| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
fs/fcntl: fix SOFTIRQ-unsafe lock order in fasync signaling
A SOFTIRQ-safe to SOFTIRQ-unsafe lock order deadlock can occur in
send_sigio() and send_sigurg() when a process group receives a signal.
When FASYNC is configured for a process group (PIDTYPE_PGID), both
functions use read_lock(&tasklist_lock) to traverse the task list.
However, they are frequently called from softirq context:
- send_sigio() via input_inject_event -> kill_fasync
- send_sigurg() via tcp_check_urg -> sk_send_sigurg (NET_RX_SOFTIRQ)
The deadlock is caused by the rwlock writer fairness mechanism:
1. CPU 0 (process context) holds read_lock(&tasklist_lock) in do_wait().
2. CPU 1 (process context) attempts write_lock(&tasklist_lock) in
fork() or exit() and spins, which blocks all new readers.
3. CPU 0 is interrupted by a softirq (e.g., TCP URG packet reception).
4. The softirq calls send_sigurg() and attempts to acquire
read_lock(&tasklist_lock), deadlocking because CPU 1 is waiting.
Since PID hashing and do_each_pid_task() traversals are already
RCU-protected, the read_lock on tasklist_lock is no longer strictly
required for safe traversal. Fix this by replacing tasklist_lock with
rcu_read_lock(), aligning the process group signaling path with the
single-PID path. This also mitigates a potential remote denial of
service vector via TCP URG packets.
Lockdep splat:
=====================================================
WARNING: SOFTIRQ-safe -> SOFTIRQ-unsafe lock order detected
[...]
Chain exists of:
&dev->event_lock --> &f_owner->lock --> tasklist_lock
Possible interrupt unsafe locking scenario:
CPU0 CPU1
---- ----
lock(tasklist_lock);
local_irq_disable();
lock(&dev->event_lock);
lock(&f_owner->lock);
<Interrupt>
lock(&dev->event_lock);
*** DEADLOCK *** |
| A flaw was found in the reset-credentials flow of the keycloak-services component, which is the core engine for identity and access management in Red Hat Build of Keycloak. The issue allows an unauthenticated attacker to force the password reset process for any user without needing to click the required email verification link. This can result in the attacker gaining full control over target user accounts by directly setting new credentials. |
| A vulnerability has been identified in SIMATIC Field PG M5 (All versions), SIMATIC Field PG M6 (All versions < V26.01.12), SIMATIC IPC BX-21A (All versions < V31.01.07), SIMATIC IPC BX-32A (All versions < V29.01.07), SIMATIC IPC BX-39A (All versions < V29.01.07), SIMATIC IPC BX-59A (All versions < V32.01.04), SIMATIC IPC PX-32A (All versions < V29.01.07), SIMATIC IPC PX-39A (All versions < V29.01.07), SIMATIC IPC PX-39A PRO (All versions < V29.01.07), SIMATIC IPC RC-543A (All versions < V36.01.03), SIMATIC IPC RC-543B (All versions < V35.01.12), SIMATIC IPC RW-543A (All versions < V1.1.4), SIMATIC IPC RW-543B (All versions < V35.02.10), SIMATIC IPC127E (All versions < V27.01.11), SIMATIC IPC227E (All versions), SIMATIC IPC227G (All versions < V28.01.14), SIMATIC IPC277E (All versions), SIMATIC IPC277G (All versions < V28.01.14), SIMATIC IPC277G PRO (All versions < V28.01.14), SIMATIC IPC3000 SMART V3 (All versions), SIMATIC IPC327G (All versions < V28.01.14), SIMATIC IPC347G (All versions), SIMATIC IPC377G (All versions < V28.01.14), SIMATIC IPC427E (All versions < V21.01.21), SIMATIC IPC477E (All versions < V21.01.21), SIMATIC IPC477E PRO (All versions < V21.01.21), SIMATIC IPC527G (All versions), SIMATIC IPC627E (All versions < V25.02.15), SIMATIC IPC647E (All versions < V25.02.15), SIMATIC IPC677E (All versions < V25.02.15), SIMATIC IPC847E (All versions < V25.02.15), SIMATIC ITP1000 (All versions). The affected devices have insufficient protection mechanism for the EFI(Extensible Firmware Interface) variables stored on the device. This could allow an authenticated attacker to disable the BIOS password without proper authorization by directly communicate with the flash controller. |
| A vulnerability has been identified in SIMATIC Field PG M5 (All versions), SIMATIC IPC BX-21A (All versions < V31.01.07), SIMATIC IPC BX-32A (All versions < V29.01.07), SIMATIC IPC BX-39A (All versions < V29.01.07), SIMATIC IPC BX-59A (All versions < V32.01.04), SIMATIC IPC PX-32A (All versions < V29.01.07), SIMATIC IPC PX-39A (All versions < V29.01.07), SIMATIC IPC PX-39A PRO (All versions < V29.01.07), SIMATIC IPC RC-543A (All versions < V36.01.03), SIMATIC IPC RC-543B (All versions < V35.01.12), SIMATIC IPC RW-543A (All versions < V1.1.4), SIMATIC IPC RW-543B (All versions < V35.02.10), SIMATIC IPC127E (All versions < V27.01.11), SIMATIC IPC227E (All versions), SIMATIC IPC227G (All versions < V28.01.14), SIMATIC IPC277E (All versions), SIMATIC IPC277G (All versions < V28.01.14), SIMATIC IPC277G PRO (All versions < V28.01.14), SIMATIC IPC3000 SMART V3 (All versions), SIMATIC IPC327G (All versions < V28.01.14), SIMATIC IPC347G (All versions), SIMATIC IPC377G (All versions < V28.01.14), SIMATIC IPC427E (All versions < V21.01.21), SIMATIC IPC477E (All versions < V21.01.21), SIMATIC IPC477E PRO (All versions < V21.01.21), SIMATIC IPC527G (All versions), SIMATIC IPC627E (All versions < V25.02.15), SIMATIC IPC647E (All versions < V25.02.15), SIMATIC IPC677E (All versions < V25.02.15), SIMATIC IPC847E (All versions < V25.02.15), SIMATIC ITP1000 (All versions). The affected devices have insufficient protection mechanism for the EFI(Extensible Firmware Interface) variables stored on the device. This could allow an authenticated attacker to alter the secure boot configuration without proper authorization by directly communicate with the flash controller. |
| In the Linux kernel, the following vulnerability has been resolved:
netfs: Fix missing locking around retry adding new subreqs
Fix netfs_retry_read_subrequests() and netfs_retry_write_stream() to take
the appropriate lock when adding extra subrequests into
stream->subrequests. |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: fix potential deadloop in prepare_compress_overwrite()
Jan Prusakowski reported a kernel hang issue as below:
When running xfstests on linux-next kernel (6.14.0-rc3, 6.12) I
encountered a problem in generic/475 test where fsstress process
gets blocked in __f2fs_write_data_pages() and the test hangs.
The options I used are:
MKFS_OPTIONS -- -O compression -O extra_attr -O project_quota -O quota /dev/vdc
MOUNT_OPTIONS -- -o acl,user_xattr -o discard,compress_extension=* /dev/vdc /vdc
INFO: task kworker/u8:0:11 blocked for more than 122 seconds.
Not tainted 6.14.0-rc3-xfstests-lockdep #1
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:kworker/u8:0 state:D stack:0 pid:11 tgid:11 ppid:2 task_flags:0x4208160 flags:0x00004000
Workqueue: writeback wb_workfn (flush-253:0)
Call Trace:
<TASK>
__schedule+0x309/0x8e0
schedule+0x3a/0x100
schedule_preempt_disabled+0x15/0x30
__mutex_lock+0x59a/0xdb0
__f2fs_write_data_pages+0x3ac/0x400
do_writepages+0xe8/0x290
__writeback_single_inode+0x5c/0x360
writeback_sb_inodes+0x22f/0x570
wb_writeback+0xb0/0x410
wb_do_writeback+0x47/0x2f0
wb_workfn+0x5a/0x1c0
process_one_work+0x223/0x5b0
worker_thread+0x1d5/0x3c0
kthread+0xfd/0x230
ret_from_fork+0x31/0x50
ret_from_fork_asm+0x1a/0x30
</TASK>
The root cause is: once generic/475 starts toload error table to dm
device, f2fs_prepare_compress_overwrite() will loop reading compressed
cluster pages due to IO error, meanwhile it has held .writepages lock,
it can block all other writeback tasks.
Let's fix this issue w/ below changes:
- add f2fs_handle_page_eio() in prepare_compress_overwrite() to
detect IO error.
- detect cp_error earler in f2fs_read_multi_pages(). |
| In the Linux kernel, the following vulnerability has been resolved:
block: mark GFP_NOIO around sysfs ->store()
sysfs ->store is called with queue freezed, meantime we have several
->store() callbacks(update_nr_requests, wbt, scheduler) to allocate
memory with GFP_KERNEL which may run into direct reclaim code path,
then potential deadlock can be caused.
Fix the issue by marking NOIO around sysfs ->store() |
| Tobit Laboratories AG TeamDavid's Webbox contains an open redirect vulnerability via the
“replyUrl” parameter. An attacker can exploit this vulnerability to
craft a URL within the application that, when visited, redirects the
user’s browser to an arbitrary third-party site. This can be abused for
phishing attacks, where users receive a trusted domain link but are
redirected to a phishing website. This issue affects TeamDavid before Rollout 528.
Starting with Rollout 528 (June 30, 2026), the affected functionality is disabled by default and the vulnerabilities are therefore no longer exposed through this functionality. |
| Tobit Laboratories AG TeamDavid's Webbox application is vulnerable to HTTP header injection through the
“cType” URL parameter, which allows arbitrary modification of the
Content-Type header in HTTP responses. Because the parameter does not
properly restrict control characters such as URL-encoded newlines
(“%0a”) or colons, attackers can inject additional headers including
extra Location headers into the server’s response. This results e.g. in
an open redirect vulnerability. This issue affects TeamDavid before Rollout 528.
Starting with Rollout 528 (June 30, 2026), the affected functionality is disabled by default and the vulnerabilities are therefore no longer exposed through this functionality. |
| The Webbox of TeamDavid by Tobit Laboratories AG constructs redirect URLs using user-supplied input,
which is appended to the redirect target in a 302 HTTP response. By
using URL-encoded characters such as “%2e” (representing a dot), an
attacker can manipulate the portion of the URL following the top-level
domain (TLD). If a similar, registerable TLD exists (for example, if
“.com” is the application’s domain, and “.company” is available for
registration), an attacker can craft a URL to redirect users to a
malicious “.company” domain. By using URL-encoded line feeds, it becomes
possible to insert arbitrary response headers in the server's HTTP
response.
This issue affects TeamDavid before Rollout 528.
Starting with Rollout 528 (June 30, 2026), the affected functionality is disabled by default and the vulnerabilities are therefore no longer exposed through this functionality. |
| Authorization Bypass Through User-Controlled Key vulnerability in Brainstorm Force SureForms allows Exploiting Incorrectly Configured Access Control Security Levels.
This issue affects SureForms: from n/a through 2.12.5. |
| Unauthenticated Insecure Direct Object References (IDOR) in Business Directory <= 6.4.26 versions. |
| nebula-mesh is a self-hosted control plane for Slack Nebula mesh VPN. From version 0.3.0 to before version 0.5.0, the nebula-mgmt Web UI host-creation path ignores both the server-wide enrollment_token_ttl security setting and per-network network_config.enrollment_token_ttl overrides. API host creation and token-regeneration paths use the configured TTL resolver, but POST /ui/hosts hardcodes now.Add(24 * time.Hour) for newly minted agent enrollment tokens. In deployments that intentionally reduce enrollment-token lifetime, any authenticated operator who can create a host through the Web UI can still mint a bearer enrollment token valid for about 24 hours. This issue has been patched in version 0.5.0. |
| The Smart Post WordPress plugin before 4.0.8 does not check the type, ownership or status of the post it is asked to duplicate, allowing users with contributor privileges and above to copy any private or password protected post into a draft of their own and read its content and metadata. |
| The Kirki WordPress plugin before 6.3.0 does not check that a user is allowed to act on a collaboration comment before changing its state, allowing users whom an administrator has granted content-level access to the page builder to modify comments left by other users, including on pages they cannot themselves open. |
| The Accept Stripe Payments WordPress plugin before 2.1.4 does not verify that the product fulfilled when a checkout is completed matches the product the authoritative payment was actually made for, checking only that the amount paid is at least the referenced product's price, allowing unauthenticated attackers who complete a genuine payment to obtain fulfilment for a different, equal- or lower-priced product than the one they paid for. |
| The Accept Stripe Payments WordPress plugin before 2.1.4 does not validate a user-supplied URL before using it in a redirect, allowing unauthenticated attackers to redirect visitors to an arbitrary external website, which can be leveraged for phishing. |
| Authorization bypass through user-controlled key in Microsoft Azure Active Directory B2C allows an unauthorized attacker to elevate privileges over a network. |
| A security flaw has been discovered in tsi-coop tsi-dpdp-cms up to 0.5.0. This vulnerability affects unknown code. The manipulation results in client-side enforcement of server-side security. The attack can be launched remotely. The exploit has been released to the public and may be used for attacks. Upgrading to version 0.5.1 is able to resolve this issue. It is recommended to upgrade the affected component. |
| PREVAIL is a Polynomial-Runtime EBPF Verifier using an Abstract Interpretation Layer. Prior to version 0.2.4, the abstract transformer in prevail treats writes through a T_CTX-typed base register as a silent no-op: do_mem_store in src/crab/ebpf_transformer.cpp only models T_STACK stores, and the checker's T_CTX bounds arm never tests AccessType::write. An attacker can craft an eBPF program that overwrites a context field (e.g., ctx->data), reload that field typed as T_PACKET, and dereference an attacker-controlled address — and prevail will report the program as safe. This issue has been patched in version 0.2.4. |
