| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
irqchip/ts4800: Fix missing chained handler cleanup on remove
The driver installs a chained handler for the parent interrupt during probe
using irq_set_chained_handler_and_data(), but the remove function does not
clear this handler. This leaves a dangling handler that may be called when
the parent interrupt fires after the driver has been removed, potentially
accessing freed memory and causing a kernel crash.
Additionally, the parent_irq obtained via irq_of_parse_and_map() is not
stored, making it inaccessible in the remove function. Moreover, interrupt
mappings created during probe are not properly disposed.
Fix this by:
- Saving parent_irq in probe
- Clearing the chained handler with NULL in ts4800_ic_remove()
- Disposing all IRQ mappings before domain removal to prevent resource
leaks |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: sch_teql: Introduce slaves_lock to avoid race condition and UAF
The teql master->slaves singly linked list is not protected against
multiple writes. It can be mod'ed concurently from teql_master_xmit(),
teql_dequeue(), teql_init() and teql_destroy() without holding any list
lock or RCU protection.
zdi-disclosures@trendmicro.com has demonstrated that the qdisc is freed
after an RCU grace period, but teql_master_xmit() running on another
CPU can still hold a stale pointer into the list, resulting in a
slab-use-after-free:
BUG: KASAN: slab-use-after-free in teql_master_xmit+0xf0f/0x16b0
Read of size 8 at addr ffff888013fb0440 by task poc/332
Freed 512-byte region [ffff888013fb0400, ffff888013fb0600) (kmalloc-512)
The fix?
Add a per-master slaves_lock spinlock that serializes all mutations of
master->slaves and the NEXT_SLAVE() links in teql_destroy() and
teql_qdisc_init(). teql_master_xmit() also takes the same slaves_lock
around those updates.
Annotate master->slaves and the per-slave ->next pointer with __rcu and
use the appropriate RCU accessors everywhere they are touched:
rcu_assign_pointer() on the writer side (under slaves_lock),
rcu_dereference_protected() for the writer-side loads (also under
slaves_lock), rcu_dereference_bh() for the loads in teql_master_xmit() and
rtnl_dereference() for the loads in teql_master_open()/teql_master_mtu(),
which run under RTNL.
Pair this with rcu_read_lock_bh()/rcu_read_unlock_bh() around the list
traversal in teql_master_xmit(), so that readers either observe a fully
linked list or are deferred until the in-flight mutation completes. The two
early-return paths in teql_master_xmit() are updated to release the RCU-bh
read-side critical section before returning, since leaving it held would
disable BH on that CPU for good. |
| In the Linux kernel, the following vulnerability has been resolved:
eth: fbnic: don't cache shinfo across skb realloc
fbnic_tx_lso() calls skb_cow_head() which may reallocate the skb
including the shared info. We can't use the pointer calculated
before the call.
BUG: KASAN: slab-use-after-free in fbnic_tx_lso.isra.0+0x668/0x8e0
Read of size 4 at addr ff110000262edd98 by task swapper/5/0
Call Trace:
fbnic_tx_lso.isra.0+0x668/0x8e0
fbnic_xmit_frame+0x622/0xba0
dev_hard_start_xmit+0xf4/0x620
Allocated by task 8653:
__alloc_skb+0x11e/0x5f0
alloc_skb_with_frags+0xcc/0x6c0
sock_alloc_send_pskb+0x327/0x3f0
__ip_append_data+0x188b/0x47a0
ip_make_skb+0x24a/0x300
udp_sendmsg+0x14d2/0x21e0
Freed by task 0:
kfree+0x123/0x5a0
pskb_expand_head+0x36c/0xfa0
fbnic_tx_lso.isra.0+0x500/0x8e0
fbnic_xmit_frame+0x622/0xba0
dev_hard_start_xmit+0xf4/0x620
sch_direct_xmit+0x25b/0x1100
The buggy address belongs to the object at ff110000262edc40
which belongs to the cache skbuff_small_head of size 640
The buggy address is located 344 bytes inside of
freed 640-byte region [ff110000262edc40, ff110000262ede |
| In the Linux kernel, the following vulnerability has been resolved:
alloc_tag: fix use-after-free in /proc/allocinfo after module unload
allocinfo_start() only reinitializes the codetag iterator at position 0.
For subsequent reads (position > 0), it reuses cached iterator state from
the previous batch. allocinfo_stop() drops mod_lock between read batches,
which allows module unload to complete and free the module memory that the
cached iterator still references:
CPU0 (read) CPU1 (rmmod)
---- ----
allocinfo_start(pos=0)
down_read(mod_lock)
allocinfo_show()
...
allocinfo_stop()
up_read(mod_lock)
codetag_unload_module()
kfree(cmod)
release_module_tags()
...
free_mod_mem()
allocinfo_start(pos=N)
down_read(mod_lock)
// reuses cached iter, skips re-init
allocinfo_show()
ct->filename <-- UAF
After free_mod_mem() frees the module's .rodata, allocinfo_show()
dereferences ct->filename, ct->function which point there.
Save the iterator state in allocinfo_next() and resume from it in
allocinfo_start() with codetag_next_ct(), which detects module removal via
idr_find() returning NULL and skips to the next module. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: usb-audio: Kill MIDI 2.0 URBs before freeing endpoints
MIDI 2.0 input URBs are started during snd_usb_midi_v2_create(). A
later setup failure can still jump to snd_usb_midi_v2_free(), which
currently frees each endpoint and its coherent URB buffers without first
stopping the submitted URBs. A completion can then dereference the
embedded URB context and endpoint state after they have been freed, or
try to resubmit from the stale endpoint.
This was observed as a KASAN slab-use-after-free in
input_urb_complete().
The buggy scenario involves two paths, with each column showing the order
within that path:
probe error path: USB completion path:
1. start_input_streams() submits 1. The HCD still owns a
input URBs. submitted input URB.
2. A later setup helper returns 2. input_urb_complete() runs
an error. with urb->context in ep.
3. snd_usb_midi_v2_free() frees 3. The completion reads ep
endpoint storage and URB buffers. state and can requeue URBs.
Make the endpoint destructor follow the same teardown ordering used for
disconnect when the endpoint has not already been disconnected: publish
ep->disconnected, kill the URBs synchronously, and drain the endpoint
before freeing URB buffers and endpoint storage. The guard avoids
repeating the stop sequence after the normal
snd_usb_midi_v2_disconnect_all() path, while still synchronizing the
direct MIDI 2.0 create-error free path.
Validation reproduced this kernel report:
BUG: KASAN: slab-use-after-free in input_urb_complete+0x37/0x1b0
Workqueue: usb_hub_wq hub_event
RIP: 0010:_raw_spin_unlock_irq+0x2e/0x50
Read of size 8
Call trace:
dump_stack_lvl+0x77/0xb0
print_report+0xce/0x5f0
input_urb_complete+0x37/0x1b0 (sound/usb/midi2.c:186)
srso_alias_return_thunk+0x5/0xfbef5
__virt_addr_valid+0x19f/0x330
kasan_report+0xe0/0x110
__usb_hcd_giveback_urb+0x112/0x1d0
dummy_timer+0xaaa/0x19a0
lock_is_held_type+0x9a/0x110
__lock_acquire+0x467/0x28b0
mark_held_locks+0x40/0x70
_raw_spin_unlock_irqrestore+0x44/0x60
lockdep_hardirqs_on_prepare+0xbb/0x1a0
__hrtimer_run_queues+0x101/0x520
hrtimer_run_softirq+0xd0/0x130
handle_softirqs+0x15b/0x670
__irq_exit_rcu+0xd0/0x170
irq_exit_rcu+0xe/0x20
sysvec_apic_timer_interrupt+0x6c/0x80
asm_sysvec_apic_timer_interrupt+0x1a/0x20 |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: ipset: fix order of kfree_rcu() and rcu_assign_pointer()
Sashiko pointed out that kfree_rcu() was called before
rcu_assign_pointer() in handling the comment extension.
Fix the order so that rcu_assign_pointer() called first. |
| In the Linux kernel, the following vulnerability has been resolved:
staging: nvec: fix use-after-free in nvec_rx_completed()
In nvec_rx_completed(), when an incomplete RX transfer is detected,
nvec_msg_free() is called to return the message back to the pool by
clearing its 'used' atomic flag. Immediately after this, the code
accesses nvec->rx->data[0] to check the message type.
Since nvec_msg_free() marks the pool slot as available via atomic_set(),
any concurrent or subsequent call to nvec_msg_alloc() could claim that
same slot and overwrite its data[] array. Reading nvec->rx->data[0] after
freeing the message is therefore a use-after-free.
Fix this by saving the message type byte before calling nvec_msg_free(),
then using the saved value for the battery quirk check. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: L2CAP: fix UAF in l2cap_le_connect_rsp
l2cap_le_connect_rsp() obtains a channel via
__l2cap_get_chan_by_ident() but neither holds a reference nor uses
l2cap_chan_hold_unless_zero() before locking and operating on it.
A concurrent l2cap_chan_del() triggered by a remote disconnect can
free the channel between the lookup and l2cap_chan_lock(), causing
a use-after-free.
The BR/EDR counterpart l2cap_connect_rsp() and the sibling handler
l2cap_le_command_rej() already use l2cap_chan_hold_unless_zero()
to safely hold a reference, but l2cap_le_connect_rsp() was left
unprotected.
Fix by adding l2cap_chan_hold_unless_zero() after the ident lookup
and l2cap_chan_put() on the exit path, consistent with other L2CAP
response handlers. |
| In the Linux kernel, the following vulnerability has been resolved:
net: Stop leased rxq before uninstalling its memory provider
netif_rxq_cleanup_unlease() tears down the memory provider that was
installed on a physical RX queue through a netkit queue lease. It
currently revokes the provider's DMA mappings before stopping the
physical queue:
__netif_mp_uninstall_rxq(virt_rxq, p); /* DMA unmap */
__netif_mp_close_rxq(phys_rxq->dev, rxq_idx, p); /* queue stop */
This inverts the ordering used by the regular teardown paths (normal
device unregister and the io_uring zcrx close path), which stop the
queue before revoking the provider's mappings.
With the physical queue still live, its NAPI can keep consuming
net_iov entries from the page_pool alloc cache after the
__netif_mp_uninstall_rxq() has already cleared their dma_addr,
opening a window for the device to DMA to a stale or zero address.
Fix it by swapping the two calls so the queue is stopped (and its
NAPI quiesced) before the provider is uninstalled. No functional
regression was observed across repeated runs of the nk_qlease.py
HW selftest, which exercises the lease teardown path; this was
tested against fbnic QEMU emulation. |
| In the Linux kernel, the following vulnerability has been resolved:
of: reserved_mem: avoid post-init UAF when alloc_reserved_mem_array() fails
The global pointer 'reserved_mem' continues to reference the
reserved_mem_array which lives in __initdata if
alloc_reserved_mem_array() fails. of_reserved_mem_lookup() is
exported for post-init use, that would dereference freed memory
and trigger a use-after-free.
So reset reserved_mem_count to 0 when alloc_reserved_mem_array()
fails. |
| In the Linux kernel, the following vulnerability has been resolved:
configfs_lookup(): don't leave ->s_dentry dangling on failure
Normally ->s_dentry is cleared when dentry it's pointing to becomes
negative (on eviction, realistically). However, that only happens
if dentry gets to be positive in the first place; in case of inode
allocation failure dentry never becomes positive, so ->d_iput()
is not called at all.
We do part of what normally would've been done by configfs_d_iput()
(dropping the reference to configfs_dirent) manually, but we do
not clear ->s_dentry there. Sloppy as it is, it does not matter in
case of configfs_create_{dir,link}() - there configfs_dirent does
not survive dropping the sole reference to it.
However, for configfs_lookup() it *does* survive, with a dangling
pointer to soon to be freed dentry sitting it its ->s_dentry.
Subsequent getdents(2) in that directory will end up dereferencing
that pointer in order to pick the inode number. Use after free...
This is the minimal fix; the right approach is to set the linkage
between dentry and configfs_dirent only after we know that we have
an inode, but that takes more surgery and the bug had been there
since 2006, so... |
| Libevent is an event notification library. Prior to 2.1.13 and 2.2.2-alpha, libevent has a use-after-free in buffer.c when evbuffer_add_buffer_reference processes an output buffer whose out_total_len is zero. evbuffer_free_all_chains frees the initial empty chain without resetting outbuf->first, outbuf->last, or outbuf->last_with_datap, and APPEND_CHAIN_MULTICAST subsequently dereferences the dangling chain pointer. A caller that can drive this buffer state can cause memory corruption or a process crash. This issue is fixed in versions 2.1.13 and 2.2.2-alpha. |
| Use-after-free in the DOM: Core & HTML component. This vulnerability was fixed in Firefox 154, Firefox ESR 140.14, Firefox ESR 153.1, Thunderbird 154, Thunderbird 140.14, and Thunderbird 153.1. |
| Use-after-free in the Graphics: ImageLib component. This vulnerability was fixed in Firefox 154, Firefox ESR 115.39, Firefox ESR 140.14, Firefox ESR 153.1, Thunderbird 154, Thunderbird 140.14, and Thunderbird 153.1. |
| Use-after-free in the Graphics: Text component. This vulnerability was fixed in Firefox 154, Firefox ESR 115.39, Firefox ESR 140.14, Firefox ESR 153.1, Thunderbird 154, Thunderbird 140.14, and Thunderbird 153.1. |
| Use-after-free in the JavaScript: WebAssembly component. This vulnerability was fixed in Firefox 154, Firefox ESR 140.14, Firefox ESR 153.1, Thunderbird 154, Thunderbird 140.14, and Thunderbird 153.1. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix use-after-free in __close_file_table_ids()
A ksmbd_file can remain alive after logical close while another session
holds a temporary reference obtained through ksmbd_lookup_fd_inode().
ksmbd_close_fd() currently marks the file closed and drops the idr-owned
reference, but leaves the pointer published in the closing session's idr
until the final reference is dropped.
If the foreign holder performs the final ksmbd_fd_put(), __put_fd_final()
supplies the foreign session's file table to __ksmbd_close_fd(). The object
is then freed without being removed from its owner's idr, and the owner
session later dereferences the stale pointer during file-table teardown.
Remove the volatile id from the owner's idr while ksmbd_close_fd() still
holds that table's lock, and clear volatile_id before dropping
the idr-owned reference. A later foreign final put then only performs
physical destruction and cannot remove the object from the wrong table. |
| In the Linux kernel, the following vulnerability has been resolved:
rds: tcp: hold the RCU lock across ipv6_chk_addr() in rds_tcp_laddr_check()
rds_tcp_laddr_check() looks up a scoped IPv6 interface with
dev_get_by_index_rcu(), drops the RCU read-side lock, and only then
passes the bare struct net_device * into ipv6_chk_addr().
dev_get_by_index_rcu() only keeps the device alive within the same RCU
read-side section. After rcu_read_unlock(), a concurrent RTM_DELLINK can
free the net_device; ipv6_chk_addr() then dereferences the stale pointer
in __ipv6_chk_addr_and_flags() (e.g. l3mdev_master_dev_rcu(dev)), reading
freed memory.
Keep the RCU read-side lock held across the ipv6_chk_addr() call instead
of dropping it right after the lookup, so the device cannot be freed
while it is in use.
BUG: KASAN: slab-use-after-free in __ipv6_chk_addr_and_flags (... net/ipv6/addrconf.c:1998)
Read of size 8 at addr ffff8880106ec000 by task exploit/153
Call Trace:
...
kasan_report (mm/kasan/report.c:595)
__ipv6_chk_addr_and_flags (... net/ipv6/addrconf.c:1998)
ipv6_chk_addr (net/ipv6/addrconf.c:2031 net/ipv6/addrconf.c:1972)
rds_tcp_laddr_check (net/rds/tcp.c:370)
rds_bind (net/rds/bind.c:248)
__sys_bind (net/socket.c:1920)
__x64_sys_bind (net/socket.c:1956)
do_syscall_64 (arch/x86/entry/syscall_64.c:63)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121) |
| Use after free in Browser in Google Chrome on on Mac prior to 151.0.7922.169 allowed a remote attacker leveraging social engineering to execute arbitrary code outside the sandbox via a crafted HTML page. (Chromium security severity: High) |
| Use after free in WebGL in Google Chrome prior to 151.0.7922.169 allowed a remote attacker to execute arbitrary code inside the sandbox via a crafted HTML page. (Chromium security severity: High) |
