| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Vulnerability involving incorrect access control in the Tools::getRemoteAddr() function in PrestaShop, which allows the client’s IP address to be spoofed via the X-Forwarded-For header when the application is running behind a reverse proxy, load balancer or CDN. The application incorrectly processes the IP address string and uses the address controlled by the visitor rather than the one provided by the trusted infrastructure, allowing an unauthenticated remote attacker to cause the application to interpret their connection as originating from an arbitrary IP address. This condition allows IP-based controls, such as the maintenance mode allowlist, to be bypassed, as well as enabling the forgery of security and audit logs and the evasion of third-party mechanisms that rely on the IP address, such as geolocation checks, fraud detection or request throttling. |
| nebula-mesh is a self-hosted control plane for Slack Nebula mesh VPN. Prior to version 0.7.1, revocation is the only in-band mechanism that isolates a compromised/offboarded host from a Nebula mesh. Because the blocklist never reaches any peer's config.yml, a Blocked host retains full overlay reachability to every peer under its CA (and internal services on the mesh) for up to 30d (agent) / 365d (mobile). An attacker who exfiltrates host.key+host.crt can run stock slackhq/nebula directly, ignore the agent's 403/410 poll responses, and stay connected after the operator revokes the host. Operator-visible state (UI shows blocked, audit log records it) is misleading. This issue has been patched in version 0.7.1. |
| In JetBrains YouTrack before 2026.2.18634 iP spoofing via HTTP headers allowed forged Bitbucket webhooks |
| In JetBrains YouTrack before 2025.3.161254,
2026.1.14042 improper authentication in YouTrack Helpdesk allowed unauthenticated account takeover via a self-asserted email address |
| Unauthenticated Bypass Vulnerability in Pre-Orders for WooCommerce <= 2.3 versions. |
| Unauthenticated Bypass Vulnerability in FluentBooking Pro <= 2.2.1 versions. |
| Improper certificate validation in Checkmk <2.5.0p10 allows a relay and a push agent that share the same UUID to reuse each other's mTLS certificate to authenticate against agent receiver endpoints in either direction, because the endpoints do not verify that the certificate was issued by their own root certificate. |
| MOOS core-moos through 10.4.0 fails to validate client identity in MOOSDB message processing, allowing authenticated attackers to attribute writes to other clients by supplying arbitrary source identifiers in serialized messages. Attackers can forge message origins and cancel third-party subscriptions by exploiting the disconnect between authenticated connection identity and wire-supplied source attribution. |
| In specific scenarios, Reactor Netty HTTP Server may incorrectly evaluate the remote IP address when HAProxy Protocol is enabled. In order for this to happen, the application must be configured to use HAProxy Protocol.
Reactor Netty 1.3.0 - 1.3.6
Reactor Netty 1.1.0 - 1.2.18
Reactor Netty 1.0.52 and earlier |
| Wss4jSecurityInterceptor did not consistently wire Apache WSS4J ReplayCache instances into RequestData for validation-time checks. As a result, protections against replay of UsernameToken nonces and creation timestamps, Timestamp elements, and certain SAML one-time-use semantics could be ineffective even when operators configured a replay cache on the interceptor.
Affected versions:
Spring Web Services 5.0.0 through 5.0.1; 4.1.0 through 4.1.3; 4.0.0 through 4.0.18; 3.1.0 through 3.1.8. |
| Spring Boot's Mail auto-configuration does not enable hostname verification. Applications that set the relevant JavaMail property, such as spring.mail.properties.mail.smtp.ssl.checkserveridentity=true, are not affected.
Affected versions:
Spring Boot 4.0.0 through 4.0.6; 3.5.0 through 3.5.14; 3.4.0 through 3.4.16. |
| Filament is a collection of full-stack components for accelerated Laravel development. From 4.0.0 until 4.12.6 and 5.7.6, packages/panels/src/Auth/MultiFactor/App/AppAuthentication.php uses AppAuthentication::verifyCode() with a used-code cache key derived from both the app authentication secret and the submitted TOTP code. This isolates the newest accepted timestep by code instead of by secret, allowing a previously issued app-based MFA code to be accepted after a newer code has already been used. Reuse of the exact same code was already prevented, but another code inside the accepted time window remained usable. An attacker who obtains the target account's password and one app-based MFA code can use that code for the remainder of the configured window, which is approximately four minutes with the default settings, even after the legitimate account holder logs in with a newer code. Email-based MFA is not affected. This issue is fixed in versions 4.12.6 and 5.7.6. |
| In the current development version of Eclipse aeriOS, for which no official release has yet been published, the Federator component disables TLS certificate validation for outbound HTTPS connections by default. When the TLS_CERTIFICATE_VALIDATION environment variable is unset or set to false, the component configures its HTTP transport to skip TLS certificate verification.
As a result, an attacker able to intercept network communications between the Federator and external services could impersonate those services and intercept sensitive information transmitted over HTTPS, including OAuth client credentials and bearer tokens.
The issue has been addressed by enabling TLS certificate validation by default. The TLS_CERTIFICATE_VALIDATION environment variable is now set to true in the default configuration provided by the Helm chart and Docker Compose deployment. |
| TP-Link TL-WR841N dropbearpwd Improper Authentication Information Disclosure Vulnerability. This vulnerability allows network-adjacent attackers to disclose sensitive information on affected installations of TP-Link TL-WR841N routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the httpd service, which listens on TCP port 80 by default. The issue results from improper authentication. An attacker can leverage this vulnerability to disclose stored credentials, leading to further compromise. Was ZDI-CAN-19899. |
| Improper privilege management in Downloads in Google Chrome prior to 152.0.7977.75 allowed a remote attacker who had compromised the renderer process to spoof address bar via a crafted HTML page. (Chromium security severity: Medium) |
| When SAML IdP-initiated login is enabled in Grafana Enterprise, the SAML library skips validation of the InResponseTo field on all SAML responses, including SP-initiated logins. This removes anti-replay protection, allowing an attacker who obtains a valid signed SAML assertion to replay it and gain a session as the victim user. Only instances with the allow_idp_initiated SAML setting enabled are affected; this setting is off by default and Grafana OSS is not affected. |
| Improper Certificate Validation vulnerability in Thales SafeNet Agent for Windows Logon on Windows allows Signature Spoofing by Improper Validation.
This issue affects SafeNet Agent for Windows Logon: 4.0.0, 4.1.1, 4.1.2. |
| In the current development version of Eclipse aeriOS, which has not yet had an official release, the KrakenD instance included in the API Gateway component had the disable_jwk_security parameter hard-coded to true, with no option to override it through the Helm chart configuration. This setting disables TLS certificate verification when KrakenD retrieves the JSON Web Key Set (JWKS) used to validate bearer tokens, potentially allowing an attacker with the ability to intercept this communication to provide a malicious JWKS and compromise token validation.
The issue has been addressed by making the parameter configurable through the boolean Helm value krakend.config.disableJwkSecurity and setting its default value to false, ensuring that TLS certificate verification is enabled by default. |
| In Eclipse Arrowhead versions from 5.0.0 to 5.2.1 when the MQTT API is enabled with the certificate authentication policy, CertificateMqttFilter parses an X.509 certificate that the client sends inside the MQTT message payload (the authentication field of MqttRequestTemplate) and treats its Subject DN as the authenticated identity. The certificate is decoded with CertificateFactory.generateCertificate() but its signature is never verified and its issuer chain is never validated against any trust store. Authorisation is reduced to two string comparisons on attacker-supplied data: the DN-qualifier must equal "sy" or "op", and the cloud-name part of the CN must match the server's. Both values are public (the cloud name is in the server's own TLS certificate). An attacker who can publish to the MQTT broker can therefore mint a self-signed certificate with CN=Sysop.<cloud>.<org>.arrowhead.eu, dnQualifier=op, send it as the authentication field, and be authenticated as the cloud's system operator with isSysOp == true. This passes the downstream ManagementServiceMqttFilter (request.isSysOp() → allowed) and gives full management access over MQTT. The HTTP CertificateFilter is not affected — it reads the certificate from jakarta.servlet.request.X509Certificate, which Tomcat populates only after a successful mTLS handshake against the configured trust store. |
| Open edX Platform enables the authoring and delivery of online learning at any scale. Prior to commit 3a5ac85, a security vulnerability has been identified in the Open edX LMS platform's LTI (Learning Tools Interoperability) Provider implementation. The validate_timestamp_and_nonce function in lms/djangoapps/lti_provider/signature_validator.py does not validate OAuth nonces or timestamps, allowing an attacker who captures a valid LTI launch request to replay it an unlimited number of times without detection. This issue has been patched via commit 3a5ac85. |
