| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: us122l: Prevent write upgrades for read mappings
The hwdep mmap callback rejects read-buffer mappings that are initially
writable, but leaves VM_MAYWRITE set on mappings created with PROT_READ.
A process that can open the hwdep node O_RDWR can later use mprotect() to
make the mapping writable.
The read allocation begins with struct usb_stream. Its read_size member is
used by the fault handler to decide which pages belong to the read buffer.
The read VMA intentionally remains expandable because pcm_usb_stream uses
mremap() after reading that size. Changing read_size first can therefore
map and access pages beyond the allocation. The same member is also
consumed by usb_stream_free(), where changing it can make
free_pages_exact() release pages outside the allocation.
Clear VM_MAYWRITE for read-buffer mappings after rejecting an initially
writable VMA. This keeps the separate output-buffer mapping writable while
preventing later permission upgrades. |
| In the Linux kernel, the following vulnerability has been resolved:
configfs: pin the symlink target's dirent instead of chasing ->ci_dentry
create_link() reads the target's configfs_dirent from
item->ci_dentry->d_fsdata, relying on the item reference taken by
get_target(). That reference pins the item, not its dentry: the dentry is
pinned by DCACHE_PERSISTENT, which configfs_remove_dir() releases via
simple_rmdir() while the item is still alive. A symlink racing with rmdir
of its target can therefore find ->ci_dentry freed and its dirent
released, triggering WARN_ON(!atomic_read(&sd->s_count)) in configfs_get().
Take the dirent in get_target() as well, under ->d_lock and atomically
with the item reference, and pass it down to create_link(). A hashed
dentry has not been killed yet, so its ->d_fsdata reference keeps the
dirent alive there. |
| In the Linux kernel, the following vulnerability has been resolved:
net/rds: fix tcp stream corruption with large pages
rds_message_map_pages() assigns PAGE_SIZE bytes to every
scatterlist entry, even when total_len ends in a partial page. The RDS
congestion map is defined as 8192 bytes, so on systems with PAGE_SIZE
greater than 8192 the scatterlist maps bytes beyond the end of the
congestion map. RDS-TCP transmits the SG contents according to those
lengths, so the extra bytes become part of the TCP RDS stream and are
interpreted as subsequent RDS message headers, corrupting the stream.
Limit the final scatterlist mapping to the number of bytes remaining.
This has no effect on systems with a 4K page size and allows RDS-TCP to
be used on systems with 16K and larger page sizes.
The RDS selftest, which previously hung on 16K pages, now passes. |
| In the Linux kernel, the following vulnerability has been resolved:
watchdog: msc313e: Fix clock leak and spurious timer in settimeout()
msc313e_wdt_settimeout() unconditionally calls msc313e_wdt_start() which
introduces two severe bugs:
1. If the watchdog is already active, calling start() again will
increase the reference count of the clock again. However stop() is
only called once, the reference count is unbalance.
2. If the watchdog is stopped, calling settimeout() will start
the hardware timer accidentally.
Factor out the register-writing logic into a helper function. Only call
it in settimeout() if the watchdog is running. Otherwise, simply update
`wdev->timeout`. |
| DB-GPT v0.8.0 sandbox API silently falls back to LocalRuntime and executes code on host. |
| The object name of a dynamically created BACnet File Object is interpreted as a file path without sufficient validation. Because relative paths are not limited to the intended directory, an unauthenticated remote attacker can traverse outside of it and read or overwrite arbitrary files on the device, which may lead to full system compromise. |
| In the Linux kernel, the following vulnerability has been resolved:
tracing: Set the trace clock before registering the histogram trigger
hist_register_trigger() puts the trigger on the global named_triggers
list in cmd_ops->init(), and only then sets the trace clock:
if (data->cmd_ops->init) {
ret = data->cmd_ops->init(data);
if (ret < 0)
goto out;
}
if (hist_data->enable_timestamps) {
ret = tracing_set_clock(file->tr, hist_data->attrs->clock);
if (ret) {
hist_err(tr, HIST_ERR_SET_CLOCK_FAIL, errpos(clock));
goto out;
}
The clock string is not checked anywhere before that call, so a named
trigger using common_timestamp with an unknown clock fails after it has
already become findable. event_hist_trigger_parse() then frees it
without taking it off the list, and the next lookup by name reads the
freed object:
~# cd /sys/kernel/tracing/events/sched/sched_switch
~# echo 'hist:name=foo:keys=common_pid:ts=common_timestamp:clock=bogus' > trigger
bash: echo: write error: Invalid argument
~# echo 'hist:name=foo:keys=common_pid' > trigger
BUG: KASAN: slab-use-after-free in find_named_trigger+0xac/0xc0
Read of size 8 at addr ffff88800915d760 by task init/1
find_named_trigger+0xac/0xc0
hist_register_trigger+0xc1/0x900
event_hist_trigger_parse+0x3146/0x6af0
event_trigger_write+0xce/0x160
Freed by task 63:
kfree+0x154/0x420
trigger_kthread_fn+0xfd/0x160
Set the clock before the trigger is registered, so that nothing which
can fail runs after it is published, the way commit 6f86bdeab633
("tracing: Fix bad hist from corrupting named_triggers list") moved the
registration below the rest of the setup.
tracing_set_filter_buffering() is reference counted, so the init failure
path has to drop the reference that the clock block now takes first. |
| In the Linux kernel, the following vulnerability has been resolved:
tracing: Fix memory corruption from the histogram stacktrace modifier
parse_field() sets HIST_FIELD_FL_STACKTRACE from the ".stacktrace"
modifier before it looks the field name up, and nothing afterwards
checks that the name resolved to a field which holds a stacktrace.
create_hist_field() picks HIST_FIELD_FN_STACK on the strength of the
field pointer alone, which reads a __data_loc word from the record and
follows its low 16 bits as an offset into the same record.
event_hist_trigger() takes the first word there as an entry count and
copies that many longs into a 31 entry array:
n_entries = *stack;
memcpy(entries, ++stack, n_entries * sizeof(unsigned long));
Neither end of that copy is bounded, and the count is whatever the event
holds at the offset, so any field will do:
# cd /sys/kernel/tracing/events/sched/sched_process_fork
# echo 'hist:keys=parent_pid.stacktrace' > trigger
# (true)
BUG: kernel NULL pointer dereference, address: 0000000000000008
RIP: 0010:rb_insert_color+0x18/0x130
timerqueue_linked_add+0x7e/0xd0
enqueue_hrtimer+0x39/0xb0
__hrtimer_run_queues+0x10f/0x1f0
</IRQ>
RIP: 0010:memcpy+0xc/0x30
event_hist_trigger+0x165/0x690
The timer interrupt landed on the rbtree the copy had already run over.
No debug options are needed for this; KASAN reports the same write as an
out-of-bounds read of 13835058055416381440 bytes.
Documentation/trace/histogram.rst already states the rule, "must be a
long[] type", so enforce it once the name has been resolved. Names which
resolve to no field at all, "hitcount.stacktrace" and the common_*
pseudo-fields, are refused for the same reason: they hold no stacktrace
to read. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: fix fib6 walker UAF on seq stop
ipv6_route_iter_active() treats a walker in FWS_U at the table root as
already unlinked. fib6_del_route() can move a still-linked walker into
that same state when the current leaf is the last route at the root,
so ipv6_route_native_seq_stop() skips fib6_walker_unlink(). The seq
private object can then be freed while it remains on
net->ipv6.fib6_walkers. A later route deletion walks the dangling list
and uses the freed walker.
Use the list head as membership state and reinitialize it when
unlinking. Keep the existing w->node check so a never-started iterator
with a zeroed private object is not treated as linked.
The same stop helper is used by /proc/net/ipv6_route and by the BPF
ipv6_route iterator. The BPF show path only widens the race. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/slab: take n->list_lock in __slab_try_return_freelist() to avoid race
Commit ba7425312607 ("mm, slab: add an optimistic
__slab_try_return_freelist()") incorrectly assumed that nobody has freed
an object to the slab as long as slab->freelist is NULL and cmpxchg
succeeds.
However, as reported by Hyunwoo Kim [1], other CPUs might have freed
an object to the slab, insert the slab to the partial list, then
allocated an object from the slab, and be in the middle of removing
the slab from the list under n->list_lock.
Since __refill_objects_node() puts the slab back on pc.slabs
outside n->list_lock, it might insert the slab into that list while
the slab is concurrently being removed from n->partial.
This led to a list corruption [1]:
list_add corruption. next->prev should be prev
(ffff888100000248), but was dead000000000122.
(next=ffffea000416e410).
kernel BUG at lib/list_debug.c:29!
Oops: invalid opcode: 0000 [#1] SMP NOPTI
CPU: 1 UID: 65534 PID: 144 Comm: poc Not tainted
7.2.0-16172-gcf72cbb39da8-dirty #1 PREEMPT(lazy)
RIP: 0010:__list_add_valid_or_report+0x80/0xd0
...
Call Trace:
alloc_from_new_slab+0x183/0x300
___slab_alloc+0x31c/0x890
__kmalloc_noprof+0x3d4/0x800
lsm_blob_alloc+0x2d/0x50
security_msg_msg_alloc+0x26/0x90
load_msg+0x1aa/0x210
do_msgsnd+0x91/0x800
do_syscall_64+0x109/0x5d0
entry_SYSCALL_64_after_hwframe+0x77/0x7f
...
Kernel panic - not syncing: Fatal exception
This is a classic ABA problem where cmpxchg succeeds but the state has
changed since __refill_objects_node() took the freelist from the slab.
As Vlastimil Babka mentioned [2], it should be rare to return more than
one slab (due to the racy read of slab->counters in
get_partial_node_bulk()). Therefore, instead of introducing additional
complexity, acquire and release n->list_lock twice in the worst case.
Return the slab directly to the partial list and hold n->list_lock
across the cmpxchg and add_partial(). This is similar to the initial
version of commit ba7425312607 [3]. This is enough to avoid the race as
the list manipulation is serialized by n->list_lock. While at it,
bring back unlikely() hint now that the condition is unlikely. |
| bisheng 2.3.0, 2.4.0, and 2.4.0-beta1 is vulnerable to Code Injection in src/backend/bisheng/api/v1/validate.py. |
| DB-GPT 0.8.0 contains directory traversal in skill_upload (packages/dbgpt-app/src/dbgpt_app/openapi/api_v1/agentic_data_api.py:40). A remote attacker can use the validated exploitation path to write files outside the intended workspace or storage boundary. |
| DeepWiki-Open through commit d92819a contains an unauthenticated arbitrary file read vulnerability in the GET /codemap/file endpoint via the repo_url parameter. Attackers can supply a non-URL repo_url value to bypass path containment checks and read any file accessible to the API process by specifying absolute file paths. |
| In the Linux kernel, the following vulnerability has been resolved:
x86/cfi: Fix FineIBT hash offset in cfi_get_func_hash()
The switch of the FineIBT preamble from "subl $hash, %r10d" to the
shorter "subl $hash, %eax" moved the hash immediate from offset 7 to
offset 5 of the preamble. fineibt_preamble_hash was updated to match,
but the open-coded offset in cfi_get_func_hash() was missed and it
still reads the hash at offset 7.
cfi_get_func_hash() is used by the BPF JIT to give a struct_ops
trampoline the CFI hash of the stub function it stands in for. With
FineIBT the trampoline now gets the upper half of the real hash
followed by the first two bytes of the next instruction, so the first
indirect call from the kernel into a struct_ops program,
tcp_init_congestion_control() calling ->init() of a BPF congestion
control for example, fails the FineIBT check and the kernel dies with
a CFI failure.
Move the FineIBT preamble template and its offset defines above
cfi_get_func_hash() and use fineibt_preamble_hash there, so every
reader of the preamble shares one definition of its layout. The
CFI_FINEIBT arm is only built with CONFIG_FINEIBT, the only
configuration in which cfi_mode can take that value.
cfi_get_func_arity() does not need the same treatment: the __bhi_args
call whose displacement it reads still ends at the function address. |
| In the Linux kernel, the following vulnerability has been resolved:
x86/mm: Fix user-space data loss with MADV_FREE and THP
Some of users of Polars (a data analytics library) have lost production
data from this bug. They seem to have just the right combination of
huge pages, MADV_FREE and heavy reclaim pressure.
pmd_modify() masks the old value with (_HPAGE_CHG_MASK & ~_PAGE_DIRTY),
silently discarding the hardware dirty bit. The subsequent
pmd_mksaveddirty() call is supposed to transfer _PAGE_DIRTY into
_PAGE_SAVED_DIRTY when write-protecting, but the dirty bit was already
stripped from the value, so there is nothing left to transfer.
Contrast with pte_modify(), which keeps _PAGE_DIRTY_BITS in its mask,
and pud_modify(), which keeps _HPAGE_CHG_MASK untouched: pmd_modify()
is the odd one out. Any pmd_modify() on a writable, dirty PMD loses
the dirty state.
One visible consequence is data loss with MADV_FREE on PMD-mapped THP:
memset(buf, 0x5A, size); // PMD-mapped THP, PMD dirty
madvise(buf, size, MADV_FREE); // PMD cleaned but left writable,
// folio marked lazyfree
memset(buf, 0x5A, size); // hardware sets _PAGE_DIRTY again
mprotect(buf, size, PROT_READ); // pmd_modify() drops the dirty bit
mprotect(buf, size, PROT_READ|PROT_WRITE);
// ... memory pressure ...
Reclaim (e.g. under memcg pressure) then finds the lazyfree folio with
no dirty bit set anywhere and frees it in
__discard_anon_folio_pmd_locked(), even though the data was rewritten
after MADV_FREE; subsequent reads fault in fresh zero pages. NUMA
hinting alone can trigger the same loss, as do_huge_pmd_numa_page()
restores the PMD through pmd_modify() as well.
PMD-mapped file THPs are affected too: mprotect()/NUMA hinting dropping
the dirty bit means rewritten data is never written back.
Fix it by keeping _PAGE_DIRTY in the preserved mask, exactly like
pte_modify() and pud_modify() do. The existing
pmd_mksaveddirty()/pmd_clear_saveddirty() pair then performs the
hardware-dirty <-> saved-dirty transition based on the write bit,
preserving the shadow-stack encoding rules. |
| In the Linux kernel, the following vulnerability has been resolved:
x86/amd_node: Fix PCI device reference counting in amd_smn_init()
The local "root" pointer is a temporary variable used during the device
search. Therefore, refcount related to the search iterators should be cleaned
up after the search is complete.
Use the __free() cleanup macro to ensure the refcount is decremented when the
temporary pointer goes out of scope.
Additionally, increment the refcount when caching a root pointer. This ensures
the in-use refcount is separate from the temporary search refcounting.
Finally, drop the redundant "root = NULL" before the second search loop. The
pci_get_class() iterator always decrements the refcount of its "from"
argument, so the first loop can only fall through with "root" already NULL. |
| In the Linux kernel, the following vulnerability has been resolved:
powerpc/eeh: Fix recursive locking on devices without EEH sensitive driver
The commit 1010b4c012b0 ("powerpc/eeh: Make EEH driver device hotplug
safe") refactored the EEH code such that the pci_rescan_remove_lock is
held at the beginning of eeh_handle_normal_event() and the
eeh_reset_device() is called with that lock being held. Looks like the
commit missed to remove the existing lock/unlock inside eeh_rmv_device()
which is no longer necessary. This is causing the eehd to hang on the
lock which it actually holds when that code path is taken.
[<0>] 0xc00000011c78f870
[<0>] __switch_to+0xfc/0x1a0
[<0>] pci_lock_rescan_remove+0x30/0x44
[<0>] eeh_rmv_device+0x290/0x2e0
[<0>] eeh_pe_dev_traverse+0x80/0x130
[<0>] eeh_reset_device+0xcc/0x23c
[<0>] eeh_handle_normal_event+0x830/0xa80
[<0>] eeh_event_handler+0xf8/0x190
[<0>] kthread+0x194/0x1b0
[<0>] start_kernel_thread+0x14/0x18
The issue is seen for cases where the errors are detected on the PHB
directly AND|OR for devices where the driver error_detected() returns
PCI_ERS_RESULT_NEED_RESET, and driver being not EEH sensitive(i.e no
error handlers like slot_reset(), resume() etc defined). |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: target: iscsi: Fix hang for aborted WRITE_PENDING commands
When a LUN_RESET aborts a WRITE command that is in the
TRANSPORT_WRITE_PENDING state, the target core sets CMD_T_ABORTED and
waits for the frontend to finish processing.
If the initiator subsequently sends the remaining dataout PDUs,
__iscsit_check_dataout_hdr() catches the payload, stops the dataout
timer if the sequence is final and finally dumps the data. However, the
iSCSI target doesn't trigger the completion process for these aborted
commands. Because of this, the abort path hangs indefinitely in
target_put_cmd_and_wait(), leading to a deadlocked target worker thread.
Fix this by explicitly calling target_complete_cmd() when the final
dataout PDU is received for an aborted WRITE command.
target_complete_cmd() detects the CMD_T_ABORTED flag and cleanly routes
the command into target_abort_work, allowing the abort completion to
successfully unblock. |
| In the Linux kernel, the following vulnerability has been resolved:
sunvdc: unmap LDC cookies when the descriptor send fails
__send_request() maps the request's pages into the LDC channel's map
table (ldc_map_sg()), fills in the descriptor and marks it
VIO_DESC_READY before ringing the doorbell via __vdc_tx_trigger().
When the trigger fails, the error path only prints a message: the
descriptor stays READY and the cookies are never unmapped. The
mapping is normally released in vdc_end_one() when the peer completes
the descriptor - but a descriptor whose doorbell was never sent will
never complete, and since dr->prod is not advanced on failure, the
reset path (vdc_requeue_inflight(), which walks [cons, prod)) never
visits it either. The map table entries are leaked permanently.
Since commit a11f6ca9aef9 ("sunvdc: Do not spin in an infinite loop
when vio_ldc_send() returns EAGAIN") trigger failures occur in
practice under load, so every resulting I/O error also leaks one
request's worth of entries from the fixed-size (8192 entries per
channel) map table. Because the allocator hands out contiguous
ranges, fragmentation makes large multi-segment requests fail first
as the table drains, until ldc_map_sg() fails permanently and the
disk is dead until reboot.
It also makes any retry-based recovery unusable: requeuing the
request on -EAGAIN remaps the pages on every attempt, overwriting
desc->cookies and orphaning the previous mapping, so the table
drains at the retry rate. This is the memory exhaustion observed
when the requeue approach was first tested in October 2025.
Roll back on failure: unmap the cookies, mark the descriptor FREE
again and clear the request entry. If the trigger failed with
-ENOTCONN, __vdc_tx_trigger() has already reset the port, which
tears down and reallocates both the dring and the LDC channel
including its map table - nothing to roll back, and the stale
descriptor must not be touched. |
| In the Linux kernel, the following vulnerability has been resolved:
net: mana: restore the XDP program pointer when pre-allocation fails
mana_xdp_set() publishes the new program into apc->bpf_prog before it
allocates anything, because mana_pre_alloc_rxbufs() sizes the buffers
from it via mana_get_rxbuf_cfg(). When that allocation fails the
function returns the error directly, skipping the err_dealloc_rxbuffs
label which is the only place that restores the previous pointer.
The attach is reported as failed, so the BPF core drops the reference it
held for the caller and the program can be freed, while apc->bpf_prog
still points at it. The next consumer of mana_xdp_get() - typically
mana_chn_setxdp() from mana_alloc_queues() on the following ifup, or
after a TX timeout reset - then calls bpf_prog_add() on freed memory.
This is reachable from an ordinary "ip link set dev ethX xdp obj ..."
whenever the per-queue RX buffer pre-allocation cannot be satisfied.
Restore the previous program on that error path. |
