Export limit exceeded: 11637 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (11637 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-88900 | 1 Apache | 2 Apache Camel, Camel | 2026-11-03 | 8.8 High |
| Deserialization of Untrusted Data vulnerability in Apache Camel Camel-Jgroups component. This issue affects Apache Camel: from 4.0.0 before 4.18.5, from 4.19.0 before 4.22.1. JGroupsEndpoint.createExchange(Message), which CamelJGroupsReceiver calls for every message the jgroups consumer receives before the exchange is routed, set the exchange body from org.jgroups.Message.getObject(). For an ObjectMessage, which is the message type the Camel jgroups producer sends, JGroups Java-deserializes the payload through an ObjectInputStream on its own receive thread as the message arrives, and getObject() returns the resulting object. No java.io.ObjectInputFilter was applied on that path unless the deployment had set a JVM-wide serialization filter: camel-jgroups installed none, and the JGroups versions shipped with the affected releases apply none of their own, so any serializable class on the application classpath could be instantiated and its deserialization callbacks run. Unless a channel or the channelProperties option is configured, the consumer creates its channel with new JChannel(), the stock JGroups protocol stack, which multicasts over UDP without the AUTH protocol and without encryption, so any host able to reach the cluster's multicast group or bind port can join the cluster and send messages to the consumer without credentials. Such a host could send a crafted serialized object that leads to remote code execution in the Camel process when a usable deserialization gadget chain is present on the classpath, and no non-default option was required on the consumer. Because JGroups materializes the object before Camel's receiver runs, a check performed by Camel can only inspect the deserialized result and cannot stop code that runs during deserialization, so closing the issue also requires a control that applies before the payload is read, as described in the mitigation. Exploitation requires network access to the cluster's multicast group or bind port, which with the default UDP multicast transport means a host on an adjacent network, and a usable gadget chain on the classpath, which is why the severity is assessed as high rather than critical. Users are recommended to upgrade to version 4.23.0, which fixes the issue. If users are on the 4.22.x releases stream, then they are suggested to upgrade to 4.22.1. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.5. The 4.14.x releases stream and earlier, and the 4.15.x to 4.17.x and 4.19.x to 4.21.x release lines, reached end of life before this issue was resolved and will not receive a fix, so deployments on those lines must move to a supported release. | ||||
| CVE-2026-119977 | 1 Wordpress Foundation | 1 Wordpress | 2026-11-03 | 8.1 High |
| WordPress Core is vulnerable to Remote Code Execution in versions 4.7 through 7.1.3. This is due to predictable, web-accessible staging paths used during full-package core upgrades. This makes it possible for unauthenticated attackers to execute code on the server during the upgrade window. | ||||
| CVE-2026-121602 | 2026-11-03 | 6.5 Medium | ||
| Solanum before commit 2ce64de contains a heap-based buffer overflow vulnerability that allows a malicious linked server to corrupt memory by sending overlong channel names in JOIN or SJOIN messages. Attackers controlling a peer server can trigger strcpy and sprintf overflows in ms_join and ms_sjoin to crash the ircd or potentially achieve remote code execution. | ||||
| CVE-2026-121428 | 1 Azuracast | 1 Azuracast | 2026-11-03 | 8.8 High |
| AzuraCast through 0.23.8 contains a remote code execution vulnerability that allows authenticated station managers to inject Supervisor configuration through the station timezone field. Attackers can submit a timezone containing newlines to the profile edit API, defining a new Supervisor program that executes OS commands as root when configuration regenerates. | ||||
| CVE-2026-102435 | 2026-11-03 | 9.8 Critical | ||
| The Ultra Addons for Contact Form 7 plugin for WordPress is vulnerable to arbitrary file deletion due to insufficient file path validation in the _getObjAttr function in all versions up to, and including, 3.5.54. This makes it possible for unauthenticated attackers to delete arbitrary files on the server, which can easily lead to remote code execution when the right file is deleted (such as wp-config.php). This requires the PDF Generator add-on to be active and a Contact Form 7 form to be configured for PDF generation, as the WPCF7_Submission POP gadget chain relies on CF7 being present to complete the file deletion via __destruct(). Note: This vulnerability can only be exploited when the PDF generator feature is enabled. | ||||
| CVE-2014-125001 | 1 Cardosystems | 2 Scala Rider Q3, Scala Rider Q3 Firmware | 2026-11-03 | 8.1 High |
| A vulnerability classified as critical has been found in Cardo Systems Scala Rider Q3. Affected is the file /cardo/api of the Cardo-Updater. Unauthenticated remote code execution with root permissions is possible. Firewalling or disabling the service is recommended. | ||||
| CVE-2026-28335 | 1 Solarwinds | 1 Dameware | 2026-11-03 | 8.4 High |
| SolarWinds Dameware was found to be affected by a buffer overflow vulnerability that can result in remote code execution. Authentication is required. | ||||
| CVE-2026-121603 | 2026-11-03 | 6.5 Medium | ||
| Solanum before commit 2ea1382 contains a buffer overflow vulnerability in ms_kill() that allows malicious linked servers to corrupt memory by sending an overlong kill reason. Attackers controlling a rogue or compromised peer server can send a reason exceeding KILLLEN that overflows a static 512-byte buffer, crashing the ircd or potentially achieving remote code execution. | ||||
| CVE-2026-77880 | 2 Control-webpanel, Control Web Panel | 2 Webpanel, Control Web Panel | 2026-11-03 | 7.8 High |
| Control Web Panel (CWP) before webpanel_version 1.16 contains an OS command injection vulnerability in the loopback API password change route /newpass/, which runs as root. An attacker can inject arbitrary OS commands by manipulating the POST 'user' parameter that is passed unescaped into a shell command, achieving remote code execution with root privileges. | ||||
| CVE-2026-63201 | 1 Cesnet | 1 Netopeer2 | 2026-11-03 | N/A |
| Netopeer2 is a server for implementing network configuration management based on the `NETCONF` Protocol. In affected versions, a low-privileged authenticated `NETCONF` user can remotely crash `netopeer2-server` by sending a `get RPC` with an invalid `subtree filter` whose text contains format specifiers. In `src/netconf.c`, `np2srv_rpc_get_cb()` sends the invalid value through `ERR()` to `np2log_printf()`, where `vsnprintf()` first formats the message safely. In `src/log.c`, that already formatted buffer is subsequently passed to `np2log()` as the format string itself, causing `vsyslog()` to interpret attacker-controlled percent sequences and read invalid pointer arguments. The reported denial of service was confirmed on version 2.8.7 using `NETCONF`-over-SSH and AddressSanitizer; reliable remote code execution was not confirmed. `The advisory identifies 2.8.8 as patched`; repository comparisons verify the fix in public release 2.8.21. The affected/fixed boundary remains unresolved because no public 2.8.8 tag was located, which does not establish the status of an untagged 2.8.8 build. | ||||
| CVE-2026-29508 | 1 Readymedia Project | 1 Readymedia | 2026-11-03 | 8.8 High |
| ReadyMedia (formerly MiniDLNA) versions 1.3.0 through 1.3.3 contain a stack-based buffer overflow vulnerability that allows remote attackers to corrupt stack memory by crafting a malicious DFF audio file with an oversized PROP chunk size value that is used unvalidated to allocate a variable-length stack array and read file data into it. Attackers can place a crafted DFF file in a directory monitored by ReadyMedia to trigger automatic parsing via inotify, achieving remote code execution on unprotected builds or denial of service on hardened builds with stack protections. | ||||
| CVE-2026-16306 | 1 Infinitt Healthcare | 1 System Manager | 2026-11-03 | N/A |
| Remote Code Execution in the `IModular.exe` URI handler in INFINITT Healthcare Co., Ltd. INFINITT PACS allows a remote unauthenticated attacker to invoke unintended application functionality and potentially execute arbitrary code via a crafted `imodular:// URI` containing attacker-controlled command and argument parameters. | ||||
| CVE-2026-78162 | 1 Apache | 2 Apache Camel, Camel | 2026-11-03 | 9.8 Critical |
| Deserialization of Untrusted Data vulnerability in Apache Camel. This issue affects Apache Camel: from 4.0.0 before 4.18.5, from 4.19.0 before 4.22.1. The camel-hazelcast component applies a default Hazelcast JavaSerializationFilterConfig to the instances it creates from its own configuration, a protection introduced by CVE-2026-43865. That change did not reach two of the configuration paths Camel builds itself, so those paths continued to create Hazelcast instances whose Java deserialization is unrestricted. ReplicatedHazelcastAggregationRepository extends HazelcastAggregationRepository but overrides doStart() without calling super.doStart(), keeping its own copy of the bootstrap block, and therefore never received the filter: a route using it without supplying a hazelcastInstance starts a Hazelcast member that deserializes values read from the backing ReplicatedMap with no class restriction. HazelcastDefaultComponent#getOrCreateHzClientInstance() builds its own ClientConfig when hazelcastMode=client is selected and neither a referenced ClientConfig nor hazelcastConfigUri is supplied, and likewise applied no filter, so client-mode endpoints behaved differently from node-mode endpoints for an otherwise identical configuration. In both cases an attacker able to publish into the Hazelcast cluster that the affected instance is attached to can cause a serialized Java object of their choosing to be deserialized inside Hazelcast's own serialization layer, before Camel processes the exchange, resulting in remote code execution. Hazelcast clusters have neither authentication nor TLS enabled by default. Selecting client mode is a topology choice rather than a security option, so neither path required the deployment to opt in to unsafe behaviour. Users are recommended to upgrade to version 4.23.0, which fixes the issue. If users are on the 4.22.x releases stream, then they are suggested to upgrade to 4.22.1. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.5. The 4.14.x releases stream and earlier reached end of life before this issue was resolved and will not receive a fix, so deployments on those lines must move to a supported release. For deployments that cannot upgrade immediately, supply an explicit Hazelcast configuration carrying a JavaSerializationFilterConfig, or inject a pre-built HazelcastInstance, since a user-supplied configuration is never overwritten by Camel. Alternatively set the JVM-wide filter -Djdk.serialFilter=!java.net.;java.;javax.;org.apache.camel.;!* and enable Hazelcast cluster authentication and TLS to restrict who can reach the cluster. | ||||
| CVE-2026-58256 | 1 Jeromedevome | 1 Grr | 2026-11-03 | 9.1 Critical |
| GRR is a resource management and reservation application. Prior to the advisory-reported fixed version 4.5.0, an administrator can inject malicious PHP through LDAP connector configuration parameters such as `ldap_filter`, poisoning `/personnalisation/config_ldap.inc.php` and permitting remote code execution. The administrator must first successfully connect to an LDAP server, which can be attacker-controlled, and then submit malicious input on the subsequent connector settings page. The advisory reports this issue as fixed in version 4.5.0. | ||||
| CVE-2026-76124 | 2026-11-03 | 8.8 High | ||
| The BuddyBoss App plugin for WordPress is vulnerable to Arbitrary File Upload in all versions up to, and including, 3.2.1 via the send_feedback function. This is due to insufficient file type validation that relies solely on the client-supplied Content-Type header without server-side content inspection or extension validation. This makes it possible for authenticated attackers, with subscriber-level access and above, to upload files that may be executable, which makes remote code execution possible. While uploaded files are deleted after email transmission, a race condition exists during SMTP execution that allows access to the file, and files persist indefinitely when wp_mail() fails. | ||||
| CVE-2026-120577 | 2026-11-03 | 8.1 High | ||
| The FluentCart A New Era of eCommerce – Faster, Lighter, and Simpler plugin for WordPress is vulnerable to arbitrary file deletion due to insufficient file path validation in the deleteFile function in all versions up to, and including, 1.6.2. This makes it possible for authenticated attackers, with custom-level access and above, to delete arbitrary files on the server, which can easily lead to remote code execution when the right file is deleted (such as wp-config.php). | ||||
| CVE-2026-120559 | 2026-11-03 | 7.5 High | ||
| The Contact Form Extender for Divi Builder plugin for WordPress is vulnerable to Arbitrary File Deletion due to insufficient file path validation in the cfefd_remove_uploaded_file() function in all versions up to, and including, 1.0.6. This makes it possible for unauthenticated attackers to delete arbitrary files on the server, which can easily lead to remote code execution when the right file is deleted (such as wp-config.php). The nonce protecting this AJAX action is rendered into the public page source via wp_localize_script and is therefore retrievable by any unauthenticated visitor. | ||||
| CVE-2026-120518 | 2026-11-03 | 9.1 Critical | ||
| The BuddyPress XProfile Image Field plugin for WordPress is vulnerable to arbitrary file deletion in all versions up to, and including, 3.1.0. This is due to bpxp_image_field_update_on_user_activation() calling unlink() on a path built from visitor-supplied signup metadata with no realpath() resolution, no containment check against the profile-image directory and no extension allow-list. Submitting a zero-byte file with the 'field_N_hidden' parameter during registration makes the plugin store the raw value, which is then resolved against the document root when the pending signup is activated. This makes it possible for unauthenticated attackers to delete arbitrary files on the server, which can easily lead to remote code execution when the right file (such as wp-config.php) is deleted. Requires open registration and an image-type profile field on the signup form. | ||||
| CVE-2023-29007 | 3 Fedoraproject, Git-scm, Redhat | 7 Fedora, Git, Enterprise Linux and 4 more | 2026-11-02 | 7 High |
| Git is a revision control system. Prior to versions 2.30.9, 2.31.8, 2.32.7, 2.33.8, 2.34.8, 2.35.8, 2.36.6, 2.37.7, 2.38.5, 2.39.3, and 2.40.1, a specially crafted `.gitmodules` file with submodule URLs that are longer than 1024 characters can used to exploit a bug in `config.c::git_config_copy_or_rename_section_in_file()`. This bug can be used to inject arbitrary configuration into a user's `$GIT_DIR/config` when attempting to remove the configuration section associated with that submodule. When the attacker injects configuration values which specify executables to run (such as `core.pager`, `core.editor`, `core.sshCommand`, etc.) this can lead to a remote code execution. A fix A fix is available in versions 2.30.9, 2.31.8, 2.32.7, 2.33.8, 2.34.8, 2.35.8, 2.36.6, 2.37.7, 2.38.5, 2.39.3, and 2.40.1. As a workaround, avoid running `git submodule deinit` on untrusted repositories or without prior inspection of any submodule sections in `$GIT_DIR/config`. | ||||
| CVE-2023-23384 | 1 Microsoft | 1 Sql Server | 2026-11-02 | 7.3 High |
| Microsoft SQL Server Remote Code Execution Vulnerability | ||||