| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| When a server in pgAdmin 4 had no password file, client certificate or client key configured, or the configured one could not be found, pgAdmin left the parameter out of the connection and libpq fell back to the defaults of the operating-system account running pgAdmin: ~/.pgpass, ~/.postgresql/postgresql.crt and postgresql.key, or PGPASSFILE, PGSSLCERT and PGSSLKEY. In server mode any user could therefore connect to a server with the service account's saved passwords or client certificate, and supplying only a copy of its public certificate was enough for libpq to pair it with the service account's private key. A pg_service.conf entry, or a maintenance database name read as a connection string by pg_dumpall, could bring the same files back for the utilities.
The fix gives each of these parameters a value in server mode, the user's own file or otherwise a path that can never be opened, in the connection string, in the environment of the utilities and in the --dbname connection string that ranks above a service entry. Desktop mode is unchanged.
This issue affects pgAdmin 4: before 9.19. |
| When a pgAdmin 4 connection was not meant to use a Kerberos user's delegated credentials, pgAdmin removed KRB5CCNAME from its environment, so the Kerberos library fell back to the default credential cache, or a client keytab, of the operating-system account running pgAdmin. libpq then answered any server that asked for GSSAPI authentication with that account's ticket, whatever user name the pgAdmin user gave, so in server mode any user could connect as the service account's Kerberos principal; gssencmode=disable did not prevent it. On Windows, SSPI used the service account's logon in the same way. psql was also started with pgAdmin's environment, which could hold another user's credential cache while that user was connecting.
The fix points KRB5CCNAME and KRB5_CLIENT_KTNAME at a file that cannot exist except while a Kerberos-authenticated user connects with Kerberos, and gives every other connection, psql and the utilities require_auth=!gss,!sspi and gssencmode=disable, checked on the final connection string. require_auth needs libpq 16 or later.
This issue affects pgAdmin 4: before 9.19. |
| pgAdmin 4 opens SSH tunnels with the sshtunnel library but gave it neither host_pkey_directories nor ssh_config_file, so it always loaded the unencrypted private keys in ~/.ssh of the operating-system account running pgAdmin, read that account's ~/.ssh/config (IdentityFile, User, HostName, ProxyCommand) for the tunnel host, and could use its ssh-agent. In server mode any user could therefore configure a tunnel to a host that accepts the service account's key, with no credentials of their own or with an identity file that did not exist in their storage, and reach it as that account.
The fix makes tunnels in server mode use only the identity file or password the user configured: the service account's keys, configuration and agent are no longer used, and an identity file that cannot be found in the user's storage is reported instead of falling back to ~/.ssh. Desktop mode is unchanged.
This issue affects pgAdmin 4: before 9.19. |
| pgAdmin 4's Import/Export Data tool wraps a user's query export in a psql \copy (...) TO command and checks that the query's parentheses are balanced so that nothing can escape the wrapper. The check rejected a backslash inside a single-quoted string, but not inside a double-quoted identifier, where it treated the next double quote as closing the identifier. psql's \copy parser applies the connection's escape character to whichever quote opened a token, so with standard_conforming_strings off a backslash-escaped double quote does not close the identifier. pgAdmin's and psql's view of the quoting then diverged, a closing parenthesis hidden from the check ended the \copy (...) wrapper, and a following TO PROGRAM clause was executed by psql on the pgAdmin host, as the operating-system account running pgAdmin, before the server rejected the statement. An ordinary database role can turn standard_conforming_strings off for itself, and the Import/Export Data permission is granted to non-administrators by default.
This is a bypass of the fix for CVE-2026-17566. The fix rejects any backslash inside a double-quoted identifier, as was already done for single-quoted strings, since its meaning depends on a server setting that cannot be known reliably when the query is validated.
This issue affects pgAdmin 4: before 9.19. |
| In multiple functions of PduParser.java, there is a possible persistent denial of service due to a missing bounds check. This could lead to remote denial of service with no additional execution privileges needed. User interaction is not needed for exploitation. |
| In multiple locations, there is a possible out of bounds write due to an incorrect bounds check. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_tables: reject immediate NF_QUEUE verdict
nft_queue is always used from userspace nftables to deliver the NF_QUEUE
verdict. Immediately emitting an NF_QUEUE verdict is never used by the
userspace nft tools, so reject immediate NF_QUEUE verdicts.
The arp family does not provide queue support, but such an immediate
verdict is still reachable. Globally reject NF_QUEUE immediate verdicts
to address this issue. |
| WebDyne versions from 2.022 before 3.022 for Perl disclose application source to unauthenticated clients via the viewer in the default index page.
WebDyne's wrapper scripts, such as webdyne.psgi, enable the built-in index page by default. Its source viewer returns files under the document root named in the source parameter of an HTMX request, including .psp, .pm and .pl files.
A remote attacker can read the application's Perl code, including the __PERL__ blocks of .psp pages and any credentials they hold. |
| Improper encoding or escaping of output in Apache Wicket.
org.apache.wicket.core.util.string.JavaScriptUtils#escapeQuotes() replaces each single quote in its input with a backslash and a single quote, and each double quote with a backslash and a double quote, so that the value can be placed inside a JavaScript string literal. It does not escape the backslash, which is the character that has to be escaped, and escaped first, for the rest of that escaping to hold. A value that already holds a backslash immediately before a quote therefore ends up with two backslashes in front of that quote: the first escapes the second, the quote itself is left unescaped, and it closes the literal. Whatever the value carries after that point is no longer text but JavaScript, and it runs in the application's origin and in the session of the user looking at the page. The method is public, is not deprecated, and its documentation states that its result can be part of a JavaScript call such as an alert; the only limitation it notes concerns JSON values, which need different escaping.
An application is affected wherever it calls the method itself and places the result inside a JavaScript string literal, from its own code or from a component of its own or of a third party, and the value it escapes holds data an attacker can influence. There is no further condition, and no component of Wicket has to be involved: the application is using the method for what its documentation offers, and the method does not deliver it.
Two components shipped with Wicket Extensions pass a value through the method. org.apache.wicket.extensions.ajax.markup.html.AjaxEditableLabel writes the editor's first error feedback message into a single-quoted JavaScript string literal in the Ajax response, so an application is affected through that component where the message shown for a failed edit holds data an attacker can influence, whether that is the submitted value itself or another variable the application sets on the validation error. A validation message can carry the submitted value, because input is a message variable that every form component supplies for its own validation errors, and the documentation shows overriding a validator's message to include it; none of the message bundles shipped with Wicket interpolates it, so an application that has not written such a message is not affected through this component. org.apache.wicket.extensions.ajax.markup.html.repeater.AjaxListPanel passes the serialized markup tag of an appended component through the method and is not affected: the tag comes from the panel's own markup file, and a quote in any of its attribute values, the component's markup id included, is written as a character reference by the tag serialization and cannot close the literal.
This issue affects Apache Wicket: from 8.0.0 through 8.19.0, from 9.0.0 through 9.24.0, from 10.0.0 through 10.11.0. Users of Apache Wicket 7.x or older, which are no longer supported, should upgrade to a supported version.
Users are recommended to upgrade to version 8.20.0, 9.25.0 or 10.12.0, which fix the issue. |
| A Kafka broker that authenticates clients with SASL/OAUTHBEARER using the bundled JWKS-backed validator always verifies the JWT signature, but two further checks are only performed when explicitly configured:
- The issuer (iss) claim is verified only when sasl.oauthbearer.expected.issuer is set. When it is unset, a validly-signed token carrying the expected audience is accepted regardless of which issuer minted it.
- An audience (aud) claim is required only when sasl.oauthbearer.expected.audience is set. When it is unset, a validly-signed token that omits the aud claim is accepted. (A token that carries an aud claim is
still rejected when no expected audience is configured.)
Both options default to unset and have been documented as optional (Importance LOW) since KIP-768 (3.1.0).
Impact:
The exposure is realizable mainly in deployments whose JWKS endpoint serves signing keys for more than one issuer (a multi-tenant identity provider, an aggregated/shared JWKS, or shared signing keys): a token
minted for a different issuer, or a token lacking an audience, may be accepted to authenticate — potentially as a higher-privileged principal. In a single-issuer deployment where the provider controls the iss
claim and issues audience-scoped tokens, exposure is limited. The signature trust anchor remains enforced in all cases. This is distinct from CVE-2026-33557 (acceptance of unsigned/unvalidated tokens); here the
signature is validated and only the issuer/audience checks are not enforced by default.
Mitigation (all affected versions, no upgrade required):
Set both sasl.oauthbearer.expected.issuer (to your provider's exact iss value) and sasl.oauthbearer.expected.audience (to the audience(s) your brokers expect), per listener. Brokers that set these perform
exact-match issuer/audience checks and are not affected. Both have been available since 3.1.0.
Resolution:
- From Apache Kafka 4.4.0: a broker configured with a JWKS endpoint fails to start unless both sasl.oauthbearer.expected.issuer and sasl.oauthbearer.expected.audience are set (secure by default). Deployments that
intentionally do not restrict the issuer and/or audience may opt out per axis with sasl.oauthbearer.allow.unverified.issuer=true and/or sasl.oauthbearer.allow.unverified.audience=true. |
| In the Linux kernel, the following vulnerability has been resolved:
audit: add missing syscalls to read class
The "at" variant of getxattr() and listxattr() are missing from the
audit read class. Calling getxattrat() or listxattrat() on a file to
read its extended attributes will bypass audit rules such as:
-w /tmp/test -p rwa -k test_rwa
The current patch adds missing syscalls to the audit read class. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf, test_run: Subtract size of xdp_frame from allowed metadata size
The xdp_frame structure takes up part of the XDP frame headroom,
limiting the size of the metadata. However, in bpf_test_run, we don't
take this into account, which makes it possible for userspace to supply
a metadata size that is too large (taking up the entire headroom).
If userspace supplies such a large metadata size in live packet mode,
the xdp_update_frame_from_buff() call in xdp_test_run_init_page() call
will fail, after which packet transmission proceeds with an
uninitialised frame structure, leading to the usual Bad Stuff.
The commit in the Fixes tag fixed a related bug where the second check
in xdp_update_frame_from_buff() could fail, but did not add any
additional constraints on the metadata size. Complete the fix by adding
an additional check on the metadata size. Reorder the checks slightly to
make the logic clearer and add a comment. |
| In the Linux kernel, the following vulnerability has been resolved:
pmdomain: imx8m-blk-ctrl: Remove separate rst and clk mask for 8mq vpu
For i.MX8MQ platform, the ADB in the VPUMIX domain has no separate reset
and clock enable bits, but is ungated and reset together with the VPUs.
So we can't reset G1 or G2 separately, it may led to the system hang.
Remove rst_mask and clk_mask of imx8mq_vpu_blk_ctl_domain_data.
Let imx8mq_vpu_power_notifier() do really vpu reset. |
| The issue was addressed with improved memory handling. This issue is fixed in macOS Golden Gate 27.2, macOS Sequoia 15.8.2, macOS Tahoe 26.7.2. An app may be able to cause unexpected system termination or corrupt kernel memory. |
| A vulnerability has been found in OpenPPL ppl.nn up to bb84dc9952809b3a5a0036858a3d9f68af1c83d5. The affected element is the function OptGraph::InitQuantization of the file src/ppl/nn/engines/cuda/optimizer/opt_graph.cc of the component CUDA Optimizer. Such manipulation of the argument per_channel/bit_width/tensor_max/tensor_min/scale leads to out-of-bounds read. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. This product does not use versioning. This is why information about affected and unaffected releases are unavailable. The project was informed of the problem early through an issue report but has not responded yet. |
| MIME::Parser versions before 5.521 for Perl set no limit on the number of message parts by default, allowing memory exhaustion.
The max_parts option defaulted to -1, which disables the limit, so a parser created with default settings builds an entity for every part however many a message has.
Version 5.521 sets max_parts to 1000 and max_depth to 64 by default. Setting either to -1 still removes the limit. |
| MIME::Field::ParamVal versions before 5.521 for Perl do not flag a duplicate boundary parameter whose name contains a nested comment.
A parameter written boundary((c))="A" or boundary(\))="A" is stored under that literal name rather than as boundary. A second boundary parameter is then not reported as a duplicate, and MIME::Parser splits the message on it.
Readers that skip comments as RFC 5322 allows take the first boundary instead. A remote sender can hide an attachment from a filter that relies on ambiguous_content() while the recipient's mail client shows it. |
| MIME::Field::ParamVal versions before 5.521 for Perl turn an RFC 2231 filename with a hyphenated language tag into an empty recommended filename.
A parameter such as filename*=utf-8'en-US'payload.exe is converted to an encoded word with the language tag appended to the charset. The decoder strips the language suffix only when it is a single word, so it cannot resolve the charset UTF-8*EN-US and returns an empty string. The recommended_filename() method returns that empty string rather than falling back to the name parameter.
Other mail readers return payload.exe. A remote sender can get an attachment past a policy that checks file extensions on the recommended filename. |
| MIME::Head versions from 5.518 before 5.521 for Perl decode a partly encoded multipart boundary without flagging the parse as ambiguous.
The multipart_boundary() method decodes RFC 2047 encoded words anywhere in the boundary, but the ambiguity check only fires when the whole value is one encoded word. A boundary such as abc=?us-ascii?Q?def?= is used as abcdef, and ambiguous_content() returns false.
Encoded words are not allowed in parameters, so other mail readers split the message on the literal value. A remote sender can hide an attachment from a filter that relies on ambiguous_content() while the recipient's mail client shows it. |
| Initialization of a resource with an insecure default vulnerability in OpenText Advanced Authentication Server allows Excessive Allocation.
This issue affects Advanced Authentication Server: from 6.4.0.0 through 6.4.3.x, from 6.5.0.0 through 6.5.0.x, and from 6.6.0.0 through 6.6.1.0.
The fix for this is issue is to create a secure configuration. The 6.6.2.0 release has a best practice entry if the configuration is unsecure.
A secure configuration is to NOT allow creation/recreation of Unauthenticated Endpoints. If creation/recreation of Unauthenticated Endpoints is required, you should only allow it from trusted networks.
To remedy this issue, change your configuration to NOT allow creation/recreation of Unauthenticated Endpoints. If you require Unauthenticated Endpoints, you MUST change your configuration to use a non-empty whitelist to specify the trusted networks. An empty whitelist will allow all networks to create/recreate endpoints. |
