| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: s390: fix validity interception issue when gisa is switched off
We might run into a SIE validity if gisa has been disabled either via using
kernel parameter "kvm.use_gisa=0" or by setting the related sysfs
attribute to N (echo N >/sys/module/kvm/parameters/use_gisa).
The validity is caused by an invalid value in the SIE control block's
gisa designation. That happens because we pass the uninitialized gisa
origin to virt_to_phys() before writing it to the gisa designation.
To fix this we return 0 in kvm_s390_get_gisa_desc() if the origin is 0.
kvm_s390_get_gisa_desc() is used to determine which gisa designation to
set in the SIE control block. A value of 0 in the gisa designation disables
gisa usage.
The issue surfaces in the host kernel with the following kernel message as
soon a new kvm guest start is attemted.
kvm: unhandled validity intercept 0x1011
WARNING: CPU: 0 PID: 781237 at arch/s390/kvm/intercept.c:101 kvm_handle_sie_intercept+0x42e/0x4d0 [kvm]
Modules linked in: vhost_net tap tun xt_CHECKSUM xt_MASQUERADE xt_conntrack ipt_REJECT xt_tcpudp nft_compat x_tables nf_nat_tftp nf_conntrack_tftp vfio_pci_core irqbypass vhost_vsock vmw_vsock_virtio_transport_common vsock vhost vhost_iotlb kvm nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 nft_fib nft_reject_inet nf_reject_ipv4 nf_reject_ipv6 nft_reject nft_ct nft_chain_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 ip_set nf_tables sunrpc mlx5_ib ib_uverbs ib_core mlx5_core uvdevice s390_trng eadm_sch vfio_ccw zcrypt_cex4 mdev vfio_iommu_type1 vfio sch_fq_codel drm i2c_core loop drm_panel_orientation_quirks configfs nfnetlink lcs ctcm fsm dm_service_time ghash_s390 prng chacha_s390 libchacha aes_s390 des_s390 libdes sha3_512_s390 sha3_256_s390 sha512_s390 sha256_s390 sha1_s390 sha_common dm_mirror dm_region_hash dm_log zfcp scsi_transport_fc scsi_dh_rdac scsi_dh_emc scsi_dh_alua pkey zcrypt dm_multipath rng_core autofs4 [last unloaded: vfio_pci]
CPU: 0 PID: 781237 Comm: CPU 0/KVM Not tainted 6.10.0-08682-gcad9f11498ea #6
Hardware name: IBM 3931 A01 701 (LPAR)
Krnl PSW : 0704c00180000000 000003d93deb0122 (kvm_handle_sie_intercept+0x432/0x4d0 [kvm])
R:0 T:1 IO:1 EX:1 Key:0 M:1 W:0 P:0 AS:3 CC:0 PM:0 RI:0 EA:3
Krnl GPRS: 000003d900000027 000003d900000023 0000000000000028 000002cd00000000
000002d063a00900 00000359c6daf708 00000000000bebb5 0000000000001eff
000002cfd82e9000 000002cfd80bc000 0000000000001011 000003d93deda412
000003ff8962df98 000003d93de77ce0 000003d93deb011e 00000359c6daf960
Krnl Code: 000003d93deb0112: c020fffe7259 larl %r2,000003d93de7e5c4
000003d93deb0118: c0e53fa8beac brasl %r14,000003d9bd3c7e70
#000003d93deb011e: af000000 mc 0,0
>000003d93deb0122: a728ffea lhi %r2,-22
000003d93deb0126: a7f4fe24 brc 15,000003d93deafd6e
000003d93deb012a: 9101f0b0 tm 176(%r15),1
000003d93deb012e: a774fe48 brc 7,000003d93deafdbe
000003d93deb0132: 40a0f0ae sth %r10,174(%r15)
Call Trace:
[<000003d93deb0122>] kvm_handle_sie_intercept+0x432/0x4d0 [kvm]
([<000003d93deb011e>] kvm_handle_sie_intercept+0x42e/0x4d0 [kvm])
[<000003d93deacc10>] vcpu_post_run+0x1d0/0x3b0 [kvm]
[<000003d93deaceda>] __vcpu_run+0xea/0x2d0 [kvm]
[<000003d93dead9da>] kvm_arch_vcpu_ioctl_run+0x16a/0x430 [kvm]
[<000003d93de93ee0>] kvm_vcpu_ioctl+0x190/0x7c0 [kvm]
[<000003d9bd728b4e>] vfs_ioctl+0x2e/0x70
[<000003d9bd72a092>] __s390x_sys_ioctl+0xc2/0xd0
[<000003d9be0e9222>] __do_syscall+0x1f2/0x2e0
[<000003d9be0f9a90>] system_call+0x70/0x98
Last Breaking-Event-Address:
[<000003d9bd3c7f58>] __warn_printk+0xe8/0xf0 |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: mxs-dcp - Ensure payload is zero when using key slot
We could leak stack memory through the payload field when running
AES with a key from one of the hardware's key slots. Fix this by
ensuring the payload field is set to 0 in such cases.
This does not affect the common use case when the key is supplied
from main memory via the descriptor payload. |
| In the Linux kernel, the following vulnerability has been resolved:
mmc: sdhci: Fix max_seg_size for 64KiB PAGE_SIZE
blk_queue_max_segment_size() ensured:
if (max_size < PAGE_SIZE)
max_size = PAGE_SIZE;
whereas:
blk_validate_limits() makes it an error:
if (WARN_ON_ONCE(lim->max_segment_size < PAGE_SIZE))
return -EINVAL;
The change from one to the other, exposed sdhci which was setting maximum
segment size too low in some circumstances.
Fix the maximum segment size when it is too low. |
| In the Linux kernel, the following vulnerability has been resolved:
vfio/pci: Init the count variable in collecting hot-reset devices
The count variable is used without initialization, it results in mistakes
in the device counting and crashes the userspace if the get hot reset info
path is triggered. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: temperature: mlx90635: Fix ERR_PTR dereference in mlx90635_probe()
When devm_regmap_init_i2c() fails, regmap_ee could be error pointer,
instead of checking for IS_ERR(regmap_ee), regmap is checked which looks
like a copy paste error. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/nouveau: don't attempt to schedule hpd_work on headless cards
If the card doesn't have display hardware, hpd_work and hpd_lock are
left uninitialized which causes BUG when attempting to schedule hpd_work
on runtime PM resume.
Fix it by adding headless flag to DRM and skip any hpd if it's set. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: carl9170: re-fix fortified-memset warning
The carl9170_tx_release() function sometimes triggers a fortified-memset
warning in my randconfig builds:
In file included from include/linux/string.h:254,
from drivers/net/wireless/ath/carl9170/tx.c:40:
In function 'fortify_memset_chk',
inlined from 'carl9170_tx_release' at drivers/net/wireless/ath/carl9170/tx.c:283:2,
inlined from 'kref_put' at include/linux/kref.h:65:3,
inlined from 'carl9170_tx_put_skb' at drivers/net/wireless/ath/carl9170/tx.c:342:9:
include/linux/fortify-string.h:493:25: error: call to '__write_overflow_field' declared with attribute warning: detected write beyond size of field (1st parameter); maybe use struct_group()? [-Werror=attribute-warning]
493 | __write_overflow_field(p_size_field, size);
Kees previously tried to avoid this by using memset_after(), but it seems
this does not fully address the problem. I noticed that the memset_after()
here is done on a different part of the union (status) than the original
cast was from (rate_driver_data), which may confuse the compiler.
Unfortunately, the memset_after() trick does not work on driver_rates[]
because that is part of an anonymous struct, and I could not get
struct_group() to do this either. Using two separate memset() calls
on the two members does address the warning though. |
| In the Linux kernel, the following vulnerability has been resolved:
workqueue: Fix selection of wake_cpu in kick_pool()
With cpu_possible_mask=0-63 and cpu_online_mask=0-7 the following
kernel oops was observed:
smp: Bringing up secondary CPUs ...
smp: Brought up 1 node, 8 CPUs
Unable to handle kernel pointer dereference in virtual kernel address space
Failing address: 0000000000000000 TEID: 0000000000000803
[..]
Call Trace:
arch_vcpu_is_preempted+0x12/0x80
select_idle_sibling+0x42/0x560
select_task_rq_fair+0x29a/0x3b0
try_to_wake_up+0x38e/0x6e0
kick_pool+0xa4/0x198
__queue_work.part.0+0x2bc/0x3a8
call_timer_fn+0x36/0x160
__run_timers+0x1e2/0x328
__run_timer_base+0x5a/0x88
run_timer_softirq+0x40/0x78
__do_softirq+0x118/0x388
irq_exit_rcu+0xc0/0xd8
do_ext_irq+0xae/0x168
ext_int_handler+0xbe/0xf0
psw_idle_exit+0x0/0xc
default_idle_call+0x3c/0x110
do_idle+0xd4/0x158
cpu_startup_entry+0x40/0x48
rest_init+0xc6/0xc8
start_kernel+0x3c4/0x5e0
startup_continue+0x3c/0x50
The crash is caused by calling arch_vcpu_is_preempted() for an offline
CPU. To avoid this, select the cpu with cpumask_any_and_distribute()
to mask __pod_cpumask with cpu_online_mask. In case no cpu is left in
the pool, skip the assignment.
tj: This doesn't fully fix the bug as CPUs can still go down between picking
the target CPU and the wake call. Fixing that likely requires adding
cpu_online() test to either the sched or s390 arch code. However, regardless
of how that is fixed, workqueue shouldn't be picking a CPU which isn't
online as that would result in unpredictable and worse behavior. |
| In the Linux kernel, the following vulnerability has been resolved:
dmaengine: fsl-qdma: init irq after reg initialization
Initialize the qDMA irqs after the registers are configured so that
interrupts that may have been pending from a primary kernel don't get
processed by the irq handler before it is ready to and cause panic with
the following trace:
Call trace:
fsl_qdma_queue_handler+0xf8/0x3e8
__handle_irq_event_percpu+0x78/0x2b0
handle_irq_event_percpu+0x1c/0x68
handle_irq_event+0x44/0x78
handle_fasteoi_irq+0xc8/0x178
generic_handle_irq+0x24/0x38
__handle_domain_irq+0x90/0x100
gic_handle_irq+0x5c/0xb8
el1_irq+0xb8/0x180
_raw_spin_unlock_irqrestore+0x14/0x40
__setup_irq+0x4bc/0x798
request_threaded_irq+0xd8/0x190
devm_request_threaded_irq+0x74/0xe8
fsl_qdma_probe+0x4d4/0xca8
platform_drv_probe+0x50/0xa0
really_probe+0xe0/0x3f8
driver_probe_device+0x64/0x130
device_driver_attach+0x6c/0x78
__driver_attach+0xbc/0x158
bus_for_each_dev+0x5c/0x98
driver_attach+0x20/0x28
bus_add_driver+0x158/0x220
driver_register+0x60/0x110
__platform_driver_register+0x44/0x50
fsl_qdma_driver_init+0x18/0x20
do_one_initcall+0x48/0x258
kernel_init_freeable+0x1a4/0x23c
kernel_init+0x10/0xf8
ret_from_fork+0x10/0x18 |
| In the Linux kernel, the following vulnerability has been resolved:
dmaengine: idxd: Ensure safe user copy of completion record
If CONFIG_HARDENED_USERCOPY is enabled, copying completion record from
event log cache to user triggers a kernel bug.
[ 1987.159822] usercopy: Kernel memory exposure attempt detected from SLUB object 'dsa0' (offset 74, size 31)!
[ 1987.170845] ------------[ cut here ]------------
[ 1987.176086] kernel BUG at mm/usercopy.c:102!
[ 1987.180946] invalid opcode: 0000 [#1] PREEMPT SMP NOPTI
[ 1987.186866] CPU: 17 PID: 528 Comm: kworker/17:1 Not tainted 6.8.0-rc2+ #5
[ 1987.194537] Hardware name: Intel Corporation AvenueCity/AvenueCity, BIOS BHSDCRB1.86B.2492.D03.2307181620 07/18/2023
[ 1987.206405] Workqueue: wq0.0 idxd_evl_fault_work [idxd]
[ 1987.212338] RIP: 0010:usercopy_abort+0x72/0x90
[ 1987.217381] Code: 58 65 9c 50 48 c7 c2 17 85 61 9c 57 48 c7 c7 98 fd 6b 9c 48 0f 44 d6 48 c7 c6 b3 08 62 9c 4c 89 d1 49 0f 44 f3 e8 1e 2e d5 ff <0f> 0b 49 c7 c1 9e 42 61 9c 4c 89 cf 4d 89 c8 eb a9 66 66 2e 0f 1f
[ 1987.238505] RSP: 0018:ff62f5cf20607d60 EFLAGS: 00010246
[ 1987.244423] RAX: 000000000000005f RBX: 000000000000001f RCX: 0000000000000000
[ 1987.252480] RDX: 0000000000000000 RSI: ffffffff9c61429e RDI: 00000000ffffffff
[ 1987.260538] RBP: ff62f5cf20607d78 R08: ff2a6a89ef3fffe8 R09: 00000000fffeffff
[ 1987.268595] R10: ff2a6a89eed00000 R11: 0000000000000003 R12: ff2a66934849c89a
[ 1987.276652] R13: 0000000000000001 R14: ff2a66934849c8b9 R15: ff2a66934849c899
[ 1987.284710] FS: 0000000000000000(0000) GS:ff2a66b22fe40000(0000) knlGS:0000000000000000
[ 1987.293850] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 1987.300355] CR2: 00007fe291a37000 CR3: 000000010fbd4005 CR4: 0000000000f71ef0
[ 1987.308413] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 1987.316470] DR3: 0000000000000000 DR6: 00000000fffe07f0 DR7: 0000000000000400
[ 1987.324527] PKRU: 55555554
[ 1987.327622] Call Trace:
[ 1987.330424] <TASK>
[ 1987.332826] ? show_regs+0x6e/0x80
[ 1987.336703] ? die+0x3c/0xa0
[ 1987.339988] ? do_trap+0xd4/0xf0
[ 1987.343662] ? do_error_trap+0x75/0xa0
[ 1987.347922] ? usercopy_abort+0x72/0x90
[ 1987.352277] ? exc_invalid_op+0x57/0x80
[ 1987.356634] ? usercopy_abort+0x72/0x90
[ 1987.360988] ? asm_exc_invalid_op+0x1f/0x30
[ 1987.365734] ? usercopy_abort+0x72/0x90
[ 1987.370088] __check_heap_object+0xb7/0xd0
[ 1987.374739] __check_object_size+0x175/0x2d0
[ 1987.379588] idxd_copy_cr+0xa9/0x130 [idxd]
[ 1987.384341] idxd_evl_fault_work+0x127/0x390 [idxd]
[ 1987.389878] process_one_work+0x13e/0x300
[ 1987.394435] ? __pfx_worker_thread+0x10/0x10
[ 1987.399284] worker_thread+0x2f7/0x420
[ 1987.403544] ? _raw_spin_unlock_irqrestore+0x2b/0x50
[ 1987.409171] ? __pfx_worker_thread+0x10/0x10
[ 1987.414019] kthread+0x107/0x140
[ 1987.417693] ? __pfx_kthread+0x10/0x10
[ 1987.421954] ret_from_fork+0x3d/0x60
[ 1987.426019] ? __pfx_kthread+0x10/0x10
[ 1987.430281] ret_from_fork_asm+0x1b/0x30
[ 1987.434744] </TASK>
The issue arises because event log cache is created using
kmem_cache_create() which is not suitable for user copy.
Fix the issue by creating event log cache with
kmem_cache_create_usercopy(), ensuring safe user copy. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: adc: ad4130: zero-initialize clock init data
The clk_init_data struct does not have all its members
initialized, causing issues when trying to expose the internal
clock on the CLK pin.
Fix this by zero-initializing the clk_init_data struct. |
| In the Linux kernel, the following vulnerability has been resolved:
parisc: BTLB: Fix crash when setting up BTLB at CPU bringup
When using hotplug and bringing up a 32-bit CPU, ask the firmware about the
BTLB information to set up the static (block) TLB entries.
For that write access to the static btlb_info struct is needed, but
since it is marked __ro_after_init the kernel segfaults with missing
write permissions.
Fix the crash by dropping the __ro_after_init annotation. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: iwlwifi: mvm: fix a crash when we run out of stations
A DoS tool that injects loads of authentication frames made our AP
crash. The iwl_mvm_is_dup() function couldn't find the per-queue
dup_data which was not allocated.
The root cause for that is that we ran out of stations in the firmware
and we didn't really add the station to the firmware, yet we didn't
return an error to mac80211.
Mac80211 was thinking that we have the station and because of that,
sta_info::uploaded was set to 1. This allowed
ieee80211_find_sta_by_ifaddr() to return a valid station object, but
that ieee80211_sta didn't have any iwl_mvm_sta object initialized and
that caused the crash mentioned earlier when we got Rx on that station. |
| In the Linux kernel, the following vulnerability has been resolved:
net: stmmac: xgmac: fix handling of DPP safety error for DMA channels
Commit 56e58d6c8a56 ("net: stmmac: Implement Safety Features in
XGMAC core") checks and reports safety errors, but leaves the
Data Path Parity Errors for each channel in DMA unhandled at all, lead to
a storm of interrupt.
Fix it by checking and clearing the DMA_DPP_Interrupt_Status register. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: cfg80211: detect stuck ECSA element in probe resp
We recently added some validation that we don't try to
connect to an AP that is currently in a channel switch
process, since that might want the channel to be quiet
or we might not be able to connect in time to hear the
switching in a beacon. This was in commit c09c4f31998b
("wifi: mac80211: don't connect to an AP while it's in
a CSA process").
However, we promptly got a report that this caused new
connection failures, and it turns out that the AP that
we now cannot connect to is permanently advertising an
extended channel switch announcement, even with quiet.
The AP in question was an Asus RT-AC53, with firmware
3.0.0.4.380_10760-g21a5898.
As a first step, attempt to detect that we're dealing
with such a situation, so mac80211 can use this later. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: improve CSA/ECSA connection refusal
As mentioned in the previous commit, we pretty quickly found
that some APs have ECSA elements stuck in their probe response,
so using that to not attempt to connect while CSA is happening
we never connect to such an AP.
Improve this situation by checking more carefully and ignoring
the ECSA if cfg80211 has previously detected the ECSA element
being stuck in the probe response.
Additionally, allow connecting to an AP that's switching to a
channel it's already using, unless it's using quiet mode. In
this case, we may just have to adjust bandwidth later. If it's
actually switching channels, it's better not to try to connect
in the middle of that. |
| In the Linux kernel, the following vulnerability has been resolved:
x86/lib: Revert to _ASM_EXTABLE_UA() for {get,put}_user() fixups
During memory error injection test on kernels >= v6.4, the kernel panics
like below. However, this issue couldn't be reproduced on kernels <= v6.3.
mce: [Hardware Error]: CPU 296: Machine Check Exception: f Bank 1: bd80000000100134
mce: [Hardware Error]: RIP 10:<ffffffff821b9776> {__get_user_nocheck_4+0x6/0x20}
mce: [Hardware Error]: TSC 411a93533ed ADDR 346a8730040 MISC 86
mce: [Hardware Error]: PROCESSOR 0:a06d0 TIME 1706000767 SOCKET 1 APIC 211 microcode 80001490
mce: [Hardware Error]: Run the above through 'mcelog --ascii'
mce: [Hardware Error]: Machine check: Data load in unrecoverable area of kernel
Kernel panic - not syncing: Fatal local machine check
The MCA code can recover from an in-kernel #MC if the fixup type is
EX_TYPE_UACCESS, explicitly indicating that the kernel is attempting to
access userspace memory. However, if the fixup type is EX_TYPE_DEFAULT
the only thing that is raised for an in-kernel #MC is a panic.
ex_handler_uaccess() would warn if users gave a non-canonical addresses
(with bit 63 clear) to {get, put}_user(), which was unexpected.
Therefore, commit
b19b74bc99b1 ("x86/mm: Rework address range check in get_user() and put_user()")
replaced _ASM_EXTABLE_UA() with _ASM_EXTABLE() for {get, put}_user()
fixups. However, the new fixup type EX_TYPE_DEFAULT results in a panic.
Commit
6014bc27561f ("x86-64: make access_ok() independent of LAM")
added the check gp_fault_address_ok() right before the WARN_ONCE() in
ex_handler_uaccess() to not warn about non-canonical user addresses due
to LAM.
With that in place, revert back to _ASM_EXTABLE_UA() for {get,put}_user()
exception fixups in order to be able to handle in-kernel MCEs correctly
again.
[ bp: Massage commit message. ] |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nft_ct: sanitize layer 3 and 4 protocol number in custom expectations
- Disallow families other than NFPROTO_{IPV4,IPV6,INET}.
- Disallow layer 4 protocol with no ports, since destination port is a
mandatory attribute for this object. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/msm/dpu: check for valid hw_pp in dpu_encoder_helper_phys_cleanup
The commit 8b45a26f2ba9 ("drm/msm/dpu: reserve cdm blocks for writeback
in case of YUV output") introduced a smatch warning about another
conditional block in dpu_encoder_helper_phys_cleanup() which had assumed
hw_pp will always be valid which may not necessarily be true.
Lets fix the other conditional block by making sure hw_pp is valid
before dereferencing it.
Patchwork: https://patchwork.freedesktop.org/patch/574878/ |
| In the Linux kernel, the following vulnerability has been resolved:
nbd: always initialize struct msghdr completely
syzbot complains that msg->msg_get_inq value can be uninitialized [1]
struct msghdr got many new fields recently, we should always make
sure their values is zero by default.
[1]
BUG: KMSAN: uninit-value in tcp_recvmsg+0x686/0xac0 net/ipv4/tcp.c:2571
tcp_recvmsg+0x686/0xac0 net/ipv4/tcp.c:2571
inet_recvmsg+0x131/0x580 net/ipv4/af_inet.c:879
sock_recvmsg_nosec net/socket.c:1044 [inline]
sock_recvmsg+0x12b/0x1e0 net/socket.c:1066
__sock_xmit+0x236/0x5c0 drivers/block/nbd.c:538
nbd_read_reply drivers/block/nbd.c:732 [inline]
recv_work+0x262/0x3100 drivers/block/nbd.c:863
process_one_work kernel/workqueue.c:2627 [inline]
process_scheduled_works+0x104e/0x1e70 kernel/workqueue.c:2700
worker_thread+0xf45/0x1490 kernel/workqueue.c:2781
kthread+0x3ed/0x540 kernel/kthread.c:388
ret_from_fork+0x66/0x80 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x11/0x20 arch/x86/entry/entry_64.S:242
Local variable msg created at:
__sock_xmit+0x4c/0x5c0 drivers/block/nbd.c:513
nbd_read_reply drivers/block/nbd.c:732 [inline]
recv_work+0x262/0x3100 drivers/block/nbd.c:863
CPU: 1 PID: 7465 Comm: kworker/u5:1 Not tainted 6.7.0-rc7-syzkaller-00041-gf016f7547aee #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 11/17/2023
Workqueue: nbd5-recv recv_work |
