| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
rds: filter RDS_INFO_* getsockopt by caller's netns
The RDS_INFO_* family of getsockopt(2) options reads several
file-scope global lists that are not per-netns:
rds_sock_info / rds6_sock_info,
rds_sock_inc_info / rds6_sock_inc_info -> rds_sock_list
rds_tcp_tc_info / rds6_tcp_tc_info -> rds_tcp_tc_list
rds_conn_info / rds6_conn_info,
rds_conn_message_info_cmn (for the *_SEND_MESSAGES and
*_RETRANS_MESSAGES variants),
rds_for_each_conn_info (for RDS_INFO_IB_CONNECTIONS)
-> rds_conn_hash[]
The handlers do not filter by the caller's network namespace.
rds_info_getsockopt() has no netns or capable() check, and
rds_create() has no capable() check, so AF_RDS is reachable from
an unprivileged user namespace. As a result, an unprivileged
caller in a fresh user_ns plus netns can read the bound address
and sock inode of every RDS socket on the host, the peer address
of incoming messages on every RDS socket on the host, the peer
address and TCP sequence numbers of every rds-tcp connection on
the host, and the peer address and RDS sequence numbers of every
RDS connection on the host.
The rds-tcp transport is reachable from a non-initial netns (see
rds_set_transport()), so a one-shot init_net gate at
rds_info_getsockopt() would deny legitimate per-netns visibility
to rds-tcp callers. Instead, filter at each handler by comparing
the netns of the caller's socket to the netns of the list entry,
or to rds_conn_net(conn) for connection paths. Only copy entries
whose netns matches the caller. Counters (RDS_INFO_COUNTERS) are
aggregate statistics and remain global.
Reproducer (KASAN VM, rds and rds_tcp loaded): an AF_RDS socket
binds 127.0.0.1:4242 in init_net as root. A child process enters
a fresh user_ns plus netns and opens AF_RDS there, then calls
getsockopt(SOL_RDS, RDS_INFO_SOCKETS). Before this change, the
child sees the init_net socket. After this change, the child
sees zero entries.
Drop the rds_sock_count, rds_tcp_tc_count, and rds6_tcp_tc_count
globals. v2 used them for the size precheck and lens->nr; v3
replaced the precheck with a per-ns count from a first pass over
the list, so the globals have no remaining readers. The matching
increments and decrements in rds_create()/rds_destroy_sock() and
rds_tcp_set_callbacks()/rds_tcp_restore_callbacks() go away with
them. Reported by the kernel test robot under clang W=1. |
| In the Linux kernel, the following vulnerability has been resolved:
driver core: Avoid warning when removing a device while its supplier is unbinding
During driver removal, the following warning can appear:
WARNING: CPU: 1 PID: 139 at drivers/base/core.c:1497 __device_links_no_driver+0xcc/0xfc
...
Call trace:
__device_links_no_driver+0xcc/0xfc (P)
device_links_driver_cleanup+0xa8/0xf0
device_release_driver_internal+0x208/0x23c
device_links_unbind_consumers+0xe0/0x108
device_release_driver_internal+0xec/0x23c
device_links_unbind_consumers+0xe0/0x108
device_release_driver_internal+0xec/0x23c
device_links_unbind_consumers+0xe0/0x108
device_release_driver_internal+0xec/0x23c
driver_detach+0xa0/0x12c
bus_remove_driver+0x6c/0xbc
driver_unregister+0x30/0x60
pci_unregister_driver+0x20/0x9c
lan966x_pci_driver_exit+0x18/0xa90 [lan966x_pci]
This warning is triggered when a consumer is removed because the links
status of its supplier is not DL_DEV_DRIVER_BOUND and the link flag
DL_FLAG_SYNC_STATE_ONLY is not set.
The topology in terms of consumers/suppliers used was the following
(consumer ---> supplier):
i2c -----------> OIC ----> PCI device
| ^
| |
+---> pinctrl ---+
When the PCI device is removed, the OIC (interrupt controller) has to be
removed. In order to remove the OIC, pinctrl and i2c need to be removed
and to remove pinctrl, i2c need to be removed. The removal order is:
1) i2c
2) pinctrl
3) OIC
4) PCI device
In details, the removal sequence is the following (with 0000:01:00.0 the
PCI device):
driver_detach: call device_release_driver_internal(0000:01:00.0)...
device_links_busy(0000:01:00.0):
links->status = DL_DEV_UNBINDING
device_links_unbind_consumers(0000:01:00.0):
0000:01:00.0--oic link->status = DL_STATE_SUPPLIER_UNBIND
call device_release_driver_internal(oic)...
device_links_busy(oic):
links->status = DL_DEV_UNBINDING
device_links_unbind_consumers(oic):
oic--pinctrl link->status = DL_STATE_SUPPLIER_UNBIND
call device_release_driver_internal(pinctrl)...
device_links_busy(pinctrl):
links->status = DL_DEV_UNBINDING
device_links_unbind_consumers(pinctrl):
pinctrl--i2c link->status = DL_STATE_SUPPLIER_UNBIND
call device_release_driver_internal(i2c)...
device_links_busy(i2c): links->status = DL_DEV_UNBINDING
__device_links_no_driver(i2c)...
pinctrl--i2c link->status is DL_STATE_SUPPLIER_UNBIND
oic--i2c link->status is DL_STATE_ACTIVE
oic--i2c link->supplier->links.status is DL_DEV_UNBINDING
The warning is triggered by the i2c removal because the OIC (supplier)
links status is not DL_DEV_DRIVER_BOUND. Its links status is indeed set
to DL_DEV_UNBINDING.
It is perfectly legit to have the links status set to DL_DEV_UNBINDING
in that case. Indeed we had started to unbind the OIC which triggered
the consumer unbinding and didn't finish yet when the i2c is unbound.
Avoid the warning when the supplier links status is set to
DL_DEV_UNBINDING and thus support this removal sequence without any
warnings. |
| In the Linux kernel, the following vulnerability has been resolved:
tty: serial: 8250: protect against NULL uart->port.dev in register
serial8250_register_8250_port() conditionally copies uart->port.dev
from up->port.dev only when up->port.dev is non-NULL:
if (up->port.dev) {
uart->port.dev = up->port.dev;
...
}
So if both the existing uart slot and up have a NULL ->dev,
uart->port.dev remains NULL. The very next ACPI companion check
then dereferences it unconditionally:
if (!has_acpi_companion(uart->port.dev)) {
has_acpi_companion() reads dev->fwnode without a NULL guard
(include/linux/acpi.h), so this NULL-derefs the kernel for the
remaining no-dev case rather than just skipping the
mctrl_gpio_init() initialisation as intended.
smatch flags the inconsistency:
drivers/tty/serial/8250/8250_core.c:767
serial8250_register_8250_port() error: 'uart->port.dev' could be
null (see line 719)
Guard the call with a NULL check so register continues to work
for callers that legitimately have no parent device (legacy
non-OF/non-ACPI registrations).
No functional change for callers that pass a non-NULL ->dev. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: core: hcd: fix possible deadlock in rh control transfers
>From within the SCSI error handler memory allocations must not
trigger IO. Handling errors in UAS and the storage driver may
involve resetting a device. The thread doing the reset itself
relies on VM magic. However, that is insufficient, as resetting
a device involves resuming it. Resumption as well as resetting
involves conrol transfers to the parent of the device to be reset.
That may be a root hub. Hence usbcore must heed the flags passed
to usb_submit_urb() processing control transfers to root hubs.
The problem exist since the storage driver has been merged. |
| nDPI 5.1.0 contains a memory access issue in the DNS dissector and serializer deserialization code. Specially crafted network input can cause byte-buffer addresses at odd offsets to be cast to uint16_t or wider integer pointers and directly dereferenced without alignment checks. This results in undefined behavior and can cause process termination in UBSan-instrumented builds or on strict-alignment architectures, leading to denial of service. |
| In the Linux kernel, the following vulnerability has been resolved:
qnx4: handle set_blocksize failures
qnx4 uses buffer_heads, which don't handle block size > PAGE_SIZE well.
Without this, mounting will hit the
BUG_ON(offset >= folio_size(folio));
in folio_set_bh on the first __bread_gfp call. |
| In the Linux kernel, the following vulnerability has been resolved:
pinctrl: mediatek: paris: bypass pinctrl GPIO layer in set GPIO direction
pinctrl_gpio_direction_input() / pinctrl_gpio_direction_output() take
the pinctrl mutex. This causes a gpiochip operations to need to sleep.
Worse yet, the .can_sleep field in the gpiochip is not set. This causes
the shared GPIO proxy to trip over, as it uses gpiod_cansleep() to check
whether it can use a spinlock or needs a mutex. In this case, it ends
up taking a spinlock, then calls pinctrl_gpio_direction_output(), which
takes a mutex. This causes a huge warning.
While this class of Mediatek hardware does not have separate clear/set
registers, the pinctrl context has a spinlock that is taken whenever
a register read-modify-write is done. Also, once the GPIO function is
selected / muxed in, further GPIO operations do not involve pinctrl
operations or state. The GPIO direction and level values do not require
toggling the pinmux or any other pin config options.
Switch to directly calling mtk_pinmux_gpio_set_direction() in the GPIO
set direction callbacks to avoid taking the pinctrl mutex. Drop the
.gpio_set_direction field in mtk_pmxops to signal we are no longer using
the pinctrl GPIO layer for setting the direction. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: avoid out-of-bounds access in monitor
In NAN, we don't know on what band the frame will be sent. Therefore we
set info->band to NUM_NL80211_BANDS. However, this leads to out-of-bound
access in ieee80211_add_tx_radiotap_header when we try to access the
sbands array.
Fix it by not accessing the array if the band is NUM_NL80211_BANDS.
This means that we will not report rate info for legacy rate in NAN.
But nobody really cares about it. |
| Untrusted pointer dereference vulnerability in Altera Trusted Firmware on HPS allows Exploitation of Improperly Configured or Implemented Memory Protections.
This issue affects Trusted Firmware: through socfpga_v2.14.0. |
| phpMyFAQ is an open source FAQ web application. Versions 3.2.0 through 4.1.5 contain an authentication bypass in its public two-factor authentication verification flow: an unauthenticated attacker can submit an account’s numeric user ID and a valid or brute-forced six-digit TOTP code without first authenticating with the account password, allowing takeover of any 2FA-enabled account, including administrator accounts. Version 4.1.6 is patched by binding TOTP verification to a session established after successful password authentication and limiting failed TOTP attempts. No official workaround is documented; affected installations should upgrade to 4.1.6 or later. |
| A Pre-authentication SSRF vulnerability exists in the SMA1000 Appliance Work Place interface due to an unintended alternate access path. A remote unauthenticated attacker could potentially exploit this vulnerability to gain unauthorized access to sensitive functionality and perform unauthorized operations. |
| Incorrect Access Control in the HTTP API module in ZLMediaKit commit 9fd5152 allows remote attackers to achieve Remote Code Execution (RCE) via unauthenticated access to the setServerConfig API endpoint, which permits overwriting the ffmpeg.snap configuration parameter with arbitrary shell commands. These commands are subsequently executed through the getSnap API endpoint with the privileges of the ZLMediaKit process. |
| Velociraptor's prefetch library contains an out of bound vulnerability which may cause a crash when parsing certain malformed prefetch files. |
| phpMyFAQ is an open source FAQ web application. A stored cross-site scripting (XSS) vulnerability in versions prior to 4.2.0-alpha allows any unauthenticated user (or low-privileged registered user) to inject arbitrary JavaScript that executes in an administrator's browser when they review or edit a user-submitted FAQ entry. This leads to admin account takeover via session theft. The vulnerability exists because `html_entity_decode()` converts HTML entities into executable HTML after `strip_tags()` has already passed them through, and the admin template renders the content with Twig's `|raw` filter without any output sanitization. Version 4.2.0-alpha fixes the issue. |
| A stack-based buffer overflow vulnerability in the CGI program of Zyxel GS1900-48HPv2 firmware versions through 2.90(ABTQ.1)C0 could allow a LAN-based, unauthenticated attacker to exploit the flaw and potentially execute OS commands via a crafted HTTP request. |
| Type confusion in V8 in Google Chrome prior to 152.0.7977.82 allowed a remote attacker to execute arbitrary code inside the sandbox via a crafted HTML page. (Chromium security severity: High) |
| Out of bounds write in V8 in Google Chrome prior to 153.0.8010.36 allowed a remote attacker to execute arbitrary code inside the sandbox via a crafted HTML page. (Chromium security severity: Medium) |
| Dell SCG 5.0 Appliance versions prior to 5.36.00.16 and Dell SCG 5.0 Application versions prior to 5.36.00.00, contains an Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') vulnerability. An unauthenticated attacker with remote access could potentially exploit this vulnerability, leading to script injection. |
| Out-of-bounds write vulnerability in Altera Trusted Firmware on HPS allows Exploitation of Improperly Configured or Implemented Memory Protections.
This issue affects Trusted Firmware: through socfpga_v2.14.0. |
| Logto is the modern, open-source auth infrastructure for SaaS and AI apps. From 1.31.0 until 1.42.0, the Account API handlers in packages/core/src/routes/account/third-party-tokens.ts allow a caller holding a same-user access token with only the openid scope to retrieve stored social or enterprise SSO provider access tokens through GET /api/my-account/identities/{target}/access-token or GET /api/my-account/sso-identities/{connectorId}/access-token. The handlers authenticate the user but do not require the identities scope that protects neighboring identity-detail operations, bypassing the intended Account API consent boundary. Exploitation requires federated token-set storage to be enabled and the affected user to have authenticated through a supported connector. A low-trust application can use the disclosed provider token against upstream APIs within that token's granted scopes. This issue is fixed in version 1.42.0. |
