| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A vulnerability was found in Netcore NR268 1.7.121109. This affects the function eval of the file dhcp_dynamicip_show.cgi of the component DHCP Handler. The manipulation of the argument Hostname results in cross site scripting. The attack may be launched remotely. The exploit has been made public and could be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| Frappe before 14.99.2 and 15.x before 15.86.0 contains an LDAP injection vulnerability because certain endpoints do not sanitize user-supplied parameters before using them in LDAP queries. Attackers can supply crafted LDAP filter syntax through these parameters to alter the resulting directory queries. |
| A weakness has been identified in Edimax BR-6208AC 1.32. Affected by this issue is some unknown functionality of the file /goform/formPortFw of the component Port Forwarding Page. Executing a manipulation can lead to cross site scripting. The attack may be performed from remote. The exploit has been made available to the public and could be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way. |
| A remote code execution (RCE) vulnerability in the management interface of Palo Alto Networks PAN-OS® software enables an authenticated attacker with network access to execute arbitrary code with root privileges on the firewall.
The security risk posed by this issue is minimized by restricting access to the management interface to only trusted internal IP addresses according to our recommended best practice deployment guidelines https://live.paloaltonetworks.com/t5/community-blogs/tips-amp-tricks-how-to-secure-the-management-access-of-your-palo/ba-p/464431 .
This issue is applicable to PAN-OS software on PA-Series and VM-Series firewalls and on Panorama (virtual and M-Series).
Cloud NGFW and Prisma® Access are not impacted by this vulnerability. |
| In the Linux kernel, the following vulnerability has been resolved:
s390/zcrypt: Pad trailing CCA or EP11 message with zeros
The both functions xcrb_msg_to_type6cprb_msgx() and
xcrb_msg_to_type6_ep11cprb_msgx() copy the user space message into a
kernel buffer based on the message length. But on further processing
the message is supposed to be 4 byte length adjusted. Thus up to 3
bytes of uninitialized kernel memory are forwarded to further
processing steps and may unwanted expose kernel memory to the crypto
card firmware.
This patch contains code to pad the gap between user space copied
message and message buffer length sent down to further processing of
the CCA or EP11 message to zeros. |
| In the Linux kernel, the following vulnerability has been resolved:
accel/amxdna: Fix page-insertion errors in amdxdna_insert_pages()
Two error paths in amdxdna_insert_pages() called vma->vm_ops->close(vma)
before returning an error code to the caller. This is incorrect:
amdxdna_gem_obj_mmap() registers an HMM interval notifier before calling
amdxdna_insert_pages(), and on a hard error it jumps to hmm_unreg to undo
that registration. Calling vm_ops->close() manually — which drops the
shmem pages_pin_count and the GEM object reference that backs the VMA —
before the mmap syscall has even returned causes those resources to be
released while the VMA is still alive. The kernel VMA teardown will call
vm_ops->close() a second time when the process later unmaps the range,
producing a reference count underflow.
Replace both hard-error returns with a deferred-fault approach that keeps
the VMA alive and retries page insertion through the HMM range-fault path. |
| The _.unset and _.omit functions in Lodash are vulnerable to prototype pollution. The fix for CVE-2025-13465 only guards against string key members, so an attacker can bypass the check by passing array-wrapped path segments. This allows deletion of properties from built-in prototypes such as Object.prototype, Number.prototype, and String.prototype. The issue permits deletion of prototype properties but does not allow overwriting their original behavior. The issue is patched from 4.18.0 to 4.18.1 depending on the package: lodash, lodash-es, and lodash-amd in 4.18.1, and the standalone lodash.unset and lodash.omit packages in 4.18.0. |
| The fix for CVE-2021-23337 added validation for the variable option in _.template but did not apply the same validation to options.imports key names, and both paths flow into the same Function() constructor sink. When an application passes untrusted input as options.imports key names, an attacker can inject default-parameter expressions that execute arbitrary code at template compilation time. Additionally, _.template uses assignInWith to merge imports, which enumerates inherited properties via for..in, so if Object.prototype has been polluted by another vector the polluted keys are copied into the imports object and passed to Function(). The issue is fixed in 4.18.1 for lodash, lodash-es, lodash-amd, and lodash.template. As a workaround, do not pass untrusted input as key names in options.imports; use only developer-controlled, static key names. |
| LibreNMS before 26.9.0 contains an LDAP filter injection in ldap-authorization and ad-authorization modes because usernames are inserted unescaped into LDAP search filters and authentication only checks user existence. When REMOTE_USER is not forwarded, unauthenticated attackers can send a wildcard username via HTTP Basic Authorization (PHP_AUTH_USER) to match all users and groups and gain admin access. |
| Adminer before 6.1.1 contains a remote code execution vulnerability that allows authenticated SQLite users to bypass ATTACH and VACUUM INTO restrictions by prefixing statements with a UTF-8 byte-order mark. Attackers can attach a database file at a PHP-served path and create a table named with PHP code to execute it as the web server user. |
| FreeRDP before 3.0.0 and 3.6.0 before 3.32.0 renders uninitialized heap memory from un-decoded progressive tiles because the tile->current buffer is allocated without zeroing. A malicious RDP server can send a crafted WBT_TILE_FIRST then WBT_TILE_UPGRADE sequence to paint heap bytes onscreen or abort the client process. |
| LogicalDOC Community Edition through 9.3 contains a server-side request forgery vulnerability in the default-enabled XMLConverter that fetches xml-stylesheet href URLs without scheme or host allowlisting. Authenticated users can upload XML documents whose stylesheet href points to internal http, ftp, file, or jar URLs, forcing server requests and applying attacker-controlled XSLT during conversion. |
| When `[migrations] ALLOWED_DOMAINS` was configured, a hostname matching the allow list was accepted without checking its resolved address against the local-network restrictions. A user who can start repository migrations and control the DNS of an allowed hostname could make it resolve to loopback or private addresses and bypass `ALLOW_LOCALNETWORKS = false`, reaching internal services from the Gitea server. Instances without `ALLOWED_DOMAINS` configured are not affected by this specific bypass. |
| Gitea's repository migration and pull mirror egress checks could be bypassed with a hostname that returns multiple DNS answers, because the address that was validated was not necessarily the address Git later connected to. A low-privileged user who can create migrations or mirrors could direct the server to internal services, reading from and writing to reachable internal Git or HTTP endpoints. Content from internal responses could additionally be disclosed through migration and mirror error messages. |
| Vulnerability in the OpenSSH GSSAPI delta included in various Linux distributions. This vulnerability affects the GSSAPI patches added by various Linux distributions and does not affect the OpenSSH upstream project itself. The usage of sshpkt_disconnect() on an error, which does not terminate the process, allows an attacker to send an unexpected GSSAPI message type during the GSSAPI key exchange to the server, which will call the underlying function and continue the execution of the program without setting the related connection variables. As the variables are not initialized to NULL the code later accesses those uninitialized variables, accessing random memory, which could lead to undefined behavior. The recommended workaround is to use ssh_packet_disconnect() instead, which does terminate the process. The impact of the vulnerability depends heavily on the compiler flag hardening configuration. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: server: fix active_num_conn leak on transport allocation failure
Commit 77ffbcac4e56 ("smb: server: fix leak of active_num_conn in
ksmbd_tcp_new_connection()") addressed the kthread_run() failure
path. The earlier alloc_transport() == NULL path in the same
function has the same leak, is reachable pre-authentication via any
TCP connect to port 445, and was empirically reproduced on UML
(ARCH=um, v7.0-rc7): a small number of forced allocation failures
were sufficient to put ksmbd into a state where every subsequent
connection attempt was rejected for the remainder of the boot.
ksmbd_kthread_fn() increments active_num_conn before calling
ksmbd_tcp_new_connection() and discards the return value, so when
alloc_transport() returns NULL the socket is released and -ENOMEM
returned without decrementing the counter. Each such failure
permanently consumes one slot from the max_connections pool; once
cumulative failures reach the cap, atomic_inc_return() hits the
threshold on every subsequent accept and every new connection is
rejected. The counter is only reset by module reload.
An unauthenticated remote attacker can drive the server toward the
memory pressure that makes alloc_transport() fail by holding open
connections with large RFC1002 lengths up to MAX_STREAM_PROT_LEN
(0x00FFFFFF); natural transient allocation failures on a loaded
host produce the same drift more slowly.
Mirror the existing rollback pattern in ksmbd_kthread_fn(): on the
alloc_transport() failure path, decrement active_num_conn gated on
server_conf.max_connections.
Repro details: with the patch reverted, forced alloc_transport()
NULL returns leaked counter slots and subsequent connection
attempts -- including legitimate connects issued after the
forced-fail window had closed -- were all rejected with "Limit the
maximum number of connections". With this patch applied, the same
connect sequence produces no rejections and the counter cycles
cleanly between zero and one on every accept. |
| In the Linux kernel, the following vulnerability has been resolved:
nfc: llcp: add missing return after LLCP_CLOSED checks
In nfc_llcp_recv_hdlc() and nfc_llcp_recv_disc(), when the socket
state is LLCP_CLOSED, the code correctly calls release_sock() and
nfc_llcp_sock_put() but fails to return. Execution falls through to
the remainder of the function, which calls release_sock() and
nfc_llcp_sock_put() again. This results in a double release_sock()
and a refcount underflow via double nfc_llcp_sock_put(), leading to
a use-after-free.
Add the missing return statements after the LLCP_CLOSED branches
in both functions to prevent the fall-through. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: atmel-sha204a - Fix OOM ->tfm_count leak
If memory allocation fails, decrement ->tfm_count to avoid blocking
future reads. |
| In the Linux kernel, the following vulnerability has been resolved:
mptcp: pm: in-kernel: always mark signal+subflow endp as used
Syzkaller managed to find a combination of actions that was generating
this warning:
msk->pm.local_addr_used == 0
WARNING: net/mptcp/pm_kernel.c:1071 at __mark_subflow_endp_available net/mptcp/pm_kernel.c:1071 [inline], CPU#1: syz.2.17/961
WARNING: net/mptcp/pm_kernel.c:1071 at mptcp_nl_remove_subflow_and_signal_addr net/mptcp/pm_kernel.c:1103 [inline], CPU#1: syz.2.17/961
WARNING: net/mptcp/pm_kernel.c:1071 at mptcp_pm_nl_del_addr_doit+0x81d/0x8f0 net/mptcp/pm_kernel.c:1210, CPU#1: syz.2.17/961
Modules linked in:
CPU: 1 UID: 0 PID: 961 Comm: syz.2.17 Not tainted 6.19.0-08368-gfafda3b4b06b #22 PREEMPT(full)
Hardware name: QEMU Ubuntu 25.10 PC v2 (i440FX + PIIX, + 10.1 machine, 1996), BIOS 1.17.0-debian-1.17.0-1build1 04/01/2014
RIP: 0010:__mark_subflow_endp_available net/mptcp/pm_kernel.c:1071 [inline]
RIP: 0010:mptcp_nl_remove_subflow_and_signal_addr net/mptcp/pm_kernel.c:1103 [inline]
RIP: 0010:mptcp_pm_nl_del_addr_doit+0x81d/0x8f0 net/mptcp/pm_kernel.c:1210
Code: 89 c5 e8 46 30 6f fe e9 21 fd ff ff 49 83 ed 80 e8 38 30 6f fe 4c 89 ef be 03 00 00 00 e8 db 49 df fe eb ac e8 24 30 6f fe 90 <0f> 0b 90 e9 1d ff ff ff e8 16 30 6f fe eb 05 e8 0f 30 6f fe e8 9a
RSP: 0018:ffffc90001663880 EFLAGS: 00010293
RAX: ffffffff82de1a6c RBX: 0000000000000000 RCX: ffff88800722b500
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
RBP: ffff8880158b22d0 R08: 0000000000010425 R09: ffffffffffffffff
R10: ffffffff82de18ba R11: 0000000000000000 R12: ffff88800641a640
R13: ffff8880158b1880 R14: ffff88801ec3c900 R15: ffff88800641a650
FS: 00005555722c3500(0000) GS:ffff8880f909d000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f66346e0f60 CR3: 000000001607c000 CR4: 0000000000350ef0
Call Trace:
<TASK>
genl_family_rcv_msg_doit+0x117/0x180 net/netlink/genetlink.c:1115
genl_family_rcv_msg net/netlink/genetlink.c:1195 [inline]
genl_rcv_msg+0x3a8/0x3f0 net/netlink/genetlink.c:1210
netlink_rcv_skb+0x16d/0x240 net/netlink/af_netlink.c:2550
genl_rcv+0x28/0x40 net/netlink/genetlink.c:1219
netlink_unicast_kernel net/netlink/af_netlink.c:1318 [inline]
netlink_unicast+0x3e9/0x4c0 net/netlink/af_netlink.c:1344
netlink_sendmsg+0x4aa/0x5b0 net/netlink/af_netlink.c:1894
sock_sendmsg_nosec net/socket.c:727 [inline]
__sock_sendmsg+0xc9/0xf0 net/socket.c:742
____sys_sendmsg+0x272/0x3b0 net/socket.c:2592
___sys_sendmsg+0x2de/0x320 net/socket.c:2646
__sys_sendmsg net/socket.c:2678 [inline]
__do_sys_sendmsg net/socket.c:2683 [inline]
__se_sys_sendmsg net/socket.c:2681 [inline]
__x64_sys_sendmsg+0x110/0x1a0 net/socket.c:2681
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0x143/0x440 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7f66346f826d
Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 e8 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007ffc83d8bdc8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 00007f6634985fa0 RCX: 00007f66346f826d
RDX: 00000000040000b0 RSI: 0000200000000740 RDI: 0000000000000007
RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00007f6634985fa8
R13: 00007f6634985fac R14: 0000000000000000 R15: 0000000000001770
</TASK>
The actions that caused that seem to be:
- Set the MPTCP subflows limit to 0
- Create an MPTCP endpoint with both the 'signal' and 'subflow' flags
- Create a new MPTCP connection from a different address: an ADD_ADDR
linked to the MPTCP endpoint will be sent ('signal' flag), but no
subflows is initiated ('subflow' flag)
- Remove the MPTCP endpoint
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
nfc: pn533: properly drop the usb interface reference on disconnect
When the device is disconnected from the driver, there is a "dangling"
reference count on the usb interface that was grabbed in the probe
callback. Fix this up by properly dropping the reference after we are
done with it. |
