| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| `_nx_icmpv6_validate_options()` scans the option area with `while (length > 2)` (`common/src/nx_icmpv6_validate_options.c:79`). An area whose size leaves a one- or two-byte residue exits the loop with that tail unexamined; the residue is not negative, so the function returns `NX_SUCCESS`. Its zero-length rejection never sees those bytes.
Every consumer then re-walks the same area, reading a two-byte option header at the residue and subtracting `nx_icmpv6_option_length << 3` with no zero check and no remaining-length check. Three outcomes follow, selected by bytes the attacker controls.
**Zero length byte.** The walker subtracts zero and advances zero. All four handlers loop forever — `_nx_icmpv6_process_ra` (`nx_icmpv6_process_ra.c:245, :528`), `_nx_icmpv6_process_ns` (`:251, :329`), `_nx_icmpv6_process_na` (`:147, :156`) and `_nx_icmpv6_process_redirect` (`:247, :350`). The walk runs in the IP thread, which is the highest-priority thread and does not yield inside the loop, so the system stops until a watchdog reset and the frame can be replayed after each one.
**Non-zero length byte on a short residue.** The three unsigned counters underflow — `2 - 8` becomes `0xFFFFFFFA` — and the walk continues past the packet buffer, reading until it faults or meets a zero length byte and freezes. The Router Advertisement counter is signed and exits cleanly in this case.
**One-byte residue.** The walker reads a two-byte option header, over-reading one byte.
During a runaway walk, stray bytes parsing as a link-layer address option are copied into the neighbor cache (`nx_icmpv6_process_ns.c:280, :293`) and subsequently used as the destination MAC for frames to that neighbour, placing off-packet memory on the link. Confirmed by inspection, not reproduced. |
| U-Boot before 2026.10-rc3 contains an out-of-bounds write vulnerability in read_slotted_partition() that fails to validate image size against partition bounds. Attackers with physical access can supply crafted boot media with oversized headers to write past the load buffer into bootloader memory on devices without Android Verified Boot protection. |
| Improper neutralization of input during web page generation ('cross-site scripting') vulnerability in The Wikimedia Foundation Mediawiki - CentralNotice extension allows Stored XSS.
This issue affects Mediawiki - CentralNotice extension: before 1.46.1, 1.45.5, 1.43.10. |
| Improper neutralization of input during web page generation ('cross-site scripting') vulnerability in The Wikimedia Foundation Mediawiki - MassMessage extension allows Stored XSS.
This issue affects Mediawiki - MassMessage extension: before 1.46.1, 1.45.5, 1.43.10. |
| Improper neutralization of input during web page generation ('cross-site scripting') vulnerability in The Wikimedia Foundation Mediawiki - Cargo extension allows Reflected XSS.
This issue affects Mediawiki - Cargo extension: before 1.46.1. |
| URL redirection to untrusted site ('open redirect') vulnerability in The Wikimedia Foundation Mediawiki - Collection extension allows Fake the Source of Data.
This issue affects Mediawiki - Collection extension: before 1.46.1, 1.45.5, 1.43.10. |
| UI misrepresentation in FileSystem in Google Chrome prior to 154.0.8037.57 allowed a remote attacker leveraging social engineering to spoof UI elements via a crafted HTML page. (Chromium security severity: Medium) |
| Incomplete cleanup in Bluetooth in Google Chrome prior to 154.0.8037.57 allowed a remote attacker leveraging social engineering to bypass system access restrictions via a crafted HTML page. (Chromium security severity: Low) |
| UI misrepresentation in Mobile in Google Chrome on on iOS prior to 154.0.8037.57 allowed a remote attacker to spoof UI elements via a crafted HTML page. (Chromium security severity: Low) |
| Russh is a Rust SSH client and server library. Prior to 0.63.1, client_read_authenticated in russh/src/client/encrypted.rs forwards CHANNEL_DATA, CHANNEL_EXTENDED_DATA, CHANNEL_EOF, CHANNEL_CLOSE, CHANNEL_OPEN_FAILURE, CHANNEL_SUCCESS, CHANNEL_FAILURE, and CHANNEL_REQUEST subtypes exit-status, exit-signal, and xon-xoff to public client::Handler callbacks without confirming that the ChannelId belongs to a channel the client opened and established. A malicious SSH server can send lifecycle events for predicted, unopened, unconfirmed, or released channel identifiers, causing application panics or corrupting command completion and exit-code tracking. This issue is fixed in version 0.63.1. |
| Electron is a framework for writing cross-platform desktop applications using JavaScript, HTML and CSS. From 42.3.3 until 42.10.0, 43.5.0, and 44.0.0-beta.6, Electron's sandboxed preload code cache did not verify that a cached entry matched the preload it was served for. A compromised renderer could write attacker-controlled cache data and cause Electron to reuse it for a later load, executing the renderer's code in the more privileged preload context. The issue affects applications that load untrusted content. This issue is fixed in versions 42.10.0, 43.5.0, and 44.0.0-beta.6. |
| An unauthenticated client can drain the RTSP server's packet pool with a couple of dozen requests
that carry a Session header the parser cannot convert.
The Session branch returns the raw NetX error code instead of an RTSP status code:
```c
/* addons/rtsp/nx_rtsp_server.c:2754 */
status = _nx_utility_string_to_uint(field_value_ptr, field_value_length, &session_id);
if (status)
{
return(status); /* NX_INVALID_PARAMETERS / NX_SIZE_ERROR / NX_OVERFLOW */
}
```
Every other branch of the same function maps its failure to an RTSP status first. The CSeq branch
eighteen lines earlier does exactly that (line 2736 returns NX_RTSP_STATUS_CODE_BAD_REQUEST). The
raw code then reaches `_nx_rtsp_server_error_response_send` (nx_rtsp_server.c:1234), which does not
recognise it, takes a path that returns without releasing the response packet it already allocated,
and the block never goes back to the pool.
Six requests with an empty Session header against a 22 packet pool:
```
valid requests: after request 6: pool available = 21, AFTER = 22 / 22
malformed requests: after request 6: pool available = 16, AFTER = 17 / 22
```
One block per request, not returned when the client disconnects. Twenty six requests take the pool
to zero and the server starts failing allocations, after which it serves nobody. If the pool is
shared with the rest of the application, as it is in the shipped sample, the rest of the stack
stops with it.
Convert the `_nx_utility_string_to_uint` failure in the Session branch into
NX_RTSP_STATUS_CODE_BAD_REQUEST the way the CSeq branch does, and release the response packet on
every exit path of `_nx_rtsp_server_error_response_send`. |
| Improper neutralization of input during web page generation ('cross-site scripting') vulnerability in The Wikimedia Foundation Mediawiki - CentralAuth extension allows Stored XSS.
This issue affects Mediawiki - CentralAuth extension: before 1.46.1, 1.45.5, 1.43.10. |
| XML injection (aka blind XPath injection) vulnerability in The Wikimedia Foundation Mediawiki - EasyTimeline extension allows XML Injection.
This issue affects Mediawiki - EasyTimeline extension: before 1.46.1, 1.45.5, 1.43.10. |
| Improper neutralization of input during web page generation ('cross-site scripting') vulnerability in The Wikimedia Foundation Mediawiki - Refreshed skin allows Stored XSS.
This issue affects Mediawiki - Refreshed skin: before 1.46.1, 1.45.5, 1.43.10. |
| anchorme through 3.0.8 contains a regular expression denial of service vulnerability in the IPv6 host extraction regex due to catastrophic backtracking. Attackers can supply specially crafted input strings with repeated patterns to cause exponential regex engine backtracking, blocking the Node.js event loop and denying service to other requests. |
| Issue summary: SM2 signature generation uses non-constant-time arithmetic
on secret values, forming a timing side-channel.
Impact summary: An attacker able to measure SM2 signing times may learn
information about the per-signature secret nonce, which over many signatures
can, via a lattice / Hidden Number Problem attack, lead to recovery of the
private key.
CWE: CWE-208: Observable Timing Discrepancy
Description: SM2 signature generation computes the signature value using
variable-time BIGNUM operations on the secret nonce and the private key, so
the time taken to produce an SM2 signature depends on these secret values,
forming a timing side-channel.
Applications performing SM2 signature generation are affected on all
platforms.
FIPS Impact: no
SM2 is not a FIPS algorithm. |
| Issue summary: The DTLS retransmission logic does not correctly handle
a handshake message write that is suspended part-way through.
The retransmitted message can be read past the message buffer and
the retransmission overwrites the internal state the suspended write
needs to resume correctly.
Impact summary: The retransmitted message can disclose a heap memory
to the peer as plaintext handshake data or cause a crash and a Denial
of Service when the read reaches an unmapped memory region.
CWE: CWE-125: Out-of-bounds Read
Description: DTLS handshake messages can be written out in multiple
fragments, and a write can suspend mid-message (returning WANT_WRITE)
if the underlying transport temporarily cannot accept more data. While
such a write is suspended, the DTLS retransmission timer may
independently fire and ask the retransmission logic to resend an
earlier, already-acknowledged-as-sent message from its retransmit
queue.
The retransmission logic reused the same internal buffer and position
tracking as the message that was still being written, without
resetting the position back to the start of the message being
retransmitted. As a result the retransmission was read starting from
wherever the suspended write had left off, producing a mislabelled
message whose body was leftover bytes from the other, larger message
still in flight - content that was never meant to be sent at that
point, and which could run past the end of the allocated buffer.
Separately, even when the retransmission is positioned correctly,
allowing it to run to completion while another write is suspended
overwrites the same shared bookkeeping that the suspended write
depends on to resume. When the application later resumes the
suspended write (via a subsequent SSL_read(), SSL_write(),
SSL_accept(), or SSL_connect() call), it finds that bookkeeping in a
state inconsistent with the message and aborts the process in
a debugging build.
The fix resets the retransmission's read position to the start of the
message before resending, and skips retransmission entirely whenever a
handshake write is still suspended, deferring to the next call that
resumes it instead.
FIPS impact: no
The affected code is outside the FIPS module boundary. |
| Improper validation of non-secure (NS) pointers in multiple TrustZone-M non-secure callable (NSC) entry functions allows an attacker executing in the non-secure world to supply pointers to secure memory. The secure firmware subsequently dereferences these attacker-controlled pointers without verifying that they reference non-secure memory, resulting in unintended disclosure of secure memory contents. This violates the isolation guarantees provided by Arm TrustZone-M and can be leveraged as a memory disclosure or corruption primitive that may enable recovery of sensitive cryptographic material. |
| Attacker model / Preconditions: a loaded `TXM_MODULE_USER_MODE | TXM_MODULE_MEMORY_PROTECTION` module issuing kernel dispatch calls, on a build with `TX_ENABLE_EVENT_TRACE`.
A user-mode, memory-protected module can register an arbitrary function pointer as the global trace-full callback. The kernel calls it directly — no validation, no trampoline — from privileged kernel code when the trace buffer wraps.
An invalid pointer faults the kernel (DoS). A pointer into the module's own code was observed running with kernel privilege (`CONTROL.nPRIV = 0`), confirmed at runtime with a register capture inside that code. |
