| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ceph: fix integer overflow in the snap trace bounds check
ceph_update_snap_trace() bounds the two encoded snapid arrays that follow a
struct ceph_mds_snap_realm with sizeof(u64) * (num_snaps +
num_prior_parent_snaps). Both counts come straight off the wire as __le32,
so the addition is evaluated in unsigned int and wraps before sizeof(u64)
promotes it to size_t: an MDS sending num_snaps = 1 and
num_prior_parent_snaps = 0xffffffff makes the sum zero and the check
degenerates to ceph_decode_need(&p, e, 0, bad), which always passes.
dup_array() then reads num_snaps * 8 bytes past the end of the message
front, which ceph_msg_new2() allocates at exactly front_len bytes. An
unsolicited CEPH_MSG_CLIENT_SNAP reaches this from a malicious or
compromised MDS with no client-side action, as do the snaptraces carried in
an MDS reply and in a cap import.
Compute the length with size_add()/size_mul() so it saturates at SIZE_MAX
instead of wrapping, in the style fs/ceph/mdsmap.c already uses for
num_export_targets.
BUG: KASAN: slab-out-of-bounds in dup_array (include/linux/unaligned.h:28 fs/ceph/snap.c:500)
Read of size 8 at addr ffff8880102a16c8 by task kworker/1:2/129
Workqueue: ceph-msgr ceph_con_workfn
Call Trace:
dump_stack_lvl (lib/dump_stack.c:94 lib/dump_stack.c:120)
print_report (mm/kasan/report.c:378 mm/kasan/report.c:482)
kasan_report (mm/kasan/report.c:595)
dup_array (include/linux/unaligned.h:28 fs/ceph/snap.c:500)
ceph_update_snap_trace (fs/ceph/snap.c:836)
ceph_handle_snap (fs/ceph/snap.c:1155)
mds_dispatch (fs/ceph/mds_client.c:7234)
ceph_con_process_message (net/ceph/messenger.c:1424)
ceph_con_v1_try_read (net/ceph/messenger_v1.c:1430)
ceph_con_workfn (net/ceph/messenger.c:1576)
process_one_work (kernel/workqueue.c:3396)
worker_thread (kernel/workqueue.c:3479 kernel/workqueue.c:3560)
kthread (kernel/kthread.c:436)
ret_from_fork (arch/x86/kernel/process.c:158)
ret_from_fork_asm (arch/x86/entry/entry_64.S:245)
...
The buggy address is located 0 bytes to the right of
allocated 72-byte region [ffff8880102a1680, ffff8880102a16c8) |
| In the Linux kernel, the following vulnerability has been resolved:
media: em28xx: fix double free in em28xx_alloc_urbs
When allocation of usb_bufs->buf[i] fails, em28xx_alloc_urbs()
explicitly frees all items within usb_bufs->buf before calling
em28xx_uninit_usb_xfer(), which also frees these items, causing them to be
freed twice.
BUG: KASAN: double-free in usb_free_urb.part.0 (drivers/usb/core/urb.c:25 ./include/linux/kref.h:65 drivers/usb/core/urb.c:96)
Free of addr ffff88802fd37c00 by task kworker/1:2/1182
Workqueue: events request_module_async
Call Trace:
kasan_report_invalid_free (mm/kasan/report.c:557)
check_slab_allocation (mm/kasan/common.c:235)
kfree (./include/linux/kasan.h:199 (discriminator 1) mm/slub.c:2693 (discriminator 1) mm/slub.c:6508 (discriminator 1) mm/slub.c:6801 (discriminator 1))
usb_free_urb.part.0 (drivers/usb/core/urb.c:25 ./include/linux/kref.h:65 drivers/usb/core/urb.c:96)
usb_free_urb (drivers/usb/core/urb.c:95)
em28xx_uninit_usb_xfer (drivers/media/usb/em28xx/em28xx-core.c:964)
em28xx_alloc_urbs (drivers/media/usb/em28xx/em28xx-core.c:1076)
em28xx_dvb_init (drivers/media/usb/em28xx/em28xx-dvb.c:1734 drivers/media/usb/em28xx/em28xx-dvb.c:1698)
em28xx_init_extension (drivers/media/usb/em28xx/em28xx-core.c:1248)
request_module_async (drivers/media/usb/em28xx/em28xx-cards.c:3685)
process_one_work (kernel/workqueue.c:3396)
worker_thread (kernel/workqueue.c:3479 kernel/workqueue.c:3560)
kthread (kernel/kthread.c:436)
ret_from_fork (arch/x86/kernel/process.c:158)
ret_from_fork_asm (arch/x86/entry/entry_64.S:245)
Allocated by task 1182:
kasan_save_stack (mm/kasan/common.c:57)
kasan_save_track (mm/kasan/common.c:78)
__kasan_kmalloc (mm/kasan/common.c:398 mm/kasan/common.c:415)
__kmalloc_noprof (./include/linux/kasan.h:263 mm/slub.c:5414 mm/slub.c:5439)
em28xx_alloc_urbs (./include/linux/slab.h:995 ./include/linux/slab.h:1312 drivers/media/usb/em28xx/em28xx-core.c:1081)
em28xx_dvb_init (drivers/media/usb/em28xx/em28xx-dvb.c:1734 drivers/media/usb/em28xx/em28xx-dvb.c:1698)
em28xx_init_extension (drivers/media/usb/em28xx/em28xx-core.c:1248)
request_module_async (drivers/media/usb/em28xx/em28xx-cards.c:3685)
process_one_work (kernel/workqueue.c:3396)
worker_thread (kernel/workqueue.c:3479 kernel/workqueue.c:3560)
kthread (kernel/kthread.c:436)
ret_from_fork (arch/x86/kernel/process.c:158)
ret_from_fork_asm (arch/x86/entry/entry_64.S:245)
Freed by task 1182:
kasan_save_stack (mm/kasan/common.c:57)
kasan_save_track (mm/kasan/common.c:78)
kasan_save_free_info (mm/kasan/generic.c:584)
__kasan_slab_free (mm/kasan/common.c:253 mm/kasan/common.c:285)
kfree (./include/linux/kasan.h:235 mm/slub.c:2748 mm/slub.c:6508 mm/slub.c:6801)
em28xx_alloc_urbs (drivers/media/usb/em28xx/em28xx-core.c:1084)
em28xx_dvb_init (drivers/media/usb/em28xx/em28xx-dvb.c:1734 drivers/media/usb/em28xx/em28xx-dvb.c:1698)
em28xx_init_extension (drivers/media/usb/em28xx/em28xx-core.c:1248)
request_module_async (drivers/media/usb/em28xx/em28xx-cards.c:3685)
process_one_work (kernel/workqueue.c:3396)
worker_thread (kernel/workqueue.c:3479 kernel/workqueue.c:3560)
kthread (kernel/kthread.c:436)
ret_from_fork (arch/x86/kernel/process.c:158)
ret_from_fork_asm (arch/x86/entry/entry_64.S:245)
Remove the explicit cleanup loop and let em28xx_uninit_usb_xfer()
handle the cleanup. |
| In the Linux kernel, the following vulnerability has been resolved:
libceph: bound mon_command ack decode to front len
handle_command_ack() bounds the decode with msg->front_alloc_len, the size
of the reply buffer, instead of msg->front.iov_len, the number of bytes the
monitor sent. mon_alloc_msg() routes every CEPH_MSG_MON_COMMAND_ACK to
get_generic_reply(), which returns the preallocated ->reply of whichever
generic request carries the same tid, so the buffer keeps its fixed size
however short the reply is. An ack with hdr.front_len below sizeof(struct
ceph_mon_request_header) + sizeof(u32), including 0, still passes
ceph_decode_need(), and ceph_decode_32() returns four bytes that were never
received: uninitialized slab memory, stale bytes of an earlier message, or
bytes the peer planted by sending a reply that lands in the same buffer and
is then rejected. The read stays within the allocation, so KASAN does not
flag it.
req->result reaches userspace through ceph_monc_do_statfs(),
ceph_monc_get_version() and ceph_monc_blocklist_add(); rbd hands it back
from write() on /sys/bus/rbd/add_single_major, and rbd_get_client() passes
it to ERR_PTR() unchecked, which faults:
rbd: failed to get latest osdmap: -186318427
BUG: unable to handle page fault for address: fffffbfffe9ca034
Oops: Oops: 0000 [#1] SMP KASAN NOPTI
RIP: 0010:do_rbd_add (drivers/block/rbd.c:7105)
Call Trace:
...
kernfs_fop_write_iter (fs/kernfs/file.c:345)
vfs_write (fs/read_write.c:595 fs/read_write.c:687)
ksys_write (fs/read_write.c:739)
do_syscall_64 (arch/x86/entry/syscall_64.c:61 arch/x86/entry/syscall_64.c:84)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121)
Kernel panic - not syncing: Fatal exception
Use msg->front.iov_len, matching handle_subscribe_ack(),
handle_statfs_reply(), handle_get_version_reply() and handle_auth_reply().
A well-formed ack has front.iov_len >= 22 and is unaffected; a short one
takes the existing bad: path. This applies commit d3c32939fa0e ("libceph:
bound get_version reply decode to front len") to the last decode-side
use of front_alloc_len in this file. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: stop processing a read response after a receive error
cifs_read_iter_from_socket() may call cifs_reconnect() before returning an
error. The reconnect path aborts pending mids and invokes their callbacks.
The callback can then release the cifs_io_subrequest containing rdata.
cifs_readv_receive() nevertheless continues after a negative return and may
dereference rdata in cifs_readv_discard(). KASAN reports the resulting
UAF:
BUG: KASAN: slab-use-after-free in cifs_readv_receive
Read of size 4 by task cifsd
cifs_readv_receive (fs/smb/client/transport.c:1284)
cifs_demultiplex_thread (fs/smb/client/connect.c:1355)
kthread (kernel/kthread.c:436)
ret_from_fork (arch/x86/kernel/process.c:158)
Freed by task 148:
netfs_put_subrequest (fs/netfs/objects.c:267)
netfs_read_collection (fs/netfs/read_collect.c:460)
netfs_wait_for_in_progress (fs/netfs/misc.c:462)
Return the socket error immediately, as this path did before the iterator
conversion. This also avoids adding a negative length to total_read. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix slab-out-of-bounds write in id_mode_to_cifs_acl()
In id_mode_to_cifs_acl(), while the chown branch reserves
sizeof(struct smb_ntsd) + 2 * sizeof(struct smb_sid) (plus
sizeof(struct smb_acl) and the worst-case ACE space after
commit 0ee150794c75 ("smb: client: fix heap overflow in DACL owner/group
rewrite")), the chmod branch only adds 2 * sizeof(struct smb_ace) or
5 * sizeof(struct smb_ace) to secdesclen (or 1 * sizeof(struct smb_ace)
on posix).
However, the chmod branch also invokes build_sec_desc() ->
copy_sec_desc(), which unconditionally writes the Owner SID at
pnntsd + sidsoffset and the Group SID at
pnntsd + sidsoffset + sizeof(struct smb_sid) (2 * 68 = 136 bytes total),
and set_chmod_dacl() always writes a struct smb_acl header (8 bytes)
even when the source descriptor has dacloffset == 0. When a security
descriptor has compact or overlapping Owner/Group SIDs (or
dacloffset == 0), calling chmod() under-allocates pnntsd and writes past
the end of the slab buffer.
Reserve sizeof(struct smb_acl) + 2 * sizeof(struct smb_sid) (plus
sizeof(struct smb_ntsd) on the posix path) in the chmod branch of
id_mode_to_cifs_acl(). |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix SMB2 CREATE response buffer overflow
smb2_allocate_rsp_buf() uses the MAX_CIFS_SMALL_BUFFER_SIZE
(448-byte) buffer for a single SMB2_CREATE response. That buffer also
holds a 4-byte length field, which only leaves 444 bytes for the SMB2
body.
The AAPL response made this buffer too small. After 8f1b796ff113, a
request with AAPL response contexts may need at least 456 bytes. In
the 456-byte case, create_aapl_rsp_buf() is appended last, clears 128
bytes, and writes 12 bytes past the allocation.
KASAN reports:
BUG: KASAN: slab-out-of-bounds in create_aapl_rsp_buf+0x31/0x6e0
Write of size 128 at addr ffff88800370954c by task kworker/0:0/9
...
create_aapl_rsp_buf+0x31/0x6e0
smb2_open+0x58f9/0xef10
...
smb2_allocate_rsp_buf+0x19d/0x370
...
The buggy address is located 332 bytes inside of
allocated 448-byte region [ffff888003709400, ffff8880037095c0)
Reserve enough space for any fixed CREATE response KSMBD can build.
Store the required allocation size in the per-dialect values table.
This keeps the small buffer for other commands and avoids using the max
transaction buffer for every CREATE. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix use-after-free after a failed durable reconnect
ksmbd_reopen_durable_fd() republishes a detached durable handle in the
reconnecting session's file table and takes no reference for that entry.
If smb2_open() then fails, cleanup relies on the final ksmbd_fd_put() to
remove the volatile id.
Two reconnects of the same handle can both take a lookup reference before
either attaches it. If the one that reopens first then fails and drops
its references first, the other request makes the final put through
ksmbd_put_durable_fd(). That frees the handle without removing the first
session's table entry, so tearing that session down writes to freed
memory.
BUG: KASAN: slab-use-after-free in __close_file_table_ids+0x14d/0x740 [ksmbd]
Call Trace:
__close_file_table_ids+0x14d/0x740 [ksmbd]
ksmbd_destroy_file_table+0x76/0x100 [ksmbd]
ksmbd_session_destroy+0xf8/0x480 [ksmbd]
ksmbd_dispose_sessions+0x13e/0x200 [ksmbd]
ksmbd_conn_sessions_cleanup+0x4c3/0x6d0 [ksmbd]
Freed by task 1030:
__ksmbd_close_fd+0x97d/0x1000 [ksmbd]
smb2_open+0x14eb/0xd9f0 [ksmbd]
Commit 3515503322f4 ("ksmbd: fix durable reconnect error path file
lifetime") handles a final put made by the reconnecting request, but not
one made by another holder.
Remove the volatile id under the file-table lock on this error path,
before the references are dropped, as ksmbd_close_fd() does on the
request_open path just above. Removal then no longer depends on which
holder makes the final put. The stale comment in the reconnect cleanup
is updated to match. A successful reconnect is unchanged. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix app-instance non-durable supersede session UAF
ksmbd_close_fd_app_instance_id() supersedes a prior open that has the
same AppInstanceId. It reaches that open's session through opinfo->sess.
This pointer is not refcounted.
Session teardown detaches durable handles before it frees the session.
It does not detach a non-durable open. That open still points at the
session through opinfo->sess after the session is freed. Another session
can supersede the open at the same time. The supersede then takes a
write lock through the stale pointer, in the freed session's file table.
BUG: KASAN: slab-use-after-free in _raw_write_lock+0x71/0xd0
Call Trace:
_raw_write_lock+0x71/0xd0
ksmbd_close_fd_app_instance_id+0xd9/0x670 [ksmbd]
smb2_open+0x3e10/0xd910 [ksmbd]
Freed by task 212:
ksmbd_session_destroy+0x38d/0x480 [ksmbd]
Fix this by looking the session up by opinfo->session_id. The lookup
returns a reference, as smb2_break_collect_channels() does. Recheck that
opinfo->sess still points at it before using it.
Do the lookup without m_lock held. destroy_previous_session() takes
m_lock under the session table lock, and taking them in the other order
here would deadlock. |
| In the Linux kernel, the following vulnerability has been resolved:
inet: reject unhashed sockets during established lookups
TCP established ehash lookups are lockless. The socket caches involved
use SLAB_TYPESAFE_BY_RCU, so memory can be reused before an RCU reader
that retained its old address has finished.
After a tuple match, __inet_lookup_established() and
__inet6_lookup_established() acquire a reference and repeat the tuple
check. They do not check whether the new object is hashed. If the
address is reused for a socket with the same tuple, the lookup can
acquire a reference to the new object and return it while its nulls node
is unhashed.
A PoC that drives reuse with a SYN cookie request socket reproduced the
crash. The new request socket is unhashed and has a NULL rsk_listener.
A lookup that had loaded the address of the old request socket acquired
the reference published by tcp_get_cookie_sock() and returned the new
object. tcp_v4_rcv() then read sk_state through the NULL listener.
The resulting crash was:
BUG: kernel NULL pointer dereference, address: 0000000000000012
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
...
Oops: Oops: 0000 [#1] SMP NOPTI
CPU: 4 UID: 0 PID: 0 Comm: swapper/4 Not tainted 7.3.0-00591-g0e135910deec #1 PREEMPT(lazy)
...
RIP: 0010:tcp_v4_rcv+0x44e/0x1280
...
R10: 0000000000000001 R11: 00000000024ca8c0 R12: 0000000000000000
...
CR2: 0000000000000012 CR3: 0000000103d50004 CR4: 0000000000770ef0
...
Call Trace:
<IRQ>
? raw_local_deliver+0xae/0x240
ip_protocol_deliver_rcu+0x2d/0x180
ip_local_deliver_finish+0x84/0x100
ip_sublist_rcv_finish+0x5f/0x70
ip_sublist_rcv+0x12a/0x1d0
ip_list_rcv+0xfd/0x130
__netif_receive_skb_list_core+0x223/0x250
netif_receive_skb_list_internal+0x1d2/0x2c0
? try_fill_recv+0x39/0x7b0
napi_complete_done+0x74/0x170
virtnet_poll+0x445/0x600
__napi_poll+0x27/0x1e0
net_rx_action+0x2fe/0x3b0
handle_softirqs+0xc2/0x2c0
__irq_exit_rcu+0x74/0xd0
common_interrupt+0x7f/0x90
</IRQ>
...
Kernel panic - not syncing: Fatal exception in interrupt
After taking a reference, check whether the nulls node is unhashed in
both IPv4 and IPv6 established lookups. If it is unhashed or the tuple
no longer matches, drop the reference and restart the lookup.
Lookups racing with the TIME_WAIT hashdance, or with a request being
replaced by its child, now restart and find the new socket instead of
returning the old one.
Request sockets that were never inserted into ehash can have a nonzero
refcount, and a stale lookup can hold a transient reference. Therefore,
when SYN cookie, Fast Open, and request migration paths fail after
setting a nonzero refcount, release the references held by those paths
with reqsk_put() instead of freeing the request directly. |
| Incorrect authorization in SurfaceCapture in Google Chrome prior to 158.0.8127.36 allowed a remote attacker leveraging social engineering to obtain sensitive information via a crafted Chrome extension. (Chromium security severity: Low) |
| Incorrect authorization in Extensions in Google Chrome prior to 158.0.8127.36 allowed a remote attacker to obtain sensitive information via a crafted HTML page. (Chromium security severity: Low) |
| Vulnerability in the Oracle Hyperion Infrastructure Technology product of Oracle Hyperion (component: Common Security). The supported version that is affected is 11.2.26.0.000. Difficult to exploit vulnerability allows low privileged attacker with network access via HTTP to compromise Oracle Hyperion Infrastructure Technology. Successful attacks of this vulnerability can result in unauthorized creation, deletion or modification access to critical data or all Oracle Hyperion Infrastructure Technology accessible data as well as unauthorized access to critical data or complete access to all Oracle Hyperion Infrastructure Technology accessible data. CVSS 3.1 Base Score 6.8 (Confidentiality and Integrity impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:N). |
| Vulnerability in the Oracle Hyperion Infrastructure Technology product of Oracle Hyperion (component: Installation and Configuration). The supported version that is affected is 11.2.26.0.000. Difficult to exploit vulnerability allows low privileged attacker with network access via HTTP to compromise Oracle Hyperion Infrastructure Technology. Successful attacks of this vulnerability can result in takeover of Oracle Hyperion Infrastructure Technology. CVSS 3.1 Base Score 7.5 (Confidentiality, Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H). |
| Verifying a maliciously crafted CMS or PKCS#7 SignedData message with CRL checking enabled may consume excessive CPU time, growing with the square of the message size. |
| Dell PowerStore SDNAS contains an OS Command Injection vulnerability that could allow an attacker with internal network access to execute arbitrary commands as root on the NAS node. |
| Dell PowerStore SDNAS contains an out-of-bounds write vulnerability in the storage-processor interconnect driver that could allow a malicious peer to execute code with system privileges. |
| A flaw was found in ansible-core. When a task or its parameters are marked no_log: true, sensitive values passed to a module's warn() or deprecate() calls are not redacted and are printed in cleartext to stdout/stderr in warning and deprecation messages. The 'warnings' and 'deprecations' keys are retained in the PRESERVE allow-list in lib/ansible/_internal/_task.py when the task result is censored, so sensitive parameters bypass masking and can be disclosed in output captured in terminal sessions, CI logs, and any automation wrapping ansible-playbook, even though every task touching the secrets is marked no_log: true. |
| In JetBrains TeamCity before 2026.2.1, 2026.1.5 stored XSS in the GitHub App repository selector was possible |
| Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in WP Chill Strong Testimonials strong-testimonials allows Stored XSS.This issue affects Strong Testimonials: from n/a through 3.3.18. |
| In JetBrains TeamCity before 2026.2.2, 2026.1.6 remote code execution was possible via local repository URLs in Subversion VCS roots |