux Kernel | 2026-09-25 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Unlink NVMe unsol ctx before freeing on LS reject error qla_nvme_xmt_ls_rsp() obtains uctx, which was linked into fcport->unsol_ctx_head by qla2xxx_process_purls_iocb() and is still linked when the NVMe transport calls back to transmit the LS response. On the error (out:) path the function frees uctx with kfree() but never removes it from the list. This leaves a freed node in fcport->unsol_ctx_head: the next list_add_tail() for that fcport writes through the freed node, and a subsequent list_del() can corrupt the list or panic. Unlink uctx with list_del() before kfree() on the error path, matching the other free sites in qla_nvme_release_lsrsp_cmd_kref() and qla2xxx_process_purls_pkt(). qla2x00_rel_sp() in the failure path only returns the SRB to its pool and does not invoke sp->put_fn, so the out: path is the sole free and uctx is always still linked there. | ||||
| CVE-2026-97529 | 1 Linux | 1 Linux Kernel | 2026-09-25 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Validate BSG request_len before reading vendor_cmd[] The FC BSG transport allocates job->request via memdup_user() using the exact user-supplied request_len. For FC_BSG_HST_VENDOR, fc_bsg_host_dispatch() only guarantees request_len covers msgcode and vendor_id; it does not account for the vendor_cmd[] flexible array. qla2xxx then reads the command selector vendor_cmd[0] and, in several sub-handlers, vendor_cmd[1]/[2] or structures overlaid on the vendor command area without verifying request_len. A caller holding CAP_SYS_RAWIO can submit a short request whose vendor_id matches the host, triggering out-of-bounds heap reads (KASAN-detectable, and able to mis-select a command or panic). Add a central guard in qla2x00_process_vendor_specific() so the selector is always in bounds, restrict the early vendor_cmd[0] read in qla24xx_bsg_request() to sufficiently long vendor messages, and add request_len checks to the sub-handlers that read further: qla24xx_proc_fcp_prio_cfg_cmd(), qla2x00_process_loopback(), qla84xx_reset(), qla84xx_updatefw(), qla2x00_read_optrom(), qla2x00_update_optrom(), qlafx00_mgmt_cmd() and qla28xx_validate_flash_image(). | ||||
| CVE-2026-97536 | 1 Linux | 1 Linux Kernel | 2026-09-25 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Fix use-after-free of qpair work on queue teardown The response queue MSI-X handler qla2xxx_msix_rsp_q() schedules qla_do_work() via queue_work(ha->wq, &qpair->q_work). qla_do_work() dereferences the qpair (vha, rsp) and takes qpair->qp_lock. During teardown, qla2xxx_delete_qpair() deletes the response queue, which calls free_irq() in qla25xx_free_rsp_que(), and then frees the queue and the qpair. free_irq() waits for running hardirq handlers but does not cancel work already placed on ha->wq. A still-pending q_work then runs qla_do_work() against the freed qpair and response queue, causing a use-after-free. This is especially likely during full adapter teardown, where destroy_workqueue(ha->wq) forces pending work to run after the queue pairs have been freed. Flush the work item with cancel_work_sync() in qla25xx_free_rsp_que() after free_irq() has released the interrupt (so no new work can be queued) and before the response queue and qpair memory are freed (so the flushed handler still sees valid memory). Guard on rsp->qpair and ha->wq to match the INIT_WORK() condition and avoid operating on an uninitialized work_struct. | ||||
| CVE-2026-97543 | 1 Linux | 1 Linux Kernel | 2026-09-25 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: xfs: destroy seen inode bitmap when we fail to add a dirpath LOLLM observes a memory leak in xchk_dirtree_create_path if we create the directory path object but appending the name to the path fails. When this happens, we don't tear down the (empty) seen inode bitmap. This is a pretty trivial error, but let's not leave logic bombs. Do the same for a similar bug in xrep_dirtree_create_adoption_path. | ||||