| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
HID: rmi: fix OOB access with undersized RMI reports
The hid-rmi driver sizes its writeReport/readReport buffer purely from
the report descriptor supplied by the device, with no minimum bound:
data->input_report_size = hid_report_len(input_report);
data->output_report_size = hid_report_len(output_report);
alloc_size = data->output_report_size + data->input_report_size;
data->writeReport = devm_kzalloc(&hdev->dev, alloc_size, GFP_KERNEL);
data->readReport = data->writeReport + data->output_report_size;
but then reads and writes fixed offsets into it. A device declaring a
1-byte output and a 1-byte input report makes hid_report_len() return 2
for each, so alloc_size is 4, while rmi_set_page() -- reached
unconditionally at probe time through rmi_input_configured() -- stores
writeReport[4] and rmi_hid_read_block() stores writeReport[0..5]. Since
readReport lives at writeReport + output_report_size, those stores also
corrupt the window the next reply is parsed out of.
The read path is worse: the copy length comes from readReport[1], which
the device fills in and can be up to 255, and the copy starts at
&readReport[2] with no regard for input_report_size, so it runs past the
end of the allocation into adjacent slab objects. This does not even
need a lying device -- rmi_f01_probe() issues a fixed 21-byte register
read, so any device declaring an input report smaller than 23 bytes
reads out of bounds even when it answers truthfully. Those bytes become
the register values the RMI core acts on: rmi_f01_probe() prints them to
the kernel log as the product id and exports them through the mode 0444
sysfs attribute of the same name, and rmi_driver_set_irq_bits() sends
them back to the device as the interrupt mask, so an undersized report
descriptor leaks heap contents both to unprivileged userspace and to the
device itself.
The write path has no bound either: rmi_hid_write_block() copies an
unbounded len to &writeReport[4], and the largest caller a device can
drive at probe time is rmi_driver_set_irq_bits(), whose length is
derived from the interrupt source counts the device declares in its Page
Description Table.
Finally, the read loop cannot terminate on a zero-length reply: such a
reply copies nothing and advances neither bytes_read nor bytes_needed,
and because a reply did arrive the one second wait_event_timeout() does
not fire either, so a device answering 0 forever keeps the loop running
inside the probe worker with page_mutex held. khungtaskd does not
notice, because every reply wakes the task.
Reject reports too small for what the driver builds -- 6 output bytes
for the write reports and 3 input bytes for the read handshake -- at
probe time, clamp the write and the read copy to the report sizes the
device declared, and treat a zero-length reply as an error. A device
refused this way is started as an ordinary HID device, like one that
does not carry the RMI report ids at all.
RMI_DEVICE must not be left set in device_flags on that path, because
rmi_input_configured() would then run the RMI setup and reach
rmi_set_page(), which writes the writeReport buffer the refusal just
skipped allocating. The bit can arrive set: rmi_probe() copies
id->driver_data into device_flags before the report checks, and a bind
through the new_id sysfs attribute can supply driver_data with
RMI_DEVICE (BIT(0)) set. Strip the bit where driver_data is copied, so
RMI_DEVICE keeps meaning exactly "this probe validated the reports"; the
three jumps to start that predate this patch are covered as well.
The error path also clears RMI_READ_DATA_PENDING on its way out, because
that flag is what the wait at the top of the loop tests: leaving it set
would make every later wait_event_timeout() return immediately on the
stale reply and kill the read path for the rest of the device's life.
Clamping does not regress working hardware: the read loop already
handles
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
staging: rtl8723bs: fix OOB read in rtw_action_frame_parse()
rtw_action_frame_parse() takes a frame_len parameter but never
actually checks it before indexing into the frame body:
const u8 *frame_body = frame + sizeof(struct ieee80211_hdr_3addr);
...
c = frame_body[0];
...
a = frame_body[1];
frame_body already points 24 bytes (sizeof(struct
ieee80211_hdr_3addr)) into frame, so reading frame_body[0] and
frame_body[1] requires frame_len >= 26. A management action frame
shorter than that (e.g. exactly 24 bytes, the minimum a malicious
peer can send) causes a 1-2 byte out-of-bounds read.
This is reachable from rtw_cfg80211_monitor_if_xmit_entry() and
cfg80211_rtw_mgmt_tx() in ioctl_cfg80211.c, both of which pass
attacker/user-influenced frame buffers and lengths straight through.
Add the missing length check before frame_body is dereferenced. |
| Dell OpenManage Server Administrator, versions prior to 11.1.0.3, contains an Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') vulnerability. An unauthenticated attacker with remote access could potentially exploit this vulnerability, leading to Remote execution. |
| SSH.NET is a Secure Shell (SSH) library for .NET. Prior to 2026.0.0, ScpClient places caller-supplied remote paths into the command used to run scp on the server, and the default RemotePathTransformation.DoubleQuote transformation cannot safely quote every remote command interpreter. When an application passes an attacker-controlled path to a shell-based server, shell metacharacters not neutralized by the active IRemotePathTransformation can execute commands as the authenticated SSH user. Exploitation requires a shell-based server and a path crafted for that shell's parsing rules; non-shell servers and paths fully neutralized by the selected transformation are not affected. RemotePathTransformation.ShellQuote is available for POSIX shells, while SftpClient avoids a remote shell entirely. This issue is fixed in version 2026.0.0. |
| Nozomi Networks Labs identified a CWE-78: Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') vulnerability in the web management interface of Advantech EKI-1242IEIMS in firmware version V1.06.01 that allows a remote authenticated attacker to execute arbitrary OS commands as root via crafted request parameters. |
| Dell Update Package Framework, versions prior to 26.07.03, contains an Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') vulnerability. A low privileged attacker with local access could potentially exploit this vulnerability, leading to Elevation of privileges. |
| Nozomi Networks Labs identified a CWE-78: Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') vulnerability in the web management interface of Advantech EKI-1242IEIMS in firmware version V1.06.01 that allows a remote authenticated attacker to execute arbitrary OS commands as root via crafted request parameters. |
| Nozomi Networks Labs identified a CWE-78: Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') vulnerability in the web management interface of Advantech EKI-1242IEIMS in firmware version V1.06.01 that allows a remote authenticated attacker to execute arbitrary OS commands as root via crafted request parameters. |
| Nozomi Networks Labs identified a CWE-78: Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') vulnerability in the web management interface of Advantech EKI-1242IEIMS in firmware version V1.06.01 that allows a remote authenticated attacker to execute arbitrary OS commands as root via crafted request parameters. |
| Nozomi Networks Labs identified a CWE-78: Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') vulnerability in the web management interface of Advantech EKI-1242IEIMS in firmware version V1.06.01 that allows a remote authenticated attacker to execute arbitrary OS commands as root via crafted request parameters. |
| Nozomi Networks Labs identified a CWE-78: Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') vulnerability in the edgserver management service of Advantech EKI-1242EIMS in firmware version V1.06.01 that allows a remote unauthenticated attacker to execute arbitrary OS commands as root via crafted requests to TCP port 5058. |
| Imager::File::PNG versions from 1.003 before 1.004 for Perl write past the end of the row buffer reading a PNG with a tRNS transparency chunk in read_direct8.
With a tRNS chunk, read_direct8() adds an alpha channel to the image it creates but still sizes the row buffer from the original channel count. libpng expands the transparency into that extra channel, so png_read_row() fills one channel more than the buffer holds, at one byte per sample, and writes width bytes past the end of the allocation. Palette images go to read_paletted() and 16-bit images to read_direct16(), which sizes its buffer from png_get_rowbytes() and allocates enough for the expanded row.
The same reader ships bundled in the Imager distribution.
Reading an attacker-supplied PNG through Imager->read() corrupts the heap, which can crash the process. |
| A vulnerability in the IPsec Open API endpoint of Cisco ISE could allow an authenticated, remote attacker to inject arbitrary commands on the underlying operating system.
This vulnerability is due to insufficient validation of user-supplied input in IPsec Open API calls. An attacker could exploit this vulnerability by sending crafted input to the IPsec Open API endpoint on an affected device. A successful exploit could allow the attacker to execute arbitrary commands on the underlying operating system.
To exploit this vulnerability, the attacker must have valid administrative credentials and the node must have more than one network interface, one of which must be configured as an active IPsec tunnel.
Note: For CVE-2026-20283, Cisco has assigned a Security Impact Rating (SIR) of High rather than Medium as the score indicates. The reason is that it is easy to get to root from the achieved privilege level. |
| A flaw was found in Wildfly. A remote unauthenticated attacker can trigger OutOfMemoryError as CSIv2Util's GSS token decoder reads an attacker-controlled length field without bounds checking and attempts to allocate a byte array of that size. |
| snappy-java through 1.1.10.8 contains a buffer overflow vulnerability in Snappy.compress(ByteBuffer, ByteBuffer) that writes past the end of the destination buffer. Attackers can supply incompressible data that exceeds the destination buffer's remaining capacity, corrupting off-heap memory and causing JVM termination. |
| snappy-java through 1.1.10.8 contains a buffer overflow vulnerability in typed Snappy.uncompress*Array methods that allocate output arrays by dividing uncompressed length by element size but pass the undivided length to native code. Attackers controlling compressed input can cause misaligned length values to write past array bounds with attacker-controlled bytes, corrupting heap memory. |
| @cyclonedx/cyclonedx-npm creates CycloneDX Software Bill of Materials from npm projects. Prior to version 6.0.0, the Windows fallback path in src/npmRunner.ts, used when npm_execpath does not provide the npm CLI path, can construct a shell command containing an untrusted value from the --workspace option. When an attacker can influence that option and the fallback npm execution path is reached, shell metacharacters in the workspace value can execute arbitrary operating-system commands with the privileges of the user running the CLI, allowing data access, file modification, or service disruption. This issue is fixed in version 6.0.0. |
| An out-of-bounds write issue was addressed with improved bounds checking. This issue is fixed in iOS 26.7 and iPadOS 26.7, iOS 27 and iPadOS 27, macOS Golden Gate 27, macOS Sequoia 15.8, macOS Tahoe 26.7, tvOS 27, visionOS 27, watchOS 27. Processing a maliciously crafted 3D model may lead to memory corruption. |
| An out-of-bounds write issue was addressed with improved bounds checking. This issue is fixed in macOS Sequoia 15.7.8, macOS Sonoma 14.8.8, macOS Tahoe 26.6. Mounting a malicious disk image may cause unexpected system termination. |
| An out-of-bounds write issue was addressed with improved bounds checking. This issue is fixed in iOS 27 and iPadOS 27, macOS Golden Gate 27, macOS Sequoia 15.8, macOS Tahoe 26.7, tvOS 27, visionOS 27, watchOS 27. Processing a maliciously crafted file may lead to unexpected app termination. |
