| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ocfs2: validate inline data i_size during inode read
When reading an inode from disk, ocfs2_validate_inode_block() performs
various sanity checks but does not validate the size of inline data. If
the filesystem is corrupted, an inode's i_size can exceed the actual
inline data capacity (id_count).
This causes ocfs2_dir_foreach_blk_id() to iterate beyond the inline data
buffer, triggering a use-after-free when accessing directory entries from
freed memory.
In the syzbot report:
- i_size was 1099511627576 bytes (~1TB)
- Actual inline data capacity (id_count) is typically <256 bytes
- A garbage rec_len (54648) caused ctx->pos to jump out of bounds
- This triggered a UAF in ocfs2_check_dir_entry()
Fix by adding a validation check in ocfs2_validate_inode_block() to ensure
inodes with inline data have i_size <= id_count. This catches the
corruption early during inode read and prevents all downstream code from
operating on invalid data. |
| In the Linux kernel, the following vulnerability has been resolved:
ocfs2: fix out-of-bounds write in ocfs2_write_end_inline
KASAN reports a use-after-free write of 4086 bytes in
ocfs2_write_end_inline, called from ocfs2_write_end_nolock during a
copy_file_range splice fallback on a corrupted ocfs2 filesystem mounted on
a loop device. The actual bug is an out-of-bounds write past the inode
block buffer, not a true use-after-free. The write overflows into an
adjacent freed page, which KASAN reports as UAF.
The root cause is that ocfs2_try_to_write_inline_data trusts the on-disk
id_count field to determine whether a write fits in inline data. On a
corrupted filesystem, id_count can exceed the physical maximum inline data
capacity, causing writes to overflow the inode block buffer.
Call trace (crash path):
vfs_copy_file_range (fs/read_write.c:1634)
do_splice_direct
splice_direct_to_actor
iter_file_splice_write
ocfs2_file_write_iter
generic_perform_write
ocfs2_write_end
ocfs2_write_end_nolock (fs/ocfs2/aops.c:1949)
ocfs2_write_end_inline (fs/ocfs2/aops.c:1915)
memcpy_from_folio <-- KASAN: write OOB
So add id_count upper bound check in ocfs2_validate_inode_block() to
alongside the existing i_size check to fix it. |
| In the Linux kernel, the following vulnerability has been resolved:
net: sched: act_csum: validate nested VLAN headers
tcf_csum_act() walks nested VLAN headers directly from skb->data when an
skb still carries in-payload VLAN tags. The current code reads
vlan->h_vlan_encapsulated_proto and then pulls VLAN_HLEN bytes without
first ensuring that the full VLAN header is present in the linear area.
If only part of an inner VLAN header is linearized, accessing
h_vlan_encapsulated_proto reads past the linear area, and the following
skb_pull(VLAN_HLEN) may violate skb invariants.
Fix this by requiring pskb_may_pull(skb, VLAN_HLEN) before accessing and
pulling each nested VLAN header. If the header still is not fully
available, drop the packet through the existing error path. |
| In the Linux kernel, the following vulnerability has been resolved:
i2c: s3c24xx: check the size of the SMBUS message before using it
The first byte of an i2c SMBUS message is the size, and it should be
verified to ensure that it is in the range of 0..I2C_SMBUS_BLOCK_MAX
before processing it.
This is the same logic that was added in commit a6e04f05ce0b ("i2c:
tegra: check msg length in SMBUS block read") to the i2c tegra driver. |
| In the Linux kernel, the following vulnerability has been resolved:
net: usb: cdc-phonet: fix skb frags[] overflow in rx_complete()
A malicious USB device claiming to be a CDC Phonet modem can overflow
the skb_shared_info->frags[] array by sending an unbounded sequence of
full-page bulk transfers.
Drop the skb and increment the length error when the frag limit is
reached. This matches the same fix that commit f0813bcd2d9d ("net:
wwan: t7xx: fix potential skb->frags overflow in RX path") did for the
t7xx driver. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: fireworks: bound device-supplied status before string array lookup
The status field in an EFW response is a 32-bit value supplied by the
firewire device. efr_status_names[] has 17 entries so a status value
outside that range goes off into the weeds when looking at the %s value.
Even worse, the status could return EFR_STATUS_INCOMPLETE which is
0x80000000, and is obviously not in that array of potential strings.
Fix this up by properly bounding the index against the array size and
printing "unknown" if it's not recognized. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: renesas_usb3: validate endpoint index in standard request handlers
The GET_STATUS and SET/CLEAR_FEATURE handlers extract the endpoint
number from the host-supplied wIndex without any sort of validation.
Fix this up by validating the number of endpoints actually match up with
the number the device has before attempting to dereference a pointer
based on this math.
This is just like what was done in commit ee0d382feb44 ("usb: gadget:
aspeed_udc: validate endpoint index for ast udc") for the aspeed driver. |
| In the Linux kernel, the following vulnerability has been resolved:
ocfs2: handle invalid dinode in ocfs2_group_extend
[BUG]
kernel BUG at fs/ocfs2/resize.c:308!
Oops: invalid opcode: 0000 [#1] SMP KASAN NOPTI
RIP: 0010:ocfs2_group_extend+0x10aa/0x1ae0 fs/ocfs2/resize.c:308
Code: 8b8520ff ffff83f8 860f8580 030000e8 5cc3c1fe
Call Trace:
...
ocfs2_ioctl+0x175/0x6e0 fs/ocfs2/ioctl.c:869
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:597 [inline]
__se_sys_ioctl fs/ioctl.c:583 [inline]
__x64_sys_ioctl+0x197/0x1e0 fs/ioctl.c:583
x64_sys_call+0x1144/0x26a0 arch/x86/include/generated/asm/syscalls_64.h:17
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0x93/0xf80 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x76/0x7e
...
[CAUSE]
ocfs2_group_extend() assumes that the global bitmap inode block
returned from ocfs2_inode_lock() has already been validated and
BUG_ONs when the signature is not a dinode. That assumption is too
strong for crafted filesystems because the JBD2-managed buffer path
can bypass structural validation and return an invalid dinode to the
resize ioctl.
[FIX]
Validate the dinode explicitly in ocfs2_group_extend(). If the global
bitmap buffer does not contain a valid dinode, report filesystem
corruption with ocfs2_error() and fail the resize operation instead of
crashing the kernel. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: SEV: Drop WARN on large size for KVM_MEMORY_ENCRYPT_REG_REGION
Drop the WARN in sev_pin_memory() on npages overflowing an int, as the
WARN is comically trivially to trigger from userspace, e.g. by doing:
struct kvm_enc_region range = {
.addr = 0,
.size = -1ul,
};
__vm_ioctl(vm, KVM_MEMORY_ENCRYPT_REG_REGION, &range);
Note, the checks in sev_mem_enc_register_region() that presumably exist to
verify the incoming address+size are completely worthless, as both "addr"
and "size" are u64s and SEV is 64-bit only, i.e. they _can't_ be greater
than ULONG_MAX. That wart will be cleaned up in the near future.
if (range->addr > ULONG_MAX || range->size > ULONG_MAX)
return -EINVAL;
Opportunistically add a comment to explain why the code calculates the
number of pages the "hard" way, e.g. instead of just shifting @ulen. |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: fix to wait on block writeback for post_read case
If inode is compressed, but not encrypted, it missed to call
f2fs_wait_on_block_writeback() to wait for GCed page writeback
in IPU write path.
Thread A GC-Thread
- f2fs_gc
- do_garbage_collect
- gc_data_segment
- move_data_block
- f2fs_submit_page_write
migrate normal cluster's block via
meta_inode's page cache
- f2fs_write_single_data_page
- f2fs_do_write_data_page
- f2fs_inplace_write_data
- f2fs_submit_page_bio
IRQ
- f2fs_read_end_io
IRQ
old data overrides new data due to
out-of-order GC and common IO.
- f2fs_read_end_io |
| A vulnerability was detected in TRENDnet TEW-432BRP 3.10B20. The affected element is the function formSetFirewallRule of the file /goform/formSetFirewallRule. The manipulation of the argument firewall_name results in stack-based buffer overflow. The attack can be executed remotely. The exploit is now public and may be used. The vendor explains: "This product has been EOL for 15 years (since 2009). As the item has been EOL for such a long time, we are not able to replicate or fix any vulnerabilities." This vulnerability only affects products that are no longer supported by the maintainer. |
| Integer overflow in WTF in Google Chrome prior to 148.0.7778.216 allowed a remote attacker to execute arbitrary code inside a sandbox via a crafted HTML page. (Chromium security severity: High) |
| A vulnerability was detected in TRENDnet TEW-432BRP 3.10B20. This affects the function formResetStatistic of the file /goform/formResetStatistic. Performing a manipulation of the argument status_statistic results in stack-based buffer overflow. The attack may be initiated remotely. The exploit is now public and may be used. The vendor explains: "This product has been EOL for 15 years (since 2009). As the item has been EOL for such a long time, we are not able to replicate or fix any vulnerabilities." This vulnerability only affects products that are no longer supported by the maintainer. |
| XX-Net V5.16.6 contains a WebSocket frame parsing vulnerability in the WebSocket_receive_worker routine of simple_http_server.py that allows attackers to cause corrupted application data by sending unmasked WebSocket frames. The server unconditionally reads 4 bytes as a masking key regardless of whether the MASK bit is set in the frame header, causing the first 4 bytes of payload to be consumed as a mask key and the remaining payload to be incorrectly XOR-decoded, resulting in data corruption alongside missing RSV bit, opcode, and FIN fragmentation validations. |
| A vulnerability was determined in Tenda W12 3.0.0.7(4763). Impacted is the function cgiWifiMacFilterSet of the file /bin/httpd. This manipulation of the argument wifiMacFilterSet.macList.mac causes stack-based buffer overflow. The attack can be initiated remotely. The exploit has been publicly disclosed and may be utilized. |
| A vulnerability was identified in Assimp up to 6.0.4. This impacts the function Assimp::MDL::HalfLife::HL1MDLLoader::read_animations of the file HL1MDLLoader.cpp of the component Half-Life 1 MDL Loader. Such manipulation leads to heap-based buffer overflow. The attack must be carried out locally. The exploit is publicly available and might be used. The project tagged the reported issue as bug. |
| A security vulnerability has been detected in TRENDnet TEW-432BRP 3.10B20. Impacted is the function formSetMACFilter of the file /goform/formSetMACFilter. The manipulation of the argument filter_name leads to stack-based buffer overflow. Remote exploitation of the attack is possible. The exploit has been disclosed publicly and may be used. The vendor explains: "This product has been EOL for 15 years (since 2009). As the item has been EOL for such a long time, we are not able to replicate or fix any vulnerabilities." This vulnerability only affects products that are no longer supported by the maintainer. |
| A vulnerability was identified in Edimax BR-6478AC 1.23. Affected by this vulnerability is the function formPPPoESetup of the file /goform/formPPPoESetup of the component POST Request Handler. The manipulation of the argument pppUserName leads to stack-based buffer overflow. The attack can be initiated remotely. The exploit is publicly available and might be used. |
| A security flaw has been discovered in Edimax BR-6478AC 1.23. Affected by this issue is the function formQoS of the file /goform/formQoS of the component POST Request Handler. The manipulation of the argument selSSID results in buffer overflow. The attack can be launched remotely. The exploit has been released to the public and may be used for attacks. |
| A security vulnerability has been detected in TRENDnet TEW-432BRP 3.10B20. Affected by this issue is the function formSetEnableWizard of the file /goform/formSetEnableWizard. Such manipulation of the argument start_wizard leads to stack-based buffer overflow. The attack can be launched remotely. The exploit has been disclosed publicly and may be used. The vendor explains: "This product has been EOL for 15 years (since 2009). As the item has been EOL for such a long time, we are not able to replicate or fix any vulnerabilities." This vulnerability only affects products that are no longer supported by the maintainer. |
