| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
orangefs: skip leading spaces before parsing client debug masks
orangefs_prepare_cdm_array() sizes each client debug keyword buffer
with strcspn(cds_head, " "), but then parses the keyword with %s. The
%s conversion skips leading whitespace, while strcspn() does not.
If a client debug entry starts with a space, the allocation can be sized
for an empty keyword while sscanf() copies the following non-empty token.
This can write past the end of the allocated keyword buffer.
Skip leading spaces before computing the keyword length so the allocation
matches the string parsed by sscanf(). |
| In the Linux kernel, the following vulnerability has been resolved:
ocfs2: bound namelen in dlm_migrate_request_handler
Patch series "ocfs2/dlm: bound peer-controlled lengths in the o2dlm".
The o2dlm receive handlers trust u8 length and count fields from the wire
without bounding them, so a node in a DLM domain can corrupt or panic any
other node with a malformed message. Three defects:
- dlm_migrate_request_handler() passes migrate->namelen unchecked to
dlm_init_mle(), which memcpy()s it into the 32-byte mname[] of an
o2dlm_mle slab object: a heap out-of-bounds write of up to ~215
attacker-controlled bytes.
- dlm_mig_lockres_handler() passes mres->lockname_len unchecked to
dlm_init_lockres(), which memcpy()s it into the 32-byte o2dlm_lockname
slab object: a heap out-of-bounds write of up to ~223 bytes.
- the same handler trusts mres->num_locks without checking that the
message is large enough to hold that many entries, so
dlm_process_recovery_data() walks mres->ml[] past the kmalloc(data_len)
copy and trips a BUG_ON (an out-of-bounds read ending in a panic).
The other o2dlm receive handlers already reject an oversized name; the
migration and recovery handlers have omitted it since the DLM was added
(see the Fixes tags). Patch 1 bounds namelen; patch 2 validates
lockname_len, num_locks, and the payload size. Conforming recovery and
migration traffic is unaffected.
o2net authenticates peers only by the DLM domain key, so any node that has
joined the domain -- including a compromised or malicious member -- can
send these messages. There is no local trigger; the attacker must already
be a member of the cluster.
Each sink was confirmed under KASAN with an out-of-tree module mirroring
it exactly -- a kmem_cache/kmalloc of the real destination size, then the
same unclamped memcpy/loop: slab-out-of-bounds Write for the two writes,
Read for the recovery walk, and a panic. A userspace AddressSanitizer
build faults identically under -m32 and -m64. Scrubbed logs are available
on request.
I reported this privately to security@kernel.org and the ocfs2 maintainers
on 2026-06-20; with no response after the standard embargo period I am
posting the fix publicly. I have no embargo requirement.
This patch (of 2):
A node receiving a DLM_MIGRATE_REQUEST message trusts the peer-supplied
name length (migrate->namelen) without bounding it. dlm_init_mle() then
copies that many bytes into the fixed DLM_LOCKID_NAME_MAX-byte mname[]
array of an o2dlm_mle slab object, so a malformed message from a cluster
peer overflows the slab object by up to ~215 bytes: a heap out-of-bounds
write of attacker-controlled data, reachable by any node in the domain.
Reject an oversized name, the way dlm_master_request_handler() and the
other o2dlm receive handlers already do; the migration handler omits the
check entirely. Conforming messages are unaffected. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: fix BPF_PROG_QUERY OOB write and cgroup backward compat
BPF_PROG_QUERY writes back the 'query.revision' field unconditionally to
userspace. If userspace passes a smaller 'bpf_attr' structure (e.g. 40
bytes, which was the layout before the addition of 'query.revision'),
the kernel performs an out-of-bounds write.
Fix this by propagating the user-provided attribute size 'uattr_size'
down to the cgroup query handlers, and conditionally skipping writing
the revision field to userspace when the provided buffer size is
insufficient.
query.revision in bpf_mprog_query is structurally identical to the
cgroup case: a late tail field, written unconditionally.
But the backward-compat hazard is not the same.
The min-historical-size test is per command, and bpf_mprog_query only
serves attach types that were born with revision in the struct:
- tcx_prog_query -> BPF_TCX_INGRESS/EGRESS
- netkit_prog_query -> BPF_NETKIT_PRIMARY/PEER
tcx, netkit, the revision field, and bpf_mprog_query itself all landed in
the same v6.6 merge window (053c8e1f235d added the mprog query API +
revision; tcx in e420bed02507, netkit in 35dfaad7188c). There has never
been a tcx/netkit BPF_PROG_QUERY userspace that doesn't know about
revision. So for these commands the minimum legitimate struct already
covers offset 56-64 — no old binary can be broken here.
Contrast with cgroup: BPF_PROG_QUERY on cgroup attach types shipped in
2017; revision write-back was bolted on years later (120933984460). That
path has a real population of pre-revision callers. |
| SIPp through 3.7.7 contains a buffer overflow vulnerability in the get_header() function in src/sip_parser.cpp when processing SIP messages with header content exceeding 20,490 bytes. Unauthenticated remote attackers can send crafted SIP messages with oversized headers to overflow the static buffer and crash the process. |
| FFmpeg before 9.0 has an out-of-bounds read because the copied extradata lacked required padding before GetBitContext-based access in libavformat/iamf_writer.c. |
| An issue was discovered in Bosch Sensortec COINES_SDK versions 2.0 through 2.11.
The host streaming API function {{coines_read_stream_sensor_data()}} fails to validate the boundaries of the caller-provided destination buffer.
Internally, the stream processing mechanism in {{comm_intf_process_stream_response()}} discards the requested {{number_of_samples}} argument and copies the entirety of the streaming ring buffer's accumulated data into {{coines_stream_rsp_buf}}.
Subsequently, {{coines_read_stream_sensor_data()}} unconditionally executes a {{memcpy}} of the ring buffer size into the caller-provided buffer without verifying if the destination memory allocation is large enough.
A malicious or compromised hardware board connected via USB or BLE can exploit this by streaming a high volume of sensor samples, causing a heap or stack-based buffer overflow on the host desktop environment.
This can result in a Denial of Service (DoS) or potential arbitrary code execution on the host machine. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: intel-thc-hid: intel-quickspi: validate report size before copy
write_cmd_to_txdma() builds an output report in qsdev->report_buf, a heap
buffer allocated in quickspi_alloc_report_buf() to the device-descriptor
derived max_report_len (a few hundred bytes for a touch controller). It
copies the caller-supplied report into that buffer:
memcpy(write_buf->content, report_buf, report_buf_len);
The HID core caps a report at HID_MAX_BUFFER_SIZE (16384) by default, and
quickspi_hid_ll_driver does not set max_buffer_size, so the length reaches
the driver unbounded. A hidraw SET_REPORT/SET_FEATURE ioctl carrying a
report larger than max_report_len therefore overflows report_buf with
attacker-controlled length and content.
Record the report_buf allocation size and reject reports that do not fit
before copying, matching the equivalent guard in the intel-quicki2c
sibling (quicki2c_init_write_buf()) and the hid-goodix-spi fix.
write_cmd_to_txdma() writes the output report header ahead of the content
in the same buffer, so size the allocation to cover the header as well.
That keeps the added bound from rejecting a maximum-sized report. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: intel-thc-hid: intel-quickspi: bound GET_REPORT response to the caller buffer
quickspi_hid_raw_request() receives the caller's buffer length in len, but
quickspi_get_report() never sees it and copies the whole device-supplied
response into buf regardless:
memcpy(buf, qsdev->report_buf, qsdev->report_len);
qsdev->report_len comes from the input report the touch controller returns,
while buf is sized to whatever the caller asked hidraw for through
HIDIOCGFEATURE or HIDIOCGINPUT. A response larger than that overflows buf
with device-controlled content.
The intel-quicki2c sibling already passes the caller length down to
quicki2c_get_report() and validates the response against it before the
copy. Do the same here. |
| In get_eht_operation_channel_width of ieee802_11_common.c, there is a possible out of bounds read due to an incorrect bounds check. This could lead to remote (proximal/adjacent) information disclosure with no additional execution privileges needed. User interaction is not needed for exploitation. |
| A vulnerability was determined in Tenda HG10 300001138. This issue affects the function formWanRedirect of the file /boaform/formWanRedirect of the component Boa Web Server. Executing a manipulation of the argument if can lead to buffer overflow. The attack may be launched remotely. The exploit has been publicly disclosed and may be utilized. |
| In checkUiccListenConfigNeeded of RoutingManager.cpp, there is a possible out of bounds write due to a missing bounds check. This could lead to remote (proximal/adjacent) code execution with no additional execution privileges needed. User interaction is not needed for exploitation. |
| In openLogicalChannel of multiple files, there is a possible out-of-bounds write due to a missing bounds check. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation. |
| In setTo of ResourceTypes.cpp, there is a possible out-of-bounds heap read due to a missing bounds check. This could lead to local information disclosure with no additional execution privileges needed. User interaction is not needed for exploitation. |
| In stpropnci_process_std of stpropnci_std.cc, there is a possible memory safety issue due to a missing bounds check. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation. |
| In forEachLine of MountRegistry.cpp, there is a possible out of bounds read due to a buffer overflow. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation. |
| A missing bounds check when parsing stored procedure parameter metadata in the MongoDB BI Connector ODBC Driver can result in an out-of-bounds write in the client application process. Triggering this issue requires control over the server the driver connects to, or the ability to respond in its place, in order to return malformed metadata. The resulting memory corruption may cause the client application to terminate abnormally or, under certain conditions, execute unintended code. |
| The nscd service in the GNU C Library 2.3.4 onwards may crash due to a
stack overflow when a malicious DNS server returns too large a response
for a DNS query, resulting in degraded DNS resolution for the system.
Exploitation of this bug needs a system that has nscd enabled and using
an untrusted DNS server for name resolution, with the compromised DNS
server being capable of processing records large enough to result in a
stack overflow in an nscd thread stack. During experimentation, bind 9
was unable to handle large records, but that could change in future or
with a different name server. In typical installations, nscd is
executed in an isolated context as its own user without a shell, due to
which any compromise of that service is isolated.
There is a remote possibility of nscd cache corruption if an attacker
manages to get the stack pointer into a desired point in the heap,
potentially resulting in other caches in nscd being overwritten with
corrupt data through the stack overflow, until the buggy code path
eventually results in a crash.
Finally, a crash in nscd may result in performance degradation when
resolving names, but it does not result in a denial of service. |
| In rw_mfc_handle_read_op of rw_mfc.cc, there is a possible out of bounds write due to an incorrect bounds check. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation. |
| Buffer Overflow vulnerability in GPAC c2dee3aff638cd96f9617ac5b17dc2868cd90ef3 allows an attacker to execute arbitrary code via the j2kdec_process() function. Fixed in 9a253a07fd3f6b48022bba74302bf39388dda859. |
| fs_read_glyphs() in the libXfont2 font-server client (src/fc/fserve.c) copies each glyph's bitmap into a single buffer. Existing checks validates only that the source slice (position, length) lies within the source bitmap buffer. It does not check whether the running destination cursor has exceeded the allocation.
A malicious font server can send overlapping source offsets -- for example 1000 glyphs each referencing {position:0, length:64} with nbytes=64. Each individual source range passes the existing validation, but the cumulative writes total 64000 bytes into a 64-byte destination buffer. This is a heap buffer overflow with attacker-controlled content. |
