| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| An interaction between Microsoft Outlook Web Access (OWA) with RSA SecurID allows local users to bypass the SecurID authentication for a previous user via several submissions of an OWA Authentication request with the proper OWA password for the previous user, which is eventually accepted by OWA. |
| Epic Games Unreal Engine 226f through 436 does not validate the challenge key, which allows remote attackers to exhaust the player limit by joining the game multiple times. |
| An authorization issue was addressed with improved state management. This issue is fixed in iOS 18.7.5 and iPadOS 18.7.5, iOS 26.3 and iPadOS 26.3. An attacker with physical access to a locked device may be able to view sensitive user information. |
| Rack::Session is a session management implementation for Rack. From 2.0.0 to before 2.1.2, Rack::Session::Cookie incorrectly handles decryption failures when configured with secrets:. If cookie decryption fails, the implementation falls back to a default decoder instead of rejecting the cookie. This allows an unauthenticated attacker to supply a crafted session cookie that is accepted as valid session data without knowledge of any configured secret. Because this mechanism is used to load session state, an attacker can manipulate session contents and potentially gain unauthorized access. This vulnerability is fixed in 2.1.2. |
| The MetForm – Contact Form, Survey, Quiz, & Custom Form Builder for Elementor plugin for WordPress is vulnerable to Sensitive Information Exposure in versions up to, and including, 4.1.0. This is due to the use of a forgeable cookie value derived only from the entry ID and current user ID without a server-side secret. This makes it possible for unauthenticated attackers to access form submission entry data via MetForm shortcodes for entries created within the transient TTL (default is 15 minutes). |
| OAuthenticator is software that allows OAuth2 identity providers to be plugged in and used with JupyterHub. Prior to version 17.4.0, an authentication bypass vulnerability in oauthenticator allows an attacker with an unverified email address on an Auth0 tenant to login to JupyterHub. When email is used as the usrname_claim, this gives users control over their username and the possibility of account takeover. This issue has been patched in version 17.4.0. |
| The Japanized for WooCommerce plugin for WordPress is vulnerable to Improper Authentication in versions up to, and including, 2.8.4. This is due to a flawed permission check in the `paidy_webhook_permission_check` function that unconditionally returns `true` when the webhook signature header is omitted. This makes it possible for unauthenticated attackers to bypass payment verification and fraudulently mark orders as "Processing" or "Completed" without actual payment via a crafted POST request to the Paidy webhook endpoint. |
| Improper authentication in Windows Storage allows an authorized attacker to elevate privileges locally. |
| Improper authentication in Windows Admin Center allows an authorized attacker to elevate privileges over a network. |
| PolarLearn is a free and open-source learning program. In 0-PRERELEASE-15 and earlier, POST /api/v1/auth/sign-in creates a valid session for banned accounts before verifying the supplied password. That session is then accepted across authenticated /api routes, enabling account data access and authenticated actions as the banned user. |
| The PeproDev Ultimate Invoice WordPress plugin through 2.2.5 has a bulk download invoices action that generates ZIP archives containing exported invoice PDFs. The ZIP files are named predictably making it possible to brute force and retreive PII. |
| The Order Notification for WooCommerce WordPress plugin before 3.6.3 overrides WooCommerce's permission checks to grant full access to all unauthenticated requests, enabling complete read/write access to store resources like products, coupons, and customers. |
| An authentication bypass vulnerability in Google Cloud Dialogflow CX Messenger allowed unauthenticated users to interact with restricted chat agents, gaining access to the agents' knowledge and the ability to trigger their intents, by manipulating initialization parameters or crafting specific API requests.
All versions after August 20th, 2025 have been updated to protect from this vulnerability. No user action is required for this. |
| Ratify is a verification engine as a binary executable and on Kubernetes which enables verification of artifact security metadata and admits for deployment only those that comply with policies the user creates. In a Kubernetes environment, Ratify can be configured to authenticate to a private Azure Container Registry (ACR). The Azure workload identity and Azure managed identity authentication providers are configured in this setup. Users that configure a private ACR to be used with the Azure authentication providers may be impacted by a vulnerability that exists in versions prior to 1.2.3 and 1.3.2. Both Azure authentication providers attempt to exchange an Entra ID (EID) token for an ACR refresh token. However, Ratify’s Azure authentication providers did not verify that the target registry is an ACR. This could have led to the EID token being presented to a non-ACR registry during token exchange. EID tokens with ACR access can potentially be extracted and abused if a user workload contains an image reference to a malicious registry. As of versions 1.2.3 and 1.3.2, the Azure workload identity and Azure managed identity authentication providers are updated to add new validation prior to EID token exchange. Validation relies upon registry domain validation against a pre-configured list of well-known ACR endpoints. EID token exchange will be executed only if at least one of the configured well-known domain suffixes (wildcard support included) matches the registry domain of the image reference. |
| Scratch-Coding-Hut.github.io is the website for Coding Hut. The website as of 28 February 2025 contained a sign in with scratch username and password form. Any user who used the sign in page would be susceptible to any other user signing into their account. As of time of publication, a fix is not available but work on a fix is underway. As a workaround, users should avoid signing in. |
| FACTION is a PenTesting Report Generation and Collaboration Framework. Authentication is bypassed when an attacker registers a new user with admin privileges. This is possible at any time without any authorization. The request must follow the validation rules (no missing information, secure password, etc) but there are no other controls stopping them. This vulnerability is fixed in 1.4.3. |
| Finit is a fast init for Linux systems. Versions starting from 3.0-rc1 and prior to version 4.11 bundle an implementation of getty for the `tty` configuration directive that can bypass `/bin/login`, i.e., a user can log in as any user without authentication. This issue has been patched in version 4.11. |
| scratch-coding-hut.github.io is the website for Coding Hut. In 1.0-beta3 and earlier, the login link can be used to login to any account by changing the username in the username field. |
| CIE.AspNetCore.Authentication is an AspNetCore Remote Authenticator for CIE 3.0. Authentication using Spid and CIE is based on the SAML2 standard which provides two entities: 1. Identity Provider (IDP): the system that authenticates users and provides identity information (SAML affirmation) to the Service Provider, in essence, is responsible for the management of the credentials and identity of users; 2. Service Provider (SP): the system that provides a service to the user and relies on the Identity Provider to authenticate the user, receives SAML assertions from the IdP to grant access to resources. The library cie-aspnetcore refers to the second entity, the SP, and implements the validation logic of SAML assertions within SAML responses. In affected versions there is no guarantee that the first signature refers to the root object, it follows that if an attacker injects an item signed as the first element, all other signatures will not be verified. The only requirement is to have an XML element legitimately signed by the IdP, a condition that is easily met using the IdP's public metadata. An attacker could create an arbitrary SAML response that would be accepted by SPs using vulnerable SDKs, allowing him to impersonate any Spid and/or CIE user. This issue has been addressed in version 2.1.0 and all users are advised to upgrade. There are no known workarounds for this vulnerability. |
| SPID.AspNetCore.Authentication is an AspNetCore Remote Authenticator for SPID. Authentication using Spid and CIE is based on the SAML2 standard which provides two entities: Identity Provider (IDP): the system that authenticates users and provides identity information (SAML affirmation) to the Service Provider, in essence, is responsible for the management of the credentials and identity of users; Service Provider (SP): the system that provides a service to the user and relies on the Identity Provider to authenticate the user, receives SAML assertions from the IdP to grant access to resources. The validation logic of the signature is central as it ensures that you cannot create a SAML response with arbitrary assertions and then impersonate other users. There is no guarantee that the first signature refers to the root object, it follows that if an attacker injects an item signed as the first element, all other signatures will not be verified. The only requirement is to have an XML element legitimately signed by the IdP, a condition that is easily met using the IdP's public metadata. An attacker could create an arbitrary SAML response that would be accepted by SPs using vulnerable SDKs, allowing him to impersonate any Spid and/or CIE user. This vulnerability has been addressed in version 3.4.0 and all users are advised to upgrade. There are no known workarounds for this vulnerability. |
