| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: usb-audio: fix OOB write in snd_usbmidi_us122l_output()
The snd_usbmidi_us122l_output() picks a count of 2 on anything slower
than high speed and never relates it to ep->max_transfer. The URB
buffer holds exactly max_transfer bytes, so a device declaring a one
byte bulk endpoint takes two bytes from snd_rawmidi_transmit(), and the
memset that pads the rest computes 1 - 2 in int and wraps to SIZE_MAX.
Only 0x800e and 0x800f are pinned to nine bytes. The US-122MKII at
0x0644:0x8021 falls to the default and takes usb_maxpacket(), which the
USB core only clamps downward.
The akai and novation output ops in this file were given the same guard
recently. Do the same here. |
| HP has identified and remediated multiple externally reported vulnerabilities within HPLIP. The findings affect several software components that could potentially enable remote code execution, privilege escalation, denial of service, information disclosure, or unauthorized file modification under certain conditions. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: wacom: validate report length in wacom_intuos_pro2_bt_irq
wacom_intuos_pro2_bt_irq() receives the wire report length in `len`
but never consults it before parsing. After the report-id gate it
unconditionally calls wacom_intuos_pro2_bt_pen() and then, selected by
features.type, a fixed chain of sub-parsers, none of which receive
`len`:
wacom_intuos_pro2_bt_pen(wacom);
if (type == INTUOSP2_BT || type == INTUOSP2S_BT) {
wacom_intuos_pro2_bt_touch(wacom);
wacom_intuos_pro2_bt_pad(wacom);
wacom_intuos_pro2_bt_battery(wacom);
} else {
wacom_intuos_gen3_bt_pad(wacom);
wacom_intuos_gen3_bt_battery(wacom);
}
Each sub-parser dereferences wacom->data at fixed offsets. The furthest
byte touched on each branch is:
INTUOSP2_BT / INTUOSP2S_BT: wacom_intuos_pro2_bt_pad() reads data[285]
(the touchring byte), so the report must be at least 286 bytes;
INTUOSHT3_BT ("gen3"): wacom_intuos_gen3_bt_battery() reads data[45],
so the report must be at least 46 bytes.
features.type is selected from the VID/PID id_table entry and
wacom_setup_device_quirks() force-registers the pen/pad/touch inputs
for that type independent of the report descriptor, so a malicious or
malfunctioning paired/spoofed Bluetooth peripheral can advertise that
VID/PID and send an undersized report that still satisfies the
data[0] == 0x80/0x81 gate. The driver then reads past the received
report and forwards the bytes to userspace via evdev (MSC_SERIAL /
ABS_MISC / ABS_WHEEL on the pen and pad input nodes), an out-of-bounds
read with a concrete userspace read-back channel, and a true
out-of-bounds read on transports whose backing buffer is sized to the
(small) report descriptor rather than a fixed-size staging buffer.
This is the same class of bug commit 2f1763f62909 ("HID: wacom: fix
out-of-bounds read in wacom_intuos_bt_irq") already hardened in the
sibling wacom_intuos_bt_irq(), which guards each report id against its
minimum length before parsing.
Guard wacom_intuos_pro2_bt_irq() the same way: before parsing, reject
reports shorter than the furthest offset the selected branch actually
dereferences, warn, and bail out. Because the whole pen/touch/pad/
battery chain runs unconditionally per branch, a single up-front check
against the maximum offset (286 bytes for INTUOSP2_BT/INTUOSP2S_BT,
46 bytes for the gen3 branch) bounds every sub-parser. Returning 0 on
a short report also skips those calls for the same malformed report,
which is the safe, conservative behavior. |
| Dell Update Package Framework, versions prior to 26.07.03, contains a Stack-based Buffer Overflow vulnerability. An unauthenticated attacker with adjacent network access could potentially exploit this vulnerability, leading to Remote execution. |
| In the Linux kernel, the following vulnerability has been resolved:
powerpc/mm: fix wrong addr_pfn tracking in compound vmemmap population
vmemmap_populate_compound_pages() uses addr_pfn to determine the PFN
offset within a compound page and to decide whether the current vmemmap
slot should be populated as a head page mapping or should reuse a tail
page mapping.
However, addr_pfn is advanced manually in parallel with addr. The loop
itself progresses in vmemmap address space, so each PAGE_SIZE step in addr
covers PAGE_SIZE / sizeof(struct page) struct page slots. Since addr_pfn
is compared against nr_pages in data-PFN units, it should advance by the
same number of PFNs. The existing manual increments do not match that and
therefore do not reliably track the PFN corresponding to the current addr.
As a result, pfn_offset can be computed from the wrong PFN and the code
can make the head/tail decision for the wrong compound-page position.
Fix this by deriving addr_pfn directly from the current vmemmap address
instead of carrying it as loop state. |
| In the Linux kernel, the following vulnerability has been resolved:
accel/amdxdna: return early from a zero-length flush
SYNC_BO does not constrain its size, so a request for zero bytes reaches
drm_clflush_virt_range(), which ends with an unconditional
clflushopt(end - 1). For an empty range that is the byte before the
mapping, and abo->mem.kva comes from vmap(), so the access lands in the
guard page below the vmalloc area and faults:
BUG: unable to handle page fault for address: ffffd16fbbc70fff
#PF: supervisor read access in kernel mode
Oops: Oops: 0000 [#1] SMP NOPTI
CPU: 7 UID: 1000 Comm: sync_bo_probe
RIP: 0010:drm_clflush_virt_range+0x3c/0x70
Call Trace:
amdxdna_drm_sync_bo_ioctl+0x124/0x430 [amdxdna]
drm_ioctl+0x301/0x4c0
__x64_sys_ioctl+0x115/0x2f0
do_syscall_64+0xa6/0x3d0
Any process that can open the render node can do this. Reproduced 3 of 3
times on a Strix Point NPU (1022:17f0), by calling SYNC_BO with size 0 on
an AMDXDNA_BO_SHARE object. The import arm takes the same request but
flushes the whole scatterlist, so it survives it.
Nothing needs flushing for an empty range, so answer before choosing a
path. |
| In the Linux kernel, the following vulnerability has been resolved:
media: rtl2832_sdr: release URBs and stream buffers on start_streaming() failure
rtl2832_sdr_start_streaming() calls rtl2832_sdr_alloc_stream_bufs(),
rtl2832_sdr_alloc_urbs() and rtl2832_sdr_submit_urbs() in sequence and
shares a single err: label that only unlocks the mutex and returns.
When alloc_urbs() succeeds but submit_urbs() fails, or when alloc_urbs()
itself returns -ENOMEM after alloc_stream_bufs() has already succeeded,
the URBs and/or the coherent DMA stream buffers stay allocated while
streaming reports failure to vb2. Two latent defects follow on the next
VIDIOC_STREAMON:
1) rtl2832_sdr_alloc_stream_bufs() unconditionally resets dev->buf_num
to 0 and overwrites dev->buf_list[]/dev->dma_addr[], permanently
leaking the coherent DMA memory allocated by the previous attempt.
2) rtl2832_sdr_alloc_urbs() never resets dev->urbs_initialized and only
increments it. After a second successful pass urbs_initialized can
exceed MAX_BULK_BUFS, so the subsequent rtl2832_sdr_free_urbs() walks
from urbs_initialized - 1 down to 0 and reads past the end of
dev->urb_list[], passing garbage pointers to usb_free_urb().
Mirror the teardown that stop_streaming() already performs: on the error
path call rtl2832_sdr_free_urbs() and rtl2832_sdr_free_stream_bufs()
before unlocking. Both helpers are idempotent (free_urbs kills and zeros
urbs_initialized; free_stream_bufs is gated on URB_BUF and clears the
buf_num counter), so partial-failure paths and the no-allocation paths
remain safe.
Issue identified by automated review of the INV-003 series at
https://sashiko.dev/ |
| A flaw was found in Undertow. A remote attacker can cause Out of Memory on websockets endpoint without authentication on any @ServerEndpoint class that has any @OnMessage method. This allows an attacker to cause Denial of Service attack without authentication and using only a standard WebSocket handshake. |
| Out-of-bounds read in Windows Win32K - GRFX allows an authorized attacker to elevate privileges locally. |
| Heap-based buffer overflow in Windows Internet Key Exchange (IKE) Protocol allows an unauthorized attacker to deny service over a network. |
| An out-of-bounds read was addressed with improved bounds checking. This issue is fixed in iOS 27 and iPadOS 27, macOS Golden Gate 27, tvOS 27, visionOS 27, watchOS 27. Processing a maliciously crafted font may result in the disclosure of process memory. |
| An out-of-bounds access issue was addressed with improved bounds checking. This issue is fixed in macOS Golden Gate 27, macOS Sequoia 15.8, macOS Tahoe 26.7. Connecting to a malicious SMB server may cause unexpected system termination or corrupt kernel memory. |
| A vulnerability in Cisco Adaptive Security Device Manager (ASDM) single sign-on (SSO) handler for Cisco Secure FMC Software could allow an unauthenticated, remote attacker to log in as the Cisco ASDM administrator user.
This vulnerability is due to improper management of the Cisco ASDM SSO token. An attacker could exploit this vulnerability by performing session token forgery techniques. A successful exploit could allow the attacker to log in as the administrator user and, by repeating this action, keep legitimate administrators locked out of the ASDM indefinitely. |
| BlueKitchen BTstack through 1.8.2 fails to validate the peer-reported endpoint count against table bounds in A2DP stream endpoint discovery. A bonded peer can send an AVDTP DISCOVER response with more endpoints than the fixed table holds, causing out-of-bounds writes that corrupt adjacent static objects and crash the process or sever event delivery. |
| An out-of-bounds read was addressed with improved bounds checking. This issue is fixed in macOS Golden Gate 27, macOS Sequoia 15.8, macOS Tahoe 26.7. Processing a maliciously crafted disk image may lead to unexpected app termination. |
| As part of Cisco's ongoing commitment to proactive security and product quality, the Cisco Secure Email Gateway and Cisco Secure Email and Web Manager engineering team has conducted a comprehensive internal security review. This review resulted in software hardening releases that address multiple internally discovered vulnerabilities.
The vulnerabilities tracked by CVE-2026-76442 are related to issues with improper validation of specified quantity in input that are grouped under the Common Weakness Enumeration (CWE) Pillar CWE-1284. |
| On affected platforms running Arista EOS with OSPFv2 and OSPFv2 segment routing configured, a specially crafted OSPFv2 packet from an adjacent OSPF neighbor may cause OSPF to restart unexpectedly. |
| Stack-based buffer overflow vulnerability in Samsung Opensource rLottie allows attackers to overflow buffers, leading to memory corruption when rendering crafted vector animations.
This issue affects rLottie: 480a2ad0c5d2e45458c545b8213279e9e8b71e39. |
| In NLnet Labs Unbound up to and including 1.26.0, a 255 length query name with a large TCP response can lead to a heap buffer overflow during the RRSet canonicalisation routine. This is caused by missing to add the first owner name into the buffer length check. A malicious actor operating a malicious name server or tampering with an incoming response to Unbound (canonicalisation happens before DNSSEC validation), can trigger the vulnerability. |
| In NLnet Labs Unbound up to and including 1.26.0, a vulnerability was found in the DNSSEC validator that enables denial of service and possible remote code execution as a result of digesting DNSKEYs. A DNSKEY with an owner compression pointer to its own RDATA can overflow the digest buffer. Remote code execution is possible through attacker controlled data. An adversary can exploit the vulnerability by controlling a malicious zone and querying a vulnerable Unbound. |
