| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| The Extendify plugin for WordPress is vulnerable to Stored Cross-Site Scripting via 'styles.blocks' Block Type Key in all versions up to, and including, 3.1.6 due to insufficient input sanitization and output escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. This is possible because registerIncoming() is hooked on rest_request_before_callbacks and runs before WordPress evaluates the route's permission_callback, meaning any unauthenticated POST, PUT, or PATCH request to a /wp/v2/global-styles route can trigger the vulnerable code path. |
| Allocation of Resources Without Limits or Throttling, Improper Handling of Highly Compressed Data (Data Amplification) vulnerability in Apache Thrift C++ bindings.
This issue affects Apache Thrift: before 0.25.0.
Users are recommended to upgrade to version 0.25.0, which fixes the issue. |
| Unauthenticated Broken Access Control in WP Full Stripe Free <= 8.5.6 versions. |
| The ByteCoreStack – MCP Connector for AI Tools plugin for WordPress is vulnerable to Privilege Escalation in all versions up to, and including, 1.2.3 This is due to the `wp_update_user_meta` MCP tool in `execute_tool` gating writes solely with `current_user_can('edit_user', $uid)` — a check that WordPress core's `map_meta_cap` resolves to the `read` primitive when the target user ID matches the caller's own — while enforcing an incomplete meta key blocklist that covers only `user_pass`, `user_activation_key`, and `session_tokens`, leaving the `wp_capabilities` and `wp_user_level` meta keys entirely unprotected. This makes it possible for authenticated attackers with Subscriber-level access and above to elevate their privileges to Administrator by issuing a `wp_update_user_meta` call over the MCP JSON-RPC endpoint with `key=wp_capabilities` and an arbitrary role array such as `{'administrator': true}` targeting their own user ID, causing WordPress to load that account as an Administrator on the next request. |
| The Super Forms – Drag & Drop Form Builder plugin for WordPress is vulnerable to Arbitrary File/Directory Deletion in all versions up to, and including, 6.3.316. This is due to the `super_save_form` AJAX handler performing no capability check — allowing Subscriber-level authenticated users to create or modify Super Forms and enable the `file_upload_submission_delete` setting — combined with the `super_submit_form` handler's `submit_form` function passing the attacker-controlled `files[].subdir` value from `$_POST['data']` directly into `SUPER_Common::delete_dir()` without sanitization, and a trivially bypassed `ABSPATH` guard that a `subdir` value of `wp-config.php` defeats because `dirname(realpath(ABSPATH . $subdir))` resolves to the WordPress root while the naive `ABSPATH !== $dir` string check fails to match due to a trailing-slash mismatch. This makes it possible for authenticated attackers, with Subscriber-level access and above, to recursively delete arbitrary files and directories on the server, up to and including the entire WordPress installation, resulting in full site takedown and potential remote code execution if critical files such as `wp-config.php` are removed and the site is subsequently re-installed by another party. |
| The GeoDirectory plugin for WordPress is vulnerable to SQL Injection via the stored latitude/longitude coordinates of a listing in versions up to, and including, 2.8.186. This is due to insufficient escaping and the absence of numeric validation on coordinate values when a listing is saved, combined with the direct string interpolation of those values into a distance sub-expression in geodir_gps_query_part() that is later executed by the public wp_ajax_nopriv_geodir_widget_listings handler when a caller supplies set_post=<pending-listing-id> and sort_by=distance_asc. This makes it possible for authenticated attackers, with Subscriber-level access and above, to append additional SQL queries into already existing queries that can be used to extract sensitive information from the database. |
| The BA Book Everything plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the 'booking_service_qty' parameter in all versions up to, and including, 1.8.28 due to insufficient input sanitization and output escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. Successful exploitation requires that an administrator or other privileged user opens the injected order record in the plugin's wp-admin order management area, which is the plugin's ordinary order-review workflow. |
| The Magic Tooltips For Contact Form 7 plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the 'author' parameter in all versions up to, and including, 1.0.34 due to insufficient input sanitization and output escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. This is possible because the plugin's esc_html filter callback decodes HTML-entity-encoded payloads (e.g. those containing '<tip>') back into live HTML, meaning an entity-encoded script payload submitted as a comment author name — which bypasses sanitize_text_field — is rendered as executable markup when an administrator views wp-admin/edit-comments.php. |
| The Kubio AI Page Builder plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the 'comment' parameter in all versions up to, and including, 2.9.2 due to insufficient input sanitization and output escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. |
| In the Linux kernel, the following vulnerability has been resolved:
bluetooth/l2cap: sync sock recv cb and release
The problem occurs between the system call to close the sock and hci_rx_work,
where the former releases the sock and the latter accesses it without lock protection.
CPU0 CPU1
---- ----
sock_close hci_rx_work
l2cap_sock_release hci_acldata_packet
l2cap_sock_kill l2cap_recv_frame
sk_free l2cap_conless_channel
l2cap_sock_recv_cb
If hci_rx_work processes the data that needs to be received before the sock is
closed, then everything is normal; Otherwise, the work thread may access the
released sock when receiving data.
Add a chan mutex in the rx callback of the sock to achieve synchronization between
the sock release and recv cb.
Sock is dead, so set chan data to NULL, avoid others use invalid sock pointer. |
| In the Linux kernel, the following vulnerability has been resolved:
net: dsa: bcm_sf2: bound the CFP rule dump by the caller's buffer size
bcm_sf2_cfp_rule_get_all() walks the whole cfp.unique bitmap into
rule_locs[] without consulting nfc->rule_cnt, which is how many entries
the caller had room for. ETHTOOL_GRXCLSRLALL requires no CAP_NET_ADMIN
and the ioctl sizes the buffer from the rule_cnt userspace passes in, so
once an admin has installed CFP rules any user can ask for fewer slots
than there are rules and run off the end of the allocation. A rule_cnt
of 0 leaves the buffer pointer NULL and the walk dereferences it. |
| In the Linux kernel, the following vulnerability has been resolved:
net: dsa: mv88e6xxx: bound the policy rule dump by the caller's buffer size
mv88e6xxx_get_rxnfc() uses rxnfc->rule_cnt as the write index while
dumping the policy IDR, clobbering the input value before it has been
looked at. That input is the number of entries the caller had room for.
ETHTOOL_GRXCLSRLALL requires no CAP_NET_ADMIN and the ioctl sizes the
buffer from the rule_cnt userspace passes in, so once an admin has
installed policy rules any user can ask for fewer slots than there are
rules and run off the end of the allocation. A rule_cnt of 0 leaves the
buffer pointer NULL and the walk dereferences it.
Count into a local so the caller's limit survives the walk, and stop with
-EMSGSIZE once it is reached. |
| In the Linux kernel, the following vulnerability has been resolved:
net: usb: cx82310_eth: drop URB after 0xffff reboot sentinel to prevent partial_data heap overflow
The 0xffff length sentinel detects a router reboot and schedules
re-enabling of ethernet mode, but then falls through to the rest
of the loop body. The next check is
} else if (len > CX82310_MTU) {
which is the else of the just-matched if -- it never fires for
len == 0xffff. The MTU bound that normally caps the
incomplete-packet save path is silently bypassed.
With 0xffff > skb->len always true (rx_urb_size is 4096), the
incomplete-packet branch saves dev->partial_len = skb->len bytes
into dev->partial_data. partial_data is kmalloc(hard_mtu) =
kmalloc(CX82310_MTU + 2) = 1516 bytes, but skb->len after the
2-byte header pull can be up to 4094. A device that sends a
4096-byte URB starting with [0xff 0xff] therefore copies 4094
device-provided bytes into a buffer allocated for 1516 bytes,
exceeding its requested size by 2578 bytes.
The next URB then reads dev->partial_len (4094) back from the same
1516-byte buffer and dev->partial_rem (65535 - 4094 = 61441) from
the new URB's ~4KB skb, both well past their allocations, and
delivers the spliced result as a 64KB "frame" to the network
stack.
Bail out of rx_fixup after scheduling the re-enable work; the
remainder of a reboot-marker URB is not meaningful packet data.
This restores the invariant that partial_len < CX82310_MTU + 2 on
the save path, since every other route there has already passed
the MTU check. |
| In the Linux kernel, the following vulnerability has been resolved:
vxlan: reject dynamic fdb entries that reference a nexthop id
The commit cited in the Fixes tag allowed VXLAN FDB entries to point to
FDB nexthops so that overlay traffic could be load balanced across
multiple VTEPs. Such entries can only be configured from user space,
cannot be learned and cannot roam. They only make sense with a user space
control plane such as E-VPN where data plane learning is disabled.
Despite that, the VXLAN driver does not currently prevent such entries
from being configured with the "dynamic" flag. The per-nexthop FDB list
is only protected by the per-device hash lock, which is not sufficient
when two VXLAN devices point to the same FDB nexthop and therefore share
the list. Aging runs in softirq context without RTNL, so an entry deleted
by one device can race with an addition or deletion from the other,
leading to list corruption:
list_del corruption. next->prev should be ffff8881069d9548, but was
dead000000000122. (next=ffff8881069d9448)
WARNING: CPU: 0 PID: 90 at lib/list_debug.c:65
__list_del_entry_valid_or_report+0x1aa/0x210
...
vxlan_fdb_destroy+0x5b8/0xad0
vxlan_cleanup+0x328/0x450
call_timer_fn+0x2a/0x1c0
run_timer_softirq+0x18c/0x210
BUG: KASAN: slab-use-after-free in vxlan_fdb_destroy
Fix this by rejecting the bogus configuration of dynamic FDB entries that
point to FDB nexthops, both when created and when an existing entry is
updated. As such, the per-nexthop FDB list is only ever mutated under the
RTNL lock. Add test cases to make sure that this does not regress in the
future. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: defer qdisc freeing after failed creation
An RTM_NEWQDISC request can make clsact bind a populated shared ingress
block during ->init(), publishing an embedded mini_Qdisc to lockless
readers. If the same request has an invalid TCA_RATE, estimator setup
fails after ->init(); the unwind removes the pointer but synchronously
frees its containing qdisc while tc_run() may still hold it.
Retire failed qdiscs through the same RCU helper as normal destruction.
Inline the synchronous free into the callback now that no direct callers
remain. |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5e: Fix use-after-free race in sample_restore_put()
Concurrent teardown of TC sample rules sharing the same restore
context may re-read restore->count after dropping restore_lock.
At that point another thread may already have completed cleanup and
freed the restore object.
Use the result of the refcount decrement while holding restore_lock to
determine whether cleanup is needed. |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5: E-Switch: fix use-after-free in mlx5_eswitch_termtbl_put
In mlx5_eswitch_termtbl_put(), the zero-ref cleanup check reads
tt->ref_count after termtbl_mutex has been released. Two concurrent
callers on the same mlx5_termtbl_handle race: one decrements ref_count
to zero, removes the hash entry, and calls kfree(tt) while the other
has already dropped the mutex and is about to evaluate
if (!tt->ref_count), producing a use-after-free.
Fix this by capturing the result of the decrement into a stack-local
last variable before dropping the mutex. The cleanup decision is now
made entirely under termtbl_mutex, and tt is not touched after
kfree. |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5: E-Switch, prevent mc_list repopulation during vport disable
In mlx5_esw_vport_disable(), move esw_apply_vport_rx_mode() ahead
of esw_vport_change_handle_locked() so vport->allmulti_rule is
NULL before the change handler observes it.
During FW-fatal recovery the disable runs while dev->state ==
INTERNAL_ERROR. The promisc query inside esw_update_vport_rx_mode()
fails and returns early, leaving vport->allmulti_rule intact, so
esw_update_vport_mc_promisc() runs and adds MLX5_ACTION_ADD entries
to vport->mc_list whose flow rules are then installed in the FDB
by esw_add_mc_addr(). esw_destroy_legacy_table() tears down the
FDB with those refs still held, corrupting the sub-tree and
leaving dangling flow_rule pointers in vport->mc_list.
Two-stage failure on `echo 1 > /sys/bus/pci/devices/<bdf>/reset`:
refcount_t: underflow; use-after-free.
tree_put_node+0xef/0x110 [mlx5_core]
clean_tree+0x44/0xd0 [mlx5_core] (x5)
mlx5_fs_core_cleanup+0x57/0x1c0 [mlx5_core]
mlx5_unload+0x65/0xd0 [mlx5_core]
... mlx5_health_try_recover
BUG: unable to handle page fault for address: 0000000003000055
down_write+0x1c/0x60
mlx5_del_flow_rules+0x33/0x1f0 [mlx5_core]
esw_del_mc_addr+0x7b/0x170 [mlx5_core]
esw_apply_vport_addr_list+0x56/0xf0 [mlx5_core]
esw_vport_change_handle_locked+0x28b/0x310 [mlx5_core]
mlx5_esw_vport_enable+0x270/0x4a0 [mlx5_core]
... mlx5_load ... mlx5_health_try_recover
esw_apply_vport_rx_mode(false, false) clears vport->allmulti_rule
via its local state machine even when the FW del fails. With the
rule NULL the !IS_ERR_OR_NULL(allmulti_rule) gate in the change
handler closes, no rules are installed during disable, and the
reload starts with a clean mc_list. |
| In the Linux kernel, the following vulnerability has been resolved:
vdpa_sim_blk: reject out-of-range sector starts
vdpasim_blk_check_range() logs an invalid start sector but continues
validating the request. The subsequent unsigned capacity subtraction can
underflow and let an out-of-range buffer offset reach the data path.
The invalid offset is used by three request paths. VIRTIO_BLK_T_OUT
copies guest data to blk->buffer + offset through
vringh_iov_pull_iotlb(), causing an out-of-bounds write in
_copy_from_iter() or memcpy(). VIRTIO_BLK_T_IN copies from
blk->buffer + offset to the guest through vringh_iov_push_iotlb(),
causing an out-of-bounds read in _copy_to_iter().
VIRTIO_BLK_T_WRITE_ZEROES passes blk->buffer + offset to memset(),
causing an out-of-bounds write.
Reject starts at or beyond the capacity before the subtraction. Treat the
capacity boundary as invalid because the IN and OUT paths round byte counts
down to sectors for validation but later copy the original byte counts. A
sub-sector request at the capacity boundary would otherwise still access
past the end of the buffer.
I found this bug myself, though the patch was written with AI assistance. |
| In the Linux kernel, the following vulnerability has been resolved:
vdpa_sim_net: check TX pull result before RX copy
vringh_iov_pull_iotlb() returns a signed byte count. A failed TX pull is
currently added to the unsigned byte counter and then passed as a size_t
length to receive_filter() and vringh_iov_push_iotlb(). A negative error
can therefore become a large length in the RX path.
Handle non-positive pull results before every length use. Count the TX
error and complete the consumed TX descriptor with zero bytes.
I found this bug myself, though the patch was written with AI assistance. |